aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2008-07-29mac80211: fix mesh beaconingLuis Carlos Cobo
This patch fixes mesh beaconing, which was broken by "mac80211: revamp beacon configuration". Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: fix cfg80211 hooks for master interfaceJohannes Berg
The master interface is a virtual interface that is registered to mac80211, changing that does not seem like a good idea at the moment. However, since it has no sdata, we cannot accept any configuration for it. This patch makes the cfg80211 hooks reject any such attempt. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: partially fix skb->cb useJohannes Berg
This patch fixes mac80211 to not use the skb->cb over the queue step from virtual interfaces to the master. The patch also, for now, disables aggregation because that would still require requeuing, will fix that in a separate patch. There are two other places (software requeue and powersaving stations) where requeue can happen, but that is not currently used by any drivers/not possible to use respectively. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: append CONFIG_ to MAC80211_VERBOSE_PS_DEBUG in net/mac80211/tx.c.Rami Rosen
In net/mac80211/tx.c, there are some #ifdef which checks MAC80211_VERBOSE_PS_DEBUG (which in fact is never set) instead of CONFIG_MAC80211_VERBOSE_PS_DEBUG, as should be. This patch replaces MAC80211_VERBOSE_PS_DEBUG with CONFIG_MAC80211_VERBOSE_PS_DEBUG in these #ifdef commands in net/mac80211/tx.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: return correct error return from ieee80211_wep_initJeremy Fitzhardinge
Return the proper error code rather than a hard-coded ENOMEM from ieee80211_wep_init. Also, print the error code on failure. Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: tx, use dev_kfree_skb_any for beacon_getJiri Slaby
Use dev_kfree_skb_any(); instead of dev_kfree_skb();, since ieee80211_beacon_get function might be called from atomic. (It's in a fail path.) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-20net_sched: Add qdisc_enqueue wrapperJussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17pkt_sched: Kill netdev_queue lock.David S. Miller
We can simply use the qdisc->q.lock for all of the qdisc tree synchronization. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17mac80211: Reimplement WME using ->select_queue().David S. Miller
The only behavior change is that we do not drop packets under any circumstances. If that is absolutely needed, we could easily add it back. With cleanups and help from Johannes Berg. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17mac80211: Temporarily mark QoS support BROKEN.David S. Miller
We will undo this after a few changsets. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17netdev: Kill NETIF_F_MULTI_QUEUE.David S. Miller
There is no need for a feature bit for something that can be tested by simply checking the TX queue count. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17netdev: Allocate multiple queues for TX.David S. Miller
alloc_netdev_mq() now allocates an array of netdev_queue structures for TX, based upon the queue_count argument. Furthermore, all accesses to the TX queues are now vectored through the netdev_get_tx_queue() and netdev_for_each_tx_queue() interfaces. This makes it easy to grep the tree for all things that want to get to a TX queue of a net device. Problem spots which are not really multiqueue aware yet, and only work with one queue, can easily be spotted by grepping for all netdev_get_tx_queue() calls that pass in a zero index. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15netdev: Do not use TX lock to protect address lists.David S. Miller
Now that we have a specific lock to protect the network device unicast and multicast lists, remove extraneous grabs of the TX lock in cases where the code only needs address list protection. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-15netdev: Add netdev->addr_list_lock protection.David S. Miller
Add netif_addr_{lock,unlock}{,_bh}() helpers. Use them to protect operations that operate on or read the network device unicast and multicast address lists. Also use them in cases where the code simply wants to block calls into the driver's ->set_rx_mode() and ->set_multicast_list() methods. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-07-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/netfilter/nf_conntrack_proto_tcp.c
2008-07-14mac80211: dont add a STA which is not in the same IBSSEmmanuel Grumbach
This patch avoids adding STAs that don't belong to our IBSS ieee80211_bssid_match matches also bcast address so also APs were added Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix struct ieee80211_tx_queue_paramsJohannes Berg
Multiple issues: - there are no "default" values needed - cw_min/cw_max can be larger than documented - restructure to decrease size - use get_unaligned_le16 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix TX sequence numbersJohannes Berg
This patch makes mac80211 assign proper sequence numbers to QoS-data frames. It also removes the old sequence number code because we noticed that only the driver or hardware can assign sequence numbers to non-QoS-data and especially management frames in a race-free manner because beacons aren't passed through mac80211's TX path. This patch also adds temporary code to the rt2x00 drivers to not break them completely, that code will have to be reworked for proper sequence numbers on beacons. It also moves sequence number assignment down in the TX path so no sequence numbers are assigned to frames that are dropped. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix RX sequence number checkJohannes Berg
According to 802.11-2007, we are doing the wrong thing in the sequence number checks when receiving frames. This fixes it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: Fix ieee80211_rx_reorder_ampdu: ignore QoS null packetsEmmanuel Grumbach
This patch fixes the check at the entrance to ieee80211_rx_reorder_ampdu. This check has been broken by 'mac80211: rx.c use new helpers'. Letting QoS NULL packet in ieee80211_rx_reorder_ampdu led to packet loss in RX. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: revamp beacon configurationJohannes Berg
This patch changes mac80211's beacon configuration handling to never pass skbs to the driver directly but rather always require the driver to use ieee80211_beacon_get(). Additionally, it introduces "change flags" on the config_interface() call to enable drivers to figure out what is changing. Finally, it removes the beacon_update() driver callback in favour of having IBSS beacon delivered by ieee80211_beacon_get() as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: push interface checks downJohannes Berg
This patch pushes the "netif_running()" and "same type as before" checks down into ieee80211_if_change_type() to centralise the logic instead of duplicating it for cfg80211 and wext. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: revamp virtual interface handlingJohannes Berg
This patch revamps the virtual interface handling and makes the code much easier to follow. Fewer functions, better names, less spaghetti code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: make master netdev handling saneJohannes Berg
Currently, almost every interface type has a 'bss' pointer pointing to BSS information. This BSS information, however, is for a _local_ BSS, not for the BSS we joined, so having it on a STA mode interface makes little sense, but now they have it pointing to the master device, which is an AP mode virtual interface. However, except for some bitrate control data, this pointer is only used in AP/VLAN modes (for power saving stations.) Overall, it is not necessary to even have the master netdev be a valid virtual interface, and it doesn't have to be on the list of interfaces either. This patch changes the master netdev to be special, it now - no longer is on the list of virtual interfaces, which lets me remove a lot of tests for that - no longer has sub_if_data attached, since that isn't used Additionally, this patch changes some vlan/ap mode handling that is related to these 'bss' pointers described above (but in the VLAN case they actually make sense because there they point to the AP they belong to); it also adds some debugging code to IEEE80211_DEV_TO_SUB_IF to validate it is not called on the master netdev any more. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: power management wext hooksSamuel Ortiz
This patch implements the power management routines wireless extensions for mac80211. For now we only support switching PS mode between on and off. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-09rc80211_pid: Fix fast_start parameter handlingMattias Nissler
This removes the fast_start parameter from the rc_pid parameters information and instead uses the parameter macro when initializing the rc_pid state. Since the parameter is only used on initialization, there is no point of making exporting it via debugfs. This also fixes uninitialized memory references to the fast_start and norm_offset parameters detected by the kmemcheck utility. Thanks to Vegard Nossum for reporting the bug. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08net: Delete NETDEVICES_MULTIQUEUE kconfig option.David S. Miller
Multiple TX queue support is a core networking feature. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Make netif_schedule() routines work with netdev_queue objects.David S. Miller
Only plain netif_schedule() remains taking a net_device, mostly as a compatability item while we transition the rest of these interfaces. Everything else calls netif_schedule_queue() or __netif_schedule(), both of which take a netdev_queue pointer. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08mac80211: Decrease number of explicit ->tx_queue references.David S. Miller
Accomplish this by using local variables. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move rest of qdisc state into struct netdev_queueDavid S. Miller
Now qdisc, qdisc_sleeping, and qdisc_list also live there. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move queue_lock into struct netdev_queue.David S. Miller
The lock is now an attribute of the device queue. One thing to notice is that "suspicious" places emerge which will need specific training about multiple queue handling. They are so marked with explicit "netdev->rx_queue" and "netdev->tx_queue" references. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Remove 'dev' member of struct Qdisc.David S. Miller
It can be obtained via the netdev_queue. So create a helper routine, qdisc_dev(), to make the transformations nicer looking. Now, qdisc_alloc() now no longer needs a net_device pointer argument. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Create netdev_queue abstraction.David S. Miller
A netdev_queue is an entity managed by a qdisc. Currently there is one RX and one TX queue, and a netdev_queue merely contains a backpointer to the net_device. The Qdisc struct is augmented with a netdev_queue pointer as well. Eventually the 'dev' Qdisc member will go away and we will have the resulting hierarchy: net_device --> netdev_queue --> Qdisc Also, qdisc_alloc() and qdisc_create_dflt() now take a netdev_queue pointer argument. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.c net/mac80211/mlme.c
2008-07-08mac80211: fix lots of kernel-docRandy Dunlap
Fix more than 50 kernel-doc warnings in ieee80211/mac80211 kernel-doc notation. Fix a few typos also. Note: Some fields are marked as TBD and need to have their description corrected. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: add support for iwconfig wlanX frag autoEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: aes_ccm.c remove crypto wrapper and extra argsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: pass scratch buffer directly, remove additional pointersHarvey Harrison
Recalculate the offset pointers in the ccmp calculations rather than in the callers. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: wpa.c remove rx/tx_data ->fc usersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: remove trivial rx_data->fc usersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: call bss_info_change only once upon disassociationTomas Winkler
This patch removes call of ieee80211_bss_info_change_notify from within ieee80211_reset_erp_info. This allows gathering all bss info changes into one call to the driver in the disassociation flow. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: remove ieee80211_get_hdr_infoHarvey Harrison
Do the check for sufficient skb->len explicitly and pass a pointer to the struct ieee80211_hdr directly to the michael_mic calculation. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: remove one user of ieee80211_get_hdr_infoHarvey Harrison
ccmp_special_blocks was only using it to calculate data_len, calculate that directly. Use unaligned helpers rather than masking/shifting. Use symbolic constants for the masked frame_control, and do it directly on a le16 value. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: use symbolic defines in wpa.cHarvey Harrison
ETH_ALEN and IEEE80211_QOS_CTL_LEN Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: move QOS control helpers into ieee80211.hHarvey Harrison
Also remove the WLAN_IS_QOS_DATA inline after removing the last two users. This starts moving away from using rx->fc to using the header frame_control directly. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: remove MAC80211_DEBUG from net/mac80211/Kconfig.Rami Rosen
This patch removes MAC80211_DEBUG from /net/mac80211/Kconfig (in MAC80211_DEBUG_COUNTERS config entry), and replaces MAC80211_DEBUG_MENU instead of MAC80211_DEBUG (in MAC80211_VERBOSE_SPECT_MGMT_DEBUG config entry). Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: fix warning: unused variable ifstaTomas Winkler
This patch fixes warning unused variable ifsta when compiling without CONFIG_MAC80211_VERBOSE_DEBUG Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: remove useless tid assignment for management and control framesTomas Winkler
This patch removes useless tid assignment for management and control frames Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: add block ack request capabilityRon Rindjunsky
This patch adds block ack request capability Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 06:51:02 +0000