aboutsummaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-02[BLUETOOTH] lockdep: annotate sk_lock nesting in AF_BLUETOOTHPeter Zijlstra
============================================= [ INFO: possible recursive locking detected ] 2.6.18-1.2726.fc6 #1
2006-12-02[BLUETOOTH] rfcomm endianness bug: param_mask is little-endian on the wireAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BLUETOOTH]: rfcomm endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BLUETOOTH]: bnep endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BLUETOOTH] bnep endianness bug: filtering by packet typeAl Viro
<= and => don't work well on net-endian... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-21[BLUETOOTH]: Fix unaligned access in hci_send_to_sock.David S. Miller
The "u16 *" derefs of skb->data need to be wrapped inside of a get_unaligned(). Thanks to Gustavo Zacarias for the bug report. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-21[Bluetooth] Ignore L2CAP config requests on disconnectMarcel Holtmann
Any L2CAP connection in disconnecting state shall not response to any further config requests from the remote side. So in case such a request is received, ignore it. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-21[Bluetooth] Always include MTU in L2CAP config responsesMarcel Holtmann
When sending a positive config response it shall include the actual MTU to be used on this channel. This differs from the Bluetooth 1.1 specification where it was enough to acknowledge the config request. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-21[Bluetooth] Check if RFCOMM session is still attached to the TTYMarcel Holtmann
If the RFCOMM session is no longer attached to the TTY device, then it makes no sense to go through with changing the termios settings. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-21[Bluetooth] Handling pending connect attempts after inquiryMarcel Holtmann
After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-21[Bluetooth] Attach low-level connections to the Bluetooth busMarcel Holtmann
To receive uvents for the low-level ACL and SCO links, they must be assigned to a subsystem. It is enough to attach them to the already established Bluetooth bus. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-20[Bluetooth] Fix HID disconnect NULL pointer dereferenceMarcel Holtmann
The latest HID disconnect sequence change introduced a NULL pointer dereference. For the quirk to handle buggy remote HID implementations, it is enough to wait for a potential control channel disconnect from the remote side and it is also enough to wait only 500 msecs. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15[Bluetooth] Add locking for bt_proto array manipulationMarcel Holtmann
The bt_proto array needs to be protected by some kind of locking to prevent a race condition between bt_sock_create and bt_sock_register. And in addition all calls to sk_alloc need to be made GFP_ATOMIC now. Signed-off-by: Masatake YAMATO <jet@gyve.org> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15[Bluetooth] Check if DLC is still attached to the TTYMarcel Holtmann
If the DLC device is no longer attached to the TTY device, then it makes no sense to go through with changing the termios settings. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15[Bluetooth] Fix reference count when connection lookup failsMarcel Holtmann
When the connection lookup for the device structure fails, the reference count for the HCI device needs to be decremented. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15[Bluetooth] Disconnect HID interrupt channel firstMarcel Holtmann
The Bluetooth HID specification demands that the interrupt channel shall be disconnected first. This is needed to pass the qualification tests. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15[Bluetooth] Support concurrent connect requestsMarcel Holtmann
Most Bluetooth chips don't support concurrent connect requests, because this would involve a multiple baseband page with only one radio. In the case an upper layer like L2CAP requests a concurrent connect these chips return the error "Command Disallowed" for the second request. If this happens it the responsibility of the Bluetooth core to queue the request and try again after the previous connect attempt has been completed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15[Bluetooth] Make use of virtual devices treeMarcel Holtmann
The Bluetooth subsystem currently uses a platform device for devices with no parent. It is a better idea to use the new virtual devices tree for these. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15[Bluetooth] Handle return values from driver core functionsMarcel Holtmann
Some return values of the driver core register and create functions are not handled and so might cause unexpected problems. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15[Bluetooth] Fix compat ioctl for BNEP, CMTP and HIDPMarcel Holtmann
There exists no attempt do deal with the fact that a structure with a uint32_t followed by a pointer is going to be different for 32-bit and 64-bit userspace. Any 32-bit process trying to use it will be failing with -EFAULT if it's lucky; suffering from having data dumped at a random address if it's not. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-02[PATCH] const struct tty_operationsJeff Dike
As part of an SMP cleanliness pass over UML, I consted a bunch of structures in order to not have to document their locking. One of these structures was a struct tty_operations. In order to const it in UML without introducing compiler complaints, the declaration of tty_set_operations needs to be changed, and then all of its callers need to be fixed. This patch declares all struct tty_operations in the tree as const. In all cases, they are static and used only as input to tty_set_operations. As an extra check, I ran an i386 allyesconfig build which produced no extra warnings. 53 drivers are affected. I checked the history of a bunch of them, and in most cases, there have been only a handful of maintenance changes in the last six months. serial_core.c was the busiest one that I looked at. Signed-off-by: Jeff Dike <jdike@addtoit.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-28[Bluetooth]: Fix section mismatch of bt_sysfs_cleanup()Arnaud Patard
The bt_sysfs_cleanup() is marked with __exit attribute, but it will be called from an __init function in the error case. So the __exit attribute must be removed. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[Bluetooth]: Don't update disconnect timer for incoming connectionsMarcel Holtmann
In the case of device pairing the only safe method is to establish a low-level ACL link. In this case, the remote side should not use the disconnect timer to give the other side the chance to enter the PIN code. If the disconnect timer is used, the connection will be dropped to soon, because it is impossible to identify an actual user of this link. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[Bluetooth] Support create connection cancel commandMarcel Holtmann
In case of non-blocking connects it is possible that the last user of an ACL link quits before the connection has been fully established. This will lead to a race condition where the internal state of a connection is closed, but the actual link has been established and is active. In case of Bluetooth 1.2 and later devices it is possible to call create connection cancel to abort the connect. For older devices the disconnect timer will be used to trigger the needed disconnect. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28[Bluetooth] Read local version information on device initMarcel Holtmann
The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28[Bluetooth] Return EINPROGRESS for non-blocking socket callsMarcel Holtmann
In case of non-blocking socket calls we should return EINPROGRESS and not EAGAIN. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28[Bluetooth] Handle command complete event for exit periodic inquiryMarcel Holtmann
The command complete event of the exit periodic inquiry command must clear the HCI_INQUIRY flag and finish the HCI request. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28[Bluetooth] Add HCI device identifier for SDIO cardsMarcel Holtmann
This patch assigns the next free HCI device identifier to Bluetooth devices based on the SDIO interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28[Bluetooth] Integrate services into the driver modelMarcel Holtmann
This patch integrates the services of the Bluetooth protocols RFCOMM, BNEP and HIDP into the driver model. This makes it possible to assign the virtual TTY, network and input devices to a specific Bluetooth connection. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28[Bluetooth] Integrate low-level connections into the driver modelMarcel Holtmann
This patch integrates the low-level connections (ACL and SCO) into the driver model. Every connection is presented as device with the parent set to its host controller device. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28[Bluetooth] Remove unused host controller attributesMarcel Holtmann
This patch removes the unused device attribute entries for the Bluetooth host controllers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-24[Bluetooth] Correct RFCOMM channel MTU for broken implementationsMarcel Holtmann
Some Bluetooth RFCOMM implementations try to negotiate a bigger channel MTU than we can support for a particular session. The maximum MTU for a RFCOMM session is limited through the L2CAP layer. So if the other side proposes a channel MTU that is bigger than the underlying L2CAP MTU, we should reduce it to the L2CAP MTU of the session minus five bytes for the RFCOMM headers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-12[Bluetooth] Fix deadlock in the L2CAP layerMarcel Holtmann
The Bluetooth L2CAP layer has 2 locks that are used in softirq context, (one spinlock and one rwlock, where the softirq usage is readlock) but where not all usages of the lock were _bh safe. The patch below corrects this. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-12[Bluetooth] Let BT_HIDP depend on INPUTMarcel Holtmann
This patch lets BT_HIDP depend on instead of select INPUT. This fixes the following warning during an s390 build: net/bluetooth/hidp/Kconfig:4:warning: 'select' used by config symbol 'BT_HIDP' refer to undefined symbol 'INPUT' A dependency on INPUT also implies !S390 (and therefore makes the explicit dependency obsolete) since INPUT is not available on s390. The practical difference should be nearly zero, since INPUT is always set to y unless EMBEDDED=y (or S390=y). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-12[Bluetooth] Remaining transitions to use kzalloc()Marcel Holtmann
This patch makes the remaining transitions to use kzalloc(). Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03[Bluetooth] Add RFCOMM role switch supportMarcel Holtmann
This patch adds the support for RFCOMM role switching before the connection is fully established. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03[Bluetooth] Allow disabling of credit based flow controlMarcel Holtmann
This patch adds the module parameter disable_cfc which can be used to disable the credit based flow control. The credit based flow control was introduced with the Bluetooth 1.1 specification and devices can negotiate its support, but for testing purpose it is helpful to allow disabling of it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03[Bluetooth] Small cleanup of the L2CAP source codeMarcel Holtmann
This patch is a small cleanup of the L2CAP source code. It makes some coding style changes and moves some functions around to avoid forward declarations. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03[Bluetooth] Use real devices for host controllersMarcel Holtmann
This patch converts the Bluetooth class devices into real devices. The Bluetooth class is kept and the driver core provides the appropriate symlinks for backward compatibility. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03[Bluetooth] Add platform device for virtual and serial devicesMarcel Holtmann
This patch adds a generic Bluetooth platform device that can be used as parent device by virtual and serial devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03[Bluetooth] Add automatic sniff mode supportMarcel Holtmann
This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03[Bluetooth] Correct SCO buffer size on requestMarcel Holtmann
This patch introduces a quirk that allows the drivers to tell the host to correct the SCO buffer size values. Signed-off-by: Olivier Galibert <galibert@pobox.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits) [PATCH] devfs: Remove it from the feature_removal.txt file [PATCH] devfs: Last little devfs cleanups throughout the kernel tree. [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree [PATCH] devfs: Remove devfs_remove() function from the kernel tree [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree [PATCH] devfs: Remove devfs support from the sound subsystem [PATCH] devfs: Remove devfs support from the ide subsystem. [PATCH] devfs: Remove devfs support from the serial subsystem [PATCH] devfs: Remove devfs from the init code [PATCH] devfs: Remove devfs from the partition code ...
2006-06-28[PATCH] remove TTY_DONT_FLIPPaul Fulghum
Remove TTY_DONT_FLIP tty flag. This flag was introduced in 2.1.X kernels to prevent the N_TTY line discipline functions read_chan() and n_tty_receive_buf() from running at the same time. 2.2.15 introduced tty->read_lock to protect access to the N_TTY read buffer, which is the only state requiring protection between these two functions. The current TTY_DONT_FLIP implementation is broken for SMP, and is not universally honored by drivers that send data directly to the line discipline receive_buf function. Because TTY_DONT_FLIP is not necessary, is broken in implementation, and is not universally honored, it is removed. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEVGreg Kroah-Hartman
I've always found this flag confusing. Now that devfs is no longer around, it has been renamed, and the documentation for when this flag should be used has been updated. Also fixes all drivers that use this flag. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer neededGreg Kroah-Hartman
Also fixes all drivers that set this field. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-09[BLUETOOTH] sco: Possible double free.Eric Sesterhenn
this fixes coverity bug id #1068. hci_send_sco() frees skb if (skb->len > hdev->sco_mtu). Since it returns a negative error value only in this case, we can directly return here. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>