aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211/cfg.c
AgeCommit message (Collapse)Author
2008-04-16mac80211: allow WDS modeJohannes Berg
This allows creating interfaces in WDS mode or switching existing ones into WDS mode (both via cfg80211 and wext.) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16mac80211: further RCU fixesJohannes Berg
There were a few more instances of sta_info_get calls not being protected by RCU, fix them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: rename filesJohannes Berg
This patch renames all mac80211 files (except ieee80211_i.h) to get rid of the useless ieee80211_ prefix. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08mac80211: fix key vs. sta locking problemsJohannes Berg
Up to now, key manipulation is supposed to run under RTNL to avoid concurrent manipulations and also allow the set_key() hardware callback to sleep. This is not feasible because STA structs are rcu-protected and thus a lot of operations there cannot take the RTNL. Also, key references are rcu-protected so we cannot do things atomically. This patch changes key locking completely: * key operations are now atomic * hardware crypto offload is enabled and disabled from a workqueue, due to that key freeing is also delayed * debugfs code is also run from a workqueue * keys reference STAs (and vice versa!) so during STA unlink the STAs key reference is removed but not the keys STA reference, to avoid races key todo work is run before STA destruction. * fewer STA operations now need the RTNL which was required due to key operations This fixes the locking problems lockdep pointed out and also makes things more light-weight because the rtnl isn't required as much. Note that the key todo lock/key mutex are global locks, this is not required, of course, they could be per-hardware instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-01mac80211: clean up sta_info_destroy() users wrt. RCU/lockingJohannes Berg
Calling sta_info_destroy() doesn't require RCU-synchronisation before-hand because it does that internally. However, it does require rtnl-locking so insert that where necessary. Also clean up the code doing it internally to be a bit clearer and not synchronize twice if keys are configured. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-01mac80211: automatically free sta struct when insertion failsJohannes Berg
When STA structure insertion fails, it has been allocated but isn't really alive yet, it isn't reachable by any other code and also can't yet have much configured. This patch changes the code so that when the insertion fails, the resulting STA pointer is no longer valid because it is freed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: always force mesh_path deletionsLuis Carlos Cobo
Postponing the deletion is not really useful anymore. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: fix sta_info mesh timer bugJohannes Berg
I noticed a bug I introduced when mesh is enabled: sta_info_destroy() will end up calling cancel_timer() on a timer that has never been initialized because the timer is only initialized in mesh_plink_alloc(), not in sta_info_alloc(). This patch moves the initialization of all mesh related fields into sta_info_alloc(), adds a bit of sanity checking to the cfg80211 handlers and sta_info_insert() and makes mesh_plink_alloc() a static helper function that is only used from the mesh plink code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: split sta_info_addJohannes Berg
sta_info_add() has two functions: allocating a station info structure and inserting it into the hash table/list. Splitting these two functions allows allocating with GFP_KERNEL in many places instead of GFP_ATOMIC which is now required by the RCU protection. Additionally, in many places RCU protection is now no longer needed at all because between sta_info_alloc() and sta_info_insert() the caller owns the structure. This fixes a few race conditions with setting initial flags and similar, but not all (see comments in ieee80211_sta.c and cfg.c). More documentation on the existing races will be in a follow-up patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: RCU-ify STA info structure accessJohannes Berg
This makes access to the STA hash table/list use RCU to protect against freeing of items. However, it's not a true RCU, the copy step is missing: whenever somebody changes a STA item it is simply updated. This is an existing race condition that is now somewhat understandable. This patch also fixes the race key freeing vs. STA destruction by making sure that sta_info_destroy() is always called under RTNL and frees the key. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: clean up mesh codeJohannes Berg
Various cleanups, reducing the #ifdef mess and other things. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: mesh path and mesh peer configurationLuis Carlos Cobo
This adds code to allow adding mesh interfaces and configuring mesh peers etc. Also, it adds code for station dumping. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: mesh data structures and first mesh changesLuis Carlos Cobo
Includes integration in struct sta_info of mesh peer link elements, previously on their own mesh peer link table. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06nl80211/cfg80211: support for mesh, sta dumpingLuis Carlos Cobo
Added support for mesh id and mesh path operation as well as station structure dumping. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: split ieee80211_key_alloc/freeJohannes Berg
In order to RCU-ify sta_info, we need to be able to allocate a key without linking it to an sdata/sta structure (because allocation cannot be done in an rcu critical section). This patch splits up ieee80211_key_alloc() and updates all users appropriately. While at it, this patch fixes a number of race conditions such as finally making key replacement atomic, unfortunately at the expense of more complex code. Note that this patch documents /existing/ bugs with sta info and key interaction, there is currently a race condition when a sta info is freed without holding the RTNL. This will finally be fixed by a followup patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: atomically check whether STA exists alreadyJohannes Berg
When a STA structure is added, it is often checked whether it already exists before adding it. This, however, isn't done atomically so there is a race condition that could lead to two STA structures being added with the same MAC address. This patch changes sta_info_add() to return an ERR_PTR in case of failure and adds the failure mode -EEXIST when the STA already exists. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: Use monitor configuration flagsMichael Wu
Take advantage of the monitor configuration flags now provided by cfg80211. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29nl80211: Add monitor interface configuration flagsMichael Wu
This allows precise control over what a monitor interface shows. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29cfg80211 API for channels/bitrates, mac80211 and driver conversionJohannes Berg
This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: implement cfg80211 station handlingJohannes Berg
This implements station handling from userspace via cfg80211 in mac80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: add beacon configuration via cfg80211Johannes Berg
This patch implements the cfg80211 hooks for configuring beaconing on an access point interface in mac80211. While doing so, it fixes a number of races that could badly crash the machine when the beacon is changed while being requested by the driver. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: move interface type to vif structureJohannes Berg
Drivers that support mixed AP/STA operation may well need to know the type of a virtual interface when iterating over them. The easiest way to support that is to move the interface type variable into the vif structure. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: implement station stats retrievalJohannes Berg
This implements the required cfg80211 callback in mac80211 to allow userspace to get station statistics. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28mac80211: support getting key sequence counters via cfg80211Johannes Berg
This implements cfg80211's get_key() to allow retrieving the sequence counter for a TKIP or CCMP key from userspace. It also cleans up and documents the associated low-level driver interface. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28mac80211: support adding/removing keys via cfg80211Johannes Berg
This adds the necessary hooks to mac80211 to allow userspace to edit keys with cfg80211 (through nl80211.) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: implement cfg80211's change_interface hookJohannes Berg
This implements the cfg80211 change_interface hook that changes the type of an interface and cleans up the code a bit. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: rename ieee80211_cfg.h to cfg.hMichael Wu
Might as well rename ieee80211_cfg.h to cfg.h to keep things consistent. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: rename ieee80211_cfg.c to cfg.cJohannes Berg
It's just painful to have the extra ieee80211_ prefix. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>