aboutsummaryrefslogtreecommitdiff
path: root/mm
AgeCommit message (Collapse)Author
2009-03-30Merge branch 'x86-stage-3-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-stage-3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (190 commits) Revert "cpuacct: reduce one NULL check in fast-path" Revert "x86: don't compile vsmp_64 for 32bit" x86: Correct behaviour of irq affinity x86: early_ioremap_init(), use __fix_to_virt(), because we are sure it's safe x86: use default_cpu_mask_to_apicid for 64bit x86: fix set_extra_move_desc calling x86, PAT, PCI: Change vma prot in pci_mmap to reflect inherited prot x86/dmi: fix dmi_alloc() section mismatches x86: e820 fix various signedness issues in setup.c and e820.c x86: apic/io_apic.c define msi_ir_chip and ir_ioapic_chip all the time x86: irq.c keep CONFIG_X86_LOCAL_APIC interrupts together x86: irq.c use same path for show_interrupts x86: cpu/cpu.h cleanup x86: Fix a couple of sparse warnings in arch/x86/kernel/apic/io_apic.c Revert "x86: create a non-zero sized bm_pte only when needed" x86: pci-nommu.c cleanup x86: io_delay.c cleanup x86: rtc.c cleanup x86: i8253 cleanup x86: kdebugfs.c cleanup ...
2009-03-28Merge branch 'linus' into x86/coreIngo Molnar
2009-03-28Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits) [ARM] 5435/1: fix compile warning in sanity_check_meminfo() [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0 [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins imxfb: Fix TFT mode i.MX21/27: remove ifdef CONFIG_FB_IMX imxfb: add clock support mxc: add arch_reset() function clkdev: add possibility to get a clock based on the device name i.MX1: remove fb support from mach-imx [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined Gemini: Add support for Teltonika RUT100 Gemini: gpiolib based GPIO support v2 MAINTAINERS: add myself as Gemini architecture maintainer ARM: Add Gemini architecture v3 [ARM] OMAP: Fix compile for omap2_init_common_hw() MAINTAINERS: Add myself as Faraday ARM core variant maintainer ARM: Add support for FA526 v2 [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h [ARM] collie: fix two minor formatting nits ...
2009-03-28Merge branch 'origin' into develRussell King
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-27Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2Ingo Molnar
Conflicts: arch/parisc/kernel/irq.c arch/x86/include/asm/fixmap_64.h arch/x86/include/asm/setup.h kernel/irq/handle.c Semantic merge: arch/x86/include/asm/fixmap.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slob: fix lockup in slob_free() slub: use get_track() slub: rename calculate_min_partial() to set_min_partial() slub: add min_partial sysfs tunable slub: move min_partial to struct kmem_cache SLUB: Fix default slab order for big object sizes SLUB: Do not pass 8k objects through to the page allocator SLUB: Introduce and use SLUB_MAX_SIZE and SLUB_PAGE_SHIFT constants slob: clean up the code SLUB: Use ->objsize from struct kmem_cache_cpu in slab_free()
2009-03-26Merge branch 'for-2.6.30' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.30' of git://git.kernel.dk/linux-2.6-block: Get rid of pdflush_operation() in emergency sync and remount btrfs: get rid of current_is_pdflush() in btrfs_btree_balance_dirty Move the default_backing_dev_info out of readahead.c and into backing-dev.c block: Repeated lines in switching-sched.txt bsg: Remove bogus check against request_queue->max_sectors block: WARN in __blk_put_request() for potential bio leak loop: fix circular locking in loop_clr_fd() loop: support barrier writes bsg: add support for tail queuing cpqarray: enable bus mastering block: genhd.h cleanup patch block: add private bio_set for bio integrity allocations block: genhd.h comment needs updating block: get rid of unused blkdev_free_rq() define block: remove various blk_queue_*() setting functions in blk_init_queue_node() cciss: add BUILD_BUG_ON() for catching bad CommandList_struct alignment block: don't create bio_vec slabs of less than the inline number block: cleanup bio_alloc_bioset()
2009-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (71 commits) SELinux: inode_doinit_with_dentry drop no dentry printk SELinux: new permission between tty audit and audit socket SELinux: open perm for sock files smack: fixes for unlabeled host support keys: make procfiles per-user-namespace keys: skip keys from another user namespace keys: consider user namespace in key_permission keys: distinguish per-uid keys in different namespaces integrity: ima iint radix_tree_lookup locking fix TOMOYO: Do not call tomoyo_realpath_init unless registered. integrity: ima scatterlist bug fix smack: fix lots of kernel-doc notation TOMOYO: Don't create securityfs entries unless registered. TOMOYO: Fix exception policy read failure. SELinux: convert the avc cache hash list to an hlist SELinux: code readability with avc_cache SELinux: remove unused av.decided field SELinux: more careful use of avd in avc_has_perm_noaudit SELinux: remove the unused ae.used SELinux: check seqno when updating an avc_node ...
2009-03-26writeback: double the dirty thresholdsWu Fengguang
Enlarge default dirty ratios from 5/10 to 10/20. This fixes [Bug #12809] iozone regression with 2.6.29-rc6. The iozone benchmarks are performed on a 1200M file, with 8GB ram. iozone -i 0 -i 1 -i 2 -i 3 -i 4 -r 4k -s 64k -s 512m -s 1200m -b tmp.xls iozone -B -r 4k -s 64k -s 512m -s 1200m -b tmp.xls The performance regression is triggered by commit 1cf6e7d83bf3(mm: task dirty accounting fix), which makes more correct/thorough dirty accounting. The default 5/10 dirty ratios were picked (a) with the old dirty logic and (b) largely at random and (c) designed to be aggressive. In particular, that (a) means that having fixed some of the dirty accounting, maybe the real bug is now that it was always too aggressive, just hidden by an accounting issue. The enlarged 10/20 dirty ratios are just about enough to fix the regression. [ We will have to look at how this affects the old fsync() latency issue, but that probably will need independent work. - Linus ] Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: "Lin, Ming M" <ming.m.lin@intel.com> Tested-by: "Lin, Ming M" <ming.m.lin@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-26Move the default_backing_dev_info out of readahead.c and into backing-dev.cJens Axboe
It really makes no sense to have it in readahead.c, so move it where it belongs. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-25Merge branch 'for-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2009-03-24Merge branches 'topic/slob/cleanups', 'topic/slob/fixes', 'topic/slub/core', ↵Pekka Enberg
'topic/slub/cleanups' and 'topic/slub/perf' into for-linus
2009-03-24Merge branch 'master' into nextJames Morris
2009-03-23slob: fix lockup in slob_free()Nick Piggin
Don't hold SLOB lock when freeing the page. Reduces lock hold width. See the following thread for discussion of the bug: http://marc.info/?l=linux-kernel&m=123709983214143&w=2 Reported-by: Ingo Molnar <mingo@elte.hu> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-03-23slub: use get_track()Akinobu Mita
Use get_track() in set_track() Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-03-18Merge branches 'x86/cleanups', 'x86/cpu', 'x86/debug', 'x86/mce2', 'x86/mm', ↵Ingo Molnar
'x86/mtrr', 'x86/setup', 'x86/setup-memory', 'x86/urgent', 'x86/uv', 'x86/x2apic' and 'linus' into x86/core Conflicts: arch/parisc/kernel/irq.c
2009-03-15highmem: atomic highmem kmap page pinningNicolas Pitre
Most ARM machines have a non IO coherent cache, meaning that the dma_map_*() set of functions must clean and/or invalidate the affected memory manually before DMA occurs. And because the majority of those machines have a VIVT cache, the cache maintenance operations must be performed using virtual addresses. When a highmem page is kunmap'd, its mapping (and cache) remains in place in case it is kmap'd again. However if dma_map_page() is then called with such a page, some cache maintenance on the remaining mapping must be performed. In that case, page_address(page) is non null and we can use that to synchronize the cache. It is unlikely but still possible for kmap() to race and recycle the virtual address obtained above, and use it for another page before some on-going cache invalidation loop in dma_map_page() is done. In that case, the new mapping could end up with dirty cache lines for another page, and the unsuspecting cache invalidation loop in dma_map_page() might simply discard those dirty cache lines resulting in data loss. For example, let's consider this sequence of events: - dma_map_page(..., DMA_FROM_DEVICE) is called on a highmem page. --> - vaddr = page_address(page) is non null. In this case it is likely that the page has valid cache lines associated with vaddr. Remember that the cache is VIVT. --> for (i = vaddr; i < vaddr + PAGE_SIZE; i += 32) invalidate_cache_line(i); *** preemption occurs in the middle of the loop above *** - kmap_high() is called for a different page. --> - last_pkmap_nr wraps to zero and flush_all_zero_pkmaps() is called. The pkmap_count value for the page passed to dma_map_page() above happens to be 1, so the page is unmapped. But prior to that, flush_cache_kmaps() cleared the cache for it. So far so good. - A fresh pkmap entry is assigned for this kmap request. The Murphy law says this pkmap entry will eventually happen to use the same vaddr as the one which used to belong to the other page being processed by dma_map_page() in the preempted thread above. - The kmap_high() caller start dirtying the cache using the just assigned virtual mapping for its page. *** the first thread is rescheduled *** - The for(...) loop is resumed, but now cached data belonging to a different physical page is being discarded ! And this is not only a preemption issue as ARM can be SMP as well, making the above scenario just as likely. Hence the need for some kind of pkmap page pinning which can be used in any context, primarily for the benefit of dma_map_page() on ARM. This provides the necessary interface to cope with the above issue if ARCH_NEEDS_KMAP_HIGH_GET is defined, otherwise the resulting code is unchanged. Signed-off-by: Nicolas Pitre <nico@marvell.com> Reviewed-by: MinChan Kim <minchan.kim@gmail.com> Acked-by: Andrew Morton <akpm@linux-foundation.org>
2009-03-14vmscan: pgmoved should be cleared after updating recent_rotatedDaisuke Nishimura
pgmoved should be cleared after updating recent_rotated. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Rik van Riel <riel@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-14Merge branches 'x86/apic', 'x86/asm', 'x86/cleanups', 'x86/debug', ↵Ingo Molnar
'x86/kconfig', 'x86/mm', 'x86/ptrace', 'x86/setup' and 'x86/urgent'; commit 'v2.6.29-rc8' into x86/core
2009-03-14VM, x86, PAT: add a new vm flag to track full pfnmap at mmapPallipadi, Venkatesh
Impact: cleanup Add a new vm flag VM_PFN_AT_MMAP to identify a PFNMAP that is fully mapped with remap_pfn_range. Patch removes the overloading of VM_INSERTPAGE from the earlier patch. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Nick Piggin <npiggin@suse.de> LKML-Reference: <20090313233543.GA19909@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13Merge branch 'x86/core' into x86/kconfigIngo Molnar
2009-03-13VM, x86, PAT: Change is_linear_pfn_mapping to not use vm_pgoffPallipadi, Venkatesh
Impact: fix false positive PAT warnings - also fix VirtalBox hang Use of vma->vm_pgoff to identify the pfnmaps that are fully mapped at mmap time is broken. vm_pgoff is set by generic mmap code even for cases where drivers are setting up the mappings at the fault time. The problem was originally reported here: http://marc.info/?l=linux-kernel&m=123383810628583&w=2 Change is_linear_pfn_mapping logic to overload VM_INSERTPAGE flag along with VM_PFNMAP to mean full PFNMAP setup at mmap time. Problem also tracked at: http://bugzilla.kernel.org/show_bug.cgi?id=12800 Reported-by: Thomas Hellstrom <thellstrom@vmware.com> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha>@intel.com> Cc: Nick Piggin <npiggin@suse.de> Cc: "ebiederm@xmission.com" <ebiederm@xmission.com> Cc: <stable@kernel.org> # only for 2.6.29.1, not .28 LKML-Reference: <20090313004527.GA7176@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12memcg: use correct scan number at reclaimKOSAKI Motohiro
Even when page reclaim is under mem_cgroup, # of scan page is determined by status of global LRU. Fix that. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-11percpu: fix spurious alignment WARN in legacy SMP percpu allocatorTejun Heo
Impact: remove spurious WARN on legacy SMP percpu allocator Commit f2a8205c4ef1af917d175c36a4097ae5587791c8 incorrectly added too tight WARN_ON_ONCE() on alignments for UP and legacy SMP percpu allocator. Commit e317603694bfd17b28a40de9d65e1a4ec12f816e fixed it for UP but legacy SMP allocator was forgotten. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Sachin P. Sant <sachinp@in.ibm.com>
2009-03-10percpu: generalize embedding first chunk setup helperTejun Heo
Impact: code reorganization Separate out embedding first chunk setup helper from x86 embedding first chunk allocator and put it in mm/percpu.c. This will be used by the default percpu first chunk allocator and possibly by other archs. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-10percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk()Tejun Heo
Impact: cleanup, more flexibility for first chunk init Non-negative @dyn_size used to be allowed iff @unit_size wasn't auto. This restriction stemmed from implementation detail and made things a bit less intuitive. This patch allows @dyn_size to be specified regardless of @unit_size and swaps the positions of @dyn_size and @unit_size so that the parameter order makes more sense (static, reserved and dyn sizes followed by enclosing unit_size). While at it, add @unit_size >= PCPU_MIN_UNIT_SIZE sanity check. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-10percpu: make x86 addr <-> pcpu ptr conversion macros genericTejun Heo
Impact: generic addr <-> pcpu ptr conversion macros There's nothing arch specific about x86 __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr(). With proper __per_cpu_load and __per_cpu_start defined, they'll do the right thing regardless of actual layout. Move these macros from arch/x86/include/asm/percpu.h to mm/percpu.c and allow archs to override it as necessary. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-07percpu: finer grained locking to break deadlock and allow atomic freeTejun Heo
Impact: fix deadlock and allow atomic free Percpu allocation always uses GFP_KERNEL and whole alloc/free paths were protected by single mutex. All percpu allocations have been from GFP_KERNEL-safe context and the original allocator had this assumption too. However, by protecting both alloc and free paths with the same mutex, the new allocator creates free -> alloc -> GFP_KERNEL dependency which the original allocator didn't have. This can lead to deadlock if free is called from FS or IO paths. Also, in general, allocators are expected to allow free to be called from atomic context. This patch implements finer grained locking to break the deadlock and allow atomic free. For details, please read the "Synchronization rules" comment. While at it, also add CONTEXT: to function comments to describe which context they expect to be called from and what they do to it. This problem was reported by Thomas Gleixner and Peter Zijlstra. http://thread.gmane.org/gmane.linux.kernel/802384 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Peter Zijlstra <peterz@infradead.org>
2009-03-07percpu: move fully free chunk reclamation into a workTejun Heo
Impact: code reorganization for later changes Do fully free chunk reclamation using a work. This change is to prepare for locking changes. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-07percpu: move chunk area map extension out of area allocationTejun Heo
Impact: code reorganization for later changes Separate out chunk area map extension into a separate function - pcpu_extend_area_map() - and call it directly from pcpu_alloc() such that pcpu_alloc_area() is guaranteed to have enough area map slots on invocation. With this change, pcpu_alloc_area() does only area allocation and the only failure mode is when the chunk doens't have enough room, so there's no need to distinguish it from memory allocation failures. Make it return -1 on such cases instead of hacky -ENOSPC. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-07percpu: replace pcpu_realloc() with pcpu_mem_alloc() and pcpu_mem_free()Tejun Heo
Impact: code reorganization for later changes With static map handling moved to pcpu_split_block(), pcpu_realloc() only clutters the code and it's also unsuitable for scheduled locking changes. Implement and use pcpu_mem_alloc/free() instead. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-06percpu, module: implement reserved allocation and use it for module percpu ↵Tejun Heo
variables Impact: add reserved allocation functionality and use it for module percpu variables This patch implements reserved allocation from the first chunk. When setting up the first chunk, arch can ask to set aside certain number of bytes right after the core static area which is available only through a separate reserved allocator. This will be used primarily for module static percpu variables on architectures with limited relocation range to ensure that the module perpcu symbols are inside the relocatable range. If reserved area is requested, the first chunk becomes reserved and isn't available for regular allocation. If the first chunk also includes piggy-back dynamic allocation area, a separate chunk mapping the same region is created to serve dynamic allocation. The first one is called static first chunk and the second dynamic first chunk. Although they share the page map, their different area map initializations guarantee they serve disjoint areas according to their purposes. If arch doesn't setup reserved area, reserved allocation is handled like any other allocation. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-06percpu: add an indirection ptr for chunk page map accessTejun Heo
Impact: allow sharing page map, no functional difference yet Make chunk->page access indirect by adding a pointer and renaming the actual array to page_ar. This will be used by future changes. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-06percpu: use negative for auto for pcpu_setup_first_chunk() argumentsTejun Heo
Impact: argument semantic cleanup In pcpu_setup_first_chunk(), zero @unit_size and @dyn_size meant auto-sizing. It's okay for @unit_size as 0 doesn't make sense but 0 dynamic reserve size is valid. Alos, if arch @dyn_size is calculated from other parameters, it might end up passing in 0 @dyn_size and malfunction when the size is automatically adjusted. This patch makes both @unit_size and @dyn_size ssize_t and use -1 for auto sizing. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-06percpu: improve first chunk initial area map handlingTejun Heo
Impact: no functional change When the first chunk is created, its initial area map is not allocated because kmalloc isn't online yet. The map is allocated and initialized on the first allocation request on the chunk. This works fine but the scattering of initialization logic between the init function and allocation path is a bit confusing. This patch makes the first chunk initialize and use minimal statically allocated map from pcpu_setpu_first_chunk(). The map resizing path still needs to handle this specially but it's more straight-forward and gives more latitude to the init path. This will ease future changes. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-06percpu: cosmetic renames in pcpu_setup_first_chunk()Tejun Heo
Impact: cosmetic, preparation for future changes Make the following renames in pcpur_setup_first_chunk() in preparation for future changes. * s/free_size/dyn_size/ * s/static_vm/first_vm/ * s/static_chunk/schunk/ Signed-off-by: Tejun Heo <tj@kernel.org>
2009-03-04Merge branch 'x86/core' into core/percpuIngo Molnar
2009-03-04Merge branches 'x86/apic', 'x86/cpu', 'x86/fixmap', 'x86/mm', 'x86/sched', ↵Ingo Molnar
'x86/setup-lzma', 'x86/signal' and 'x86/urgent' into x86/core
2009-03-02x86, mm: dont use non-temporal stores in pagecache accessesIngo Molnar
Impact: standardize IO on cached ops On modern CPUs it is almost always a bad idea to use non-temporal stores, as the regression in this commit has shown it: 30d697f: x86: fix performance regression in write() syscall The kernel simply has no good information about whether using non-temporal stores is a good idea or not - and trying to add heuristics only increases complexity and inserts fragility. The regression on cached write()s took very long to be found - over two years. So dont take any chances and let the hardware decide how it makes use of its caches. The only exception is drivers/gpu/drm/i915/i915_gem.c: there were we are absolutely sure that another entity (the GPU) will pick up the dirty data immediately and that the CPU will not touch that data before the GPU will. Also, keep the _nocache() primitives to make it easier for people to experiment with these details. There may be more clear-cut cases where non-cached copies can be used, outside of filemap.c. Cc: Salman Qazi <sqazi@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-01Merge branch 'x86/urgent' into x86/patIngo Molnar
2009-03-01bootmem, x86: further fixes for arch-specific bootmem wrappingTejun Heo
Impact: fix new breakages introduced by previous fix Commit c132937556f56ee4b831ef4b23f1846e05fde102 tried to clean up bootmem arch wrapper but it wasn't quite correct. Before the commit, the followings were broken. * Low level interface functions prefixed with __ ignored arch preference. * reserve_bootmem(...) can't be mapped into reserve_bootmem_node(NODE_DATA(0)->bdata, ...) because the node is not preference here. The region specified MUST fall into the specified region; otherwise, it will panic. After the commit, * If allocation fails for the arch preferred node, it should fallback to whatever is available. Instead, it simply failed allocation. There are too many internal details to allow generic wrapping and still keep things simple for archs. Plus, all that arch wants is a way to prefer certain node over another. This patch drops the generic wrapping around alloc_bootmem_core() and add alloc_bootmem_core() instead. If necessary, arch can define bootmem_arch_referred_node() macro or function which takes all allocation information and returns the preferred node. bootmem generic code will always try the preferred node first and then fallback to other nodes as usual. Breakages noted and changes reviewed by Johannes Weiner. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
2009-03-01percpu: kill compile warning in pcpu_populate_chunk()Tejun Heo
Impact: remove compile warning Mark local variable map_end in pcpu_populate_chunk() with uninitialized_var(). The variable is always used in tandem with map_start and guaranteed to be initialized before use but gcc doesn't understand that. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Ingo Molnar <mingo@elte.hu>
2009-02-27mm: fix lazy vmap purging (use-after-free error)Vegard Nossum
I just got this new warning from kmemcheck: WARNING: kmemcheck: Caught 32-bit read from freed memory (c7806a60) a06a80c7ecde70c1a04080c700000000a06709c1000000000000000000000000 f f f f f f f f f f f f f f f f f f f f f f f f f f f f f f f f ^ Pid: 0, comm: swapper Not tainted (2.6.29-rc4 #230) EIP: 0060:[<c1096df7>] EFLAGS: 00000286 CPU: 0 EIP is at __purge_vmap_area_lazy+0x117/0x140 EAX: 00070f43 EBX: c7806a40 ECX: c1677080 EDX: 00027b66 ESI: 00002001 EDI: c170df0c EBP: c170df00 ESP: c178830c DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 80050033 CR2: c7806b14 CR3: 01775000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: 00004000 DR7: 00000000 [<c1096f3e>] free_unmap_vmap_area_noflush+0x6e/0x70 [<c1096f6a>] remove_vm_area+0x2a/0x70 [<c1097025>] __vunmap+0x45/0xe0 [<c10970de>] vunmap+0x1e/0x30 [<c1008ba5>] text_poke+0x95/0x150 [<c1008ca9>] alternatives_smp_unlock+0x49/0x60 [<c171ef47>] alternative_instructions+0x11b/0x124 [<c171f991>] check_bugs+0xbd/0xdc [<c17148c5>] start_kernel+0x2ed/0x360 [<c171409e>] __init_begin+0x9e/0xa9 [<ffffffff>] 0xffffffff It happened here: $ addr2line -e vmlinux -i c1096df7 mm/vmalloc.c:540 Code: list_for_each_entry(va, &valist, purge_list) __free_vmap_area(va); It's this instruction: mov 0x20(%ebx),%edx Which corresponds to a dereference of va->purge_list.next: (gdb) p ((struct vmap_area *) 0)->purge_list.next Cannot access memory at address 0x20 It seems that we should use "safe" list traversal here, as the element is freed inside the loop. Please verify that this is the right fix. Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-27mm: vmap fix overflowNick Piggin
The new vmap allocator can wrap the address and get confused in the case of large allocations or VMALLOC_END near the end of address space. Problem reported by Christoph Hellwig on a 32-bit XFS workload. Signed-off-by: Nick Piggin <npiggin@suse.de> Reported-by: Christoph Hellwig <hch@lst.de> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-26Merge branches 'x86/apic', 'x86/defconfig', 'x86/memtest', 'x86/mm' and ↵Ingo Molnar
'linus' into x86/core
2009-02-25shmem: fix shared anonymous accountingHugh Dickins
Each time I exit Firefox, /proc/meminfo's Committed_AS goes down almost 400 kB: OVERCOMMIT_NEVER would be allowing overcommits it should prohibit. Commit fc8744adc870a8d4366908221508bb113d8b72ee "Stop playing silly games with the VM_ACCOUNT flag" changed shmem_file_setup() to set the shmem file's VM_ACCOUNT flag according to VM_NORESERVE not being set in the vma flags; but did so only _after_ the shmem_acct_size(flags, size) call which is expected to pre-account a shared anonymous object. It's all clearer if we switch shmem.c over to use VM_NORESERVE throughout in place of !VM_ACCOUNT. But I very nearly sent in a patch which mistakenly removed the accounting from tmpfs files: shmem_get_inode()'s memset was good for not setting VM_ACCOUNT, but now it needs to set VM_NORESERVE. Rather than setting that by default, then perhaps clearing it again in shmem_file_setup(), let's pass it as a flag to shmem_get_inode(): that allows us to remove the #ifdef CONFIG_SHMEM from shmem_file_setup(). Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-25x86: make vmap yell louder when it is used under irqs_disabled()Peter Zijlstra
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25x86, mm: pass in 'total' to __copy_from_user_*nocache()Ingo Molnar
Impact: cleanup, enable future change Add a 'total bytes copied' parameter to __copy_from_user_*nocache(), and update all the callsites. The parameter is not used yet - architecture code can use it to more intelligently decide whether the copy should be cached or non-temporal. Cc: Salman Qazi <sqazi@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25slub: rename calculate_min_partial() to set_min_partial()David Rientjes
As suggested by Christoph Lameter, rename calculate_min_partial() to set_min_partial() as the function doesn't really do any calculations. Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-02-24Merge branch 'tj-percpu' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into core/percpu Conflicts: arch/x86/include/asm/pgtable.h