aboutsummaryrefslogtreecommitdiff
path: root/net/ipv6/route.c
AgeCommit message (Collapse)Author
2008-06-05[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs.YOSHIFUJI Hideaki
- Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-20ipsec: Use the correct ip_local_out functionHerbert Xu
Because the IPsec output function xfrm_output_resume does its own dst_output call it should always call __ip_local_output instead of ip_local_output as the latter may invoke dst_output directly. Otherwise the return values from nf_hook and dst_output may clash as they both use the value 1 but for different purposes. When that clash occurs this can cause a packet to be used after it has been freed which usually leads to a crash. Because the offending value is only returned from dst_output with qdiscs such as HTB, this bug is normally not visible. Thanks to Marco Berizzi for his perseverance in tracking this down. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19ipv6 addrconf: Allow infinite prefix lifetime.YOSHIFUJI Hideaki
We need to handle infinite prefix lifetime specially. With help from original reporter "Bonitch, Joseph" <Joseph.Bonitch@xerox.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19ipv6 route: Fix lifetime in netlink.YOSHIFUJI Hideaki
We could not see appropriate lifetime if the route had been scheduled to expired at 0 (in jiffies). We should check rt6i_flags instead of rt6i_expires to determine whether lifetime is valid or not. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19ipv6 addrconf: Fix route lifetime setting in corner case.YOSHIFUJI Hideaki
Because of arithmetic overflow avoidance, the actual lifetime setting (vs the value given by RA) did not increase monotonically around 0x7fffffff/HZ. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-04ip: Use inline function dst_metric() instead of direct access to dst->metric[]Satoru SATOH
There are functions to refer to the value of dst->metric[THE_METRIC-1] directly without use of a inline function "dst_metric" defined in net/dst.h. The following patch changes them to use the inline function consistently. Signed-off-by: Satoru SATOH <satoru.satoh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-21[NETNS]: Don't initialize err variable twice.Pavel Emelyanov
The ip6_route_net_init() performs some unneeded actions. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-21[IPV6]: Make struct ip6_prohibit_entry_template static.Adrian Bunk
This patch makes the needlessly global struct ip6_prohibit_entry_template static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16[NETNS]: Add netns refcnt debug for dst ops.Denis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-12[IPV6]: Make address arguments const.YOSHIFUJI Hideaki
- net/ipv6/addrconf.c: ipv6_get_ifaddr(), ipv6_dev_get_saddr() - net/ipv6/mcast.c: ipv6_sock_mc_join(), ipv6_sock_mc_drop(), inet6_mc_check(), ipv6_dev_mc_inc(), __ipv6_dev_mc_dec(), ipv6_dev_mc_dec(), ipv6_chk_mcast_addr() - net/ipv6/route.c: rt6_lookup(), icmp6_dst_alloc() - net/ipv6/ip6_output.c: ip6_nd_hdr() - net/ipv6/ndisc.c: ndisc_send_ns(), ndisc_send_rs(), ndisc_send_redirect(), ndisc_get_neigh(), __ndisc_send() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-08Merge branch 'net-2.6.26-isatap-20080403' of ↵David S. Miller
git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-dev
2008-04-05[IPV6] MROUTE: Support multicast forwarding.YOSHIFUJI Hideaki
Based on ancient patch by Mickael Hoerdt <hoerdt@clarinet.u-strasbg.fr>, which is available at <http://www-r2.u-strasbg.fr/~hoerdt/dev/linux_ipv6_mforwarding/patch-linux-ipv6-mforwarding-0.1a>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-03[IPV6] SIT: Add PRL management for ISATAP.Templin, Fred L
This patch updates the Linux the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) implementation. It places the ISATAP potential router list (PRL) in the kernel and adds three new private ioctls for PRL management. [Add several changes of structure name, constant names etc. - yoshfuji] Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[IPV6]: Fix potential net leak and oops in ipv6 routing code.Pavel Emelyanov
The commits f3db4851 ([NETNS][IPV6] ip6_fib - fib6_clean_all handle several network namespaces) and 69ddb805 ([NETNS][IPV6] route6 - Make proc entry /proc/net/rt6_stats per namespace) made some proc files per net. Both of them introduced potential OOPS - get_proc_net can return NULL, but this check is lost - and a struct net leak - in case single_open() fails the previously got net is not put. Kill all these bugs with one patch. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25[IPV6]: Support Source Address Selection API (RFC5014).YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25[IPV6]: Optimize hop-limit determination.YOSHIFUJI Hideaki
Last part of hop-limit determination is always: hoplimit = dst_metric(dst, RTAX_HOPLIMIT); if (hoplimit < 0) hoplimit = ipv6_get_hoplimit(dst->dev). Let's consolidate it as ip6_dst_hoplimit(dst). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-07[NETNS][IPV6] fix some missing namespaceDaniel Lezcano
This patch adds some missing namespace Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05net: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05[NETNS][IPV6] route6 - add netns parameter to ip6_route_outputDaniel Lezcano
Add an netns parameter to ip6_route_output. That will allow to access to the right routing table for outgoing traffic. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] route6 - Make ip6_dst_gc simplerDaniel Lezcano
This patches improves the readibility of the ip6_dst_gc() routine. It simplifies long lines which grow a lot due to the introduction of network namespaces support. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] route6 - make garbage collection work with multiple network ↵Benjamin Thery
namespaces This patch makes the necessary changes to make IPv6 dst_entry garbage collection work with multiple network namespaces. In ip6_dst_gc(), static local variables are now declared per-namespace. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] route6 - move ip6_dst_ops inside the network namespaceBenjamin Thery
The ip6_dst_ops is moved inside the network namespace structure. All references to this structure are now relative to the initial network namespace. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] route6 - dynamically allocate ip6_dst_opsDaniel Lezcano
ip6_dst_ops is dynamically allocated in init and exit functions. That provides the ability to do multiple instanciations of this structure. This will be needed for network namespaces, indeed dst_ops stores data that are required to be per namespace: entries and gc_thresh. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] rt6_info - move rt6_info structure inside the namespaceDaniel Lezcano
The rt6_info structures are moved inside the network namespace structure. All references to these structures are now relative to the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] rt6_info - make rt6_info accessed as a pointerDaniel Lezcano
This patch make mindless changes and prepares the code to use dynamic allocation for rt6_info structure. The code accesses the rt6_info structure as a pointer instead of a global static variable. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] route6 - make route6 per namespaceDaniel Lezcano
This patch makes the routing engine use the network namespaces to access routing informations: Add a network namespace parameter to ipv6_route_ioctl and propagate the network namespace value to all the routing code that have not yet been changed. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] route6 - Pass the network namespace parameter to ↵Daniel Lezcano
rt6_purge_dflt_routers Add a network namespace parameter to rt6_purge_dflt_routers. This is needed to call fib6_get_table with the appropriate network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] route6 - Pass network namespace to rt6_add_route_info and ↵Daniel Lezcano
rt6_get_route_info Add a network namespace parameter to rt6_add_route_info() and rt6_get_route_info to enable them to handle multiple network namespaces. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] route6 - Make proc entry /proc/net/rt6_stats per namespaceDaniel Lezcano
Make the proc entry /proc/net/rt6_stats work in all network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] route6 - Pass the network namespace parameter to rt6_lookupDaniel Lezcano
Add a network namespace parameter to rt6_lookup(). Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] route6 - create route6 proc files for the namespaceDaniel Lezcano
Make /proc/net/ipv6_route and /proc/net/rt6_stats to be per namespace. These proc files are now created when the network namespace is initialized. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] rt6_stats - make the stats per network namespaceBenjamin Thery
The rt6_stats is now per namespace with this patch. It is allocated when a network namespace is created and freed when the network namespace exits and references are relative to the network namespace. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] rt6_stats - dynamically allocate the routes statisticsDaniel Lezcano
This patch allocates the rt6_stats struct dynamically when the fib6 is initialized. That provides the ability to create several instances of this structure for the network namespaces. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] ip6_fib - gc timer per namespaceDaniel Lezcano
Move the timer initialization at the network namespace creation and store the network namespace in the timer argument. That enables multiple timers (one per network namespace) to do garbage collecting. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] ip6_fib - add net to gc timer parameterDaniel Lezcano
The fib tables are now relative to the network namespace. When the garbage collector timer expires, we must have a network namespace parameter in order to retrieve the tables. For now this is the init_net, but we should be able to have a timer per namespace and use the timer callback parameter to pass the network namespace from the expired timer. The timer callback, fib6_run_gc, is actually used to be called synchronously by some functions and asynchronously when the timer expires. When the timer expires, the delay specified for fib6_run_gc parameter is always zero. So, I changed fib6_run_gc to not be a timer callback but a function called by the timer callback and I added a timer callback where its work is just to retrieve from the data arg of the timer the network namespace and call fib6_run_gc with zero expiring time and the network namespace parameters. That makes the code cleaner for the fib6_run_gc callers. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] ip6_fib - fib6_clean_all handle several network namespacesDaniel Lezcano
The function fib6_clean_all takes the network namespace as parameter. That allows to flush the routes related to a specific network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] ip6_fib - make it per network namespaceDaniel Lezcano
The fib table for ipv6 are moved to the network namespace structure. All references to them are made relatively to the network namespace. All external calls to the ip6_fib functions taking the network namespace parameter are made using the init_net variable, so the ip6_fib engine is ready for the namespaces but the callers not yet. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[IPV6]: Make ndisc_dst_alloc() common for later use.YOSHIFUJI Hideaki
For later use, this patch is renaming ndisc_dst_alloc() (and related function/structures) to icmp6_dst_alloc() (and so on). This patch also removing unused function- pointer argument for it. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().YOSHIFUJI Hideaki
Since most users of ipv6_get_saddr() pass non-NULL as dst argument, use ipv6_dev_get_saddr() directly. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[IPV6] SYSCTL: complete initialization for sysctl table in subsystem code.YOSHIFUJI Hideaki
Move initialization bits for subsystem sysctl tables to appropriate functions. - route - icmp Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-02-26[IPV6]: Add missing initializations of the new nl_info.nl_net fieldBenjamin Thery
Add some more missing initializations of the new nl_info.nl_net field in IPv6 stack. This field will be used when network namespaces are fully supported. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09[IPV6]: Replace using the magic constant "1024" with IP6_RT_PRIO_USER for ↵Rami Rosen
fc_metric. This patch replaces the explicit usage of the magic constant "1024" with IP6_RT_PRIO_USER in the IPV6 tree. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[IPV6]: Update MSS even if MTU is unchanged.Jim Paris
This is needed because in ndisc.c, we have: static void ndisc_router_discovery(struct sk_buff *skb) { // ... if (ndopts.nd_opts_mtu) { // ... if (rt) rt->u.dst.metrics[RTAX_MTU-1] = mtu; rt6_mtu_change(skb->dev, mtu); // ... } Since the mtu is set directly here, rt6_mtu_change_route thinks that it is unchanged, and so it fails to update the MSS accordingly. This patch lets rt6_mtu_change_route still update MSS if old_mtu == new_mtu. Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[NET]: should explicitely initialize atomic_t field in struct dst_opsEric Dumazet
All but one struct dst_ops static initializations miss explicit initialization of entries field. As this field is atomic_t, we should use ATOMIC_INIT(0), and not rely on atomic_t implementation. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[NETNS]: Add missing initialization of nl_info.nl_net in rtm_to_fib6_config()Benjamin Thery
Add missing initialization of the new nl_info.nl_net field in rtm_to_fib6_config(). This will be needed the store network namespace associated to the fib6_config struct. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS][DST] dst: pass the dst_ops as parameter to the gc functionsDaniel Lezcano
The garbage collection function receive the dst_ops structure as parameter. This is useful for the next incoming patchset because it will need the dst_ops (there will be several instances) and the network namespace pointer (contained in the dst_ops). The protocols which do not take care of the namespaces will not be impacted by this change (expect for the function signature), they do just ignore the parameter. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6] route: kill some bloatIlpo Järvinen
net/ipv6/route.c: ip6_pkt_prohibit_out | -130 ip6_pkt_discard | -261 ip6_pkt_discard_out | -130 ip6_pkt_prohibit | -261 4 functions changed, 782 bytes removed, diff: -782 net/ipv6/route.c: ip6_pkt_drop | +300 1 function changed, 300 bytes added, diff: +300 net/ipv6/route.o: 5 functions changed, 300 bytes added, 782 bytes removed, diff: -482 Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add netns to nl_info structure.Denis V. Lunev
nl_info is used to track the end-user destination of routing change notification. This is a natural object to hold a namespace on. Place it there and utilize the context in the appropriate places. Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>