aboutsummaryrefslogtreecommitdiff
path: root/net/ipv4/arp.c
AgeCommit message (Collapse)Author
2009-06-03net: skb->dst accessorsEric Dumazet
Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03net: skb->rtable accessorEric Dumazet
Define skb_rtable(const struct sk_buff *skb) accessor to get rtable from skb Delete skb->rtable field Setting rtable is not allowed, just set dst instead as rtable is an alias. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13ipv4: arp announce, arp_proxy and windows ip conflict verificationDenys Fedoryshchenko
Windows (XP at least) hosts on boot, with configured static ip, performing address conflict detection, which is defined in RFC3927. Here is quote of important information: " An ARP announcement is identical to the ARP Probe described above, except that now the sender and target IP addresses are both set to the host's newly selected IPv4 address. " But it same time this goes wrong with RFC5227. " The 'sender IP address' field MUST be set to all zeroes; this is to avoid polluting ARP caches in other hosts on the same link in the case where the address turns out to be already in use by another host. " When ARP proxy configured, it must not answer to both cases, because it is address conflict verification in any case. For Windows it is just causing to detect false "ip conflict". Already there is code for RFC5227, so just trivially we just check also if source ip == target ip. Signed-off-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13Network Drop Monitor: Adding kfree_skb_clean for non-drops and modifying ↵Neil Horman
end-of-line points for skbs Signed-off-by: Neil Horman <nhorman@tuxdriver.com> include/linux/skbuff.h | 4 +++- net/core/datagram.c | 2 +- net/core/skbuff.c | 22 ++++++++++++++++++++++ net/ipv4/arp.c | 2 +- net/ipv4/udp.c | 2 +- net/packet/af_packet.c | 2 +- 6 files changed, 29 insertions(+), 5 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-10net: convert usage of packet_type to read_mostlyStephen Hemminger
Protocols that use packet_type can be __read_mostly section for better locality. Elminate any unnecessary initializations of NULL. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01net: replace uses of __constant_{endian}Harvey Harrison
Base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16ipv4: Fix ARP behavior with many mac-vlansBen Greear
Ben Greear wrote: > I have 500 mac-vlans on a system talking to 500 other > mac-vlans. My problem is that the arp-table gets extremely > huge because every time an arp-request comes in on all mac-vlans, > a stale arp entry is added for each mac-vlan. I have filtering > turned on, but that doesn't help because the neigh_event_ns call > below will cause a stale neighbor entry to be created regardless > of whether a replay will be sent or not. > Maybe the neigh_event code should be below the checks for dont_send, > and only create check neigh_event_ns if we are !dont_send? The attached patch makes it work much better for me. The patch will cause the code to NOT create a stale neighbor entry if we are not going to respond to the ARP request. The old code *would* create a stale entry even if we are not going to respond. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03net: clean up net/ipv4/pararp.cJianjun Kong
Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31net: replace NIPQUAD() in net/ipv4/ net/ipv6/Harvey Harrison
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-20netfilter: replace old NF_ARP calls with NFPROTO_ARPJan Engelhardt
(Supplements: ee999d8b9573df1b547aacdc6d79f86eb79c25cd) NFPROTO_ARP actually has a different value from NF_ARP, so ensure all callers use the new value so that packets _do_ get delivered to the registered hooks. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16mib: add net to NET_INC_STATS_BHPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16inet: prepare net on the stack for NET accounting macrosPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-05netns: add namespace parameter to rt_cache_flushDenis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-11net: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-21net/ipv4/arp.c: Use common hex_asc helpersDenis Cheng
Here the local hexbuf is a duplicate of global const char hex_asc from lib/hexdump.c, except the hex letters' cases: const char hexbuf[] = "0123456789ABCDEF"; const char hex_asc[] = "0123456789abcdef"; and here to print HW addresses, the hex cases are not significant. Thanks to Harvey Harrison to introduce the hex_asc_hi/hex_asc_lo helpers. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-12net: Allow netdevices to specify needed head/tailroomJohannes Berg
This patch adds needed_headroom/needed_tailroom members to struct net_device and updates many places that allocate sbks to use them. Not all of them can be converted though, and I'm sure I missed some (I mostly grepped for LL_RESERVED_SPACE) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-14[IPV4]: Use NIPQUAD_FMT to format ipv4 addresses.YOSHIFUJI Hideaki
And use %u to format port. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-24[NETNS]: /proc/net/arp namespacing.Denis V. Lunev
Seqfile operation showing /proc/net/arp are already namespace aware. All we need is to register this file for each namespace. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-24[NETNS]: Process ARP in the context of the correct namespace.Denis V. Lunev
Get namespace from a device and pass it to the routing engine. Enable ARP packet processing and device notifiers after that. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05[IPV4]: Add 'rtable' field in struct sk_buff to alias 'dst' and avoid castsEric Dumazet
(Anonymous) unions can help us to avoid ugly casts. A common cast it the (struct rtable *)skb->dst one. Defining an union like : union { struct dst_entry *dst; struct rtable *rtable; }; permits to use skb->rtable in place. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[ARP]: Introduce the arp_hdr_len helper.Pavel Emelyanov
There are some place, that calculate the ARP header length. These calculations are correct, but a) some operate with "magic" constants, b) enlarge the code length (sometimes at the cost of coding style), c) are not informative from the first glance. The proposal is to introduce a helper, that includes all the good sides of these calculations. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17Revert "[NDISC]: Fix race in generic address resolution"David S. Miller
This reverts commit 69cc64d8d92bf852f933e90c888dfff083bd4fc9. It causes recursive locking in IPV6 because unlike other neighbour layer clients, it even needs neighbour cache entries to send neighbour soliciation messages :-( We'll have to find another way to fix this race. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-12[NDISC]: Fix race in generic address resolutionDavid S. Miller
Frank Blaschka provided the bug report and the initial suggested fix for this bug. He also validated this version of this fix. The problem is that the access to neigh->arp_queue is inconsistent, we grab references when dropping the lock lock to call neigh->ops->solicit() but this does not prevent other threads of control from trying to send out that packet at the same time causing corruptions because both code paths believe they have exclusive access to the skb. The best option seems to be to hold the write lock on neigh->lock during the ->solicit() call. I looked at all of the ndisc_ops implementations and this seems workable. The only case that needs special care is the IPV4 ARP implementation of arp_solicit(). It wants to take neigh->lock as a reader to protect the header entry in neigh->ha during the emission of the soliciation. We can simply remove the read lock calls to take care of that since holding the lock as a writer at the caller providers a superset of the protection afforded by the existing read locking. The rest of the ->solicit() implementations don't care whether the neigh is locked or not. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[NETFILTER]: ebtables: remove casts, use constsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add namespace parameter to ip_route_output_key.Denis V. Lunev
Needed to propagate it down to the ip_route_output_flow. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Process inet_confirm_addr in the correct namespace.Denis V. Lunev
inet_confirm_addr can be called with NULL in_dev from arp_ignore iff scope is RT_SCOPE_LINK. Lets always pass the device and check for RT_SCOPE_LINK scope inside inet_confirm_addr. This let us take network namespace from in_device a need for an additional argument. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Remove extra argument from arp_ignore.Denis V. Lunev
arp_ignore has two arguments: dev & in_dev. dev is used for inet_confirm_addr calling only. inet_confirm_addr, in turn, either gets in_dev from the device passed or iterates over all network devices if the device passed is NULL. It seems logical to directly pass in_dev into inet_confirm_addr. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Make arp code network namespace consistent.Denis V. Lunev
Some calls in the arp.c have network namespace as an argument. Getting init_net inside these functions is simply inconsistent. Fix this. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[ARP]: Move inet_addr_type call after simple error checks in arp_contructor.Denis V. Lunev
The neighbour entry will be destroyed in the case of error, so it is pointless to perform constly routing table lookup in this case. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add netns parameter to inet_(dev_)add_type.Eric W. Biederman
The patch extends the inet_addr_type and inet_dev_addr_type with the network namespace pointer. That allows to access the different tables relatively to the network namespace. The modification of the signature function is reported in all the callers of the inet_addr_type using the pointer to the well known init_net. Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Remove unsupported DNAT (RTCF_NAT and RTCF_NAT) in IPV4Rami Rosen
- The DNAT (Destination NAT) is not implemented in IPV4. - This patch remove the code which checks these flags in net/ipv4/arp.c and net/ipv4/route.c. The RTCF_NAT and RTCF_NAT should stay in the header (linux/in_route.h) because they are used in DECnet. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Modify the neighbour table code so it handles multiple network ↵Eric W. Biederman
namespaces I'm actually surprised at how much was involved. At first glance it appears that the neighbour table data structures are already split by network device so all that should be needed is to modify the user interface commands to filter the set of neighbours by the network namespace of their devices. However a couple things turned up while I was reading through the code. The proxy neighbour table allows entries with no network device, and the neighbour parms are per network device (except for the defaults) so they now need a per network namespace default. So I updated the two structures (which surprised me) with their very own network namespace parameter. Updated the relevant lookup and destroy routines with a network namespace parameter and modified the code that interacts with users to filter out neighbour table entries for devices of other namespaces. I'm a little concerned that we can modify and display the global table configuration and from all network namespaces. But this appears good enough for now. I keep thinking modifying the neighbour table to have per network namespace instances of each table type would should be cleaner. The hash table is already dynamically sized so there are it is not a limiter. The default parameter would be straight forward to take care of. However when I look at the how the network table is built and used I still find some assumptions that there is only a single neighbour table for each type of table in the kernel. The netlink operations, neigh_seq_start, the non-core network users that call neigh_lookup. So while it might be doable it would require more refactoring than my current approach of just doing a little extra filtering in the code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4] net/ipv4: Use ipv4_is_<type>Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Switch users of ipv4_devconf(_all) to use the pernet onePavel Emelyanov
These are scattered over the code, but almost all the "critical" places already have the proper struct net at hand except for snmp proc showing function and routing rtnl handler. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV4]: Pass the net pointer to the arp_req_set_proxy()Pavel Emelyanov
This one will need to set the IPV4_DEVCONF_ALL(PROXY_ARP), but there's no ways to get the net right in place, so we have to pull one from the inet_ioctl's struct sock. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[ARP]: Consolidate some code in arp_req_set/delete_publcPavel Emelyanov
The PROXY_ARP is set on devconfigs in a similar way in both calls. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[ARP]: Minus one level of ndentation in arp_req_deletePavel Emelyanov
The same cleanup for deletion requests. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[ARP]: Minus one level of indentation in arp_req_setPavel Emelyanov
The ATF_PUBL requests are handled completely separate from the others. Emphasize it with a separate function. This also reduces the indentation level. The same issue exists with the arp_delete_request, but when I tried to make it in one patch diff produced completely unreadable patch. So I split it into two, but they may be done with one commit. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-25IPoIB: improve IPv4/IPv6 to IB mcast mapping functionsRolf Manderscheid
An IPoIB subnet on an IB fabric that spans multiple IB subnets can't use link-local scope in multicast GIDs. The existing routines that map IP/IPv6 multicast addresses into IB link-level addresses hard-code the scope to link-local, and they also leave the partition key field uninitialised. This patch adds a parameter (the link-level broadcast address) to the mapping routines, allowing them to initialise both the scope and the P_Key appropriately, and fixes up the call sites. The next step will be to add a way to configure the scope for an IPoIB interface. Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-12-19[IPV4] ARP: Remove not used codeMark Ryden
In arp_process() (net/ipv4/arp.c), there is unused code: definition and assignment of tha (target hw address ). Signed-off-by: Mark Ryden <markryde@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-26[IPV4]: Remove bogus ifdef mess in arp_processAdrian Bunk
The #ifdef's in arp_process() were not only a mess, they were also wrong in the CONFIG_NET_ETHERNET=n and (CONFIG_NETDEV_1000=y or CONFIG_NETDEV_10000=y) cases. Since they are not required this patch removes them. Also removed are some #ifdef's around #include's that caused compile errors after this change. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-20[ARP]: Fix arp reply when sender ip 0Jonas Danielsson
Fix arp reply when received arp probe with sender ip 0. Send arp reply with target ip address 0.0.0.0 and target hardware address set to hardware address of requester. Previously sent reply with target ip address and target hardware address set to same as source fields. Signed-off-by: Jonas Danielsson <the.sator@gmail.com> Acked-by: Alexey Kuznetov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make core networking code use seq_open_privatePavel Emelyanov
This concerns the ipv4 and ipv6 code mostly, but also the netlink and unix sockets. The netlink code is an example of how to use the __seq_open_private() call - it saves the net namespace on this private. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Move hardware header operations out of netdevice.Stephen Hemminger
Since hardware header operations are part of the protocol class not the device instance, make them into a separate object and save memory. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Wrap netdevice hardware header creation.Stephen Hemminger
Add inline for common usage of hardware header creation, and fix bug in IPV6 mcast where the assumption about negative return is an errno. Negative return from hard_header means not enough space was available,(ie -N bytes). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make the device list and device lookups per namespace.Eric W. Biederman
This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make device event notification network namespace safeEric W. Biederman
Every user of the network device notifiers is either a protocol stack or a pseudo device. If a protocol stack that does not have support for multiple network namespaces receives an event for a device that is not in the initial network namespace it quite possibly can get confused and do the wrong thing. To avoid problems until all of the protocol stacks are converted this patch modifies all netdev event handlers to ignore events on devices that are not in the initial network namespace. As the rest of the code is made network namespace aware these checks can be removed. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make packet reception network namespace safeEric W. Biederman
This patch modifies every packet receive function registered with dev_add_pack() to drop packets if they are not from the initial network namespace. This should ensure that the various network stacks do not receive packets in a anything but the initial network namespace until the code has been converted and is ready for them. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make /proc/net per network namespaceEric W. Biederman
This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>