aboutsummaryrefslogtreecommitdiff
path: root/mm
AgeCommit message (Collapse)Author
2006-06-23[PATCH] zone handle unaligned zone boundariesAndy Whitcroft
The buddy allocator has a requirement that boundaries between contigious zones occur aligned with the the MAX_ORDER ranges. Where they do not we will incorrectly merge pages cross zone boundaries. This can lead to pages from the wrong zone being handed out. Originally the buddy allocator would check that buddies were in the same zone by referencing the zone start and end page frame numbers. This was removed as it became very expensive and the buddy allocator already made the assumption that zones boundaries were aligned. It is clear that not all configurations and architectures are honouring this alignment requirement. Therefore it seems safest to reintroduce support for non-aligned zone boundaries. This patch introduces a new check when considering a page a buddy it compares the zone_table index for the two pages and refuses to merge the pages where they do not match. The zone_table index is unique for each node/zone combination when FLATMEM/DISCONTIGMEM is enabled and for each section/zone combination when SPARSEMEM is enabled (a SPARSEMEM section is at least a MAX_ORDER size). Signed-off-by: Andy Whitcroft <apw@shadowen.org> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] VFS: Permit filesystem to perform statfs with a known root dentryDavid Howells
Give the statfs superblock operation a dentry pointer rather than a superblock pointer. This complements the get_sb() patch. That reduced the significance of sb->s_root, allowing NFS to place a fake root there. However, NFS does require a dentry to use as a target for the statfs operation. This permits the root in the vfsmount to be used instead. linux/mount.h has been added where necessary to make allyesconfig build successfully. Interest has also been expressed for use with the FUSE and XFS filesystems. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] VFS: Permit filesystem to override root dentry on mountDavid Howells
Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-12[PATCH] tmpfs: Decrement i_nlink correctly in shmem_rmdir()Sergey Vlasov
shmem_rmdir() must undo the increment of i_nlink done in shmem_get_inode() for directories, otherwise at least IN_DELETE_SELF inotify event generation is broken. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-12[PATCH] tmpfs: time granularity fix for [acm]time going backwardsRobin H. Johnson
I noticed a strange behavior in a tmpfs file system the other day, while building packages - occasionally, and seemingly at random, make decided to rebuild a target. However, only on tmpfs. A file would be created, and if checked, it had a sub-second timestamp. However, after an utimes related call where sub-seconds should be set, they were zeroed instead. In the case that a file was created, and utimes(...,NULL) was used on it in the same second, the timestamp on the file moved backwards. After some digging, I found that this was being caused by tmpfs not having a time granularity set, thus inheriting the default 1 second granularity. Hugh adds: yes, we missed tmpfs when the s_time_gran mods went into 2.6.11. Unfortunately, the granularity of CURRENT_TIME, often used in filesystems, does not match the default granularity set by alloc_super. A few more such discrepancies have been found, but this is the most important to fix now. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-11[PATCH] typo in vmscan.cChristoph Lameter
From: Christoph Lameter <clameter@sgi.com> Looks like a comma was left from the conversion from a struct to an assignment. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-02[PATCH] slab.c: fix offslab_limit bugIngo Molnar
mm/slab.c's offlab_limit logic is totally broken. Firstly, "offslab_limit" is a global variable while it should either be calculated in situ or should be passed in as a parameter. Secondly, the more serious problem with it is that the condition for calculating it: if (!(OFF_SLAB(sizes->cs_cachep))) { offslab_limit = sizes->cs_size - sizeof(struct slab); offslab_limit /= sizeof(kmem_bufctl_t); is in total disconnect with the condition that makes use of it: /* More than offslab_limit objects will cause problems */ if ((flags & CFLGS_OFF_SLAB) && num > offslab_limit) break; but due to offslab_limit being a global variable this breakage was hidden. Up until lockdep came along and perturbed the slab sizes sufficiently so that the first off-slab cache would still see a (non-calculated) zero value for offslab_limit and would panic with: kmem_cache_create: couldn't create cache size-512. Call Trace: [<ffffffff8020a5b9>] show_trace+0x96/0x1c8 [<ffffffff8020a8f0>] dump_stack+0x13/0x15 [<ffffffff8022994f>] panic+0x39/0x21a [<ffffffff80270814>] kmem_cache_create+0x5a0/0x5d0 [<ffffffff80aced62>] kmem_cache_init+0x193/0x379 [<ffffffff80abf779>] start_kernel+0x17f/0x218 [<ffffffff80abf263>] _sinittext+0x263/0x26a Kernel panic - not syncing: kmem_cache_create(): failed to create slab `size-512' Paolo Ornati's config on x86_64 managed to trigger it. The fix is to move the calculation to the place that makes use of it. This also makes slab.o 54 bytes smaller. Btw., the check itself is quite silly. Its intention is to test whether the number of objects per slab would be higher than the number of slab control pointers possible. In theory it could be triggered: if someone tried to allocate 4-byte objects cache and explicitly requested with CFLGS_OFF_SLAB. So i kept the check. Out of historic interest i checked how old this bug was and it's ancient, 10 years old! It is the oldest hidden and then truly triggering bugs i ever saw being fixed in the kernel! Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-31[PATCH] spanned_pages is not updated at a case of memory hot-addYasunori Goto
From: Yasunori Goto <y-goto@jp.fujitsu.com> If hot-added memory's address is smaller than old area, spanned_pages will not be updated. It must be fixed. example) Old zone_start_pfn = 0x60000, and spanned_pages = 0x10000 Added new memory's start_pfn = 0x50000, and end_pfn = 0x60000 new spanned_pages will be still 0x10000 by old code. (It should be updated to 0x20000.) Because old_zone_end_pfn will be 0x70000, and end_pfn smaller than it. So, spanned_pages will not be updated. In current code, spanned_pages is updated only when end_pfn is updated. But, it should be updated by subtraction between bigger end_pfn and new zone_start_pfn. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] Align the node_mem_map endpoints to a MAX_ORDER boundaryBob Picco
Andy added code to buddy allocator which does not require the zone's endpoints to be aligned to MAX_ORDER. An issue is that the buddy allocator requires the node_mem_map's endpoints to be MAX_ORDER aligned. Otherwise __page_find_buddy could compute a buddy not in node_mem_map for partial MAX_ORDER regions at zone's endpoints. page_is_buddy will detect that these pages at endpoints are not PG_buddy (they were zeroed out by bootmem allocator and not part of zone). Of course the negative here is we could waste a little memory but the positive is eliminating all the old checks for zone boundary conditions. SPARSEMEM won't encounter this issue because of MAX_ORDER size constraint when SPARSEMEM is configured. ia64 VIRTUAL_MEM_MAP doesn't need the logic either because the holes and endpoints are handled differently. This leaves checking alloc_remap and other arches which privately allocate for node_mem_map. Signed-off-by: Bob Picco <bob.picco@hp.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] Cpuset: might sleep checking zones allowed fixPaul Jackson
Fix a couple of infrequently encountered 'sleeping function called from invalid context' in the cpuset hooks in __alloc_pages. Could sleep while interrupts disabled. The routine cpuset_zone_allowed() is called by code in mm/page_alloc.c __alloc_pages() to determine if a zone is allowed in the current tasks cpuset. This routine can sleep, for certain GFP_KERNEL allocations, if the zone is on a memory node not allowed in the current cpuset, but might be allowed in a parent cpuset. But we can't sleep in __alloc_pages() if in interrupt, nor if called for a GFP_ATOMIC request (__GFP_WAIT not set in gfp_flags). The rule was intended to be: Don't call cpuset_zone_allowed() if you can't sleep, unless you pass in the __GFP_HARDWALL flag set in gfp_flag, which disables the code that might scan up ancestor cpusets and sleep. This rule was being violated in a couple of places, due to a bogus change made (by myself, pj) to __alloc_pages() as part of the November 2005 effort to cleanup its logic, and also due to a later fix to constrain which swap daemons were awoken. The bogus change can be seen at: http://linux.derkeiler.com/Mailing-Lists/Kernel/2005-11/4691.html [PATCH 01/05] mm fix __alloc_pages cpuset ALLOC_* flags This was first noticed on a tight memory system, in code that was disabling interrupts and doing allocation requests with __GFP_WAIT not set, which resulted in __might_sleep() writing complaints to the log "Debug: sleeping function called ...", when the code in cpuset_zone_allowed() tried to take the callback_sem cpuset semaphore. We haven't seen a system hang on this 'might_sleep' yet, but we are at decent risk of seeing it fairly soon, especially since the additional cpuset_zone_allowed() check was added, conditioning wakeup_kswapd(), in March 2006. Special thanks to Dave Chinner, for figuring this out, and a tip of the hat to Nick Piggin who warned me of this back in Nov 2005, before I was ready to listen. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21[PATCH] SPARSEMEM incorrectly calculates section numberMike Kravetz
A bad calculation/loop in __section_nr() could result in incorrect section information being put into sysfs memory entries. This primarily impacts memory add operations as the sysfs information is used while onlining new memory. Fix suggested by Dave Hansen. Note that the bug may not be obvious from the patch. It actually occurs in the function's return statement: return (root_nr * SECTIONS_PER_ROOT) + (ms - root); In the existing code, root_nr has already been multiplied by SECTIONS_PER_ROOT. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-16[PATCH] slab: Fix kmem_cache_destroy() on NUMARoland Dreier
With CONFIG_NUMA set, kmem_cache_destroy() may fail and say "Can't free all objects." The problem is caused by sequences such as the following (suppose we are on a NUMA machine with two nodes, 0 and 1): * Allocate an object from cache on node 0. * Free the object on node 1. The object is put into node 1's alien array_cache for node 0. * Call kmem_cache_destroy(), which ultimately ends up in __cache_shrink(). * __cache_shrink() does drain_cpu_caches(), which loops through all nodes. For each node it drains the shared array_cache and then handles the alien array_cache for the other node. However this means that node 0's shared array_cache will be drained, and then node 1 will move the contents of its alien[0] array_cache into that same shared array_cache. node 0's shared array_cache is never looked at again, so the objects left there will appear to be in use when __cache_shrink() calls __node_shrink() for node 0. So __node_shrink() will return 1 and kmem_cache_destroy() will fail. This patch fixes this by having drain_cpu_caches() do drain_alien_cache() on every node before it does drain_array() on the nodes' shared array_caches. The problem was originally reported by Or Gerlitz <ogerlitz@voltaire.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Christoph Lameter <clameter@sgi.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15[PATCH] add slab_is_available() routine for boot codeMike Kravetz
slab_is_available() indicates slab based allocators are available for use. SPARSEMEM code needs to know this as it can be called at various times during the boot process. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15[PATCH] setup_per_zone_pages_min() overflow fixAndrew Morton
As pointed out in http://bugzilla.kernel.org/show_bug.cgi?id=6490, this function can experience overflows on 32-bit machines, causing our response to changed values of min_free_kbytes to go whacky. Fixing it efficiently is all too hard, so fix it with 64-bit math instead. Cc: Ake Sandgren <ake.sandgren@hpc2n.umu.se> Cc: Martin Bligh <mbligh@google.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01[PATCH] spufs: fix for CONFIG_NUMAJoel H Schopp
Based on an older patch from Mike Kravetz <kravetz@us.ibm.com> We need to have a mem_map for high addresses in order to make fops->no_page work on spufs mem and register files. So far, we have used the memory_present() function during early bootup, but that did not work when CONFIG_NUMA was enabled. We now use the __add_pages() function to add the mem_map when loading the spufs module, which is a lot nicer. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01[PATCH] sparsemem interaction with memory add bug fixesMike Kravetz
This patch fixes two bugs with the way sparsemem interacts with memory add. They are: - memory leak if memmap for section already exists - calling alloc_bootmem_node() after boot These bugs were discovered and a first cut at the fixes were provided by Arnd Bergmann <arnd@arndb.de> and Joel Schopp <jschopp@us.ibm.com>. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-01[PATCH] page migration: Fix fallback behavior for dirty pagesChristoph Lameter
Currently we check PageDirty() in order to make the decision to swap out the page. However, the dirty information may be only be contained in the ptes pointing to the page. We need to first unmap the ptes before checking for PageDirty(). If unmap is successful then the page count of the page will also be decreased so that pageout() works properly. This is a fix necessary for 2.6.17. Without this fix we may migrate dirty pages for filesystems without migration functions. Filesystems may keep pointers to dirty pages. Migration of dirty pages can result in the filesystem keeping pointers to freed pages. Unmapping is currently not be separated out from removing all the references to a page and moving the mapping. Therefore try_to_unmap will be called again in migrate_page() if the writeout is successful. However, it wont do anything since the ptes are already removed. The coming updates to the page migration code will restructure the code so that this is no longer necessary. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] slab: fix crash on __drain_alien_cahce() during CPU Hotplugshin, jacob
transfer_objects should only be called when all of the cpus in the node are online. CPU_DEAD notifier callback marks l3->shared to NULL. Signed-off-by: Jacob Shin <jacob.shin@amd.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-27[PATCH] Add find_get_pages_contig(): contiguous variant of find_get_pages()Jens Axboe
find_get_pages_contig() will break out if we hit a hole in the page cache. From Andrew Morton, small modifications and documentation by me. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-04-26[PATCH] Remove __devinit and __cpuinit from notifier_call definitionsChandra Seetharaman
Few of the notifier_chain_register() callers use __init in the definition of notifier_call. It is incorrect as the function definition should be available after the initializations (they do not unregister them during initializations). This patch fixes all such usages to _not_ have the notifier_call __init section. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-22[PATCH] add migratepage address space op to shmemLee Schermerhorn
Basic problem: pages of a shared memory segment can only be migrated once. In 2.6.16 through 2.6.17-rc1, shared memory mappings do not have a migratepage address space op. Therefore, migrate_pages() falls back to default processing. In this path, it will try to pageout() dirty pages. Once a shared memory page has been migrated it becomes dirty, so migrate_pages() will try to page it out. However, because the page count is 3 [cache + current + pte], pageout() will return PAGE_KEEP because is_page_cache_freeable() returns false. This will abort all subsequent migrations. This patch adds a migratepage address space op to shared memory segments to avoid taking the default path. We use the "migrate_page()" function because it knows how to migrate dirty pages. This allows shared memory segment pages to migrate, subject to other conditions such as # pte's referencing the page [page_mapcount(page)], when requested. I think this is safe. If we're migrating a shared memory page, then we found the page via a page table, so it must be in memory. Can be verified with memtoy and the shmem-mbind-test script, both available at: http://free.linux.hp.com/~lts/Tools/ Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-20[PATCH] Remove cond_resched in gather_stats()Christoph Lameter
gather_stats() is called with a spinlock held from check_pte_range. We cannot reschedule with a lock held. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] page_alloc.c: buddy handling cleanupAndrew Morton
Fix up some whitespace damage. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] mm: fix mm_struct reference counting bugs in mm/oom_kill.cDave Peterson
Fix oom_kill_task() so it doesn't call mmput() (which may sleep) while holding tasklist_lock. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] oom-kill: mm locking fixAndrew Morton
Dave Peterson <dsp@llnl.gov> points out that badness() is playing with mm_structs without taking a reference on them. mmput() can sleep, so taking a reference here (inside tasklist_lock) is hard. Fix it up via task_lock() instead. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] mm/slob.c: for_each_possible_cpu(), not NR_CPUSJohn Hawkes
Convert for-loops that explicitly reference "NR_CPUS" into the potentially more efficient for_each_possible_cpu() construct. Signed-off-by: John Hawkes <hawkes@sgi.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-17[PATCH] Fix MADV_REMOVE protection checkingHugh Dickins
madvise_remove needs to respect file and mmap protections. Signed-off-by: Hugh Dickins <hugh@veritas.com> [ Will the real CVE-2006-1524 stand up, please.. ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] page-writeback comment fixesCoywolf Qi Hunt
Signed-off-by: Coywolf Qi Hunt <qiyong@fc-cn.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] mm/migrate.c: don't export a static functionAdrian Bunk
EXPORT_SYMBOL'ing of a static function is not a good idea. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] overcommit: use totalreserve_pages for nommuHideo AOKI
This patch is an enhancement of OVERCOMMIT_GUESS algorithm in __vm_enough_memory() in mm/nommu.c. When the OVERCOMMIT_GUESS algorithm calculates the number of free pages, the algorithm subtracts the number of reserved pages from the result nr_free_pages(). Signed-off-by: Hideo Aoki <haoki@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] overcommit: use totalreserve_pagesHideo AOKI
This patch is an enhancement of OVERCOMMIT_GUESS algorithm in __vm_enough_memory() in mm/mmap.c. When the OVERCOMMIT_GUESS algorithm calculates the number of free pages, the algorithm subtracts the number of reserved pages from the result nr_free_pages(). Signed-off-by: Hideo Aoki <haoki@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] overcommit: add calculate_totalreserve_pages()Hideo AOKI
These patches are an enhancement of OVERCOMMIT_GUESS algorithm in __vm_enough_memory(). - why the kernel needed patching When the kernel can't allocate anonymous pages in practice, currnet OVERCOMMIT_GUESS could return success. This implementation might be the cause of oom kill in memory pressure situation. If the Linux runs with page reservation features like /proc/sys/vm/lowmem_reserve_ratio and without swap region, I think the oom kill occurs easily. - the overall design approach in the patch When the OVERCOMMET_GUESS algorithm calculates number of free pages, the reserved free pages are regarded as non-free pages. This change helps to avoid the pitfall that the number of free pages become less than the number which the kernel tries to keep free. - testing results I tested the patches using my test kernel module. If the patches aren't applied to the kernel, __vm_enough_memory() returns success in the situation but autual page allocation is failed. On the other hand, if the patches are applied to the kernel, memory allocation failure is avoided since __vm_enough_memory() returns failure in the situation. I checked that on i386 SMP 16GB memory machine. I haven't tested on nommu environment currently. This patch adds totalreserve_pages for __vm_enough_memory(). Calculate_totalreserve_pages() checks maximum lowmem_reserve pages and pages_high in each zone. Finally, the function stores the sum of each zone to totalreserve_pages. The totalreserve_pages is calculated when the VM is initilized. And the variable is updated when /proc/sys/vm/lowmem_reserve_raito or /proc/sys/vm/min_free_kbytes are changed. Signed-off-by: Hideo Aoki <haoki@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] Some page migration fixupsChristoph Lameter
- Remove sparse comment - Remove duplicated include - Return the correct error condition in migrate_page_remove_references(). Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] mm: fix bug in brk()Ram Gupta
The code checks for newbrk with oldbrk which are page aligned before making a check for the memory limit set of data segment. If the memory limit is not page aligned in that case it bypasses the test for the limit if the memory allocation is still for the same page. Signed-off-by: Ram Gupta <ram.gupta5@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] nommu: use compound page in slab allocatorLuke Yang
The earlier patch to consolidate mmu and nommu page allocation and refcounting by using compound pages for nommu allocations had a bug: kmalloc slabs who's pages were initially allocated by a non-__GFP_COMP allocator could be passed into mm/nommu.c kmalloc allocations which really wanted __GFP_COMP underlying pages. Fix that by having nommu pass __GFP_COMP to all higher order slab allocations. Signed-off-by: Luke Yang <luke.adi@gmail.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] slab: add statistics for alien cache overflowsRavikiran G Thirumalai
Add a statistics counter which is incremented everytime the alien cache overflows. alien_cache limit is hardcoded to 12 right now. We can use this statistics to tune alien cache if needed in the future. Signed-off-by: Alok N Kataria <alokk@calsoftinc.com> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] slab: allocate node local memory for off-slab slabmanagementRavikiran G Thirumalai
Allocate off-slab slab descriptors from node local memory. Signed-off-by: Alok N Kataria <alokk@calsoftinc.com> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-10[PATCH] Fix buddy list race that could lead to page lru list corruptionsNick Piggin
Rohit found an obscure bug causing buddy list corruption. page_is_buddy is using a non-atomic test (PagePrivate && page_count == 0) to determine whether or not a free page's buddy is itself free and in the buddy lists. Each of the conjuncts may be true at different times due to unrelated conditions, so the non-atomic page_is_buddy test may find each conjunct to be true even if they were not both true at the same time (ie. the page was not on the buddy lists). Signed-off-by: Martin Bligh <mbligh@google.com> Signed-off-by: Rohit Seth <rohitseth@google.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09[PATCH] x86_64: Handle empty PXMs that only contain hotplug memoryAndi Kleen
The node setup code would try to allocate the node metadata in the node itself, but that fails if there is no memory in there. This can happen with memory hotplug when the hotplug area defines an so far empty node. Now use bootmem to try to allocate the mem_map in other nodes. And if it fails don't panic, but just ignore the node. To make this work I added a new __alloc_bootmem_nopanic function that does what its name implies. TBD should try to use nearby nodes here. Currently we just use any. It's hard to do it better because bootmem doesn't have proper fallback lists yet. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-02Documentation: fix minor kernel-doc warningsMartin Waitz
This patch updates the comments to match the actual code. Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-02BUG_ON() Conversion in mm/slab.cEric Sesterhenn
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-02BUG_ON() Conversion in mm/highmem.cEric Sesterhenn
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-01BUG_ON() Conversion in mm/vmalloc.cEric Sesterhenn
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-01BUG_ON() Conversion in mm/swap_state.cEric Sesterhenn
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-01BUG_ON() Conversion in mm/mmap.cEric Sesterhenn
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-31[PATCH] sys_sync_file_range()Andrew Morton
Remove the recently-added LINUX_FADV_ASYNC_WRITE and LINUX_FADV_WRITE_WAIT fadvise() additions, do it in a new sys_sync_file_range() syscall instead. Reasons: - It's more flexible. Things which would require two or three syscalls with fadvise() can be done in a single syscall. - Using fadvise() in this manner is something not covered by POSIX. The patch wires up the syscall for x86. The sycall is implemented in the new fs/sync.c. The intention is that we can move sys_fsync(), sys_fdatasync() and perhaps sys_sync() into there later. Documentation for the syscall is in fs/sync.c. A test app (sync_file_range.c) is in http://www.zip.com.au/~akpm/linux/patches/stuff/ext3-tools.tar.gz. The available-to-GPL-modules do_sync_file_range() is for knfsd: "A COMMIT can say NFS_DATA_SYNC or NFS_FILE_SYNC. I can skip the ->fsync call for NFS_DATA_SYNC which is hopefully the more common." Note: the `async' writeout mode SYNC_FILE_RANGE_WRITE will turn synchronous if the queue is congested. This is trivial to fix: add a new flag bit, set wbc->nonblocking. But I'm not sure that we want to expose implementation details down to that level. Note: it's notable that we can sync an fd which wasn't opened for writing. Same with fsync() and fdatasync()). Note: the code takes some care to handle attempts to sync file contents outside the 16TB offset on 32-bit machines. It makes such attempts appear to succeed, for best 32-bit/64-bit compatibility. Perhaps it should make such requests fail... Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31[PATCH] Don't pass boot parameters to argv_init[]OGAWA Hirofumi
The boot cmdline is parsed in parse_early_param() and parse_args(,unknown_bootoption). And __setup() is used in obsolete_checksetup(). start_kernel() -> parse_args() -> unknown_bootoption() -> obsolete_checksetup() If __setup()'s callback (->setup_func()) returns 1 in obsolete_checksetup(), obsolete_checksetup() thinks a parameter was handled. If ->setup_func() returns 0, obsolete_checksetup() tries other ->setup_func(). If all ->setup_func() that matched a parameter returns 0, a parameter is seted to argv_init[]. Then, when runing /sbin/init or init=app, argv_init[] is passed to the app. If the app doesn't ignore those arguments, it will warning and exit. This patch fixes a wrong usage of it, however fixes obvious one only. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31[PATCH] hugetlb: don't allow free hugetlb count fall below reserved countChen, Kenneth W
With strict page reservation, I think kernel should enforce number of free hugetlb page don't fall below reserved count. Currently it is possible in the sysctl path. Add proper check in sysctl to disallow that. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31[PATCH] fix extra page ref count in follow_hugetlb_pageChen, Kenneth W
git-commit: d5d4b0aa4e1430d73050babba999365593bdb9d2 "[PATCH] optimize follow_hugetlb_page" breaks mlock on hugepage areas. I mis-interpret pages argument and made get_page() unconditional. It should only get a ref count when "pages" argument is non-null. Credit goes to Adam Litke who spotted the bug. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31[PATCH] mm: schedule find_trylock_page() removalNick Piggin
find_trylock_page() is an odd interface in that it doesn't take a reference like the others. Now that XFS no longer uses it, and its last remaining caller actually wants an elevated refcount, opencode that callsite and schedule find_trylock_page() for removal. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>