aboutsummaryrefslogtreecommitdiff
path: root/net/ieee80211
AgeCommit message (Collapse)Author
2008-01-28ieee80211: beacon->capability is little-endianAl Viro
It's only a debugging printk, so it went unnoticed; still, the fix is trivial, so... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ieee80211: fix misannotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ieee80211softmac_auth_resp() fixAl Viro
The struct ieee8021_auth * passed to it comes straight from skb->data without any conversions; members of the struct are little-endian, so we'd better take that into account when doing switch by auth->algorithm, etc. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28several missing cpu_to_le16() in ieee80211softmac_capabilities()Al Viro
on some codepaths we forgot to convert to little-endian as we do on the rest of them and as the caller expects from us. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28eliminate byteswapping in struct ieee80211_qos_parametersAl Viro
Make it match the on-the-wire endianness, eliminate byteswapping. The only driver that used this sucker (ipw2200) updated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28wireless: fix '!x & y' typo'sRoel Kluin
Fix priority mistakes similar to '!x & y' Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28[IEEE80211]: Use htons() where appropriate.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28softmac: mark as obsolete and schedule for removalJohn W. Linville
Schedule softmac for for removal in the 2.6.26 development window. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET]: Convert init_timer into setup_timerPavel Emelyanov
Many-many code in the kernel initialized the timer->function and timer->data together with calling init_timer(timer). There is already a helper for this. Use it for networking code. The patch is HUGE, but makes the code 130 lines shorter (98 insertions(+), 228 deletions(-)). Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-30Merge branch 'fixes-davem' of ↵Herbert Xu
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2007-11-29ieee80211: fix unaligned access in ieee80211_copy_snapDaniel Drake
There is no guarantee that data+SNAP_SIZE will reside on an even numbered address, so doing a 16 bit read will cause an unaligned access in some situations. Based on a patch from Jun Sun. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-20ieee80211: Stop net_ratelimit/IEEE80211_DEBUG_DROP log pollutionGuillaume Chazarain
if (net_ratelimit()) IEEE80211_DEBUG_DROP(...) can pollute the logs with messages like: printk: 1 messages suppressed. printk: 2 messages suppressed. printk: 7 messages suppressed. if debugging information is disabled. These messages are printed by net_ratelimit(). Add a wrapper to net_ratelimit() that takes into account the log level, so that net_ratelimit() is called only when we really want to print something. Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10softmac: fix wext MLME request reason code endiannessJohannes Berg
The MLME request reason code is host-endian and our passing it to the low level functions is host-endian as well since they do the swapping. I noticed that the reason code 768 was sent (0x300) rather than 3 when wpa_supplicant terminates. This removes the superfluous cpu_to_le16() call. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-07[NET]: Removing duplicit #includesJiri Olsa
Removing duplicit #includes for net/ Signed-off-by: Jiri Olsa <olsajiri@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-02cleanup asm/scatterlist.h includesAdrian Bunk
Not architecture specific code should not #include <asm/scatterlist.h>. This patch therefore either replaces them with #include <linux/scatterlist.h> or simply removes them if they were unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24SG: Change sg_set_page() to take length and offset argumentJens Axboe
Most drivers need to set length and offset as well, so may as well fold those three lines into one. Add sg_assign_page() for those two locations that only needed to set the page, where the offset/length is set outside of the function context. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24m68k: sg falloutGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2007-10-23[PATCH] Fix breakage after SG cleanupsRalf Baechle
Commits 58b053e4ce9d2fc3023645c1b96e537c72aa8d9a ("Update arch/ to use sg helpers") 45711f1af6eff1a6d010703b4862e0d2b9afd056 ("[SG] Update drivers to use sg helpers") fa05f1286be25a8ce915c5dd492aea61126b3f33 ("Update net/ to use sg helpers") converted many files to use the scatter gather helpers without ensuring that the necessary headerfile <linux/scatterlist> is included. This happened to work for ia64, powerpc, sparc64 and x86 because they happened to drag in that file via their <asm/dma-mapping.h>. On most of the others this probably broke. Instead of increasing the header file spider web I choose to include <linux/scatterlist.h> directly into the affectes files. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22Update net/ to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-19Spelling fix: explicitlyJean Delvare
From: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-16[PATCH] ieee80211: fix TKIP QoS bugJohannes Berg
The commit 65b6a277 titled "ieee80211: Fix header->qos_ctl endian issue" *introduced* an endianness bug. Partially revert it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[IEEE80211]: Fix softmac lockdep reports.Johannes Berg
It seems I was actually able to hit this deadlock, on my quad G5 softmac locks up more often than not. This fixes it by using an own workqueue that can safely be flushed under RTNL. Not sure if the patch is correct with the workqueue naming. And don't think with the patch it doesn't continually lock up. It still does, just doesn't invoke lockdep warnings all the time. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make /proc/net per network namespaceEric W. Biederman
This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: DIV_ROUND_UP cleanup (part two)Ilpo Järvinen
Hopefully captured all single statement cases under net/. I'm not too sure if there is some policy about #includes that are "guaranteed" (ie., in the current tree) to be available through some other #included header, so I just added linux/kernel.h to each changed file that didn't #include it previously. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-10-02[PATCH] softmac: Fix compiler-warningRichard Knutsson
CC net/ieee80211/softmac/ieee80211softmac_wx.o /home/kernel/src/net/ieee80211/softmac/ieee80211softmac_wx.c: In function ‘ieee80211softmac_wx_set_essid’: /home/kernel/src/net/ieee80211/softmac/ieee80211softmac_wx.c:117: warning: label ‘out’ defined but not used due to commit: efe870f9f4ad74410a18ecbf0d9ba7c14b50a0fb. Removing the label. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-01[IEEE80211]: avoid integer underflow for runt rx framesJohn W. Linville
Reported by Chris Evans <scarybeasts@gmail.com>: > The summary is that an evil 80211 frame can crash out a victim's > machine. It only applies to drivers using the 80211 wireless code, and > only then to certain drivers (and even then depends on a card's > firmware not dropping a dubious packet). I must confess I'm not > keeping track of Linux wireless support, and the different protocol > stacks etc. > > Details are as follows: > > ieee80211_rx() does not explicitly check that "skb->len >= hdrlen". > There are other skb->len checks, but not enough to prevent a subtle > off-by-two error if the frame has the IEEE80211_STYPE_QOS_DATA flag > set. > > This leads to integer underflow and crash here: > > if (frag != 0) > flen -= hdrlen; > > (flen is subsequently used as a memcpy length parameter). How about this? Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-21[PATCH] softmac: Fix inability to associate with WEP networksLarry Finger
Commit 4cf92a3c was submitted as a fix for bug #8686 at bugzilla.kernel.org (http://bugzilla.kernel.org/show_bug.cgi?id=8686). Unfortunately, the fix led to a new bug, reported by Yoshifuji Hideaki, that prevented association for WEP encrypted networks that use ifconfig to control the device. This patch effectively reverts the earlier commit and does a proper fix for bug #8686. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-08-06[PATCH] softmac: Fix deadlock of wx_set_essid with assoc workMichael Buesch
The essid wireless extension does deadlock against the assoc mutex, as we don't unlock the assoc mutex when flushing the workqueue, which also holds the lock. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-17[PATCH] softmac: Channel is listed twice in scan outputJean Tourrilhes
SoftMAC outputs the channel twice in the scan output. It should display frequency and channel, but only once for each. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-10[PATCH] softmac: Fix ESSID problemJean Tourrilhes
Victor Porton reported that the SoftMAC layer had random problem when setting the ESSID : http://bugzilla.kernel.org/show_bug.cgi?id=8686 After investigation, it turned out to be worse, the SoftMAC layer is left in an inconsistent state. The fix is pretty trivial. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Acked-by: Michael Buesch <mb@bu3sch.df> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-07-08[PATCH] softmac: use list_for_each_entryAkinobu Mita
Cleanup using list_for_each_entry. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Joe Jezak <josejx@gentoo.org> Cc: Daniel Drake <dsd@gentoo.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-29[PATCH] softmac: alloc_ieee80211() NULL checkAkinobu Mita
This patch adds missing NULL check and trims a line longer than 80 columns. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Joe Jezak <josejx@gentoo.org> Cc: Daniel Drake <dsd@gentoo.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-29[PATCH] ieee80211: fix incomplete error messageAkinobu Mita
Fix error message: Unable to network device. --> Unable to allocate network device. Cc: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-08[PATCH] ieee80211: include frequency in scan resultsLarry Finger
In ieee80211, the output of scan results lists channels, but not frequencies, which are needed by NetworkManager. This patch uses the new ieee80211_channel_to_freq routine to add the frequency to the output. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-05-08[PATCH] ieee80211: add ieee80211_channel_to_freqLarry Finger
The routines that interrogate the ieee80211_geo struct are missing a channel to frequency entry. This patch adds it. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] ieee80211: add missing global needed by IEEE80211_DEBUG_XXXXLarry Finger
Using any of the IEEE80211_DEBUG_XXXX macros in any ieee80211_crypt routine built as a module results in a missing global for 'ieee80211_debug_level'. The fix is to export the symbol in ieee80211. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] ieee80211-crypt: Make some TKIP and CCMP error logging conditionalLarry Finger
There are messages arising from ieee80211_crypt that spam the logs of casual users. These are changed to be logged only if the user specifically requests the IEEE80211_DEBUG_DROP messages. In either case, the error/drop count is incremented. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28[PATCH] Update my email address from jkmaline@cc.hut.fi to j@w1.fiJouni Malinen
After 13 years of use, it looks like my email address is finally going to disappear. While this is likely to drop the amount of incoming spam greatly ;-), it may also affect more appropriate messages, so let's update my email address in various places. In addition, Host AP mailing list is subscribers-only and linux-wireless can also be used for discussing issues related to this driver which is now shown in MAINTAINERS. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-25[WIRELESS]: Refactor wireless Kconfig.Johannes Berg
This patch refactors the wireless Kconfig all over and already introduces net/wireless/Kconfig with just the WEXT bit for now, the cfg80211 patch will add to that as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-25[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25[SK_BUFF]: Convert skb->end to sk_buff_data_tArnaldo Carvalho de Melo
Now to convert the last one, skb->data, that will allow many simplifications and removal of some of the offset helpers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: unions of just one member don't get anything done, kill themArnaldo Carvalho de Melo
Renaming skb->h to skb->transport_header, skb->nh to skb->network_header and skb->mac to skb->mac_header, to match the names of the associated helpers (skb[_[re]set]_{transport,network,mac}_header). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iphArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Some more simple skb_reset_network_header conversionsArnaldo Carvalho de Melo
This time of the type: skb->nh.iph = (struct iphdr *)skb->data; That is completely equivalent to: skb->nh.raw = skb->data; Wonder why people love casts... :-) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_reset_network_header(skb)Arnaldo Carvalho de Melo
For the common, open coded 'skb->nh.raw = skb->data' operation, so that we can later turn skb->nh.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_reset_mac_header(skb)Arnaldo Carvalho de Melo
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in 64bit land while possibly keeping it as a pointer on 32bit. This one touches just the most simple case, next will handle the slightly more "complex" cases. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 01:06:50 +0000