aboutsummaryrefslogtreecommitdiff
path: root/kernel/audit.c
AgeCommit message (Collapse)Author
2005-12-12[PATCH] Add try_to_freeze to kauditdPierre Ossman
kauditd was causing suspends to fail because it refused to freeze. Adding a try_to_freeze() to its sleep loop solves the issue. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Acked-by: Pavel Machek <pavel@suse.cz> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] gfp_t: kernel/*Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08[PATCH] gfp flags annotations - part 1Al Viro
- added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13Merge master.kernel.org:/pub/scm/linux/kernel/git/dwmw2/audit-2.6 Linus Torvalds
2005-08-29[NETLINK]: Add "groups" argument to netlink_kernel_createPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[NETLINK]: Add properly module refcounting for kernel netlink sockets.Harald Welte
- Remove bogus code for compiling netlink as module - Add module refcounting support for modules implementing a netlink protocol - Add support for autoloading modules that implement a netlink protocol as soon as someone opens a socket for that protocol Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-17AUDIT: Prevent duplicate syscall rulesAmy Griffis
The following patch against audit.81 prevents duplicate syscall rules in a given filter list by walking the list on each rule add. I also removed the unused struct audit_entry in audit.c and made the static inlines in auditsc.c consistent. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-18AUDIT: Reduce contention in audit_serial()David Woodhouse
... by generating serial numbers only if an audit context is actually _used_, rather than doing so at syscall entry even when the context isn't necessarily marked auditable. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-15AUDIT: Fix livelock in audit_serial().David Woodhouse
The tricks with atomic_t were bizarre. Just do it sensibly instead. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-13[AUDIT] Fix sparse warning about gfp_mask typeVictor Fusco
Fix the sparse warning "implicit cast to nocast type" Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-02AUDIT: Stop waiting for backlog after audit_panic() happensDavid Woodhouse
We force a rate-limit on auditable events by making them wait for space on the backlog queue. However, if auditd really is AWOL then this could potentially bring the entire system to a halt, depending on the audit rules in effect. Firstly, make sure the wait time is honoured correctly -- it's the maximum time the process should wait, rather than the time to wait _each_ time round the loop. We were getting re-woken _each_ time a packet was dequeued, and the timeout was being restarted each time. Secondly, reset the wait time after audit_panic() is called. In general this will be reset to zero, to allow progress to be made. If the system is configured to _actually_ panic on audit_panic() then that will already have happened; otherwise we know that audit records are being lost anyway. These two tunables can't be exposed via AUDIT_GET and AUDIT_SET because those aren't particularly well-designed. It probably should have been done by sysctls or sysfs anyway -- one for a later patch. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-24AUDIT: Use KERN_NOTICE for printk of audit recordsDavid Woodhouse
They aren't errors. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-24AUDIT: Clean up user message filteringDavid Woodhouse
Don't look up the task by its pid and then use the syscall filtering helper. Just implement our own filter helper which operates solely on the information in the netlink_skb_parms. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-22AUDIT: Remove stray declaration of tsk from audit_receive_msg().David Woodhouse
It's not used any more. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-22AUDIT: Wait for backlog to clear when generating messages.David Woodhouse
Add a gfp_mask to audit_log_start() and audit_log(), to reduce the amount of GFP_ATOMIC allocation -- most of it doesn't need to be GFP_ATOMIC. Also if the mask includes __GFP_WAIT, then wait up to 60 seconds for the auditd backlog to clear instead of immediately abandoning the message. The timeout should probably be made configurable, but for now it'll suffice that it only happens if auditd is actually running. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-22AUDIT: Optimise the audit-disabled case for discarding user messagesDavid Woodhouse
Also exempt USER_AVC message from being discarded to preserve existing behaviour for SE Linux. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-21AUDIT: Spawn kernel thread to list filter rules.David Woodhouse
If we have enough rules to fill the netlink buffer space, it'll deadlock because auditctl isn't ever actually going to read from the socket until we return, and we aren't going to return until it reads... so we spawn a kernel thread to spew out the list and then exit. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-20AUDIT: Drop user-generated messages immediately while auditing disabled.David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-19AUDIT: Allow filtering of user messagesDavid Woodhouse
Turn the field from a bitmask to an enumeration and add a list to allow filtering of messages generated by userspace. We also define a list for file system watches in anticipation of that feature. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-23AUDIT: Unify auid reporting, put arch before syscall numberDavid Woodhouse
These changes make processing of audit logs easier. Based on a patch from Steve Grubb <sgrubb@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21AUDIT: Assign serial number to non-syscall messagesDavid Woodhouse
Move audit_serial() into audit.c and use it to generate serial numbers on messages even when there is no audit context from syscall auditing. This allows us to disambiguate audit records when more than one is generated in the same millisecond. Based on a patch by Steve Grubb after he observed the problem. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21AUDIT: Fix inconsistent use of loginuid vs. auid, signed vs. unsigned Steve Grubb
The attached patch changes all occurrences of loginuid to auid. It also changes everything to %u that is an unsigned type. Signed-off-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21AUDIT: Fix AVC_USER message passing.Steve Grubb
The original AVC_USER message wasn't consolidated with the new range of user messages. The attached patch fixes the kernel so the old messages work again. Signed-off-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19AUDIT: Honour audit_backlog_limit again.David Woodhouse
The limit on the number of outstanding audit messages was inadvertently removed with the switch to queuing skbs directly for sending by a kernel thread. Put it back again. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19AUDIT: Send netlink messages from a separate kernel threadDavid Woodhouse
netlink_unicast() will attempt to reallocate and will free messages if the socket's rcvbuf limit is reached unless we give it an infinite timeout. So do that, from a kernel thread which is dedicated to spewing stuff up the netlink socket. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19AUDIT: Clean up logging of untrusted stringsSteve Grubb
* If vsnprintf returns -1, it will mess up the sk buffer space accounting. This is fixed by not calling skb_put with bogus len values. * audit_log_hex was a loop that called audit_log_vformat with %02X for each character. This is very inefficient since conversion from unsigned character to Ascii representation is essentially masking, shifting, and byte lookups. Also, the length of the converted string is well known - it's twice the original. Fixed by rewriting the function. * audit_log_untrustedstring had no comments. This makes it hard for someone to understand what the string format will be. * audit_log_d_path was never fixed to use untrustedstring. This could mess up user space parsers. This was fixed to make a temp buffer, call d_path, and log temp buffer using untrustedstring. From: Steve Grubb <sgrubb@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-18AUDIT: Treat all user messages identically.David Woodhouse
It's silly to have to add explicit entries for new userspace messages as we invent them. Just treat all messages in the user range the same. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13AUDIT: fix max_t thinko.David Woodhouse
Der... if you use max_t it helps if you give it a type. Note to self: Always just apply the tested patches, don't try to port them by hand. You're not clever enough. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13AUDIT: Fix some spelling errorsSteve Grubb
I'm going through the kernel code and have a patch that corrects several spelling errors in comments. From: Steve Grubb <sgrubb@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13AUDIT: Add message types to audit recordsSteve Grubb
This patch adds more messages types to the audit subsystem so that audit analysis is quicker, intuitive, and more useful. Signed-off-by: Steve Grubb <sgrubb@redhat.com> --- I forgot one type in the big patch. I need to add one for user space originating SE Linux avc messages. This is used by dbus and nscd. -Steve --- Updated to 2.6.12-rc4-mm1. -dwmw2 Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13AUDIT: Round up audit skb expansion to AUDIT_BUFSIZ.David Woodhouse
Otherwise, we will be repeatedly reallocating, even if we're only adding a few bytes at a time. Pointed out by Steve Grubb. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11Add audit_log_typeChris Wright
Add audit_log_type to allow callers to specify type and pid when logging. Convert audit_log to wrapper around audit_log_type. Could have converted all audit_log callers directly, but common case is default of type AUDIT_KERNEL and pid 0. Update audit_log_start to take type and pid values when creating a new audit_buffer. Move sequences that did audit_log_start, audit_log_format, audit_set_type, audit_log_end, to simply call audit_log_type directly. This obsoletes audit_set_type and audit_set_pid, so remove them. Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11Move ifdef CONFIG_AUDITSYSCALL to headerChris Wright
Remove code conditionally dependent on CONFIG_AUDITSYSCALL from audit.c. Move these dependencies to audit.h with the rest. Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11Audit requires CONFIG_NETChris Wright
Audit now actually requires netlink. So make it depend on CONFIG_NET, and remove the inline dependencies on CONFIG_NET. Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11AUDIT: Properly account for alignment difference in nlmsg_len.Chris Wright
Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-10AUDIT: Fix abuse of va_args. David Woodhouse
We're not allowed to use args twice; we need to use va_copy. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-10AUDIT: pass size argument to audit_expand().David Woodhouse
Let audit_expand() know how much it's expected to grow the buffer, in the case that we have that information to hand. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-10AUDIT: Fix reported length of audit messages.Steve Grubb
We were setting nlmsg_len to skb->len, but we should be subtracting the size of the header. From: Steve Grubb <sgrubb@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06AUDIT: Honour gfp_mask in audit_buffer_alloc()David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06AUDIT: buffer audit msgs directly to skbChris Wright
Drop the use of a tmp buffer in the audit_buffer, and just buffer directly to the skb. All header data that was temporarily stored in the audit_buffer can now be stored directly in the netlink header in the skb. Resize skb as needed. This eliminates the extra copy (and the audit_log_move function which was responsible for copying). Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06AUDIT: expand audit tmp buffer as neededChris Wright
Introduce audit_expand and make the audit_buffer use a dynamic buffer which can be resized. When audit buffer is moved to skb it will not be fragmented across skb's, so we can eliminate the sklist in the audit_buffer. During audit_log_move, we simply copy the full buffer into a single skb, and then audit_log_drain sends it on. Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06AUDIT: Add helper functions to allocate and free audit_buffers.Chris Wright
Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06The attached patch addresses the problem with getting the audit daemon Steve Grubb
shutdown credential information. It creates a new message type AUDIT_TERM_INFO, which is used by the audit daemon to query who issued the shutdown. It requires the placement of a hook function that gathers the information. The hook is after the DAC & MAC checks and before the function returns. Racing threads could overwrite the uid & pid - but they would have to be root and have policy that allows signalling the audit daemon. That should be a manageable risk. The userspace component will be released later in audit 0.7.2. When it receives the TERM signal, it queries the kernel for shutdown information. When it receives it, it writes the message and exits. The message looks like this: type=DAEMON msg=auditd(1114551182.000) auditd normal halt, sending pid=2650 uid=525, auditd pid=1685 Signed-off-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-05Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitDavid Woodhouse
2005-05-03[NETLINK]: Synchronous message processing.Herbert Xu
Let's recap the problem. The current asynchronous netlink kernel message processing is vulnerable to these attacks: 1) Hit and run: Attacker sends one or more messages and then exits before they're processed. This may confuse/disable the next netlink user that gets the netlink address of the attacker since it may receive the responses to the attacker's messages. Proposed solutions: a) Synchronous processing. b) Stream mode socket. c) Restrict/prohibit binding. 2) Starvation: Because various netlink rcv functions were written to not return until all messages have been processed on a socket, it is possible for these functions to execute for an arbitrarily long period of time. If this is successfully exploited it could also be used to hold rtnl forever. Proposed solutions: a) Synchronous processing. b) Stream mode socket. Firstly let's cross off solution c). It only solves the first problem and it has user-visible impacts. In particular, it'll break user space applications that expect to bind or communicate with specific netlink addresses (pid's). So we're left with a choice of synchronous processing versus SOCK_STREAM for netlink. For the moment I'm sticking with the synchronous approach as suggested by Alexey since it's simpler and I'd rather spend my time working on other things. However, it does have a number of deficiencies compared to the stream mode solution: 1) User-space to user-space netlink communication is still vulnerable. 2) Inefficient use of resources. This is especially true for rtnetlink since the lock is shared with other users such as networking drivers. The latter could hold the rtnl while communicating with hardware which causes the rtnetlink user to wait when it could be doing other things. 3) It is still possible to DoS all netlink users by flooding the kernel netlink receive queue. The attacker simply fills the receive socket with a single netlink message that fills up the entire queue. The attacker then continues to call sendmsg with the same message in a loop. Point 3) can be countered by retransmissions in user-space code, however it is pretty messy. In light of these problems (in particular, point 3), we should implement stream mode netlink at some point. In the mean time, here is a patch that implements synchronous processing. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-03[PATCH] add new audit data to last skbChris Wright
When adding more formatted audit data to an skb for delivery to userspace, the kernel will attempt to reuse an skb that has spare room. However, if the audit message has already been fragmented to multiple skb's, the search for spare room in the skb uses the head of the list. This will corrupt the audit message with trailing bytes being placed midway through the stream. Fix is to look at the end of the list. Signed-off-by: Chris Wright <chrisw@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29[AUDIT] Requeue messages at head of queue, up to audit_backlogChris Wright
If netlink_unicast() fails, requeue the skb back at the head of the queue it just came from, instead of the tail. And do so unless we've exceeded the audit_backlog limit; not according to some other arbitrary limit. From: Chris Wright <chrisw@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29Add audit uid to netlink credentialsSerge Hallyn
Most audit control messages are sent over netlink.In order to properly log the identity of the sender of audit control messages, we would like to add the loginuid to the netlink_creds structure, as per the attached patch. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29audit: update pointer to userspace tools, remove emacs mode tags
2005-04-29[AUDIT] Avoid using %*.*s format strings.Peter Martuccelli
They don't seem to work correctly (investigation ongoing), but we don't actually need to do it anyway. Patch from Peter Martuccelli <peterm@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>