aboutsummaryrefslogtreecommitdiff
path: root/net/ipv4/tcp_cubic.c
AgeCommit message (Collapse)Author
2008-01-28[TCP]: Cong.ctrl modules: remove unused good_ack from cong_avoidIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[TCP]: Remove num_acked>0 checks from cong.ctrl mods pkts_ackedIlpo Järvinen
There is no need for such check in pkts_acked because the callback is not invoked unless at least one segment got fully ACKed (i.e., the snd_una moved past skb's end_seq) by the cumulative ACK's snd_una advancement. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[TCP]: cubic - eliminate use of receive time stampStephen Hemminger
Remove use of received timestamp option value from RTT calculation in Cubic. A hostile receiver may be returning a larger timestamp option than the original value. This would cause the sender to believe the malevolent receiver had a larger RTT and because Cubic tries to provide some RTT friendliness, the sender would then favor the liar. Instead, use the jiffie resolutionRTT value already computed and passed back after ack. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[TCP]: congestion control API pass RTT in microsecondsStephen Hemminger
This patch changes the API for the callback that is done after an ACK is received. It solves a couple of issues: * Some congestion controls want higher resolution value of RTT (controlled by TCP_CONG_RTT_SAMPLE flag). These don't really want a ktime, but all compute a RTT in microseconds. * Other congestion control could use RTT at jiffies resolution. To keep API consistent the units should be the same for both cases, just the resolution should change. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18[TCP]: remove unused argument to cong_avoid opStephen Hemminger
None of the existing TCP congestion controls use the rtt value pased in the ca_ops->cong_avoid interface. Which is lucky because seq_rtt could have been -1 when handling a duplicate ack. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-13[TCP]: Set initial_ssthresh default to zero in Cubic and BIC.David S. Miller
Because of the current default of 100, Cubic and BIC perform very poorly compared to standard Reno. In the worst case, this change makes Cubic and BIC as aggressive as Reno. So this change should be very safe. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TCP]: Congestion control API update.Stephen Hemminger
Do some simple changes to make congestion control API faster/cleaner. * use ktime_t rather than timeval * merge rtt sampling into existing ack callback this means one indirect call versus two per ack. * use flags bits to store options/settings Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TCP]: cubic update for net-2.6.22Stephen Hemminger
The following update received from Injong updates TCP cubic to the latest version. I am running more complete tests and will have results after 4/1. According to Injong: the new version improves on its scalability, fairness and stability. So in all properties, we confirmed it shows better performance. NCSU results (for 2.6.18 and 2.6.20) available: http://netsrv.csc.ncsu.edu/wiki/index.php/TCP_Testing This version is described in a new Internet draft for CUBIC. http://www.ietf.org/internet-drafts/draft-rhee-tcp-cubic-00.txt Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TCP]: cubic optimizationStephen Hemminger
Use willy's work in optimizing cube root by having table for small values. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TCP] tcp_cubic: faster cube rootStephen Hemminger
The Newton-Raphson method is quadratically convergent so only a small fixed number of steps are necessary. Therefore it is faster to unroll the loop. Since div64_64 is no longer inline it won't cause code explosion. Also fixes a bug that can occur if x^2 was bigger than 32 bits. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[NET]: div64_64 consolidate (rev3)Stephen Hemminger
Here is the current version of the 64 bit divide common code. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-12[TCP]: Use read mostly for CUBIC parameters.Stephen Hemminger
These module parameters should be in the read mostly area to avoid cache pollution. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10[NET] IPV4: Fix whitespace errors.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-25[TCP] cubic: scaling errorStephen Hemminger
Doug Leith observed a discrepancy between the version of CUBIC described in the papers and the version in 2.6.18. A math error related to scaling causes Cubic to grow too slowly. Patch is from "Sangtae Ha" <sha2@ncsu.edu>. I validated that it does fix the problems. See the following to show behavior over 500ms 100 Mbit link. Sender (2.6.19-rc3) --- Bridge (2.6.18-rt7) ------- Receiver (2.6.19-rc3) 1G [netem] 100M http://developer.osdl.org/shemminger/tcp/2.6.19-rc3/cubic-orig.png http://developer.osdl.org/shemminger/tcp/2.6.19-rc3/cubic-fix.png Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[TCP] Congestion control (modulo lp, bic): use BUILD_BUG_ONAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-17[TCP]: Minimum congestion window consolidation.Stephen Hemminger
Many of the TCP congestion methods all just use ssthresh as the minimum congestion window on decrease. Rather than duplicating the code, just have that be the default if that handle in the ops structure is not set. Minor behaviour change to TCP compound. It probably wants to use this (ssthresh) as lower bound, rather than ssthresh/2 because the latter causes undershoot on loss. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03[TCP] cubic: use Newton-RaphsonStephen Hemminger
Replace cube root algorithim with a faster version using Newton-Raphson. Surprisingly, doing the scaled div64_64 is faster than a true 64 bit division on 64 bit CPU's. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03[TCP] cubic: precompute constantsStephen Hemminger
Revised version of patch to pre-compute values for TCP cubic. * d32,d64 replaced with descriptive names * cube_factor replaces srtt[scaled by count] / HZ * ((1 << (10+2*BICTCP_HZ)) / bic_scale) * beta_scale replaces 8*(BICTCP_BETA_SCALE+beta)/3/(BICTCP_BETA_SCALE-beta); Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03[TCP] BIC: CUBIC window growth (2.0)Stephen Hemminger
Replace existing BIC version 1.1 with new version 2.0. The main change is to replace the window growth function with a cubic function as described in: http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/cubic-paper.pdf Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>