| Age | Commit message (Collapse) | Author |
|---|
|
When the boot tracer can't handle an entry output, it returns 1.
It should return 0 to relay on other output functions.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The tracing engine resets the ring buffer and the tracers touch it
too during self-tests. These self-tests happen during tracers registering
and work against boot tracing which is logging initcalls.
We have to disable tracing self-tests if the boot-tracer is selected.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Bring the entry to choose the boot tracer on the kernel config.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The tracing engine have now to be init in early_initcall to set the
boot tracer. Only the debugfs settings will be initialized at
fs_initcall time.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add the boot/initcall tracer.
It's primary purpose is to be able to trace the initcalls.
It is intended to be used with scripts/bootgraph.pl after some small
improvements.
Note that it is not active after its init. To avoid tracing (and so
crashing) before the whole tracing engine init, you have to explicitly
call start_boot_trace() after do_pre_smp_initcalls() to enable it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
With the recent updates to ftrace, there should not be any failures when
modifying the code. If there is, then we need to warn about it.
This patch has a cleaned up version of the code that I used to discover
that the weak symbols were causing failures.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Replace "none" tracer by the recently created "nop" tracer.
Both are pretty similar except that nop accepts TRACE_PRINT
or TRACE_SPECIAL entries.
And as a consequence, changing the size of the ring buffer now
requires that tracing has already been disabled.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Now that the nop tracer is used as the default tracer by
replacing the "none" tracer, tracing engine depends on it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
If nop tracer is selected, some old entries from the previous tracer
could still be enqueued. Tracing have to be reset.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The functions are already 'extern' anyway, so there's no problem
with linkage. Removing these ifdefs also helps find any potential
compiler errors.
Suggested by Andrew Morton.
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
When CONFIG_DYNAMIC_FTRACE isn't used, neither is mcount_addr. This
patch eliminates that warning.
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
A no-op tracer which can serve two purposes:
1. A template for development of a new tracer.
2. A convenient way to see ftrace_printk() calls without
an irrelevant trace making the output messy.
[ mingo@elte.hu: resolved conflicts ]
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Allow a user to inject a marker (TRACE_PRINT entry) into the trace ring
buffer. The related file operations are derived from code by Frédéric
Weisbecker <fweisbec@gmail.com>.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Also make trace_seq_print_cont() non-static, and add a newline if the
seq buffer can't hold all data.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Offer mmiotrace users a function to inject markers from inside the kernel.
This depends on the trace_vprintk() patch.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
trace_vprintk() for easier implementation of tracer specific *_printk
functions. Add check check for no_tracer, and implement
__ftrace_printk() as a wrapper.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Moves the mmiotrace specific functions from trace.c to
trace_mmiotrace.c. Functions trace_wake_up(), tracing_get_trace_entry(),
and tracing_generic_entry_update() are therefore made available outside
trace.c.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This must be brown paper bag week for Steven Rostedt!
While working on ftrace for PPC, I discovered that the hash locking done
when CONFIG_FTRACE_MCOUNT_RECORD is not set, is totally incorrect.
With a cut and paste error, I had the hash lock macro to lock for both
hash_lock _and_ hash_unlock!
This bug did not affect x86 since this bug was introduced when
CONFIG_FTRACE_MCOUNT_RECORD was added to x86.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
make most of the tracers depend on DEBUG_KERNEL - that's their intended
purpose. (most distributions have DEBUG_KERNEL enabled anyway so this is
not a practical limitation - but it simplifies the tracing menu in the
normal case)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
While profiling the smp behaviour of the scheduler it was needed to know to
which cpu a task got woken.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Currently ftrace_printk only works with the ftrace tracer, switch it to an
iter_ctrl setting so we can make us of them with other tracers too.
[rostedt@redhat.com: tweak to the disable condition]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
An item in the trace buffer that is bigger than one entry may be split
up using the TRACE_CONT entry. This makes it a virtual single entry.
The current code increments the iterator index even while traversing
TRACE_CONT entries, making it look like the iterator is further than
it actually is.
This patch adds code to not increment the iterator index while skipping
over TRACE_CONT entries.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Peter Zijlstra provided me with a nice brown paper bag while letting me know
that I was doing a logical AND and not a binary one, making a condition
true more often than it should be.
Luckily, a false true is handled by the calling function and no harm is
done. But this needs to be fixed regardless.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Currently some of the ftrace output goes skewiff if you have more
than 9 cpus, and some if you have more than 99.
Twiddle with the headers and format strings to make up to 999 cpus
display without causing spacing problems.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch adds indexes into the stack that the functions in the
stack dump were found at. As an added bonus, I also added a diff
to show which function is the most notorious consumer of the stack.
The output now looks like this:
# cat /debug/tracing/stack_trace
Depth Size Location (48 entries)
----- ---- --------
0) 2476 212 blk_recount_segments+0x39/0x59
1) 2264 12 bio_phys_segments+0x16/0x1d
2) 2252 20 blk_rq_bio_prep+0x23/0xaf
3) 2232 12 init_request_from_bio+0x74/0x77
4) 2220 56 __make_request+0x294/0x331
5) 2164 136 generic_make_request+0x34f/0x37d
6) 2028 56 submit_bio+0xe7/0xef
7) 1972 28 submit_bh+0xd1/0xf0
8) 1944 112 block_read_full_page+0x299/0x2a9
9) 1832 8 blkdev_readpage+0x14/0x16
10) 1824 28 read_cache_page_async+0x7e/0x109
11) 1796 16 read_cache_page+0x11/0x49
12) 1780 32 read_dev_sector+0x3c/0x72
13) 1748 48 read_lba+0x4d/0xaa
14) 1700 168 efi_partition+0x85/0x61b
15) 1532 72 rescan_partitions+0x10e/0x266
16) 1460 40 do_open+0x1c7/0x24e
17) 1420 292 __blkdev_get+0x79/0x84
18) 1128 12 blkdev_get+0x12/0x14
19) 1116 20 register_disk+0xd1/0x11e
20) 1096 28 add_disk+0x34/0x90
21) 1068 52 sd_probe+0x2b1/0x366
22) 1016 20 driver_probe_device+0xa5/0x120
23) 996 8 __device_attach+0xd/0xf
24) 988 32 bus_for_each_drv+0x3e/0x68
25) 956 24 device_attach+0x56/0x6c
26) 932 16 bus_attach_device+0x26/0x4d
27) 916 64 device_add+0x380/0x4b4
28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9
29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a
30) 664 36 __scsi_add_device+0x88/0xae
31) 628 44 ata_scsi_scan_host+0x9e/0x21c
32) 584 28 ata_host_register+0x1cb/0x1db
33) 556 24 ata_host_activate+0x98/0xb5
34) 532 192 ahci_init_one+0x9bd/0x9e9
35) 340 20 pci_device_probe+0x3e/0x5e
36) 320 20 driver_probe_device+0xa5/0x120
37) 300 20 __driver_attach+0x3f/0x5e
38) 280 36 bus_for_each_dev+0x40/0x62
39) 244 12 driver_attach+0x19/0x1b
40) 232 28 bus_add_driver+0x9c/0x1af
41) 204 28 driver_register+0x76/0xd2
42) 176 20 __pci_register_driver+0x44/0x71
43) 156 8 ahci_init+0x14/0x16
44) 148 100 _stext+0x42/0x122
45) 48 20 kernel_init+0x175/0x1dc
46) 28 28 kernel_thread_helper+0x7/0x10
The first column is simply an index starting from the inner most function
and counting down to the outer most.
The next column is the location that the function was found on the stack.
The next column is the size of the stack for that function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The mcount record method of ftrace scans objdump for references to mcount.
Using mcount as the reference to test if the calls to mcount being replaced
are indeed calls to mcount, this use of mcount was also caught as a
location to change. Using a variable that points to the mcount address
moves this reference into the data section that is not scanned, and
we do not use a false location to try and modify.
The warn on code was what was used to detect this bug.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This is another tracer using the ftrace infrastructure, that examines
at each function call the size of the stack. If the stack use is greater
than the previous max it is recorded.
You can always see (and set) the max stack size seen. By setting it
to zero will start the recording again. The backtrace is also available.
For example:
# cat /debug/tracing/stack_max_size
1856
# cat /debug/tracing/stack_trace
[<c027764d>] stack_trace_call+0x8f/0x101
[<c021b966>] ftrace_call+0x5/0x8
[<c02553cc>] clocksource_get_next+0x12/0x48
[<c02542a5>] update_wall_time+0x538/0x6d1
[<c0245913>] do_timer+0x23/0xb0
[<c0257657>] tick_do_update_jiffies64+0xd9/0xf1
[<c02576b9>] tick_sched_timer+0x4a/0xad
[<c0250fe6>] __run_hrtimer+0x3e/0x75
[<c02518ed>] hrtimer_interrupt+0xf1/0x154
[<c022c870>] smp_apic_timer_interrupt+0x71/0x84
[<c021b7e9>] apic_timer_interrupt+0x2d/0x34
[<c0238597>] finish_task_switch+0x29/0xa0
[<c05abd13>] schedule+0x765/0x7be
[<c05abfca>] schedule_timeout+0x1b/0x90
[<c05ab4d4>] wait_for_common+0xab/0x101
[<c05ab5ac>] wait_for_completion+0x12/0x14
[<c033cfc3>] blk_execute_rq+0x84/0x99
[<c0402470>] scsi_execute+0xc2/0x105
[<c040250a>] scsi_execute_req+0x57/0x7f
[<c043afe0>] sr_test_unit_ready+0x3e/0x97
[<c043bbd6>] sr_media_change+0x43/0x205
[<c046b59f>] media_changed+0x48/0x77
[<c046b5ff>] cdrom_media_changed+0x31/0x37
[<c043b091>] sr_block_media_changed+0x16/0x18
[<c02b9e69>] check_disk_change+0x1b/0x63
[<c046f4c3>] cdrom_open+0x7a1/0x806
[<c043b148>] sr_block_open+0x78/0x8d
[<c02ba4c0>] do_open+0x90/0x257
[<c02ba869>] blkdev_open+0x2d/0x56
[<c0296a1f>] __dentry_open+0x14d/0x23c
[<c0296b32>] nameidata_to_filp+0x24/0x38
[<c02a1c68>] do_filp_open+0x347/0x626
[<c02967ef>] do_sys_open+0x47/0xbc
[<c02968b0>] sys_open+0x23/0x2b
[<c021aadd>] sysenter_do_call+0x12/0x26
I've tested this on both x86_64 and i386.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
enclose the argument in parenthesis. (especially since we cast it,
which is a high prio operation)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
After disabling FTRACE_MCOUNT_RECORD via a patch, a dormant build
failure surfaced:
kernel/trace/ftrace.c: In function 'ftrace_record_ip':
kernel/trace/ftrace.c:416: error: incompatible type for argument 1 of '_spin_lock_irqsave'
kernel/trace/ftrace.c:433: error: incompatible type for argument 1 of '_spin_lock_irqsave'
Introduced by commit 6dad8e07f4c10b17b038e84d29f3ca41c2e55cd0 ("ftrace:
add necessary locking for ftrace records").
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The new design of pre-recorded mcounts and updating the code outside of
kstop_machine has changed the way the records themselves are protected.
This patch uses the ftrace_lock to protect the records. Note, the lock
still does not need to be taken within calls that are only called via
kstop_machine, since the that code can not run while the spin lock is held.
Also removed the hash_lock needed for the daemon when MCOUNT_RECORD is
configured. Also did a slight cleanup of an unused variable.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
If one of the self tests of ftrace has disabled the function tracer,
do not run the code to convert the mcount calls in modules.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch fixes some mistakes on the tracer in warning messages when
debugfs fails to create tracing files.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: srostedt@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
At OLS I had a lot of interest to be able to have the ftrace buffers
dumped on panic. Usually one would expect to uses kexec and examine
the buffers after a new kernel is loaded. But sometimes the resources
do not permit kdump and kexec, so having an option to still see the
sequence of events up to the crash is very advantageous.
This patch adds the option to have the ftrace buffers dumped to the
console in the latency_trace format on a panic. When the option is set,
the default entries per CPU buffer are lowered to 16384, since the writing
to the serial (if that is the console) may take an awful long time
otherwise.
[
Changes since -v1:
Got alpine to send correctly (as well as spell check working).
Removed config option.
Moved the static variables into ftrace_dump itself.
Gave printk a log level.
]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Based on Randy Dunlap's suggestion, the ftrace_printk kernel-doc belongs
with the ftrace_printk macro that should be used. Not with the
__ftrace_printk internal function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch adds a feature that can help kernel developers debug their
code using ftrace.
int ftrace_printk(const char *fmt, ...);
This records into the ftrace buffer using printf formatting. The entry
size in the buffers are still a fixed length. A new type has been added
that allows for more entries to be used for a single recording.
The start of the print is still the same as the other entries.
It returns the number of characters written to the ftrace buffer.
For example:
Having a module with the following code:
static int __init ftrace_print_test(void)
{
ftrace_printk("jiffies are %ld\n", jiffies);
return 0;
}
Gives me:
insmod-5441 3...1 7569us : ftrace_print_test: jiffies are 4296626666
for the latency_trace file and:
insmod-5441 [03] 1959.370498: ftrace_print_test jiffies are 4296626666
for the trace file.
Note: Only the infrastructure should go into the kernel. It is to help
facilitate debugging for other kernel developers. Calls to ftrace_printk
is not intended to be left in the kernel, and should be frowned upon just
like scattering printks around in the code.
But having this easily at your fingertips helps the debugging go faster
and bugs be solved quicker.
Maybe later on, we can hook this with markers and have their printf format
be sucked into ftrace output.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Some tracers will need to work with more than one entry. In order to do this
the trace_entry structure was split into two fields. One for the start of
all entries, and one to continue an existing entry.
The trace_entry structure now has a "field" entry that consists of the previous
content of the trace_entry, and a "cont" entry that is just a string buffer
the size of the "field" entry.
Thanks to Andrew Morton for suggesting this idea.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
When a mcount pointer is recorded into a table, it is used to add or
remove calls to mcount (replacing them with nops). If the code is removed
via removing a module, the pointers still exist. At modifying the code
a check is always made to make sure the code being replaced is the code
expected. In-other-words, the code being replaced is compared to what
it is expected to be before being replaced.
There is a very small chance that the code being replaced just happens
to look like code that calls mcount (very small since the call to mcount
is relative). To remove this chance, this patch adds ftrace_release to
allow module unloading to remove the pointers to mcount within the module.
Another change for init calls is made to not trace calls marked with
__init. The tracing can not be started until after init is done anyway.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Seems that freed records can appear in the available_filter_functions list.
This patch fixes that.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch enables the loading of the __mcount_section of modules and
changing all the callers of mcount into nops.
The modification is done before the init_module function is called, so
again, we do not need to use kstop_machine to make these changes.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This is the infrastructure to the converting the mcount call sites
recorded by the __mcount_loc section into nops on boot. It also allows
for using these sites to enable tracing as normal. When the __mcount_loc
section is used, the "ftraced" kernel thread is disabled.
This uses the current infrastructure to record the mcount call sites
as well as convert them to nops. The mcount function is kept as a stub
on boot up and not converted to the ftrace_record_ip function. We use the
ftrace_record_ip to only record from the table.
This patch does not handle modules. That comes with a later patch.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch creates a section in the kernel called "__mcount_loc".
This will hold a list of pointers to the mcount relocation for
each call site of mcount.
For example:
objdump -dr init/main.o
[...]
Disassembly of section .text:
0000000000000000 <do_one_initcall>:
0: 55 push %rbp
[...]
000000000000017b <init_post>:
17b: 55 push %rbp
17c: 48 89 e5 mov %rsp,%rbp
17f: 53 push %rbx
180: 48 83 ec 08 sub $0x8,%rsp
184: e8 00 00 00 00 callq 189 <init_post+0xe>
185: R_X86_64_PC32 mcount+0xfffffffffffffffc
[...]
We will add a section to point to each function call.
.section __mcount_loc,"a",@progbits
[...]
.quad .text + 0x185
[...]
The offset to of the mcount call site in init_post is an offset from
the start of the section, and not the start of the function init_post.
The mcount relocation is at the call site 0x185 from the start of the
.text section.
.text + 0x185 == init_post + 0xa
We need a way to add this __mcount_loc section in a way that we do not
lose the relocations after final link. The .text section here will
be attached to all other .text sections after final link and the
offsets will be meaningless. We need to keep track of where these
.text sections are.
To do this, we use the start of the first function in the section.
do_one_initcall. We can make a tmp.s file with this function as a reference
to the start of the .text section.
.section __mcount_loc,"a",@progbits
[...]
.quad do_one_initcall + 0x185
[...]
Then we can compile the tmp.s into a tmp.o
gcc -c tmp.s -o tmp.o
And link it into back into main.o.
ld -r main.o tmp.o -o tmp_main.o
mv tmp_main.o main.o
But we have a problem. What happens if the first function in a section
is not exported, and is a static function. The linker will not let
the tmp.o use it. This case exists in main.o as well.
Disassembly of section .init.text:
0000000000000000 <set_reset_devices>:
0: 55 push %rbp
1: 48 89 e5 mov %rsp,%rbp
4: e8 00 00 00 00 callq 9 <set_reset_devices+0x9>
5: R_X86_64_PC32 mcount+0xfffffffffffffffc
The first function in .init.text is a static function.
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
The lowercase 't' means that set_reset_devices is local and is not exported.
If we simply try to link the tmp.o with the set_reset_devices we end
up with two symbols: one local and one global.
.section __mcount_loc,"a",@progbits
.quad set_reset_devices + 0x10
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
U set_reset_devices
We still have an undefined reference to set_reset_devices, and if we try
to compile the kernel, we will end up with an undefined reference to
set_reset_devices, or even worst, it could be exported someplace else,
and then we will have a reference to the wrong location.
To handle this case, we make an intermediate step using objcopy.
We convert set_reset_devices into a global exported symbol before linking
it with tmp.o and set it back afterwards.
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 T set_reset_devices
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 T set_reset_devices
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
Now we have a section in main.o called __mcount_loc that we can place
somewhere in the kernel using vmlinux.ld.S and access it to convert
all these locations that call mcount into nops before starting SMP
and thus, eliminating the need to do this with kstop_machine.
Note, A well documented perl script (scripts/recordmcount.pl) is used
to do all this in one location.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
do not expose users to CONFIG_TRACEPOINTS - tracers can select it
just fine.
update ftrace to select CONFIG_TRACEPOINTS.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Porting the trace_mark() used by ftrace to tracepoints. (cleanup)
Changelog :
- Change error messages : marker -> tracepoint
[ mingo@elte.hu: conflict resolutions ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: 'Peter Zijlstra' <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: per CPU hrtimers can be migrated from a dead CPU
The hrtimer code has no knowledge about per CPU timers, but we need to
prevent the migration of such timers and warn when such a timer is
active at migration time.
Explicitely mark the timers as per CPU and use a more understandable
mode descriptor for the interrupts safe unlocked callback mode, which
is used by hrtimer_sleeper and the scheduler code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Conflicts:
kernel/stop_machine.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
|
|
Simple conversion.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
|
|
Remove the following warning with CONFIG_TRACING=y:
kernel/trace/trace.c: In function ‘s_next’:
kernel/trace/trace.c:1186: warning: unused variable ‘last_ent’
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ftrace: fix modular build
ftrace: disable tracing on acpi idle calls
ftrace: remove latency-tracer leftover
ftrace: only trace preempt off with preempt tracer
ftrace: fix 4d3702b6 (post-v2.6.26): WARNING: at kernel/lockdep.c:2731 check_flags (ftrace)
|
