aboutsummaryrefslogtreecommitdiff
path: root/kernel/power/snapshot.c
AgeCommit message (Collapse)Author
2009-09-22mm: don't use alloc_bootmem_low() where not strictly neededJan Beulich
Since alloc_bootmem() will never return inaccessible (via virtual addressing) memory anyway, using the ..._low() variant only makes sense when the physical address range of the allocated memory must fulfill further constraints, espacially since on 64-bits (or more generally in all cases where the pools the two variants allocate from are than the full available range. Probably the use in alloc_tce_table() could also be eliminated (based on code inspection of pci-calgary_64.c), but that seems too risky given I know nothing about that hardware and have no way to test it. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-14PM: Trivial fixesWu Fengguang
Fix the definition of BM_BITS_PER_BLOCK and kerneldoc description of create_bm_block_list(). [rjw: Added changelog.] Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-09-14PM / Hibernate / Memory hotplug: Always use for_each_populated_zone()Gerald Schaefer
Use for_each_populated_zone() instead of for_each_zone() in hibernation code. This fixes a bug on s390, where we allow both config options HIBERNATION and MEMORY_HOTPLUG, so that we also have a ZONE_MOVABLE here. We only allow hibernation if no memory hotplug operation was performed, so in fact both features can only be used exclusively, but this way we don't need 2 differently configured (distribution) kernels. If we have an unpopulated ZONE_MOVABLE, we allow hibernation but run into a BUG_ON() in memory_bm_test/set/clear_bit() because hibernation code iterates through all zones, not only the populated zones, in several places. For example, swsusp_free() does for_each_zone() and then checks for pfn_valid(), which is true even if the zone is not populated, resulting in a BUG_ON() later because the pfn cannot be found in the memory bitmap. Replacing all occurences of for_each_zone() in hibernation code with for_each_populated_zone() would fix this issue. [rjw: Rebased on top of linux-next hibernation patches.] Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-09-14PM/Hibernate: Do not try to allocate too much memory too hard (rev. 2)Rafael J. Wysocki
We want to avoid attempting to free too much memory too hard during hibernation, so estimate the minimum size of the image to use as the lower limit for preallocating memory. The approach here is based on the (experimental) observation that we can't free more page frames than the sum of: * global_page_state(NR_SLAB_RECLAIMABLE) * global_page_state(NR_ACTIVE_ANON) * global_page_state(NR_INACTIVE_ANON) * global_page_state(NR_ACTIVE_FILE) * global_page_state(NR_INACTIVE_FILE) minus * global_page_state(NR_FILE_MAPPED) Namely, if this number is subtracted from the number of saveable pages in the system, we get a good estimate of the minimum reasonable size of a hibernation image. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Wu Fengguang <fengguang.wu@intel.com>
2009-09-14PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)Rafael J. Wysocki
Since the hibernation code is now going to use allocations of memory to make enough room for the image, it can also use the page frames allocated at this stage as image page frames. The low-level hibernation code needs to be rearranged for this purpose, but it allows us to avoid freeing a great number of pages and allocating these same pages once again later, so it generally is worth doing. [rev. 2: Take highmem into account correctly.] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-09-14PM/Hibernate: Rework shrinking of memoryRafael J. Wysocki
Rework swsusp_shrink_memory() so that it calls shrink_all_memory() just once to make some room for the image and then allocates memory to apply more pressure to the memory management subsystem, if necessary. Unfortunately, we don't seem to be able to drop shrink_all_memory() entirely just yet, because that would lead to huge performance regressions in some test cases. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz>
2009-06-12PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2)Rafael J. Wysocki
A future patch is going to modify the memory shrinking code so that it will make memory allocations to free memory instead of using an artificial memory shrinking mechanism for that. For this purpose it is convenient to move swsusp_shrink_memory() from kernel/power/swsusp.c to kernel/power/snapshot.c, because the new memory-shrinking code is going to use things that are local to kernel/power/snapshot.c . [rev. 2: Make some functions static and remove their headers from kernel/power/power.h] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Wu Fengguang <fengguang.wu@intel.com>
2009-04-01mm: introduce for_each_populated_zone() macroKOSAKI Motohiro
Impact: cleanup In almost cases, for_each_zone() is used with populated_zone(). It's because almost function doesn't need memoryless node information. Therefore, for_each_populated_zone() can help to make code simplify. This patch has no functional change. [akpm@linux-foundation.org: small cleanup] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-19Hibernate: Replace unnecessary evaluation of pfn_to_page()Rafael J. Wysocki
Replace one evaluation of pfn_to_page() in copy_data_pages() with the value of a local variable containing the right number already. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-19Hibernate: Take overlapping zones into account (rev. 2)Rafael J. Wysocki
It has been requested to make hibernation work with memory hotplugging enabled and for this purpose the hibernation code has to be reworked to take the possible overlapping of zones into account. Thus, rework the hibernation memory bitmaps code to prevent duplication of PFNs from occuring and add checks to make sure that one page frame will not be marked as saveable many times. Additionally, use list.h lists instead of open-coded lists to implement the memory bitmaps. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-19Hibernate: Do not oops on resume if image data are incorrectRafael J. Wysocki
During resume from hibernation using the userland interface image data are being passed from the used space process to the kernel. These data need not be valid, but currently the kernel sometimes oopses if it gets invalid image data, which is wrong. Make the kernel return error codes to the user space in such cases. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-24pm: hibernation: simplify memory bitmapAkinobu Mita
This patch simplifies the memory bitmap manipulations. - remove the member size in struct bm_block It is not necessary for struct bm_block to have the number of bit chunks that can be calculated by using end_pfn and start_pfn. - use find_next_bit() for memory_bm_next_pfn No need to invent the bitmap library only for the memory bitmap. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-11Hibernation: Fix mark_nosave_pages()Rafael J. Wysocki
There is a problem in the hibernation code that triggers on some NUMA systems on which pfn_valid() returns 'true' for some PFNs that don't belong to any zone. Namely, there is a BUG_ON() in memory_bm_find_bit() that triggers for PFNs not belonging to any zone and passing the pfn_valid() test. On the affected systems it triggers when we mark PFNs reported by the platform as not saveable, because the PFNs in question belong to a region mapped directly using iorepam() (i.e. the ACPI data area) and they pass the pfn_valid() test. Modify memory_bm_find_bit() so that it returns an error if given PFN doesn't belong to any zone instead of crashing the kernel and ignore the result returned by it in mark_nosave_pages(), while marking the "nosave" memory regions. This doesn't affect the hibernation functionality, as we won't touch the PFNs in question anyway. http://bugzilla.kernel.org/show_bug.cgi?id=9966 . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-21Hibernation: Handle DEBUG_PAGEALLOC on x86Rafael J. Wysocki
Make hibernation work with CONFIG_DEBUG_PAGEALLOC set on x86, by checking if the pages to be copied are marked as present in the kernel mapping and temporarily marking them as present if that's not the case. No functional modifications are introduced if CONFIG_DEBUG_PAGEALLOC is unset. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05Page allocator: clean up pcp draining functionsChristoph Lameter
- Add comments explaing how drain_pages() works. - Eliminate useless functions - Rename drain_all_local_pages to drain_all_pages(). It does drain all pages not only those of the local processor. - Eliminate useless interrupt off / on sequences. drain_pages() disables interrupts on its own. The execution thread is pinned to processor by the caller. So there is no need to disable interrupts. - Put drain_all_pages() declaration in gfp.h and remove the declarations from suspend.h and from mm/memory_hotplug.c - Make software suspend call drain_all_pages(). The draining of processor local pages is may not the right approach if software suspend wants to support SMP. If they call drain_all_pages then we can make drain_pages() static. [akpm@linux-foundation.org: fix build] Signed-off-by: Christoph Lameter <clameter@sgi.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Daniel Walker <dwalker@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01Hibernation: Update messagesRafael J. Wysocki
Make hibernation messages start with one common prefix "PM: " and use the word "hibernation" in the messages as a synonym of "suspend to disk". Turn some KERN_INFO messages into debug ones. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01Hibernation: Move function prototypes to headerAdrian Bunk
This patch moves the prototypes of count_highmem_pages() and restore_highmem() to kernel/power/power.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01Hibernation: Introduce SNAPSHOT_GET_IMAGE_SIZE ioctlRafael J. Wysocki
Add a new ioctl, SNAPSHOT_GET_IMAGE_SIZE, returning the size of the (just created) hibernation image, to the hibernation userland interface. This ioctl is necessary so that the userland utilities using the interface need not access the hibernation image header, owned by the kernel, in order to obtain the size of the image. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-20trivial copy_data_pages() tidy upFengguang Wu
Change the loop style of copy_data_pages() to remove a duplicate condition. Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-18Hibernation: Arbitrary boot kernel support - generic codeRafael J. Wysocki
Add the bits needed for supporting arbitrary boot kernels to the common hibernation code. To support arbitrary boot kernels, make it possible to replace the 'struct new_utsname' and the kernel version in the hibernation image header by some architecture specific data that will be used to verify if the image is valid and to restore the image. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11Hibernation: do not try to mark invalid PFNs as nosaveRafael J. Wysocki
On some systems some PFNs reported by the early initialization code as 'nosave' may be invalid. If we try to set the corresponding bits in the hibernation bitmap, BUG_ON() in memory_bm_find_bit() will be triggered and the system won't be able to boot (cf. https://bugzilla.novell.com/show_bug.cgi?id=296242). Prevent this from happening by verifying if the 'nosave' PFNs are valid in mark_nosave_pages(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Further fixes for the removal of 4level-fixup hack from ppc32 [POWERPC] EEH: log all PCI-X and PCI-E AER registers [POWERPC] EEH: capture and log pci state on error [POWERPC] EEH: Split up long error msg [POWERPC] EEH: log error only after driver notification. [POWERPC] fsl_soc: Make mac_addr const in fs_enet_of_init(). [POWERPC] Don't use SLAB/SLUB for PTE pages [POWERPC] Spufs support for 64K LS mappings on 4K kernels [POWERPC] Add ability to 4K kernel to hash in 64K pages [POWERPC] Introduce address space "slices" [POWERPC] Small fixes & cleanups in segment page size demotion [POWERPC] iSeries: Make HVC_ISERIES the default [POWERPC] iSeries: suppress build warning in lparmap.c [POWERPC] Mark pages that don't exist as nosave [POWERPC] swsusp: Introduce register_nosave_region_late
2007-05-09swsusp: clean up printkAndrew Morton
Remove an inexplicable / Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09[POWERPC] swsusp: Introduce register_nosave_region_lateJohannes Berg
This patch introduces a new register_nosave_region_late function that can be called from initcalls when register_nosave_region can no longer be used because it uses bootmem. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07swsusp: use GFP_KERNEL for creating basic data structuresRafael J. Wysocki
Make swsusp call create_basic_memory_bitmaps() before processes are frozen, so that GFP_KERNEL allocations can be made in it. Additionally, ensure that the swsusp's userland interface won't be used while either pm_suspend_disk() or software_resume() is being executed. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07swsusp: do not use page flagsRafael J. Wysocki
Make swsusp use memory bitmaps instead of page flags for marking 'nosave' and free pages. This allows us to 'recycle' two page flags that can be used for other purposes. Also, the memory needed to store the bitmaps is allocated when necessary (ie. before the suspend) and freed after the resume which is more reasonable. The patch is designed to minimize the amount of changes and there are some nice simplifications and optimizations possible on top of it. I am going to implement them separately in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07swsusp: use inline functions for changing page flagsRafael J. Wysocki
Replace direct invocations of SetPageNosave(), SetPageNosaveFree() etc. with calls to inline functions that can be changed in subsequent patches without modifying the code calling them. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02[PATCH] x86: Move swsusp __pa() dependent code to arch portionVivek Goyal
o __pa() should be used only on kernel linearly mapped virtual addresses and not on kernel text and data addresses. o Hibernation code needs to determine the physical address associated with kernel symbol to mark a section boundary which contains pages which don't have to be saved and restored during hibernate/resume operation. o Move this piece of code in arch dependent section. So that architectures which don't have kernel text/data mapped into kernel linearly mapped region can come up with their own ways of determining physical addresses associated with a kernel text. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2007-02-11[PATCH] Use ZVC for free_pagesChristoph Lameter
This is again simplifies some of the VM counter calculations through the use of the ZVC consolidated counters. [michal.k.k.piotrowski@gmail.com: build fix] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-07[PATCH] swsusp: Fix labelsRafael J. Wysocki
Move all labels in the swsusp code to the second column, so that they won't fool diff -p. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@suspend2.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] swsusp: Fix coding style in suspend.cRafael J. Wysocki
Fix coding style in suspend.c. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@suspend2.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] swsusp: Improve handling of highmemRafael J. Wysocki
Currently swsusp saves the contents of highmem pages by copying them to the normal zone which is quite inefficient (eg. it requires two normal pages to be used for saving one highmem page). This may be improved by using highmem for saving the contents of saveable highmem pages. Namely, during the suspend phase of the suspend-resume cycle we try to allocate as many free highmem pages as there are saveable highmem pages. If there are not enough highmem image pages to store the contents of all of the saveable highmem pages, some of them will be stored in the "normal" memory. Next, we allocate as many free "normal" pages as needed to store the (remaining) image data. We use a memory bitmap to mark the allocated free pages (ie. highmem as well as "normal" image pages). Now, we use another memory bitmap to mark all of the saveable pages (highmem as well as "normal") and the contents of the saveable pages are copied into the image pages. Then, the second bitmap is used to save the pfns corresponding to the saveable pages and the first one is used to save their data. During the resume phase the pfns of the pages that were saveable during the suspend are loaded from the image and used to mark the "unsafe" page frames. Next, we try to allocate as many free highmem page frames as to load all of the image data that had been in the highmem before the suspend and we allocate so many free "normal" page frames that the total number of allocated free pages (highmem and "normal") is equal to the size of the image. While doing this we have to make sure that there will be some extra free "normal" and "safe" page frames for two lists of PBEs constructed later. Now, the image data are loaded, if possible, into their "original" page frames. The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in one of two lists of PBEs. One list of PBEs is for the copies of "normal" suspend pages (ie. "normal" pages that were saveable during the suspend) and it is used in the same way as previously (ie. by the architecture-dependent parts of swsusp). The other list of PBEs is for the copies of highmem suspend pages. The pages in this list are restored (in a reversible way) right before the arch-dependent code is called. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02[PATCH] namespaces: utsname: use init_utsname when appropriateSerge E. Hallyn
In some places, particularly drivers and __init code, the init utsns is the appropriate one to use. This patch replaces those with a the init_utsname helper. Changes: Removed several uses of init_utsname(). Hope I picked all the right ones in net/ipv4/ipconfig.c. These are now changed to utsname() (the per-process namespace utsname) in the previous patch (2/7) [akpm@osdl.org: CIFS fix] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] swsusp: Use memory bitmaps during resumeRafael J. Wysocki
Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] swsusp: Introduce memory bitmapsRafael J. Wysocki
Introduce the memory bitmap data structure and make swsusp use in the suspend phase. The current swsusp's internal data structure is not very efficient from the memory usage point of view, so it seems reasonable to replace it with a data structure that will require less memory, such as a pair of bitmaps. The idea is to use bitmaps that may be allocated as sets of individual pages, so that we can avoid making allocations of order greater than 0. For this reason the memory bitmap structure consists of several linked lists of objects that contain pointers to memory pages with the actual bitmap data. Still, for a typical system all of these lists fit in a single page, so it's reasonable to introduce an additional mechanism allowing us to allocate all of them efficiently without sacrificing the generality of the design. This is done with the help of the chain_allocator structure and associated functions. We need to use two memory bitmaps during the suspend phase of the suspend-resume cycle. One of them is necessary for marking the saveable pages, and the second is used to mark the pages in which to store the copies of them (aka image pages). First, the bitmaps are created and we allocate as many image pages as needed (the corresponding bits in the second bitmap are set as soon as the pages are allocated). Second, the bits corresponding to the saveable pages are set in the first bitmap and the saveable pages are copied to the image pages. Finally, the first bitmap is used to save the kernel virtual addresses of the saveable pages and the second one is used to save the contents of the image pages. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] swsusp: Introduce some helpful constantsRafael J. Wysocki
Introduce some constants that hopefully will help improve the readability of code in kernel/power/snapshot.c. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] Change the name of pagedir_nosaveRafael J. Wysocki
The name of the pagedir_nosave variable does not make sense any more, so it seems reasonable to change it to something more meaningful. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] swsusp: Fix alloc_pagedirRafael J. Wysocki
Get rid of the FIXME in kernel/power/snapshot.c#alloc_pagedir() and simplify the functions called by it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] swsusp: Reorder memory-allocating functionsRafael J. Wysocki
Move some functions in kernel/power/snapshot.c to a better place (in the same file) and introduce free_image_page() (will be necessary in the future). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] swsusp: Fix mark_free_pagesRafael J. Wysocki
Clean up mm/page_alloc.c#mark_free_pages() and make it avoid clearing PageNosaveFree for PageNosave pages. This allows us to get rid of an ugly hack in kernel/power/snapshot.c#copy_data_pages(). Additionally, the page-copying loop in copy_data_pages() is moved to an inline function. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] swsusp: struct snapshot_handle cleanupRafael J. Wysocki
Add comments describing struct snapshot_handle and its members, change the confusing name of its member 'page' to 'cur'. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] swsusp: clean up browsing of pfnsRafael J. Wysocki
Clean up some loops over pfns for each zone in snapshot.c: reduce the number of additions to perform, rework detection of saveable pages and make the code a bit less difficult to understand, hopefully. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] swsusp: read speedupAndrew Morton
Implement async reads for swsusp resuming. Crufty old PIII testbox: 15.7 MB/s -> 20.3 MB/s Sony Vaio: 14.6 MB/s -> 33.3 MB/s I didn't implement the post-resume bio_set_pages_dirty(). I don't really understand why resume needs to run set_page_dirty() against these pages. It might be a worry that this code modifies PG_Uptodate, PG_Error and PG_Locked against the image pages. Can this possibly affect the resumed-into kernel? Hopefully not, if we're atomically restoring its mem_map? Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Jens Axboe <axboe@suse.de> Cc: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] swsusp: do not use memcpy for snapshotting memoryRafael J. Wysocki
swsusp should not use memcpy for snapshotting memory, because on some architectures memcpy may increase preempt_count (i386 does this when CONFIG_X86_USE_3DNOW is set). Then, as a result, wrong value of preempt_count is stored in the image. Replace memcpy in copy_data_pages with an open-coded loop. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25Revert "swsusp special saveable pages support" commitsLinus Torvalds
This reverts commits 3e3318dee0878d42ed62a19c292a2ac284135db3 [PATCH] swsusp: x86_64 mark special saveable/unsaveable pages b6370d96e09944c6e3ae8d5743ca8a8ab1f79f6c [PATCH] swsusp: i386 mark special saveable/unsaveable pages ce4ab0012b32c1a4a1d6e934aeb73bf3151c48d9 [PATCH] swsusp: add architecture special saveable pages support because not only do they apparently cause page faults on x86, the infrastructure doesn't compile on powerpc. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] swsusp: use less memory during resumeRafael J. Wysocki
Make swsusp allocate only as much memory as needed to store the image data and metadata during resume. Without this patch swsusp additionally allocates many page frames that will conflict with the "original" locations of the image data and are considered as "unsafe", treating them as "eaten" pages (ie. allocated but unusable). The patch makes swsusp allocate as many pages as it'll need to store the data read from the image in one shot, creating a list of allocated "safe" pages, and use the observation that all pages allocated by it are marked with the PG_nosave and PG_nosave_free flags set.  Namely, when it's about to load an image page, swsusp can check whether the page frame corresponding to the "original" location of this page has been allocated (ie. if the page frame has the PG_nosave and PG_nosave_free flags set) and if so, it can load the page directly into this page frame.  Otherwise it uses an allocated "safe" page from the list to store the data that will be copied to their "original" location later on. This allows us to save many page copyings and page allocations during resume and in the future it may allow us to load images greater than 50% of the normal zone. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: "Pavel Machek" <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] kernel/power/snapshot.c: cleanupsAdrian Bunk
- make needlessly global functions static - make dummy functions static inline Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] swsusp: add architecture special saveable pages supportShaohua Li
1. Add architecture specific pages save/restore support. Next two patches will use this to save/restore 'ACPI NVS' pages. 2. Allow reserved pages 'nosave'. This could avoid save/restore BIOS reserved pages. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Nigel Cunningham <nigel@suspend2.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] swsusp: prevent possible image corruption on resumeRafael J. Wysocki
The function free_pagedir() used by swsusp for freeing its internal data structures clears the PG_nosave and PG_nosave_free flags for each page being freed. However, during resume PG_nosave_free set means that the page in question is "unsafe" (ie. it will be overwritten in the process of restoring the saved system state from the image), so it should not be used for the image data. Therefore free_pagedir() should not clear PG_nosave_free if it's called during resume (otherwise "unsafe" pages freed by it may be used for storing the image data and the data may get corrupted later on). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>