aboutsummaryrefslogtreecommitdiff
path: root/kernel/futex.c
AgeCommit message (Collapse)Author
2009-01-06Merge branches 'core/futexes', 'core/locking', 'core/rcu' and 'linus' into ↵Ingo Molnar
core/urgent
2009-01-02futex: catch certain assymetric (get|put)_futex_key callsDarren Hart
Impact: add debug check Following up on my previous key reference accounting patches, this patch will catch puts on keys that haven't been "got". This won't catch nested get/put mismatches though. Build and boot tested, with minimal desktop activity and a run of the open_posix_testsuite in LTP for testing. No warnings logged. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-30Merge branch 'core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits) stacktrace: provide save_stack_trace_tsk() weak alias rcu: provide RCU options on non-preempt architectures too printk: fix discarding message when recursion_bug futex: clean up futex_(un)lock_pi fault handling "Tree RCU": scalable classic RCU implementation futex: rename field in futex_q to clarify single waiter semantics x86/swiotlb: add default swiotlb_arch_range_needs_mapping x86/swiotlb: add default phys<->bus conversion x86: unify pci iommu setup and allow swiotlb to compile for 32 bit x86: add swiotlb allocation functions swiotlb: consolidate swiotlb info message printing swiotlb: support bouncing of HighMem pages swiotlb: factor out copy to/from device swiotlb: add arch hook to force mapping swiotlb: allow architectures to override phys<->bus<->phys conversions swiotlb: add comment where we handle the overflow of a dma mask on 32 bit rcu: fix rcutorture behavior during reboot resources: skip sanity check of busy resources swiotlb: move some definitions to header swiotlb: allow architectures to override swiotlb pool allocation ... Fix up trivial conflicts in arch/x86/kernel/Makefile arch/x86/mm/init_32.c include/linux/hardirq.h as per Ingo's suggestions.
2008-12-30futex: make futex_(get|put)_key() calls symmetricDarren Hart
Impact: cleanup This patch makes the calls to futex_get_key_refs() and futex_drop_key_refs() explicitly symmetric by only "putting" keys we successfully "got". Also cleanup a couple return points that didn't "put" after a successful "get". Build and boot tested on an x86_64 system. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-19futex: clean up futex_(un)lock_pi fault handlingDarren Hart
Impact: cleanup Some apparently left over cruft code was complicating the fault logic: Testing if uval != -EFAULT doesn't have any meaning, get_user() sets ret to either 0 or -EFAULT, there's no need to compare uval, especially not against EFAULT which it will never be. This patch removes the superfluous test and clarifies the comment blocks. Build and boot tested on an 8way x86_64 system. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18futex: rename field in futex_q to clarify single waiter semanticsDarren Hart
Impact: simplify code I've tripped over the naming of this field a couple times. The futex_q uses a "waiters" list to represent a single blocked task and then calles wake_up_all(). This can lead to confusion in trying to understand the intent of the code, which is to have a single futex_q for every task waiting on a futex. This patch corrects the problem, using a single pointer to the waiting task, and an appropriate call to wake_up, rather than wake_up_all. Compile and boot tested on an 8way x86_64 machine. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24futex: make clock selectable for FUTEX_WAIT_BITSETThomas Gleixner
FUTEX_WAIT_BITSET could be used instead of FUTEX_WAIT by setting the bit set to FUTEX_BITSET_MATCH_ANY, but FUTEX_WAIT uses CLOCK_REALTIME while FUTEX_WAIT_BITSET uses CLOCK_MONOTONIC. Add a flag to select CLOCK_REALTIME for FUTEX_WAIT_BITSET so glibc can replace the FUTEX_WAIT logic which needs to do gettimeofday() calls before and after the syscall to convert the absolute timeout to a relative timeout for FUTEX_WAIT. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ulrich Drepper <drepper@redhat.com>
2008-11-24Merge branch 'linus' into core/futexesThomas Gleixner
2008-11-14CRED: Use RCU to access another task's creds and to release a task's own credsDavid Howells
Use RCU to access another task's creds and to release a task's own creds. This means that it will be possible for the credentials of a task to be replaced without another task (a) requiring a full lock to read them, and (b) seeing deallocated memory. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14CRED: Separate task security context from task_structDavid Howells
Separate the task security context from task_struct. At this point, the security data is temporarily embedded in the task_struct with two pointers pointing to it. Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in entry.S via asm-offsets. With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14CRED: Wrap task credential accesses in the core kernelDavid Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-audit@redhat.com Cc: containers@lists.linux-foundation.org Cc: linux-mm@kvack.org Signed-off-by: James Morris <jmorris@namei.org>
2008-09-30futex: fixup get_futex_key() for private futexesPeter Zijlstra
With the get_user_pages_fast() patches we made get_futex_key() obtain a reference on the returned key, but failed to do so for private futexes. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30futex: cleanup fsharedPeter Zijlstra
fshared doesn't need to be a rw_sem pointer anymore, so clean that up. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30futex: use fast_gup()Peter Zijlstra
Change the get_user_pages() call with fast_gup() which doesn't require holding the mmap_sem thereby removing the mmap_sem from all fast paths. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30futex: reduce mmap_sem usagePeter Zijlstra
now that we rely on get_user_pages() for the shared key handling move all the mmap_sem stuff closely around the slow paths. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30futex: rely on get_user_pages() for shared futexesPeter Zijlstra
On the way of getting rid of the mmap_sem requirement for shared futexes, start by relying on get_user_pages(). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-11hrtimer: make the futex() system call use the per process slack valueArjan van de Ven
This patch makes the futex() system call use the per process slack value; with this users are able to externally control existing applications to reduce the wakeup rate. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-09-05hrtimer: convert kernel/* to the new hrtimer apisArjan van de Ven
In order to be able to do range hrtimers we need to use accessor functions to the "expire" member of the hrtimer struct. This patch converts kernel/* to these accessors. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2008-06-23futexes: fix fault handling in futex_lock_piThomas Gleixner
This patch addresses a very sporadic pi-futex related failure in highly threaded java apps on large SMP systems. David Holmes reported that the pi_state consistency check in lookup_pi_state triggered with his test application. This means that the kernel internal pi_state and the user space futex variable are out of sync. First we assumed that this is a user space data corruption, but deeper investigation revieled that the problem happend because the pi-futex code is not handling a fault in the futex_lock_pi path when the user space variable needs to be fixed up. The fault happens when a fork mapped the anon memory which contains the futex readonly for COW or the page got swapped out exactly between the unlock of the futex and the return of either the new futex owner or the task which was the expected owner but failed to acquire the kernel internal rtmutex. The current futex_lock_pi() code drops out with an inconsistent in case it faults and returns -EFAULT to user space. User space has no way to fixup that state. When we wrote this code we thought that we could not drop the hash bucket lock at this point to handle the fault. After analysing the code again it turned out to be wrong because there are only two tasks involved which might modify the pi_state and the user space variable: - the task which acquired the rtmutex - the pending owner of the pi_state which did not get the rtmutex Both tasks drop into the fixup_pi_state() function before returning to user space. The first task which acquired the hash bucket lock faults in the fixup of the user space variable, drops the spinlock and calls futex_handle_fault() to fault in the page. Now the second task could acquire the hash bucket lock and tries to fixup the user space variable as well. It either faults as well or it succeeds because the first task already faulted the page in. One caveat is to avoid a double fixup. After returning from the fault handling we reacquire the hash bucket lock and check whether the pi_state owner has been modified already. Reported-by: David Holmes <david.holmes@sun.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Holmes <david.holmes@sun.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> kernel/futex.c | 93 ++++++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 73 insertions(+), 20 deletions(-)
2008-05-05Removal of FUTEX_FDEric Sesterhenn
Since FUTEX_FD was scheduled for removal in June 2007 lets remove it. Google Code search found no users for it and NGPT was abandoned in 2003 according to IBM. futex.h is left untouched to make sure the id does not get reassigned. Since queue_me() has no users left it is commented out to avoid a warning, i didnt remove it completely since it is part of the internal api (matching unqueue_me()) Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (removed rest) Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30add hrtimer specific debugobjects codeThomas Gleixner
hrtimers have now dynamic users in the network code. Put them under debugobjects surveillance as well. Add calls to the generic object debugging infrastructure and provide fixup functions which allow to keep the system alive when recoverable problems have been detected by the object debugging core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-30NULL noise: fs/*, mm/*, kernel/*Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-27Give futex init a proper nameBenjamin Herrenschmidt
The futex init function is called init(). This is a pain in the neck when debugging when you code dies in ... init :-) This renames it to futex_init(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23futex: runtime enable pi and robust functionalityThomas Gleixner
Not all architectures implement futex_atomic_cmpxchg_inatomic(). The default implementation returns -ENOSYS, which is currently not handled inside of the futex guts. Futex PI calls and robust list exits with a held futex result in an endless loop in the futex code on architectures which have no support. Fixing up every place where futex_atomic_cmpxchg_inatomic() is called would add a fair amount of extra if/else constructs to the already complex code. It is also not possible to disable the robust feature before user space tries to register robust lists. Compile time disabling is not a good idea either, as there are already architectures with runtime detection of futex_atomic_cmpxchg_inatomic support. Detect the functionality at runtime instead by calling cmpxchg_futex_value_locked() with a NULL pointer from the futex initialization code. This is guaranteed to fail, but the call of futex_atomic_cmpxchg_inatomic() happens with pagefaults disabled. On architectures, which use the asm-generic implementation or have a runtime CPU feature detection, a -ENOSYS return value disables the PI/robust features. On architectures with a working implementation the call returns -EFAULT and the PI/robust features are enabled. The relevant syscalls return -ENOSYS and the robust list exit code is blocked, when the detection fails. Fixes http://lkml.org/lkml/2008/2/11/149 Originally reported by: Lennart Buytenhek Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Riku Voipio <riku.voipio@movial.fi> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23futex: fix init orderThomas Gleixner
When the futex init code fails to initialize the futex pseudo file system it returns early without initializing the hash queues. Should the boot succeed then a futex syscall which tries to enqueue a waiter on the hashqueue will crash due to the unitilialized plist heads. Initialize the hash queues before the filesystem. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Riku Voipio <riku.voipio@movial.fi> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14hrtimer: check relative timeouts for overflowThomas Gleixner
Various user space callers ask for relative timeouts. While we fixed that overflow issue in hrtimer_start(), the sites which convert relative user space values to absolute timeouts themself were uncovered. Instead of putting overflow checks into each place add a function which does the sanity checking and convert all affected callers to use it. Thanks to Frans Pop, who reported the problem and tested the fixes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Tested-by: Frans Pop <elendil@planet.nl>
2008-02-01futex: Add bitset conditional wait/wakeup functionalityThomas Gleixner
To allow the implementation of optimized rw-locks in user space, glibc needs a possibility to select waiters for wakeup depending on a bitset mask. This requires two new futex OPs: FUTEX_WAIT_BITS and FUTEX_WAKE_BITS These OPs are basically the same as FUTEX_WAIT and FUTEX_WAKE plus an additional argument - a bitset. Further the FUTEX_WAIT_BITS OP is expecting an absolute timeout value instead of the relative one, which is used for the FUTEX_WAIT OP. FUTEX_WAIT_BITS calls into the kernel with a bitset. The bitset is stored in the futex_q structure, which is used to enqueue the waiter into the hashed futex waitqueue. FUTEX_WAKE_BITS also calls into the kernel with a bitset. The wakeup function logically ANDs the bitset with the bitset stored in each waiters futex_q structure. If the result is zero (i.e. none of the set bits in the bitsets is matching), then the waiter is not woken up. If the result is not zero (i.e. one of the set bits in the bitsets is matching), then the waiter is woken. The bitset provided by the caller must be non zero. In case the provided bitset is zero the kernel returns EINVAL. Internaly the new OPs are only extensions to the existing FUTEX_WAIT and FUTEX_WAKE functions. The existing OPs hand a bitset with all bits set into the futex_wait() and futex_wake() functions. Signed-off-by: Thomas Gleixner <tgxl@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01futex: Remove warn on in return fixup pathThomas Gleixner
The WARN_ON() in the fixup return path of futex_lock_pi() can trigger with false positives. The following scenario happens: t1 holds the futex and t2 and t3 are blocked on the kernel side rt_mutex. t1 releases the futex (and the rt_mutex) and assigned t2 to be the next owner of the futex. t2 is interrupted and returns w/o acquiring the rt_mutex, before t1 can release the rtmutex. t1 releases the rtmutex and t3 becomes the pending owner of the rtmutex. t2 notices that it is the designated owner (user space variable) and fails to acquire the rt_mutex via trylock, because it is not allowed to steal the rt_mutex from t3. Now it looks at the rt_mutex pending owner (t3) and assigns the futex and the pi_state to it. During the fixup t4 steals the rtmutex from t3. t2 returns from the fixup and the owner of the rt_mutex has changed from t3 to t4. There is no need to do another round of fixups from t2. The important part (t2 is not returning as the user space visible owner) is done. The further fixups are done, before either t3 or t4 return to user space. For the user space it is not relevant which task (t3 or t4) is the real owner, as long as those are both in the kernel, which is guaranteed by the serialization of the hash bucket lock. Both tasks (which ever returns first to userspace - t4 because it locked the rt_mutex or t3 due to a signal) are going through the lock_futex_pi() return path where the ownership is fixed before the return to user space. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01hrtimer: fix hrtimer_init_sleeper() usersPeter Zijlstra
this patch: commit 37bb6cb4097e29ffee970065b74499cbf10603a3 Author: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Fri Jan 25 21:08:32 2008 +0100 hrtimer: unlock hrtimer_wakeup Broke hrtimer_init_sleeper() users. It forgot to fix up the futex caller of this function to detect the failed queueing and messed up the do_nanosleep() caller in that it could leak a TASK_INTERRUPTIBLE state. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-08futex: Prevent stale futex owner when interrupted/timeoutThomas Gleixner
Roland Westrelin did a great analysis of a long standing thinko in the return path of futex_lock_pi. While we fixed the lock steal case long ago, which was easy to trigger, we never had a test case which exposed this problem and stupidly never thought about the reverse lock stealing scenario and the return to user space with a stale state. When a blocked tasks returns from rt_mutex_timed_locked without holding the rt_mutex (due to a signal or timeout) and at the same time the task holding the futex is releasing the futex and assigning the ownership of the futex to the returning task, then it might happen that a third task acquires the rt_mutex before the final rt_mutex_trylock() of the returning task happens under the futex hash bucket lock. The returning task returns to user space with ETIMEOUT or EINTR, but the user space futex value is assigned to this task. The task which acquired the rt_mutex fixes the user space futex value right after the hash bucket lock has been released by the returning task, but for a short period of time the user space value is wrong. Detailed description is available at: https://bugzilla.redhat.com/show_bug.cgi?id=400541 The fix for this is the same as we do when the rt_mutex was acquired by a higher priority task via lock stealing from the designated new owner. In that case we already fix the user space value and the internal pi_state up before we return. This mechanism can be used to fixup the above corner case as well. When the returning task, which failed to acquire the rt_mutex, notices that it is the designated owner of the futex, then it fixes up the stale user space value and the pi_state, before returning to user space. This happens with the futex hash bucket lock held, so the task which acquired the rt_mutex is guaranteed to be blocked on the hash bucket lock. We can access the rt_mutex owner, which gives us the pid of the new owner, safely here as the owner is not able to modify (release) it while waiting on the hash bucket lock. Rename the "curr" argument of fixup_pi_state_owner() to "newowner" to avoid confusion with current and add the check for the stale state into the failure path of rt_mutex_trylock() in the return path of unlock_futex_pi(). If the situation is detected use fixup_pi_state_owner() to assign everything to the owner of the rt_mutex. Pointed-out-and-tested-by: Roland Westrelin <roland.westrelin@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05futex: correctly return -EFAULT not -EINVALThomas Gleixner
return -EFAULT not -EINVAL. Found by review. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-05futex: fix for futex_wait signal stack corruptionSteven Rostedt
David Holmes found a bug in the -rt tree with respect to pthread_cond_timedwait. After trying his test program on the latest git from mainline, I found the bug was there too. The bug he was seeing that his test program showed, was that if one were to do a "Ctrl-Z" on a process that was in the pthread_cond_timedwait, and then did a "bg" on that process, it would return with a "-ETIMEDOUT" but early. That is, the timer would go off early. Looking into this, I found the source of the problem. And it is a rather nasty bug at that. Here's the relevant code from kernel/futex.c: (not in order in the file) [...] smlinkage long sys_futex(u32 __user *uaddr, int op, u32 val, struct timespec __user *utime, u32 __user *uaddr2, u32 val3) { struct timespec ts; ktime_t t, *tp = NULL; u32 val2 = 0; int cmd = op & FUTEX_CMD_MASK; if (utime && (cmd == FUTEX_WAIT || cmd == FUTEX_LOCK_PI)) { if (copy_from_user(&ts, utime, sizeof(ts)) != 0) return -EFAULT; if (!timespec_valid(&ts)) return -EINVAL; t = timespec_to_ktime(ts); if (cmd == FUTEX_WAIT) t = ktime_add(ktime_get(), t); tp = &t; } [...] return do_futex(uaddr, op, val, tp, uaddr2, val2, val3); } [...] long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, u32 __user *uaddr2, u32 val2, u32 val3) { int ret; int cmd = op & FUTEX_CMD_MASK; struct rw_semaphore *fshared = NULL; if (!(op & FUTEX_PRIVATE_FLAG)) fshared = &current->mm->mmap_sem; switch (cmd) { case FUTEX_WAIT: ret = futex_wait(uaddr, fshared, val, timeout); [...] static int futex_wait(u32 __user *uaddr, struct rw_semaphore *fshared, u32 val, ktime_t *abs_time) { [...] struct restart_block *restart; restart = &current_thread_info()->restart_block; restart->fn = futex_wait_restart; restart->arg0 = (unsigned long)uaddr; restart->arg1 = (unsigned long)val; restart->arg2 = (unsigned long)abs_time; restart->arg3 = 0; if (fshared) restart->arg3 |= ARG3_SHARED; return -ERESTART_RESTARTBLOCK; [...] static long futex_wait_restart(struct restart_block *restart) { u32 __user *uaddr = (u32 __user *)restart->arg0; u32 val = (u32)restart->arg1; ktime_t *abs_time = (ktime_t *)restart->arg2; struct rw_semaphore *fshared = NULL; restart->fn = do_no_restart_syscall; if (restart->arg3 & ARG3_SHARED) fshared = &current->mm->mmap_sem; return (long)futex_wait(uaddr, fshared, val, abs_time); } So when the futex_wait is interrupt by a signal we break out of the hrtimer code and set up or return from signal. This code does not return back to userspace, so we set up a RESTARTBLOCK. The bug here is that we save the "abs_time" which is a pointer to the stack variable "ktime_t t" from sys_futex. This returns and unwinds the stack before we get to call our signal. On return from the signal we go to futex_wait_restart, where we update all the parameters for futex_wait and call it. But here we have a problem where abs_time is no longer valid. I verified this with print statements, and sure enough, what abs_time was set to ends up being garbage when we get to futex_wait_restart. The solution I did to solve this (with input from Linus Torvalds) was to add unions to the restart_block to allow system calls to use the restart with specific parameters. This way the futex code now saves the time in a 64bit value in the restart block instead of storing it on the stack. Note: I'm a bit nervious to add "linux/types.h" and use u32 and u64 in thread_info.h, when there's a #ifdef __KERNEL__ just below that. Not sure what that is there for. If this turns out to be a problem, I've tested this with using "unsigned int" for u32 and "unsigned long long" for u64 and it worked just the same. I'm using u32 and u64 just to be consistent with what the futex code uses. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05kernel/futex.c: make 3 functions staticAdrian Bunk
The following functions can now become static again: - get_futex_key() - get_futex_key_refs() - drop_futex_key_refs() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-19Uninline find_task_by_xxx set of functionsPavel Emelyanov
The find_task_by_something is a set of macros are used to find task by pid depending on what kind of pid is proposed - global or virtual one. All of them are wrappers above the most generic one - find_task_by_pid_type_ns() - and just substitute some args for it. It turned out, that dereferencing the current->nsproxy->pid_ns construction and pushing one more argument on the stack inline cause kernel text size to grow. This patch moves all this stuff out-of-line into kernel/pid.c. Together with the next patch it saves a bit less than 400 bytes from the .text section. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: changes to show virtual ids to userPavel Emelyanov
This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18sparse pointer use of zero as nullStephen Hemminger
Get rid of sparse related warnings from places that use integer as NULL pointer. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Ian Kent <raven@themaw.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17change inotifyfs magic as the same magic is used for futexfsAndrey Mirkin
Right now futexfs and inotifyfs have one magic 0xBAD1DEA, that looks a little bit confusing. Use 0xBAD1DEA as magic for futexfs and 0x2BAD1DEA as magic for inotifyfs. Signed-off-by: Andrey Mirkin <major@openvz.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-01robust futex thread exit raceMartin Schwidefsky
Calling handle_futex_death in exit_robust_list for the different robust mutexes of a thread basically frees the mutex. Another thread might grab the lock immediately which updates the next pointer of the mutex. fetch_robust_entry over the next pointer might therefore branch into the robust mutex list of a different thread. This can cause two problems: 1) some mutexes held by the dead thread are not getting freed and 2) some mutexs held by a different thread are freed. The next point need to be read before calling handle_futex_death. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22futex_unlock_pi() hurts my brain and may cause application deadlockjohn stultz
Avoid futex_unlock_pi returning -EFAULT (which results in deadlock), by clearing uval before jumping to retry_locked. Signed-off-by: John Stultz <johnstul@us.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31futex: pass nr_wake2 to futex_wake_opAndreas Schwab
The fourth argument of sys_futex is ignored when op == FUTEX_WAKE_OP, but futex_wake_op expects it as its nr_wake2 parameter. The only user of this operation in glibc is always passing 1, so this bug had no consequences so far. Signed-off-by: Andreas Schwab <schwab@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ulrich Drepper <drepper@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19mm: fault feedback #2Nick Piggin
This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16FUTEX: Tidy up the codeThomas Gleixner
The recent PRIVATE and REQUEUE_PI changes to the futex code made it hard to read. Tidy it up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24FUTEX: Restore the dropped ERSCH fixThomas Gleixner
The return value of futex_find_get_task() needs to be -ESRCH in case that the search fails. This was part of the original futex fixes and got accidentally dropped, when the futex-tidy-up patch was split out. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Stable Team <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-18Revert "futex_requeue_pi optimization"Thomas Gleixner
This reverts commit d0aa7a70bf03b9de9e995ab272293be1f7937822. It not only introduced user space visible changes to the futex syscall, it is also non-functional and there is no way to fix it proper before the 2.6.22 release. The breakage report ( http://lkml.org/lkml/2007/5/12/17 ) went unanswered, and unfortunately it turned out that the concept is not feasible at all. It violates the rtmutex semantics badly by introducing a virtual owner, which hacks around the coupling of the user-space pi_futex and the kernel internal rt_mutex representation. At the moment the only safe option is to remove it fully as it contains user-space visible changes to broken kernel code, which we do not want to expose in the 2.6.22 release. The patch reverts the original patch mostly 1:1, but contains a couple of trivial manual cleanups which were necessary due to patches, which touched the same area of code later. Verified against the glibc tests and my own PI futex tests. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Ulrich Drepper <drepper@redhat.com> Cc: Pierre Peiffer <pierre.peiffer@bull.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08pi-futex: fix exit races and locking problemsAlexey Kuznetsov
1. New entries can be added to tsk->pi_state_list after task completed exit_pi_state_list(). The result is memory leakage and deadlocks. 2. handle_mm_fault() is called under spinlock. The result is obvious. 3. results in self-inflicted deadlock inside glibc. Sometimes futex_lock_pi returns -ESRCH, when it is not expected and glibc enters to for(;;) sleep() to simulate deadlock. This problem is quite obvious and I think the patch is right. Though it looks like each "if" in futex_lock_pi() got some stupid special case "else if". :-) 4. sometimes futex_lock_pi() returns -EDEADLK, when nobody has the lock. The reason is also obvious (see comment in the patch), but correct fix is far beyond my comprehension. I guess someone already saw this, the chunk: if (rt_mutex_trylock(&q.pi_state->pi_mutex)) ret = 0; is obviously from the same opera. But it does not work, because the rtmutex is really taken at this point: wake_futex_pi() of previous owner reassigned it to us. My fix works. But it looks very stupid. I would think about removal of shift of ownership in wake_futex_pi() and making all the work in context of process taking lock. From: Thomas Gleixner <tglx@linutronix.de> Fix 1) Avoid the tasklist lock variant of the exit race fix by adding an additional state transition to the exit code. This fixes also the issue, when a task with recursive segfaults is not able to release the futexes. Fix 2) Cleanup the lookup_pi_state() failure path and solve the -ESRCH problem finally. Fix 3) Solve the fixup_pi_state_owner() problem which needs to do the fixup in the lock protected section by using the in_atomic userspace access functions. This removes also the ugly lock drop / unqueue inside of fixup_pi_state() Fix 4) Fix a stale lock in the error path of futex_wake_pi() Added some error checks for verification. The -EDEADLK problem is solved by the rtmutex fixups. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09FUTEX: new PRIVATE futexesEric Dumazet
Analysis of current linux futex code : -------------------------------------- A central hash table futex_queues[] holds all contexts (futex_q) of waiting threads. Each futex_wait()/futex_wait() has to obtain a spinlock on a hash slot to perform lookups or insert/deletion of a futex_q. When a futex_wait() is done, calling thread has to : 1) - Obtain a read lock on mmap_sem to be able to validate the user pointer (calling find_vma()). This validation tells us if the futex uses an inode based store (mapped file), or mm based store (anonymous mem) 2) - compute a hash key 3) - Atomic increment of reference counter on an inode or a mm_struct 4) - lock part of futex_queues[] hash table 5) - perform the test on value of futex. (rollback is value != expected_value, returns EWOULDBLOCK) (various loops if test triggers mm faults) 6) queue the context into hash table, release the lock got in 4) 7) - release the read_lock on mmap_sem <block> 8) Eventually unqueue the context (but rarely, as this part  may be done by the futex_wake()) Futexes were designed to improve scalability but current implementation has various problems : - Central hashtable : This means scalability problems if many processes/threads want to use futexes at the same time. This means NUMA unbalance because this hashtable is located on one node. - Using mmap_sem on every futex() syscall : Even if mmap_sem is a rw_semaphore, up_read()/down_read() are doing atomic ops on mmap_sem, dirtying cache line : - lot of cache line ping pongs on SMP configurations. mmap_sem is also extensively used by mm code (page faults, mmap()/munmap()) Highly threaded processes might suffer from mmap_sem contention. mmap_sem is also used by oprofile code. Enabling oprofile hurts threaded programs because of contention on the mmap_sem cache line. - Using an atomic_inc()/atomic_dec() on inode ref counter or mm ref counter: It's also a cache line ping pong on SMP. It also increases mmap_sem hold time because of cache misses. Most of these scalability problems come from the fact that futexes are in one global namespace. As we use a central hash table, we must make sure they are all using the same reference (given by the mm subsystem). We chose to force all futexes be 'shared'. This has a cost. But fact is POSIX defined PRIVATE and SHARED, allowing clear separation, and optimal performance if carefuly implemented. Time has come for linux to have better threading performance. The goal is to permit new futex commands to avoid : - Taking the mmap_sem semaphore, conflicting with other subsystems. - Modifying a ref_count on mm or an inode, still conflicting with mm or fs. This is possible because, for one process using PTHREAD_PROCESS_PRIVATE futexes, we only need to distinguish futexes by their virtual address, no matter the underlying mm storage is. If glibc wants to exploit this new infrastructure, it should use new _PRIVATE futex subcommands for PTHREAD_PROCESS_PRIVATE futexes. And be prepared to fallback on old subcommands for old kernels. Using one global variable with the FUTEX_PRIVATE_FLAG or 0 value should be OK. PTHREAD_PROCESS_SHARED futexes should still use the old subcommands. Compatibility with old applications is preserved, they still hit the scalability problems, but new applications can fly :) Note : the same SHARED futex (mapped on a file) can be used by old binaries *and* new binaries, because both binaries will use the old subcommands. Note : Vast majority of futexes should be using PROCESS_PRIVATE semantic, as this is the default semantic. Almost all applications should benefit of this changes (new kernel and updated libc) Some bench results on a Pentium M 1.6 GHz (SMP kernel on a UP machine) /* calling futex_wait(addr, value) with value != *addr */ 433 cycles per futex(FUTEX_WAIT) call (mixing 2 futexes) 424 cycles per futex(FUTEX_WAIT) call (using one futex) 334 cycles per futex(FUTEX_WAIT_PRIVATE) call (mixing 2 futexes) 334 cycles per futex(FUTEX_WAIT_PRIVATE) call (using one futex) For reference : 187 cycles per getppid() call 188 cycles per umask() call 181 cycles per ni_syscall() call Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Pierre Peiffer <pierre.peiffer@bull.net> Cc: "Ulrich Drepper" <drepper@gmail.com> Cc: "Nick Piggin" <nickpiggin@yahoo.com.au> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09futex_requeue_pi optimizationPierre Peiffer
This patch provides the futex_requeue_pi functionality, which allows some threads waiting on a normal futex to be requeued on the wait-queue of a PI-futex. This provides an optimization, already used for (normal) futexes, to be used with the PI-futexes. This optimization is currently used by the glibc in pthread_broadcast, when using "normal" mutexes. With futex_requeue_pi, it can be used with PRIO_INHERIT mutexes too. Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09Make futex_wait() use an hrtimer for timeoutPierre Peiffer
This patch modifies futex_wait() to use an hrtimer + schedule() in place of schedule_timeout(). schedule_timeout() is tick based, therefore the timeout granularity is the tick (1 ms, 4 ms or 10 ms depending on HZ). By using a high resolution timer for timeout wakeup, we can attain a much finer timeout granularity (in the microsecond range). This parallels what is already done for futex_lock_pi(). The timeout passed to the syscall is no longer converted to jiffies and is therefore passed to do_futex() and futex_wait() as an absolute ktime_t therefore keeping nanosecond resolution. Also this removes the need to pass the nanoseconds timeout part to futex_lock_pi() in val2. In futex_wait(), if there is no timeout then a regular schedule() is performed. Otherwise, an hrtimer is fired before schedule() is called. [akpm@linux-foundation.org: fix `make headers_check'] Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09futex priority based wakeupPierre Peiffer
Today, all threads waiting for a given futex are woken in FIFO order (first waiter woken first) instead of priority order. This patch makes use of plist (pirotity ordered lists) instead of simple list in futex_hash_bucket. All non-RT threads are stored with priority MAX_RT_PRIO, causing them to be woken last, in FIFO order (RT-threads are woken first, in priority order). Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08futex: restartable futex_waitNick Piggin
LTP test sigaction_16_24 fails, because it expects sem_wait to be restarted if SA_RESTART is set. sem_wait is implemented with futex_wait, that currently doesn't support being restarted. Ulrich confirms that the call should be restartable. Implement a restart_block method to handle the relative timeout, and allow restarts. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>