aboutsummaryrefslogtreecommitdiff
path: root/kernel/sched.c
AgeCommit message (Collapse)Author
2006-03-22[PATCH] sched: remove sleep_avg multiplierMike Galbraith
Remove the sleep_avg multiplier. This multiplier was necessary back when we had 10 seconds of dynamic range in sleep_avg, but now that we only have one second, it causes that one second to be compressed down to 100ms in some cases. This is particularly noticeable when compiling a kernel in a slow NFS mount, and I believe it to be a very likely candidate for other recently reported network related interactivity problems. In testing, I can detect no negative impact of this removal. Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-11[PATCH] remove __put_task_struct_cb export againChristoph Hellwig
The patch '[PATCH] RCU signal handling' [1] added an export for __put_task_struct_cb, a put_task_struct helper newly introduced in that patch. But the put_task_struct couldn't be used modular previously as __put_task_struct wasn't exported. There are not callers of it in modular code, and it shouldn't be exported because we don't want drivers to hold references to task_structs. This patch removes the export and folds __put_task_struct into __put_task_struct_cb as there's no other caller. [1] http://www2.kernel.org/git/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e56d090310d7625ecb43a1eeebd479f04affb48b Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08[PATCH] idle threads should have a sane ->timestamp valueIngo Molnar
Idle threads should have a sane ->timestamp value, to avoid init kernel thread(s) from inheriting it and causing miscalculations in try_to_wake_up(). Reported-by: Mike Galbraith <efault@gmx.de>. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-06Add early-boot-safety check to cond_resched()Linus Torvalds
Just to be safe, we should not trigger a conditional reschedule during the early boot sequence. We've historically done some questionable early on, and the safety warnings in __might_sleep() are generally turned off during that period, so there might be problems lurking. This affects CONFIG_PREEMPT_VOLUNTARY, which takes over might_sleep() to cause a voluntary conditional reschedule. Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-17[PATCH] Introduce CONFIG_DEFAULT_MIGRATION_COSTIngo Molnar
Heiko Carstens <heiko.carstens@de.ibm.com> wrote: The boot sequence on s390 sometimes takes ages and we spend a very long time (up to one or two minutes) in calibrate_migration_costs. The time spent there differs from boot to boot. Also the calculated costs differ a lot. I've seen differences by up to a factor of 15 (yes, factor not percent). Also I doubt that making these measurements make much sense on a completely virtualized architecture where you cannot tell how much cpu time you will get anyway. So introduce the CONFIG_DEFAULT_MIGRATION_COST method for an architecture to set the scheduler migration costs. This turns off automatic detection of migration costs. Makes sense on virtual platforms, where migration costs are hard to measure accurately. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14[PATCH] sched: revert "filter affine wakeups"Chen, Kenneth W
Revert commit d7102e95b7b9c00277562c29aad421d2d521c5f6: [PATCH] sched: filter affine wakeups Apparently caused more than 10% performance regression for aim7 benchmark. The setup in use is 16-cpu HP rx8620, 64Gb of memory and 12 MSA1000s with 144 disks. Each disk is 72Gb with a single ext3 filesystem (courtesy of HP, who supplied benchmark results). The problem is, for aim7, the wake-up pattern is random, but it still needs load balancing action in the wake-up path to achieve best performance. With the above commit, lack of load balancing hurts that workload. However, for workloads like database transaction processing, the requirement is exactly opposite. In the wake up path, best performance is achieved with absolutely zero load balancing. We simply wake up the process on the CPU that it was previously run. Worst performance is obtained when we do load balancing at wake up. There isn't an easy way to auto detect the workload characteristics. Ingo's earlier patch that detects idle CPU and decide whether to load balance or not doesn't perform with aim7 either since all CPUs are busy (it causes even bigger perf. regression). Revert commit d7102e95b7b9c00277562c29aad421d2d521c5f6, which causes more than 10% performance regression with aim7. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-10[PATCH] sched: remove smpniceNick Piggin
I don't think the code is quite ready, which is why I asked for Peter's additions to also be merged before I acked it (although it turned out that it still isn't quite ready with his additions either). Basically I have had similar observations to Suresh in that it does not play nicely with the rest of the balancing infrastructure (and raised similar concerns in my review). The samples (group of 4) I got for "maximum recorded imbalance" on a 2x2 SMP+HT Xeon are as follows: | Following boot | hackbench 20 | hackbench 40 -----------+----------------+---------------------+--------------------- 2.6.16-rc2 | 30,37,100,112 | 5600,5530,6020,6090 | 6390,7090,8760,8470 +nosmpnice | 3, 2, 4, 2 | 28, 150, 294, 132 | 348, 348, 294, 347 Hackbench raw performance is down around 15% with smpnice (but that in itself isn't a huge deal because it is just a benchmark). However, the samples show that the imbalance passed into move_tasks is increased by about a factor of 10-30. I think this would also go some way to explaining latency blips turning up in the balancing code (though I haven't actually measured that). We'll probably have to revert this in the SUSE kernel. Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Williams <pwil3058@bigpond.net.au> Cc: "Martin J. Bligh" <mbligh@aracnet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[PATCH] sched: only print migration_cost once per bootChuck Ebbert
migration_cost prints after every CPU hotplug event. Make it print only once at boot. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[PATCH] percpu data: only iterate over possible CPUsEric Dumazet
percpu_data blindly allocates bootmem memory to store NR_CPUS instances of cpudata, instead of allocating memory only for possible cpus. As a preparation for changing that, we need to convert various 0 -> NR_CPUS loops to use for_each_cpu(). (The above only applies to users of asm-generic/percpu.h. powerpc has gone it alone and is presently only allocating memory for present CPUs, so it's currently corrupting memory). Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Cc: Anton Blanchard <anton@samba.org> Acked-by: William Irwin <wli@holomorphy.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] sys_sched_getaffinity() & hotplugJack Steiner
Change sched_getaffinity() so that it returns a bitmap that indicates the legally schedulable cpus that a task is allowed to run on. Without this patch, if CONFIG_HOTPLUG_CPU is enabled, sched_getaffinity() unconditionally returns (at least on IA64) a mask with NR_CPUS bits set. This conveys no useful infornmation except for a kernel compile option. This fixes a breakage we obseved running recent kernels. We have MPI jobs that use sched_getaffinity() to determine where to place their threads. Placing them on non-existant cpus is problematic :-) Signed-off-by: Jack Steiner <steiner@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Nathan Lynch <ntl@pobox.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31[PATCH] Fix boot-time slowdown for measure_migration_costIngo Molnar
This reduces the amount of time the migration cost calculations cost during bootup. Based on numbers by Tony Luck <tony.luck@intel.com>. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-18[PATCH] fix sched_setscheduler semanticsJason Baron
Currently, a negative policy argument passed into the 'sys_sched_setscheduler()' system call, will return with success. However, the manpage for 'sys_sched_setscheduler' says: EINVAL The scheduling policy is not one of the recognized policies, or the parameter p does not make sense for the policy. Signed-off-by: Jason Baron <jbaron@redhat.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] Unlinline a bunch of other functionsArjan van de Ven
Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] sched: add new SCHED_BATCH policyIngo Molnar
Add a new SCHED_BATCH (3) scheduling policy: such tasks are presumed CPU-intensive, and will acquire a constant +5 priority level penalty. Such policy is nice for workloads that are non-interactive, but which do not want to give up their nice levels. The policy is also useful for workloads that want a deterministic scheduling policy without interactivity causing extra preemptions (between that workload's tasks). Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] sched: filter affine wakeupsakpm@osdl.org
) From: Nick Piggin <nickpiggin@yahoo.com.au> Track the last waker CPU, and only consider wakeup-balancing if there's a match between current waker CPU and the previous waker CPU. This ensures that there is some correlation between two subsequent wakeup events before we move the task. Should help random-wakeup workloads on large SMP systems, by reducing the migration attempts by a factor of nr_cpus. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] scheduler cache-hot-autodetectakpm@osdl.org
) From: Ingo Molnar <mingo@elte.hu> This is the latest version of the scheduler cache-hot-auto-tune patch. The first problem was that detection time scaled with O(N^2), which is unacceptable on larger SMP and NUMA systems. To solve this: - I've added a 'domain distance' function, which is used to cache measurement results. Each distance is only measured once. This means that e.g. on NUMA distances of 0, 1 and 2 might be measured, on HT distances 0 and 1, and on SMP distance 0 is measured. The code walks the domain tree to determine the distance, so it automatically follows whatever hierarchy an architecture sets up. This cuts down on the boot time significantly and removes the O(N^2) limit. The only assumption is that migration costs can be expressed as a function of domain distance - this covers the overwhelming majority of existing systems, and is a good guess even for more assymetric systems. [ People hacking systems that have assymetries that break this assumption (e.g. different CPU speeds) should experiment a bit with the cpu_distance() function. Adding a ->migration_distance factor to the domain structure would be one possible solution - but lets first see the problem systems, if they exist at all. Lets not overdesign. ] Another problem was that only a single cache-size was used for measuring the cost of migration, and most architectures didnt set that variable up. Furthermore, a single cache-size does not fit NUMA hierarchies with L3 caches and does not fit HT setups, where different CPUs will often have different 'effective cache sizes'. To solve this problem: - Instead of relying on a single cache-size provided by the platform and sticking to it, the code now auto-detects the 'effective migration cost' between two measured CPUs, via iterating through a wide range of cachesizes. The code searches for the maximum migration cost, which occurs when the working set of the test-workload falls just below the 'effective cache size'. I.e. real-life optimized search is done for the maximum migration cost, between two real CPUs. This, amongst other things, has the positive effect hat if e.g. two CPUs share a L2/L3 cache, a different (and accurate) migration cost will be found than between two CPUs on the same system that dont share any caches. (The reliable measurement of migration costs is tricky - see the source for details.) Furthermore i've added various boot-time options to override/tune migration behavior. Firstly, there's a blanket override for autodetection: migration_cost=1000,2000,3000 will override the depth 0/1/2 values with 1msec/2msec/3msec values. Secondly, there's a global factor that can be used to increase (or decrease) the autodetected values: migration_factor=120 will increase the autodetected values by 20%. This option is useful to tune things in a workload-dependent way - e.g. if a workload is cache-insensitive then CPU utilization can be maximized by specifying migration_factor=0. I've tested the autodetection code quite extensively on x86, on 3 P3/Xeon/2MB, and the autodetected values look pretty good: Dual Celeron (128K L2 cache): --------------------- migration cost matrix (max_cache_size: 131072, cpu: 467 MHz): --------------------- [00] [01] [00]: - 1.7(1) [01]: 1.7(1) - --------------------- cacheflush times [2]: 0.0 (0) 1.7 (1784008) --------------------- Here the slow memory subsystem dominates system performance, and even though caches are small, the migration cost is 1.7 msecs. Dual HT P4 (512K L2 cache): --------------------- migration cost matrix (max_cache_size: 524288, cpu: 2379 MHz): --------------------- [00] [01] [02] [03] [00]: - 0.4(1) 0.0(0) 0.4(1) [01]: 0.4(1) - 0.4(1) 0.0(0) [02]: 0.0(0) 0.4(1) - 0.4(1) [03]: 0.4(1) 0.0(0) 0.4(1) - --------------------- cacheflush times [2]: 0.0 (33900) 0.4 (448514) --------------------- Here it can be seen that there is no migration cost between two HT siblings (CPU#0/2 and CPU#1/3 are separate physical CPUs). A fast memory system makes inter-physical-CPU migration pretty cheap: 0.4 msecs. 8-way P3/Xeon [2MB L2 cache]: --------------------- migration cost matrix (max_cache_size: 2097152, cpu: 700 MHz): --------------------- [00] [01] [02] [03] [04] [05] [06] [07] [00]: - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [01]: 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [02]: 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [03]: 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) [04]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) [05]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) [06]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) [07]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - --------------------- cacheflush times [2]: 0.0 (0) 19.2 (19281756) --------------------- This one has huge caches and a relatively slow memory subsystem - so the migration cost is 19 msecs. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Cc: <wilder@us.ibm.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Make the cpu_*_maps in kernel/sched.c read mostlyAndi Kleen
They are referred to often so avoid potential false sharing for them. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] move capable() to capability.hRandy.Dunlap
- Move capable() from sched.h to capability.h; - Use <linux/capability.h> where capable() is used (in include/, block/, ipc/, kernel/, a few drivers/, mm/, security/, & sound/; many more drivers/ to go) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] mutex subsystem, more debugging codeIngo Molnar
more mutex debugging: check for held locks during memory freeing, task exit, enable sysrq printouts, etc. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org>
2006-01-08[PATCH] RCU signal handlingIngo Molnar
RCU tasklist_lock and RCU signal handling: send signals RCU-read-locked instead of tasklist_lock read-locked. This is a scalability improvement on SMP and a preemption-latency improvement under PREEMPT_RCU. Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: William Irwin <wli@holomorphy.com> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] m68k: introduce setup_thread_stack() and end_of_stack()Al Viro
encapsulates the rest of arch-dependent operations with thread_info access. Two new helpers - setup_thread_stack() and end_of_stack(). For normal case the former consists of copying thread_info of parent to new thread_info and the latter returns pointer immediately past the end of thread_info. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] m68k: introduce task_thread_infoAl Viro
new helper - task_thread_info(task). On platforms that have thread_info allocated separately (i.e. in default case) it simply returns task->thread_info. m68k wants (and for good reasons) to embed its thread_info into task_struct. So it will (in later patch) have task_thread_info() of its own. For now we just add a macro for generic case and convert existing instances of its body in core kernel to uses of new macro. Obviously safe - all normal architectures get the same preprocessor output they used to get. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] optimize activate_task()Chen, Kenneth W
recalc_task_prio() is called from activate_task() to calculate dynamic priority and interactive credit for the activating task. For real-time scheduling process, all that dynamic calculation is thrown away at the end because rt priority is fixed. Patch to optimize recalc_task_prio() away for rt processes. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <piggin@cyberone.com.au> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: resched and cpu_idle reworkNick Piggin
Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce confusion, and make their semantics rigid. Improves efficiency of resched_task and some cpu_idle routines. * In resched_task: - TIF_NEED_RESCHED is only cleared with the task's runqueue lock held, and as we hold it during resched_task, then there is no need for an atomic test and set there. The only other time this should be set is when the task's quantum expires, in the timer interrupt - this is protected against because the rq lock is irq-safe. - If TIF_NEED_RESCHED is set, then we don't need to do anything. It won't get unset until the task get's schedule()d off. - If we are running on the same CPU as the task we resched, then set TIF_NEED_RESCHED and no further action is required. - If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set after TIF_NEED_RESCHED has been set, then we need to send an IPI. Using these rules, we are able to remove the test and set operation in resched_task, and make clear the previously vague semantics of POLLING_NRFLAG. * In idle routines: - Enter cpu_idle with preempt disabled. When the need_resched() condition becomes true, explicitly call schedule(). This makes things a bit clearer (IMO), but haven't updated all architectures yet. - Many do a test and clear of TIF_NEED_RESCHED for some reason. According to the resched_task rules, this isn't needed (and actually breaks the assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock held). So remove that. Generally one less locked memory op when switching to the idle thread. - Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner most polling idle loops. The above resched_task semantics allow it to be set until before the last time need_resched() is checked before going into a halt requiring interrupt wakeup. Many idle routines simply never enter such a halt, and so POLLING_NRFLAG can be always left set, completely eliminating resched IPIs when rescheduling the idle task. POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: consider migration thread with smp niceCon Kolivas
The intermittent scheduling of the migration thread at ultra high priority makes the smp nice handling see that runqueue as being heavily loaded. The migration thread itself actually handles the balancing so its influence on priority balancing should be ignored. Signed-off-by: Con Kolivas <kernel@kolivas.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: correct smp_nice_biasCon Kolivas
The priority biasing was off by mutliplying the total load by the total priority bias and this ruins the ratio of loads between runqueues. This patch should correct the ratios of loads between runqueues to be proportional to overall load. -2nd attempt. From: Dave Kleikamp <shaggy@austin.ibm.com> This patch fixes a divide-by-zero error that I hit on a two-way i386 machine. rq->nr_running is tested to be non-zero, but may change by the time it is used in the division. Saving the value to a local variable ensures that the same value that is checked is used in the division. Signed-off-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: smp nice bias busy queues on idle rebalanceCon Kolivas
To intensify the 'nice' support across physical cpus on SMP we can bias the loads on idle rebalancing. To prevent idle rebalance from trying to pull tasks from queues that appear heavily loaded we only bias the load if there is more than one task running. Add some minor micro-optimisations and have only one return from __source_load and __target_load functions. Fix the fact that target_load was not biased by priority when type == 0. Signed-off-by: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: account rt tasks in prio_bias()Con Kolivas
Real time tasks' effect on prio_bias should be based on their real time priority level instead of their static_prio which is based on nice. Signed-off-by: Con Kolivas <kernel@kolivas.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: change prio bias only if queuedCon Kolivas
prio_bias should only be adjusted in set_user_nice if p is actually currently queued. Signed-off-by: Con Kolivas <kernel@kolivas.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: implement nice support across physical cpus on SMPCon Kolivas
This patch implements 'nice' support across physical cpus on SMP. It introduces an extra runqueue variable prio_bias which is the sum of the (inverted) static priorities of all the tasks on the runqueue. This is then used to bias busy rebalancing between runqueues to obtain good distribution of tasks of different nice values. By biasing the balancing only during busy rebalancing we can avoid having any significant loss of throughput by not affecting the carefully tuned idle balancing already in place. If all tasks are running at the same nice level this code should also have minimal effect. The code is optimised out in the !CONFIG_SMP case. Signed-off-by: Con Kolivas <kernel@kolivas.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] unexport idle_cpuAdrian Bunk
I didn't find any possible modular usage in the kernel. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] cpu hoptlug: avoid usage of smp_processor_id() in preemptible codeHeiko Carstens
Replace smp_processor_id() with any_online_cpu(cpu_online_map) in order to avoid lots of "BUG: using smp_processor_id() in preemptible [00000001] code:..." messages in case taking a cpu online fails. All the traces start at the last notifier_call_chain(...) in kernel/cpu.c. Since we hold the cpu_control semaphore it shouldn't be any problem to access cpu_online_map. The reason why cpu_up failed is simply that the cpu that was supposed to be taken online wasn't even there. That is because on s390 we never know when a new cpu comes and therefore cpu_possible_map consists of only ones and doesn't reflect reality. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04[PATCH] improve scheduler fairness a bitOleg Nesterov
Do not transfer remaining time slice to another cpu on process exit. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] sched: hardcode non-smp set_cpus_allowedPaul Jackson
Simplify the UP (1 CPU) implementatin of set_cpus_allowed. The one CPU is hardcoded to be cpu 0 - so just test for that bit, and avoid having to pick up the cpu_online_map. Also, unexport cpu_online_map: it was only needed for set_cpus_allowed(). Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29[PATCH] mm: update_hiwaters just in timeHugh Dickins
update_mem_hiwater has attracted various criticisms, in particular from those concerned with mm scalability. Originally it was called whenever rss or total_vm got raised. Then many of those callsites were replaced by a timer tick call from account_system_time. Now Frank van Maarseveen reports that to be found inadequate. How about this? Works for Frank. Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros update_hiwater_rss and update_hiwater_vm. Don't attempt to keep mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually by 1): those are hot paths. Do the opposite, update only when about to lower rss (usually by many), or just before final accounting in do_exit. Handle mm->hiwater_vm in the same way, though it's much less of an issue. Demand that whoever collects these hiwater statistics do the work of taking the maximum with rss or total_vm. And there has been no collector of these hiwater statistics in the tree. The new convention needs an example, so match Frank's usage by adding a VmPeak line above VmSize to /proc/<pid>/status, and also a VmHWM line above VmRSS (High-Water-Mark or High-Water-Memory). There was a particular anomaly during mremap move, that hiwater_vm might be captured too high. A fleeting such anomaly remains, but it's quickly corrected now, whereas before it would stick. What locking? None: if the app is racy then these statistics will be racy, it's not worth any overhead to make them exact. But whenever it suits, hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under page_table_lock (for now) or with preemption disabled (later on): without going to any trouble, minimize the time between reading current values and updating, to minimize those occasions when a racing thread bumps a count up and back down in between. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-26[PATCH] export cpu_online_mapAndrew Morton
With CONFIG_SMP=n: *** Warning: "cpu_online_map" [drivers/firmware/dcdbas.ko] undefined! due to set_cpus_allowed(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13[PATCH] Fix spinlock owner debuggingIngo Molnar
fix up the runqueue lock owner only if we truly did a context-switch with the runqueue lock held. Impacts ia64, mips, sparc64 and arm. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12Mark ia64-specific MCA/INIT scheduler hooks as dangerousLinus Torvalds
..and only enable them for ia64. The functions are only valid when the whole system has been totally stopped and no scheduler activity is ongoing on any CPU, and interrupts are globally disabled. In other words, they aren't useful for anything else. So make sure that nobody can use them by mistake. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] MCA/INIT: scheduler hooksKeith Owens
Scheduler hooks to see/change which process is deemed to be on a cpu. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-10[PATCH] sched: allow the load to grow upto its cpu_powerSiddha, Suresh B
Don't pull tasks from a group if that would cause the group's total load to drop below its total cpu_power (ie. cause the group to start going idle). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] sched: don't kick ALB in the presence of pinned taskSiddha, Suresh B
Jack Steiner brought this issue at my OLS talk. Take a scenario where two tasks are pinned to two HT threads in a physical package. Idle packages in the system will keep kicking migration_thread on the busy package with out any success. We will run into similar scenarios in the presence of CMP/NUMA. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] sched: use cached variable in sys_sched_yield()Renaud Lienhart
In sys_sched_yield(), we cache current->array in the "array" variable, thus there's no need to dereference "current" again later. Signed-Off-By: Renaud Lienhart <renaud.lienhart@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] sched: HT optimisationNick Piggin
If an idle sibling of an HT queue encounters a busy sibling, then make higher level load balancing of the non-idle variety. Performance of multiprocessor HT systems with low numbers of tasks (generally < number of virtual CPUs) can be significantly worse than the exact same workloads when running in non-HT mode. The reason is largely due to poor scheduling behaviour. This patch improves the situation, making the performance gap far less significant on one problematic test case (tbench). Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] sched: less lockingNick Piggin
During periodic load balancing, don't hold this runqueue's lock while scanning remote runqueues, which can take a non trivial amount of time especially on very large systems. Holding the runqueue lock will only help to stabilise ->nr_running, however this doesn't do much to help because tasks being woken will simply get held up on the runqueue lock, so ->nr_running would not provide a really accurate picture of runqueue load in that case anyway. What's more, ->nr_running (and possibly the cpu_load averages) of remote runqueues won't be stable anyway, so load balancing is always an inexact operation. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] sched: less newidle lockingNick Piggin
Similarly to the earlier change in load_balance, only lock the runqueue in load_balance_newidle if the busiest queue found has a nr_running > 1. This will reduce frequency of expensive remote runqueue lock aquisitions in the schedule() path on some workloads. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] sched: fix SMT scheduler latency bugIngo Molnar
William Weston reported unusually high scheduling latencies on his x86 HT box, on the -RT kernel. I managed to reproduce it on my HT box and the latency tracer shows the incident in action: _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / du-2803 3Dnh2 0us : __trace_start_sched_wakeup (try_to_wake_up) .............................................................. ... we are running on CPU#3, PID 2778 gets woken to CPU#1: ... .............................................................. du-2803 3Dnh2 0us : __trace_start_sched_wakeup <<...>-2778> (73 1) du-2803 3Dnh2 0us : _raw_spin_unlock (try_to_wake_up) ................................................ ... still on CPU#3, we send an IPI to CPU#1: ... ................................................ du-2803 3Dnh1 0us : resched_task (try_to_wake_up) du-2803 3Dnh1 1us : smp_send_reschedule (try_to_wake_up) du-2803 3Dnh1 1us : send_IPI_mask_bitmask (smp_send_reschedule) du-2803 3Dnh1 2us : _raw_spin_unlock_irqrestore (try_to_wake_up) ............................................... ... 1 usec later, the IPI arrives on CPU#1: ... ............................................... <idle>-0 1Dnh. 2us : smp_reschedule_interrupt (c0100c5a 0 0) So far so good, this is the normal wakeup/preemption mechanism. But here comes the scheduler anomaly on CPU#1: <idle>-0 1Dnh. 2us : preempt_schedule_irq (need_resched) <idle>-0 1Dnh. 2us : preempt_schedule_irq (need_resched) <idle>-0 1Dnh. 3us : __schedule (preempt_schedule_irq) <idle>-0 1Dnh. 3us : profile_hit (__schedule) <idle>-0 1Dnh1 3us : sched_clock (__schedule) <idle>-0 1Dnh1 4us : _raw_spin_lock_irq (__schedule) <idle>-0 1Dnh1 4us : _raw_spin_lock_irqsave (__schedule) <idle>-0 1Dnh2 5us : _raw_spin_unlock (__schedule) <idle>-0 1Dnh1 5us : preempt_schedule (__schedule) <idle>-0 1Dnh1 6us : _raw_spin_lock (__schedule) <idle>-0 1Dnh2 6us : find_next_bit (__schedule) <idle>-0 1Dnh2 6us : _raw_spin_lock (__schedule) <idle>-0 1Dnh3 7us : find_next_bit (__schedule) <idle>-0 1Dnh3 7us : find_next_bit (__schedule) <idle>-0 1Dnh3 8us : _raw_spin_unlock (__schedule) <idle>-0 1Dnh2 8us : preempt_schedule (__schedule) <idle>-0 1Dnh2 8us : find_next_bit (__schedule) <idle>-0 1Dnh2 9us : trace_stop_sched_switched (__schedule) <idle>-0 1Dnh2 9us : _raw_spin_lock (trace_stop_sched_switched) <idle>-0 1Dnh3 10us : trace_stop_sched_switched <<...>-2778> (73 8c) <idle>-0 1Dnh3 10us : _raw_spin_unlock (trace_stop_sched_switched) <idle>-0 1Dnh1 10us : _raw_spin_unlock (__schedule) <idle>-0 1Dnh. 11us : local_irq_enable_noresched (preempt_schedule_irq) <idle>-0 1Dnh. 11us < (0) we didnt pick up pid 2778! It only gets scheduled much later: <...>-2778 1Dnh2 412us : __switch_to (__schedule) <...>-2778 1Dnh2 413us : __schedule <<idle>-0> (8c 73) <...>-2778 1Dnh2 413us : _raw_spin_unlock (__schedule) <...>-2778 1Dnh1 413us : trace_stop_sched_switched (__schedule) <...>-2778 1Dnh1 414us : _raw_spin_lock (trace_stop_sched_switched) <...>-2778 1Dnh2 414us : trace_stop_sched_switched <<...>-2778> (73 1) <...>-2778 1Dnh2 414us : _raw_spin_unlock (trace_stop_sched_switched) <...>-2778 1Dnh1 415us : trace_stop_sched_switched (__schedule) the reason for this anomaly is the following code in dependent_sleeper(): /* * If a user task with lower static priority than the * running task on the SMT sibling is trying to schedule, * delay it till there is proportionately less timeslice * left of the sibling task to prevent a lower priority * task from using an unfair proportion of the * physical cpu's resources. -ck */ [...] if (((smt_curr->time_slice * (100 - sd->per_cpu_gain) / 100) > task_timeslice(p))) ret = 1; Note that in contrast to the comment above, we dont actually do the check based on static priority, we do the check based on timeslices. But timeslices go up and down, and even highprio tasks can randomly have very low timeslices (just before their next refill) and can thus be judged as 'lowprio' by the above piece of code. This condition is clearly buggy. The correct test is to check for static_prio _and_ to check for the preemption priority. Even on different static priority levels, a higher-prio interactive task should not be delayed due to a higher-static-prio CPU hog. There is a symmetric bug in the 'kick SMT sibling' code of this function as well, which can be solved in a similar way. The patch below (against the current scheduler queue in -mm) fixes both bugs. I have build and boot-tested this on x86 SMT, and nice +20 tasks still get properly throttled - so the dependent-sleeper logic is still in action. btw., these bugs pessimised the SMT scheduler because the 'delay wakeup' property was applied too liberally, so this fix is likely a throughput improvement as well. I separated out a smt_slice() function to make the code easier to read. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] sched: TASK_NONINTERACTIVEIngo Molnar
This patch implements a task state bit (TASK_NONINTERACTIVE), which can be used by blocking points to mark the task's wait as "non-interactive". This does not mean the task will be considered a CPU-hog - the wait will simply not have an effect on the waiting task's priority - positive or negative alike. Right now only pipe_wait() will make use of it, because it's a common source of not-so-interactive waits (kernel compilation jobs, etc.). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] sched cleanupsIngo Molnar
whitespace cleanups. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] sched: make idlest_group/cpu cpus_allowed-awareM.Baris Demiray
Add relevant checks into find_idlest_group() and find_idlest_cpu() to make them return only the groups that have allowed CPUs and allowed CPUs respectively. Signed-off-by: M.Baris Demiray <baris@labristeknoloji.com> Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] sched: run SCHED_NORMAL tasks with real time tasks on SMT siblingsCon Kolivas
The hyperthread aware nice handling currently puts to sleep any non real time task when a real time task is running on its sibling cpu. This can lead to prolonged starvation by having the non real time task pegged to the cpu with load balancing not pulling that task away. Currently we force lower priority hyperthread tasks to run a percentage of time difference based on timeslice differences which is meaningless when comparing real time tasks to SCHED_NORMAL tasks. We can allow non real time tasks to run with real time tasks on the sibling up to per_cpu_gain% if we use jiffies as a counter. Cleanups and micro-optimisations to the relevant code section should make it more understandable as well. Signed-off-by: Con Kolivas <kernel@kolivas.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>