aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211/wep.c
AgeCommit message (Collapse)Author
2009-07-24cfg80211: rework key operationJohannes Berg
This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10mac80211: refactor the WEP code to be directly usableJohannes Berg
The new key work for cfg80211 will only give us the WEP key for shared auth to do that authentication, and not via the regular key settings, so we need to be able to encrypt a single frame in software, and that without a key struct. Thus, refactor the WEP code to not require a key structure but use the key, len and idx directly. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: rewrite fragmentationJohannes Berg
Fragmentation currently uses an allocated array to store the fragment skbs, and then keeps track of which have been sent and which are still pending etc. This is rather complicated; make it simpler by just chaining the fragments into skb->next and removing from that list when sent. Also simplifies all code that needs to touch fragments, since it now only needs to walk the skb->next list. This is a prerequisite for fixing the stored packet code, which I need to do for proper aggregation packet storing. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26mac80211: fix unaligned access in ieee80211_wep_encrypt_dataIvan Kuten
Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: minor code cleanupsJohannes Berg
Nothing very interesting, some checkpatch inspired stuff, some other things. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-06mac80211: free up 2 bytes in skb->cbFelix Fietkau
Free up 2 bytes in skb->cb to be used for multi-rate retry later. Move iv_len and icv_len initialization into key alloc. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22mac80211: use ieee80211 frame control directlyHarvey Harrison
Remove the last users of the rx/tx_data->fc data members and use the le16 frame_control from the header directly. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-22mac80211: wep.c replace magic numbers in IV/ICV removalHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: return correct error return from ieee80211_wep_initJeremy Fitzhardinge
Return the proper error code rather than a hard-coded ENOMEM from ieee80211_wep_init. Also, print the error code on failure. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-02mac80211: rework debug settings and make debugging saferJohannes Berg
This patch reworks the mac80211 debug settings making them more focused and adding help text for those that didn't have one. It also removes a number of printks that can be triggered remotely and add no value, e.g. "too short deauthentication frame received - ignoring". If somebody really needs to debug that they should just add a monitor interface and look at the frames in wireshark. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27mac80211: wep.c use new frame control helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03mac80211: fix panic when using hardware WEPPavel Roskin
e039fa4a4195ac4ee895e6f3d1334beed63256fe ("mac80211: move TX info into skb->cb") misplaced code for setting hardware WEP keys. Move it back. This fixes kernel panic in b43 if WEP is used and hardware encryption is enabled. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-03mac80211: clean up skb reallocation codeJohannes Berg
This cleans up the skb reallocation code to avoid problems with skb->truesize, not resize an skb twice for a single output path because we didn't expand it enough during the first copy and also removes the code to further expand it during crypto operations which will no longer be necessary. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-21mac80211: move TX info into skb->cbJohannes Berg
This patch converts mac80211 and all drivers to have transmit information and status in skb->cb rather than allocating extra memory for it and copying all the data around. To make it fit, a union is used where only data that is necessary for all steps is kept outside of the union. A number of fixes were done by Ivo, as well as the rt2x00 part of this patch. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-07mac80211: Replace ieee80211_tx_control->key_idx with ieee80211_key_confIvo van Doorn
The hw_key_idx inside the ieee80211_key_conf structure does not provide all the information drivers might need to perform hardware encryption. This is in particular true for rt2x00 who needs to know the key algorithm and whether it is a shared or pairwise key. By passing the ieee80211_key_conf pointer it assures us that drivers can make full use of all information that it should know about a particular key. Additionally this patch updates all drivers to grab the hw_key_idx from the ieee80211_key_conf structure. v2: Removed bogus u16 cast v3: Add warning about ieee80211_tx_control pointers v4: Update warning about ieee80211_tx_control pointers Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: split ieee80211_txrx_dataJohannes Berg
Split it into ieee80211_tx_data and ieee80211_rx_data to clarify usage/flag usage and remove the stupid union thing. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: split RX_DROPJohannes Berg
Some instances of RX_DROP mean that the frame was useless, others mean that the frame should be visible in userspace on "cooked" monitor interfaces. This patch splits up RX_DROP and changes each instance appropriately. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29mac80211: split ieee80211_txrx_resultJohannes Berg
The _DROP result will need to be split in the RX path but not in the TX path, so for preparation split up the type into two types, one for RX and one for TX. Also make sure (via sparse) that they cannot be confused. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: move tx crypto decisionJohannes Berg
This patch moves the decision making about whether a frame is encrypted with a certain algorithm up into the TX handlers rather than having it in the crypto algorithm implementation. This fixes a problem with the radiotap injection code where injecting a non-data packet and requesting encryption could end up asking the driver to encrypt a packet without giving it a key. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-29mac80211: rate limit wep decrypt failed messagesAdel Gadllah
The attached patch rate limits "WEP decrypt failed (ICV)" to avoid flooding the logfiles. Signed-off-by: Adel Gadllah <adel.gadllah@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10mac80211: make "decrypt failed" messages conditional upon MAC80211_DEBUGJohn W. Linville
Make "decrypt failed" and "have no key" debugging messages compile conditionally upon CONFIG_MAC80211_DEBUG. They have been useful for finding certain problems in the past, but in many cases they just clutter a user's logs. A typical example is an enviornment where multiple SSIDs are using a single BSSID but with different protection schemes or different keys for each SSID. In such an environment these messages are just noise. Let's just leave them for those interested enough to turn-on debugging. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-23[PATCH] Fix breakage after SG cleanupsRalf Baechle
Commits 58b053e4ce9d2fc3023645c1b96e537c72aa8d9a ("Update arch/ to use sg helpers") 45711f1af6eff1a6d010703b4862e0d2b9afd056 ("[SG] Update drivers to use sg helpers") fa05f1286be25a8ce915c5dd492aea61126b3f33 ("Update net/ to use sg helpers") converted many files to use the scatter gather helpers without ensuring that the necessary headerfile <linux/scatterlist> is included. This happened to work for ia64, powerpc, sparc64 and x86 because they happened to drag in that file via their <asm/dma-mapping.h>. On most of the others this probably broke. Instead of increasing the header file spider web I choose to include <linux/scatterlist.h> directly into the affectes files. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22Update net/ to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-10[PATCH] mac80211: remove ieee80211_wep_get_keyidxJohannes Berg
This function is not used any more. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: consolidate encryptionJohannes Berg
Currently we run through all crypto handlers for each transmitted frame although we already know which one will be used. This changes the code to invoke only the needed handler. It also moves the wep code into wep.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: consolidate decryptionJohannes Berg
Currently, we run through all three crypto algorithms for each received frame even though we have previously determined which key we have and as such already know which algorithm will be used. Change it to invoke only the needed function. Also move the WEP decrypt handler to wep.c so that fewer functions need to be non-static. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[MAC80211]: embed key conf in key, fix driver interfaceJohannes Berg
This patch embeds the struct ieee80211_key_conf into struct ieee80211_key and thus avoids allocations and having data present twice. This required some more changes: 1) The removal of the IEEE80211_KEY_DEFAULT_TX_KEY key flag. This flag isn't used by drivers nor should it be since we have a set_key_idx() callback. Maybe that callback needs to be extended to include the key conf, but only a driver that requires it will tell. 2) The removal of the IEEE80211_KEY_DEFAULT_WEP_ONLY key flag. This flag is global, so it shouldn't be passed in the key conf structure. Pass it to the function instead. Also, this patch removes the AID parameter to the set_key() callback because it is currently unused and the hardware currently cannot know about the AID anyway. I suspect this was used with some hardware that actually selected the AID itself, but that functionality was removed. Additionally, I've removed the ALG_NULL key algorithm since we have ALG_NONE. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-05[MAC80211]: Add mac80211 wireless stack.Jiri Benc
Add mac80211, the IEEE 802.11 software MAC layer. Signed-off-by: Jiri Benc <jbenc@suse.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>