aboutsummaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2009-12-15vt: introduce and use vt_kmsg_redirect() functionBernhard Walle
The kernel offers with TIOCL_GETKMSGREDIRECT ioctl() the possibility to redirect the kernel messages to a specific console. However, since it's not possible to switch to the kernel message console after a panic(), it would be nice if the kernel would print the panic message on the current console. This patch series adds a new interface to access the global kmsg_redirect variable by a function to be able to use it in code where CONFIG_VT_CONSOLE is not set (kernel/panic.c). This patch: Instead of using and exporting a global value kmsg_redirect, introduce a function vt_kmsg_redirect() that both can set and return the console where messages are printed. Change all users of kmsg_redirect (the VT code itself and kernel/power.c) to the new interface. The main advantage is that vt_kmsg_redirect() can also be used when CONFIG_VT_CONSOLE is not set. Signed-off-by: Bernhard Walle <bernhard@bwalle.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15kernel/sys.c: fix "warning: do-while statement is not a compound statement" ↵H Hartley Sweeten
noise do_each_thread/while_each_thread wrap a block of code that is in this format: for (...) do ... while If curly braces do not surround the inner loop the following warning is generated by sparse: warning: do-while statement is not a compound statement Fix the warning by adding the braces. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15generic-ipi: cleanup for generic_smp_call_function_interrupt()Xiao Guangrong
Use smp_processor_id() instead of get_cpu() and put_cpu() in generic_smp_call_function_interrupt(), It's no need to disable preempt, because we must call generic_smp_call_function_interrupt() with interrupts disabled. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15'sysctl_max_map_count' should be non-negativeAmerigo Wang
Jan Engelhardt reported we have this problem: setting max_map_count to a value large enough results in programs dying at first try. This is on 2.6.31.6: 15:59 borg:/proc/sys/vm # echo $[1<<31-1] >max_map_count 15:59 borg:/proc/sys/vm # cat max_map_count 1073741824 15:59 borg:/proc/sys/vm # echo $[1<<31] >max_map_count 15:59 borg:/proc/sys/vm # cat max_map_count Killed This is because we have a chance to make 'max_map_count' negative. but it's meaningless. Make it only accept non-negative values. Reported-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: James Morris <jmorris@namei.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15hugetlb: derive huge pages nodes allowed from task mempolicyLee Schermerhorn
This patch derives a "nodes_allowed" node mask from the numa mempolicy of the task modifying the number of persistent huge pages to control the allocation, freeing and adjusting of surplus huge pages when the pool page count is modified via the new sysctl or sysfs attribute "nr_hugepages_mempolicy". The nodes_allowed mask is derived as follows: * For "default" [NULL] task mempolicy, a NULL nodemask_t pointer is produced. This will cause the hugetlb subsystem to use node_online_map as the "nodes_allowed". This preserves the behavior before this patch. * For "preferred" mempolicy, including explicit local allocation, a nodemask with the single preferred node will be produced. "local" policy will NOT track any internode migrations of the task adjusting nr_hugepages. * For "bind" and "interleave" policy, the mempolicy's nodemask will be used. * Other than to inform the construction of the nodes_allowed node mask, the actual mempolicy mode is ignored. That is, all modes behave like interleave over the resulting nodes_allowed mask with no "fallback". See the updated documentation [next patch] for more information about the implications of this patch. Examples: Starting with: Node 0 HugePages_Total: 0 Node 1 HugePages_Total: 0 Node 2 HugePages_Total: 0 Node 3 HugePages_Total: 0 Default behavior [with or without this patch] balances persistent hugepage allocation across nodes [with sufficient contiguous memory]: sysctl vm.nr_hugepages[_mempolicy]=32 yields: Node 0 HugePages_Total: 8 Node 1 HugePages_Total: 8 Node 2 HugePages_Total: 8 Node 3 HugePages_Total: 8 Of course, we only have nr_hugepages_mempolicy with the patch, but with default mempolicy, nr_hugepages_mempolicy behaves the same as nr_hugepages. Applying mempolicy--e.g., with numactl [using '-m' a.k.a. '--membind' because it allows multiple nodes to be specified and it's easy to type]--we can allocate huge pages on individual nodes or sets of nodes. So, starting from the condition above, with 8 huge pages per node, add 8 more to node 2 using: numactl -m 2 sysctl vm.nr_hugepages_mempolicy=40 This yields: Node 0 HugePages_Total: 8 Node 1 HugePages_Total: 8 Node 2 HugePages_Total: 16 Node 3 HugePages_Total: 8 The incremental 8 huge pages were restricted to node 2 by the specified mempolicy. Similarly, we can use mempolicy to free persistent huge pages from specified nodes: numactl -m 0,1 sysctl vm.nr_hugepages_mempolicy=32 yields: Node 0 HugePages_Total: 4 Node 1 HugePages_Total: 4 Node 2 HugePages_Total: 16 Node 3 HugePages_Total: 8 The 8 huge pages freed were balanced over nodes 0 and 1. [rientjes@google.com: accomodate reworked NODEMASK_ALLOC] Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Andi Kleen <andi@firstfloor.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Adam Litke <agl@us.ibm.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Eric Whitney <eric.whitney@hp.com> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15bsdacct: fix uid/gid misreportingAlexey Dobriyan
commit d8e180dcd5bbbab9cd3ff2e779efcf70692ef541 "bsdacct: switch credentials for writing to the accounting file" introduced credential switching during final acct data collecting. However, uid/gid pair continued to be collected from current which became credentials of who created acct file, not who exits. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14676 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: Juho K. Juopperi <jkj@kapsi.fi> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: David Howells <dhowells@redhat.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits) m68k: rename global variable vmalloc_end to m68k_vmalloc_end percpu: add missing per_cpu_ptr_to_phys() definition for UP percpu: Fix kdump failure if booted with percpu_alloc=page percpu: make misc percpu symbols unique percpu: make percpu symbols in ia64 unique percpu: make percpu symbols in powerpc unique percpu: make percpu symbols in x86 unique percpu: make percpu symbols in xen unique percpu: make percpu symbols in cpufreq unique percpu: make percpu symbols in oprofile unique percpu: make percpu symbols in tracer unique percpu: make percpu symbols under kernel/ and mm/ unique percpu: remove some sparse warnings percpu: make alloc_percpu() handle array types vmalloc: fix use of non-existent percpu variable in put_cpu_var() this_cpu: Use this_cpu_xx in trace_functions_graph.c this_cpu: Use this_cpu_xx for ftrace this_cpu: Use this_cpu_xx in nmi handling this_cpu: Use this_cpu operations in RCU this_cpu: Use this_cpu ops for VM statistics ... Fix up trivial (famous last words) global per-cpu naming conflicts in arch/x86/kvm/svm.c mm/slab.c
2009-12-12Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (21 commits) sched: Remove forced2_migrations stats sched: Fix memory leak in two error corner cases sched: Fix build warning in get_update_sysctl_factor() sched: Update normalized values on user updates via proc sched: Make tunable scaling style configurable sched: Fix missing sched tunable recalculation on cpu add/remove sched: Fix task priority bug sched: cgroup: Implement different treatment for idle shares sched: Remove unnecessary RCU exclusion sched: Discard some old bits sched: Clean up check_preempt_wakeup() sched: Move update_curr() in check_preempt_wakeup() to avoid redundant call sched: Sanitize fork() handling sched: Clean up ttwu() rq locking sched: Remove rq->clock coupling from set_task_cpu() sched: Consolidate select_task_rq() callers sched: Remove sysctl.sched_features sched: Protect sched_rr_get_param() access to task->sched_class sched: Protect task->cpus_allowed access in sched_getaffinity() sched: Fix balance vs hotplug race ... Fixed up conflicts in kernel/sysctl.c (due to sysctl cleanup)
2009-12-11Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: itimer: Fix the itimer trace print format hrtimer: move timer stats helper functions to hrtimer.c hrtimer: Tune hrtimer_interrupt hang logic
2009-12-11Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: Avoid out of bounds array reference in save_trace() futex: Take mmap_sem for get_user_pages in fault_in_user_writeable lockstat: Add usage info to Documentation/lockstat.txt lockstat: Fix min, max times in /proc/lock_stats
2009-12-11Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Remove comparing of NULL to va_list in trace_array_vprintk() tracing: Fix function graph trace_pipe to properly display failed entries tracing: Add full state to trace_seq tracing: Buffer the output of seq_file in case of filled buffer tracing: Only call pipe_close if pipe_close is defined tracing: Add pipe_close interface
2009-12-11Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (57 commits) x86, perf events: Check if we have APIC enabled perf_event: Fix variable initialization in other codepaths perf kmem: Fix unused argument build warning perf symbols: perf_header__read_build_ids() offset'n'size should be u64 perf symbols: dsos__read_build_ids() should read both user and kernel buildids perf tools: Align long options which have no short forms perf kmem: Show usage if no option is specified sched: Mark sched_clock() as notrace perf sched: Add max delay time snapshot perf tools: Correct size given to memset perf_event: Fix perf_swevent_hrtimer() variable initialization perf sched: Fix for getting task's execution time tracing/kprobes: Fix field creation's bad error handling perf_event: Cleanup for cpu_clock_perf_event_update() perf_event: Allocate children's perf_event_ctxp at the right time perf_event: Clean up __perf_event_init_context() hw-breakpoints: Modify breakpoints without unregistering them perf probe: Update perf-probe document perf probe: Support --del option trace-kprobe: Support delete probe syntax ...
2009-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (58 commits) tty: split the lock up a bit further tty: Move the leader test in disassociate tty: Push the bkl down a bit in the hangup code tty: Push the lock down further into the ldisc code tty: push the BKL down into the handlers a bit tty: moxa: split open lock tty: moxa: Kill the use of lock_kernel tty: moxa: Fix modem op locking tty: moxa: Kill off the throttle method tty: moxa: Locking clean up tty: moxa: rework the locking a bit tty: moxa: Use more tty_port ops tty: isicom: fix deadlock on shutdown tty: mxser: Use the new locking rules to fix setserial properly tty: mxser: use the tty_port_open method tty: isicom: sort out the board init logic tty: isicom: switch to the new tty_port_open helper tty: tty_port: Add a kref object to the tty port tty: istallion: tty port open/close methods tty: stallion: Convert to the tty_port_open/close methods ...
2009-12-11Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: Always process the whole breakpoint list on activate or deactivate kgdb: continue and warn on signal passing from gdb kgdb,x86: do not set kgdb_single_step on x86 kgdb: allow for cpu switch when single stepping kgdb,i386: Fix corner case access to ss with NMI watch dog exception kgdb: Replace strstr() by strchr() for single-character needles kgdbts: Read buffer overflow kgdb: Read buffer overflow kgdb,x86: remove redundant test
2009-12-11tty: Move the leader test in disassociateAlan Cox
There are two call points, both want to check that tty->signal->leader is set. Move the test into disassociate_ctty() as that will make locking changes easier in a bit Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (109 commits) PCI: fix coding style issue in pci_save_state() PCI: add pci_request_acs PCI: fix BUG_ON triggered by logical PCIe root port removal PCI: remove ifdefed pci_cleanup_aer_correct_error_status PCI: unconditionally clear AER uncorr status register during cleanup x86/PCI: claim SR-IOV BARs in pcibios_allocate_resource PCI: portdrv: remove redundant definitions PCI: portdrv: remove unnecessary struct pcie_port_data PCI: portdrv: minor cleanup for pcie_port_device_register PCI: portdrv: add missing irq cleanup PCI: portdrv: enable device before irq initialization PCI: portdrv: cleanup service irqs initialization PCI: portdrv: check capabilities first PCI: portdrv: move PME capability check PCI: portdrv: remove redundant pcie type calculation PCI: portdrv: cleanup pcie_device registration PCI: portdrv: remove redundant pcie_port_device_probe PCI: Always set prefetchable base/limit upper32 registers PCI: read-modify-write the pcie device control register when initiating pcie flr PCI: show dma_mask bits in /sys ... Fixed up conflicts in: arch/x86/kernel/amd_iommu_init.c drivers/pci/dmar.c drivers/pci/hotplug/acpiphp_glue.c
2009-12-11kgdb: Always process the whole breakpoint list on activate or deactivateJason Wessel
This patch fixes 2 edge cases in using kgdb in conjunction with gdb. 1) kgdb_deactivate_sw_breakpoints() should process the entire array of breakpoints. The failure to do so results in breakpoints that you cannot remove, because a break point can only be removed if its state flag is set to BP_SET. The easy way to duplicate this problem is to plant a break point in a kernel module and then unload the kernel module. 2) kgdb_activate_sw_breakpoints() should process the entire array of breakpoints. The failure to do so results in missed breakpoints when a breakpoint cannot be activated. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2009-12-11kgdb: continue and warn on signal passing from gdbJason Wessel
On some architectures for the segv trap, gdb wants to pass the signal back on continue. For kgdb this is not the default behavior, because it can cause the kernel to crash if you arbitrarily pass back a exception outside of kgdb. Instead of causing instability, pass a message back to gdb about the supported kgdb signal passing and execute a standard kgdb continue operation. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2009-12-11kgdb: allow for cpu switch when single steppingJason Wessel
The kgdb core should not assume that a single step operation of a kernel thread will complete on the same CPU. The single step flag is set at the "thread" level and it is possible in a multi cpu system that a kernel thread can get scheduled on another cpu the next time it is run. As a further safety net in case a slave cpu is hung, the debug master cpu will try 100 times before giving up and assuming control of the slave cpus is no longer possible. It is more useful to be able to get some information out of kgdb instead of spinning forever. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2009-12-11kgdb: Read buffer overflowJason Wessel
Roel Kluin reported an error found with Parfait. Where we want to ensure that that kgdb_info[-1] never gets accessed. Also check to ensure any negative tid does not exceed the size of the shadow CPU array, else report critical debug context because it is an internal kgdb failure. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2009-12-10sched: Remove forced2_migrations statsIngo Molnar
This build warning: kernel/sched.c: In function 'set_task_cpu': kernel/sched.c:2070: warning: unused variable 'old_rq' Made me realize that the forced2_migrations stat looks pretty pointless (and a misnomer) - remove it. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-10Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Add debugobjects support
2009-12-10perf_event: Fix variable initialization in other codepathsXiao Guangrong
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B20BAA6.7010609@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-10sched: Fix memory leak in two error corner casesPhil Carmody
If the second in each of these pairs of allocations fails, then the first one will not be freed in the error route out. Found by a static code analysis tool. Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1260448177-28448-1-git-send-email-ext-phil.2.carmody@nokia.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-10hrtimer: move timer stats helper functions to hrtimer.cHeiko Carstens
There is no reason to make timer_stats_hrtimer_set_start_info and friends visible to the rest of the kernel. So move all of them to hrtimer.c. Also make timer_stats_hrtimer_set_start_info a static inline function so it gets inlined and we avoid another function call. Based on a patch by Thomas Gleixner. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <20091210095629.GC4144@osiris.boeblingen.de.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-12-10hrtimer: Tune hrtimer_interrupt hang logicThomas Gleixner
The hrtimer_interrupt hang logic adjusts min_delta_ns based on the execution time of the hrtimer callbacks. This is error-prone for virtual machines, where a guest vcpu can be scheduled out during the execution of the callbacks (and the callbacks themselves can do operations that translate to blocking operations in the hypervisor), which in can lead to large min_delta_ns rendering the system unusable. Replace the current heuristics with something more reliable. Allow the interrupt code to try 3 times to catch up with the lost time. If that fails use the total time spent in the interrupt handler to defer the next timer interrupt so the system can catch up with other things which got delayed. Limit that deferment to 100ms. The retry events and the maximum time spent in the interrupt handler are recorded and exposed via /proc/timer_list Inspired by a patch from Marcelo. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: kvm@vger.kernel.org
2009-12-10sched: Fix build warning in get_update_sysctl_factor()Mike Galbraith
Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <new-submission>
2009-12-10lockdep: Avoid out of bounds array reference in save_trace()Luck, Tony
ia64 found this the hard way (because we currently have a stub for save_stack_trace() that does nothing). But it would be a good idea to be cautious in case a real save_stack_trace() bailed out with an error before it set trace->nr_entries. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: luming.yu@intel.com LKML-Reference: <4b2024d085302c2a2@agluck-desktop.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-10Merge branch 'tip/tracing/core3' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/core
2009-12-10perf_event: Fix perf_swevent_hrtimer() variable initializationXiao Guangrong
fix: [<c0477471>] ? printk+0x1d/0x24 [<c01c98f9>] ? perf_prepare_sample+0x269/0x280 [<c0149231>] warn_slowpath_common+0x71/0xd0 [<c01c98f9>] ? perf_prepare_sample+0x269/0x280 [<c01492aa>] warn_slowpath_null+0x1a/0x20 [<c01c98f9>] perf_prepare_sample+0x269/0x280 [<c016e9f3>] ? cpu_clock+0x53/0x90 [<c01cc368>] __perf_event_overflow+0x2a8/0x300 [<c01ccc3b>] perf_event_overflow+0x1b/0x30 [<c01ccccf>] perf_swevent_hrtimer+0x7f/0x120 This is because 'data.raw' variable not initialize. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B208E93.1010801@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-09tracing: Remove comparing of NULL to va_list in trace_array_vprintk()Carsten Emde
Olof Johansson stated the following: Comparing a va_list with NULL is bogus. It's supposed to be treated like an opaque type and only be manipulated with va_* accessors. Olof noticed that this code broke the ARM builds: kernel/trace/trace.c: In function 'trace_array_vprintk': kernel/trace/trace.c:1364: error: invalid operands to binary == (have 'va_list' and 'void *') kernel/trace/trace.c: In function 'tracing_mark_write': kernel/trace/trace.c:3349: error: incompatible type for argument 3 of 'trace_vprintk' This patch partly reverts c13d2f7c3231e873f30db92b96c8caa48f100f33 and re-installs the original mark_printk() mechanism. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Carsten Emde <C.Emde@osadl.org> LKML-Reference: <4B1BAB74.104@osadl.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-09tracing: Fix function graph trace_pipe to properly display failed entriesJiri Olsa
There is a case where the graph tracer might get confused and omits displaying of a single record. This applies mostly with the trace_pipe since it is unlikely that the trace_seq buffer will overflow with the trace file. As the function_graph tracer goes through the trace entries keeping a pointer to the current record: current -> func1 ENTRY func2 ENTRY func2 RETURN func1 RETURN When an function ENTRY is encountered, it moves the pointer to the next entry to check if the function is a nested or leaf function. func1 ENTRY current -> func2 ENTRY func2 RETURN func1 RETURN If the rest of the writing of the function fills the trace_seq buffer, then the trace_pipe read will ignore this entry. The next read will Now start at the current location, but the first entry (func1) will be discarded. This patch keeps a copy of the current entry in the iterator private storage and will keep track of when the trace_seq buffer fills. When the trace_seq buffer fills, it will reuse the copy of the entry in the next iteration. [ This patch has been largely modified by Steven Rostedt in order to clean it up and simplify it. The original idea and concept was from Jirka and for that, this patch will go under his name to give him the credit he deserves. But because this was modify by Steven Rostedt anything wrong with the patch should be blamed on Steven. ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1259067458-27143-1-git-send-email-jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-09tracing: Add full state to trace_seqJohannes Berg
The trace_seq buffer might fill up, and right now one needs to check the return value of each printf into the buffer to check for that. Instead, have the buffer keep track of whether it is full or not, and reject more input if it is full or would have overflowed with an input that wasn't added. Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-09tracing: Buffer the output of seq_file in case of filled bufferSteven Rostedt
If the seq_read fills the buffer it will call s_start again on the next itertation with the same position. This causes a problem with the function_graph tracer because it consumes the iteration in order to determine leaf functions. What happens is that the iterator stores the entry, and the function graph plugin will look at the next entry. If that next entry is a return of the same function and task, then the function is a leaf and the function_graph plugin calls ring_buffer_read which moves the ring buffer iterator forward (the trace iterator still points to the function start entry). The copying of the trace_seq to the seq_file buffer will fail if the seq_file buffer is full. The seq_read will not show this entry. The next read by userspace will cause seq_read to again call s_start which will reuse the trace iterator entry (the function start entry). But the function return entry was already consumed. The function graph plugin will think that this entry is a nested function and not a leaf. To solve this, the trace code now checks the return status of the seq_printf (trace_print_seq). If the writing to the seq_file buffer fails, we set a flag in the iterator (leftover) and we do not reset the trace_seq buffer. On the next call to s_start, we check the leftover flag, and if it is set, we just reuse the trace_seq buffer and do not call into the plugin print functions. Before this patch: 2) | fput() { 2) | __fput() { 2) 0.550 us | inotify_inode_queue_event(); 2) | __fsnotify_parent() { 2) 0.540 us | inotify_dentry_parent_queue_event(); After the patch: 2) | fput() { 2) | __fput() { 2) 0.550 us | inotify_inode_queue_event(); 2) 0.548 us | __fsnotify_parent(); 2) 0.540 us | inotify_dentry_parent_queue_event(); [ Updated the patch to fix a missing return 0 from the trace_print_seq() stub when CONFIG_TRACING is disabled. Reported-by: Ingo Molnar <mingo@elte.hu> ] Reported-by: Jiri Olsa <jolsa@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-09tracing: Only call pipe_close if pipe_close is definedSteven Rostedt
This fixes a cut and paste error that had pipe_close get called if pipe_open was defined (not pipe_close). Reported-by: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com> LKML-Reference: <20091209153204.F4CD.A69D9226@jp.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-09Merge branch 'bkl-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'bkl-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sys: Remove BKL from sys_reboot pm_qos: clean up racy global "name" variable pm_qos: remove BKL
2009-12-09tracing/kprobes: Fix field creation's bad error handlingFrederic Weisbecker
When we define the common event fields in kprobe, we invert the error handling and return immediately in case of success. Then we omit to define specific kprobes fields (ip and nargs), and specific kretprobes fields (func, ret_ip, nargs). And we only define them when we fail to create common fields. The most visible consequence is that we can't create filter for k(ret)probes specific fields. This patch re-invert the success/error handling to fix it. Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1260263815-5167-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: Update normalized values on user updates via procChristian Ehrhardt
The normalized values are also recalculated in case the scaling factor changes. This patch updates the internally used scheduler tuning values that are normalized to one cpu in case a user sets new values via sysfs. Together with patch 2 of this series this allows to let user configured values scale (or not) to cpu add/remove events taking place later. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1259579808-11357-4-git-send-email-ehrhardt@linux.vnet.ibm.com> [ v2: fix warning ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: Make tunable scaling style configurableChristian Ehrhardt
As scaling now takes place on all kind of cpu add/remove events a user that configures values via proc should be able to configure if his set values are still rescaled or kept whatever happens. As the comments state that log2 was just a second guess that worked the interface is not just designed for on/off, but to choose a scaling type. Currently this allows none, log and linear, but more important it allwos us to keep the interface even if someone has an even better idea how to scale the values. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1259579808-11357-3-git-send-email-ehrhardt@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: Fix missing sched tunable recalculation on cpu add/removeChristian Ehrhardt
Based on Peter Zijlstras patch suggestion this enables recalculation of the scheduler tunables in response of a change in the number of cpus. It also adds a max of eight cpus that are considered in that scaling. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1259579808-11357-2-git-send-email-ehrhardt@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: Fix task priority bugPeter Zijlstra
83f9ac removed a call to effective_prio() in wake_up_new_task(), which leads to tasks running at MAX_PRIO. This is caused by the idle thread being set to MAX_PRIO before forking off init. O(1) used that to make sure idle was always preempted, CFS uses check_preempt_curr_idle() for that so we can savely remove this bit of legacy code. Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1259754383.4003.610.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: cgroup: Implement different treatment for idle sharesPeter Zijlstra
When setting the weight for a per-cpu task-group, we have to put in a phantom weight when there is no work on that cpu, otherwise we'll not service that cpu when new work gets placed there until we again update the per-cpu weights. We used to add these phantom weights to the total, so that the idle per-cpu shares don't get inflated, this however causes the non-idle parts to get deflated, causing unexpected weight distibutions. Reverse this, so that the non-idle shares are correct but the idle shares are inflated. Reported-by: Yasunori Goto <y-goto@jp.fujitsu.com> Tested-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1257934048.23203.76.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: Remove unnecessary RCU exclusionPeter Zijlstra
As Nick pointed out, and realized by myself when doing: sched: Fix balance vs hotplug race the patch: sched: for_each_domain() vs RCU is wrong, sched_domains are freed after synchronize_sched(), which means disabling preemption is enough. Reported-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: Discard some old bitsPeter Zijlstra
WAKEUP_RUNNING was an experiment, not sure why that ever ended up being merged... Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: Clean up check_preempt_wakeup()Peter Zijlstra
Streamline the wakeup preemption code a bit, unifying the preempt path so that they all do the same. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: Move update_curr() in check_preempt_wakeup() to avoid redundant callJupyung Lee
If a RT task is woken up while a non-RT task is running, check_preempt_wakeup() is called to check whether the new task can preempt the old task. The function returns quickly without going deeper because it is apparent that a RT task can always preempt a non-RT task. In this situation, check_preempt_wakeup() always calls update_curr() to update vruntime value of the currently running task. However, the function call is unnecessary and redundant at that moment because (1) a non-RT task can always be preempted by a RT task regardless of its vruntime value, and (2) update_curr() will be called shortly when the context switch between two occurs. By moving update_curr() in check_preempt_wakeup(), we can avoid redundant call to update_curr(), slightly reducing the time taken to wake up RT tasks. Signed-off-by: Jupyung Lee <jupyung@gmail.com> [ Place update_curr() right before the wake_preempt_entity() call, which is the only thing that relies on the updated vruntime ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1258451500-6714-1-git-send-email-jupyung@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: Sanitize fork() handlingPeter Zijlstra
Currently we try to do task placement in wake_up_new_task() after we do the load-balance pass in sched_fork(). This yields complicated semantics in that we have to deal with tasks on different RQs and the set_task_cpu() calls in copy_process() and sched_fork() Rename ->task_new() to ->task_fork() and call it from sched_fork() before the balancing, this gives the policy a clear point to place the task. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: Clean up ttwu() rq lockingPeter Zijlstra
Since set_task_clock() doesn't rely on rq->clock anymore we can simplyfy the mess in ttwu(). Optimize things a bit by not fiddling with the IRQ state there. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-09sched: Remove rq->clock coupling from set_task_cpu()Peter Zijlstra
set_task_cpu() should be rq invariant and only touch task state, it currently fails to do so, which opens up a few races, since not all callers hold both rq->locks. Remove the relyance on rq->clock, as any site calling set_task_cpu() should also do a remote clock update, which should ensure the observed time between these two cpus is monotonic, as per kernel/sched_clock.c:sched_clock_remote(). Therefore we can simply remove the clock_offset bits and be happy. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>