aboutsummaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2008-03-03[BLUETOOTH]: l2cap info_timer delete fix in hci_conn_delDave Young
When the l2cap info_timer is active the info_state will be set to L2CAP_INFO_FEAT_MASK_REQ_SENT, and it will be unset after the timer is deleted or timeout triggered. Here in l2cap_conn_del only call del_timer_sync when the info_state is set to L2CAP_INFO_FEAT_MASK_REQ_SENT. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26bluetooth: delete timer in l2cap_conn_del()Thomas Gleixner
Delete a possibly armed timer before kfree'ing the connection object. Solves: http://lkml.org/lkml/2008/2/15/514 Reported-by:Quel Qun <kelk1@comcast.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (60 commits) [NIU]: Bump driver version and release date. [NIU]: Fix BMAC alternate MAC address indexing. net: fix kernel-doc warnings in header files [IPV6]: Use BUG_ON instead of if + BUG in fib6_del_route. [IPV6]: dst_entry leak in ip4ip6_err. (resend) bluetooth: do not move child device other than rfcomm bluetooth: put hci dev after del conn [NET]: Elminate spurious print_mac() calls. [BLUETOOTH] hci_sysfs.c: Kill build warning. [NET]: Remove MAC_FMT net/8021q/vlan_dev.c: Use print_mac. [XFRM]: Fix ordering issue in xfrm_dst_hash_transfer(). [BLUETOOTH] net/bluetooth/hci_core.c: Use time_* macros [IPV6]: Fix hardcoded removing of old module code [NETLABEL]: Move some initialization code into __init section. [NETLABEL]: Shrink the genl-ops registration code. [AX25] ax25_out: check skb for NULL in ax25_kick() [TCP]: Fix tcp_v4_send_synack() comment [IPV4]: fix alignment of IP-Config output Documentation: fix tcp.txt ...
2008-02-18bluetooth: do not move child device other than rfcommDave Young
hci conn child devices other than rfcomm tty should not be moved here. This is my lost, thanks for Barnaby's reporting and testing. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18bluetooth: put hci dev after del connDave Young
Move hci_dev_put to del_conn to avoid hci dev going away before hci conn. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18[BLUETOOTH] hci_sysfs.c: Kill build warning.David S. Miller
net/bluetooth/hci_sysfs.c: In function ‘del_conn’: net/bluetooth/hci_sysfs.c:339: warning: suggest parentheses around assignment used as truth value Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17[BLUETOOTH] net/bluetooth/hci_core.c: Use time_* macrosS.Çağlar Onur
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. So following patch implements usage of the time_after() macro, defined at linux/jiffies.h, which deals with wrapping correctly Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-13remove final fastcall usersHarvey Harrison
fastcall always expands to empty, remove it. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05bluetooth rfcomm tty: destroy before tty_close()Dave Young
rfcomm dev could be deleted in tty_hangup, so we must not call rfcomm_dev_del again to prevent from destroying rfcomm dev before tty close. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05bluetooth: uninliningAndrew Morton
Remove all those inlines which were either a) unneeded or b) increased code size. text data bss dec hex filename before: 6997 74 8 7079 1ba7 net/bluetooth/hidp/core.o after: 6492 74 8 6574 19ae net/bluetooth/hidp/core.o Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05bluetooth: hidp_process_hid_control remove unnecessary parameter dealingDave Young
According to the bluetooth HID spec v1.0 chapter 7.4.2 "This code requests a major state change in a BT-HID device. A HID_CONTROL request does not generate a HANDSHAKE response." "A HID_CONTROL packet with a parameter of VIRTUAL_CABLE_UNPLUG is the only HID_CONTROL packet a device can send to a host. A host will ignore all other packets." So in the hidp_precess_hid_control function, we just need to deal with the UNLUG packet. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BLUETOOTH]: Fix bugs in previous conn add/del workqueue changes.Dave Young
Jens Axboe noticed that we were queueing &conn->work on both btaddconn and keventd_wq. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[BLUETOOTH]: Add conn add/del workqueues to avoid connection fail.Dave Young
The bluetooth hci_conn sysfs add/del executed in the default workqueue. If the del_conn is executed after the new add_conn with same target, add_conn will failed with warning of "same kobject name". Here add btaddconn & btdelconn workqueues, flush the btdelconn workqueue in the add_conn function to avoid the issue. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[BLUETOOTH]: Use sockfd_put()Julia Lawall
The function sockfd_lookup uses fget on the value that is stored in the file field of the returned structure, so fput should ultimately be applied to this value. This can be done directly, but it seems better to use the specific macro sockfd_put, which does the same thing. The problem was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression s; @@ s = sockfd_lookup(...) ... + sockfd_put(s); ?- fput(s->file); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET]: Convert init_timer into setup_timerPavel Emelyanov
Many-many code in the kernel initialized the timer->function and timer->data together with calling init_timer(timer). There is already a helper for this. Use it for networking code. The patch is HUGE, but makes the code 130 lines shorter (98 insertions(+), 228 deletions(-)). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-23[BLUETOOTH]: Move children of connection device to NULL before connection down.Dave Young
The rfcomm tty device will possibly retain even when conn is down, and sysfs doesn't support zombie device moving, so this patch move the tty device before conn device is destroyed. For the bug refered please see : http://lkml.org/lkml/2007/12/28/87 Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-10[BLUETOOTH]: rfcomm tty BUG_ON() code fixDave Young
1) In tty.c the BUG_ON at line 115 will never be called, because the the before list_del_init in this same function. 115 BUG_ON(!list_empty(&dev->list)); So move the list_del_init to rfcomm_dev_del 2) The rfcomm_dev_del could be called from diffrent path (rfcomm_tty_hangup/rfcomm_dev_state_change/rfcomm_release_dev), So add another BUG_ON when the rfcomm_dev_del is called more than one time. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-29[BLUETOOTH]: put_device before device_del fixDave Young
Because of workqueue delay, the put_device could be called before device_del, so move it to del_conn. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01[NET]: Forget the zero_it argument of sk_alloc()Pavel Emelyanov
Finally, the zero_it argument can be completely removed from the callers and from the function prototype. Besides, fix the checkpatch.pl warnings about using the assignments inside if-s. This patch is rather big, and it is a part of the previous one. I splitted it wishing to make the patches more readable. Hope this particular split helped. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-22[Bluetooth] Convert RFCOMM to use kthread APIMarcel Holtmann
This patch does the full kthread conversion for the RFCOMM protocol. It makes the code slightly simpler and more maintainable. Based on a patch from Christoph Hellwig <hch@lst.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22[Bluetooth] Add support for handling simple eSCO linksMarcel Holtmann
With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22[Bluetooth] Add address and channel attribute to RFCOMM TTY deviceMarcel Holtmann
Export the remote device address and channel of RFCOMM TTY device via sysfs attributes. This allows udev to create better naming rules for configured RFCOMM devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22[Bluetooth] Fix wrong argument in debug code of HIDPDave Young
In the debug code of the hidp_queue_report function, the device variable does not exist, replace it with session->hid. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22[Bluetooth] Fall back to L2CAP in basic modeMarcel Holtmann
In case the remote entity tries to negogiate retransmission or flow control mode, reject it and fall back to basic mode. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22[Bluetooth] Advertise L2CAP features mask supportMarcel Holtmann
Indicate the support for the L2CAP features mask value when the remote entity tries to negotiate Bluetooth 1.2 specific features. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22[Bluetooth] Retrieve L2CAP features mask on connection setupMarcel Holtmann
The Bluetooth 1.2 specification introduced a specific features mask value to interoperate with newer versions of the specification. So far this piece of information was never needed, but future extensions will rely on it. This patch adds a generic way to retrieve this information only once per connection setup. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22[Bluetooth] Remove global conf_mtu variable from L2CAPMarcel Holtmann
After the change to the L2CAP configuration parameter handling the global conf_mtu variable is no longer needed and so remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22[Bluetooth] Finish L2CAP configuration only with acceptable settingsMarcel Holtmann
The parameters of the L2CAP output configuration might not be accepted after the first configuration round. So only indicate a finished output configuration when acceptable settings are provided. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22[Bluetooth] Switch from OGF+OCF to using only opcodesMarcel Holtmann
The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19get rid of input BIT* duplicate definesJiri Slaby
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10[BLUETOOTH]: Make hidp_setup_input() return intWANG Cong
This patch: - makes hidp_setup_input() return int to indicate errors; - checks its return value to handle errors. And this time it is against -rc7-mm1 tree. Thanks to roel and Marcel Holtmann for comments. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make socket creation namespace safe.Eric W. Biederman
This patch passes in the namespace a new socket should be created in and has the socket code do the appropriate reference counting. By virtue of this all socket create methods are touched. In addition the socket create methods are modified so that they will fail if you attempt to create a socket in a non-default network namespace. Failing if we attempt to create a socket outside of the default network namespace ensures that as we incrementally make the network stack network namespace aware we will not export functionality that someone has not audited and made certain is network namespace safe. Allowing us to partially enable network namespaces before all of the exotic protocols are supported. Any protocol layers I have missed will fail to compile because I now pass an extra parameter into the socket creation code. [ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12[BLUETOOTH]: Fix non-COMPAT build of hci_sock.cDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-09[Bluetooth] Fix parameter list for event filter commandMarcel Holtmann
On device initialization the event filters are cleared. In case of clearing the filters the extra condition type shall be omitted. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09[Bluetooth] Update security filter for Bluetooth 2.1Marcel Holtmann
This patch updates the HCI security filter with support for the Bluetooth 2.1 commands and events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09[Bluetooth] Add compat handling for timestamp structureMarcel Holtmann
The timestamp structure needs special handling in case of compat programs. Use the same wrapping method the network core uses. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-31[BLUETOOTH] l2cap: don't mangle cmd.lenAl Viro
Since nobody uses it after we convert it to host-endian, no need to do that at all. At that point l2cap is endian-clean. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[BLUETOOTH]: pass (host-endian) cmd length as explicit argument to ↵Al Viro
l2cap_conf_req() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[BLUETOOTH] l2cap: endianness annotationsAl Viro
no code changes, just documenting existing types Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[BLUETOOTH]: Fix endianness bug in l2cap_sock_listen()Al Viro
We loop through psm values, calling __l2cap_get_sock_by_addr(psm, ...) until we get NULL; then we set ->psm of our socket to htobs(psm). IOW, we find unused psm value and put it into our socket. So far, so good, but... __l2cap_get_sock_by_addr() compares its argument with ->psm of sockets. IOW, the entire thing works correctly only on little-endian. On big-endian we'll get "no socket with such psm" on the first iteration, since we won't find a socket with ->psm == 0x1001. We will happily conclude that 0x1001 is unused and slap htobs(0x1001) (i.e. 0x110) into ->psm of our socket. Of course, the next time around the same thing will repeat and we'll just get a fsckload of sockets with the same ->psm assigned. Fix: pass htobs(psm) to __l2cap_get_sock_by_addr() there. All other callers are already passing little-endian values and all places that store something in ->psm are storing little-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[IRDA]: Fix rfcomm use-after-freeMarcel Holtmann
Adrian Bunk wrote: > Commit 8de0a15483b357d0f0b821330ec84d1660cadc4e added the following > use-after-free in net/bluetooth/rfcomm/tty.c: > > <-- snip --> > > ... > static int rfcomm_dev_add(struct rfcomm_dev_req *req, struct rfcomm_dlc *dlc) > { > ... > if (IS_ERR(dev->tty_dev)) { > list_del(&dev->list); > kfree(dev); > return PTR_ERR(dev->tty_dev); > } > ... > > <-- snip --> > > Spotted by the Coverity checker. really good catch. I fully overlooked that one. The attached patch should fix it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-19[NET] BLUETOOTH: Fix whitespace errors.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-07-17Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-11[Bluetooth] Add basics to better support and handle eSCO linksMarcel Holtmann
To better support and handle eSCO links in the future a bunch of constants needs to be added and some basic routines need to be updated. This is the initial step. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11[Bluetooth] Keep rfcomm_dev on the list until it is freedVille Tervo
This patch changes the RFCOMM TTY release process so that the TTY is kept on the list until it is really freed. A new device flag is used to keep track of released TTYs. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11[Bluetooth] Hangup TTY before releasing rfcomm_devMikko Rapeli
The core problem is that RFCOMM socket layer ioctl can release rfcomm_dev struct while RFCOMM TTY layer is still actively using it. Calling tty_vhangup() is needed for a synchronous hangup before rfcomm_dev is freed. Addresses the oops at http://bugzilla.kernel.org/show_bug.cgi?id=7509 Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11[Bluetooth] Add hci_recv_fragment() helper functionMarcel Holtmann
Most drivers must handle fragmented HCI data packets and events. This patch adds a generic function for their reassembly to the Bluetooth core layer and thus allows to shrink the complexity of the drivers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-07Fix use-after-free oops in Bluetooth HID.David Woodhouse
When cleaning up HIDP sessions, we currently close the ACL connection before deregistering the input device. Closing the ACL connection schedules a workqueue to remove the associated objects from sysfs, but the input device still refers to them -- and if the workqueue happens to run before the input device removal, the kernel will oops when trying to look up PHYSDEVPATH for the removed input device. Fix this by deregistering the input device before closing the connections. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-24[Bluetooth] Fix L2CAP configuration parameter handlingMarcel Holtmann
The L2CAP configuration parameter handling was missing the support for rejecting unknown options. The capability to reject unknown options is mandatory since the Bluetooth 1.2 specification. This patch implements its and also simplifies the parameter parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>