aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2008-12-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-sta.c
2008-12-05mac80211: tx module cleanup.Rami Rosen
This patch removes unnecessary parameter in ieee80211_beacon_add_tim() and removes unneeded definition and assignment for bdev (instance of net_device) in ieee80211_beacon_get() and in ieee80211_get_buffered_bc() (all in tx.c). Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: add sta_notify_ps callbackChristian Lamparter
This patch is necessary in order to provide a proper Access point support for p54. Unfortunately for us, there is no documented way to disable the interfering power save buffering mechanism in firmware completely. Therefore we give in and notify the driver through our new sta_notify_ps callback, so that we can update the filter state. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: accept empty strings for hidden SSIDsFabio Rossi
Some access points (e.g. Sitecom WL-174) use an empty string as hidden SSID. Signed-off-by: Fabio Rossi <rossi.f@inwind.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05cfg80211: handle SIOCGIWMODE/SIOCSIWMODEJohannes Berg
further reducing wext code in mac80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05cfg80211: handle SIOCGIWNAMEJohannes Berg
This patch moves the SIOCGIWNAME handling from mac80211 to cfg80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05nl80211: Add frequency configuration (including HT40)Jouni Malinen
This patch adds new NL80211_CMD_SET_WIPHY attributes NL80211_ATTR_WIPHY_FREQ and NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to allow userspace to set the operating channel (e.g., hostapd for AP mode). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: only transition STAs ps->wake on data framesJohannes Berg
When a station goes to PS mode to scan, it will then send probe requests without the PS bit set. mac80211 will take that as indication that the station woke up, but it didn't. This patch changes mac80211 to only consider doze->wake transitions on data frames to to fix that issue. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: disassociate prior to unlinking AP/stationTomas Winkler
This patch reorders calls during disassociation in ieee80211_set_disassoc function. Since sta_info_unlink calls sta_notify(REMOVE) it will remove the station representing AP from the driver before it has disassociated from it using bss_info_changed callback. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: deauth when interface is marked downJohn W. Linville
It seems like proper etiquette to let other stations know when we are going down in either STA or IBSS mode. This also notifies userland, so wpa_supplicant doesn't get confused. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: use unaligned safe memcmp() in-place of compare_ether_addr()Shaddy Baddah
After fixing zd1211rw: use unaligned safe memcmp() in-place of compare_ether_addr(), I started to see kernel log messages detailing unaligned access: Kernel unaligned access at TPC[100f7f44] sta_info_get+0x24/0x68 [mac80211] As with the aforementioned patch, the unaligned access was eminating from a compare_ether_addr() call. Concerned that whilst it was safe to assume that unalignment was the norm for the zd1211rw, and take preventative measures, it may not be the case or acceptable to use the easy fix of changing the call to memcmp(). My research however indicated that it was OK to do this, as there are a few instances where memcmp() is the preferred mechanism for doing mac address comparisons throughout the module. Signed-off-by: Shaddy Baddah <shaddy_baddah@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/hp-plus.c drivers/net/wireless/ath5k/base.c drivers/net/wireless/ath9k/recv.c net/wireless/reg.c
2008-11-26mac80211: fix unaligned access in ieee80211_wep_encrypt_dataIvan Kuten
Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26mac80211: Look out for some other AP when disassoc is received.Vivek Natarajan
When a disassoc packet is received from the AP with a reason code of 'leaving the BSS', mac80211 should go into DISABLED state just as it would do if the AP suddenly went away for some reason, as that is what will happen shortly after the AP leaves anyway. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26mac80211: Fix pid rate-setting algorithm to allow rate changesLarry Finger
In commit 9ea2c74 named "mac80211/drivers: rewrite the rate control API", the meaning of status.rates[i].count was changed from number of retries to total number of tries. As a result, the pid rate-setting algorithm fails because every packet appears to have needed a retransmit. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26mac80211: make Minstrel the default rate control algorithmLuis R. Rodriguez
This makes minstrel the default rate control algorithm for mac80211. For more information see: http://wireless.kernel.org/en/developers/Documentation/mac80211/RateControl/minstrel If someone can come up with a better algorithm they get a prize (undisclosed). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25mac80211: don't assume driver has been attached on registrationLuis R. Rodriguez
mac80211's ieee80211_register_hw() is often called within the probe path so it cannot assume the device's driver structure has been attached yet so to create a workqueue instead of using driver->name use the wiphy's phy%d name. The name doesn't really matter anyway. This should fix sporadic oopses found when we race to beat the driver pointer setting. Not even sure how this was working properly. http://www.kerneloops.org/search.php?search=ieee80211_register_hw Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25mac80211: Use the HT capabilities from the IE instead of the station's caps.Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25cfg80211/mac80211: Add 802.11d supportLuis R. Rodriguez
This adds country IE parsing to mac80211 and enables its usage within the new regulatory infrastructure in cfg80211. We parse the country IEs only on management beacons for the BSSID you are associated to and disregard the IEs when the country and environment (indoor, outdoor, any) matches the already processed country IE. To avoid following misinformed or outdated APs we build and use a regulatory domain out of the intersection between what the AP provides us on the country IE and what CRDA is aware is allowed on the same country. A secondary device is allowed to follow only the same country IE as it make no sense for two devices on a system to be in two different countries. In the case the AP is using country IEs for an incorrect country the user may help compliance further by setting the regulatory domain before or after the IE is parsed and in that case another intersection will be performed. CONFIG_WIRELESS_OLD_REGULATORY is supported but requires CRDA present. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25mac80211 : Fix setting ad-hoc mode and non-ibss channelAbhijeet Kolekar
Patch fixes the kernel trace when user tries to set ad-hoc mode on non IBSS channel. e.g iwconfig wlan0 chan 36 mode ad-hoc Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21net: remove redundant argument commentsQinghuang Feng
Remove redundant argument comments in files of net/* Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21mac80211: remove unnecessary include.Rami Rosen
This patch removes unnecessary #include <linux/netdevice.h> from /net/mac80211/mlme.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21mac80211: rc80211_pid eliminate sparse warningsTomas Winkler
This patch eliminates sparse warnings in pid rate scale algorithm 'debugfs: allow access to signed values' patch hit the dead end year ago w/o much echo so I guess there is no real need to address this properly. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21mac80211: remove more excess kernel-docRandy Dunlap
Delete kernel-doc struct descriptions for fields that don't exist: Warning(include/net/mac80211.h:1263): Excess struct/union/enum/typedef member 'conf_ht' description in 'ieee80211_ops' Warning(net/mac80211/sta_info.h:309): Excess struct/union/enum/typedef member 'addr' description in 'sta_info' Warning(net/mac80211/sta_info.h:309): Excess struct/union/enum/typedef member 'aid' description in 'sta_info' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Johannes Berg <johannes@sipsolutions.net> cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21mac80211: disable BSSID filtering for mesh interfacesAndrey Yurovsky
Mesh interfaces are currently opened with the FIF_ALLMULTI rx filter flag set, however there is no BSSID in mesh so BSSID filtering should be disabled by setting the FIF_OTHER_BSS flag as well. Also explicitly call ieee80211_configure_filter for mesh. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Javier Cardona <javier@cozbit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-20Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ixgbe/ixgbe_main.c include/net/mac80211.h net/phonet/af_phonet.c
2008-11-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/isdn/i4l/isdn_net.c fs/cifs/connect.c
2008-11-18mac80211: remove ieee80211_notify_macJohannes Berg
Before ieee80211_notify_mac() was added, it was presented with the use case of using it to tell mac80211 that the association may have been lost because the firmware crashed/reset. Since then, it has also been used by iwlwifi to (slightly) speed up re-association after resume, a workaround around the fact that mac80211 has no suspend/resume handling yet. It is also not used by any other drivers, so clearly it cannot be necessary for "good enough" suspend/resume. Unfortunately, the callback suffers from a severe problem: It only works for station mode. If suspend/resume happens while in IBSS or any other mode (but station), then the callback is pointless. Recently, it has created a number of locking issues, first because it required rtnl locking rather than RCU due to calling sleeping functions within the critical section, and now because it's called by iwlwifi from the mac80211 workqueue that may not use the rtnl because it is flushed under rtnl. (cf. http://bugzilla.kernel.org/show_bug.cgi?id=12046) I think, therefore, that we should take a step back, remove it entirely for now and add the small feature it provided properly. For suspend and resume we will need to introduce new hooks, and for the case where the firmware was reset the driver will probably simply just pretend it has done a suspend/resume cycle to get mac80211 to reprogram the hardware completely, not just try to connect to the current AP again in station mode. When doing so, we will need to take into account locking issues and possibly defer to schedule_work from within mac80211 for the resume operation, while the suspend operation must be done directly. Proper suspend/resume should also not necessarily try to reconnect to the current AP, the time spent in suspend may have been short enough to not be disconnected from the AP, mac80211 will detect that the AP went out of range quickly if it did, and if the association is lost then the AP will disassoc as soon as a data frame is sent. We might also take into account WWOL then, and have mac80211 program the hardware into such a mode where it is available and requested. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-12mac80211: fix notify_mac functionJohannes Berg
The ieee80211_notify_mac() function uses ieee80211_sta_req_auth() which in turn calls ieee80211_set_disassoc() which calls a few functions that need to be able to sleep, so ieee80211_notify_mac() cannot use RCU locking for the interface list and must use rtnl locking instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10mac80211: fix a buffer overrun in station debug codeJianjun Kong
net/mac80211/debugfs_sta.c The trailing zero was written to state[4], it's out of bounds. Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10mac80211: Allow AP mode to be enabledJouni Malinen
With the addition of basic rate set and TX queue parameter configuration and confirmation that power save buffering is working again, mac80211 is now in state that allows AP mode to be used without major problems. Consequently, it is time to allow this mode to be enabled without having to patch the kernel. AP mode requires hostapd for management frame processing and as such, configuring this mode is only allowed through cfg80211 (not with iwconfig and WEXT). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10mac80211: fix basic rates setting from association responseTomas Winkler
In previous code all the rates were marked as basic. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10nl80211: Add TX queue parameter configurationJouni Malinen
Add a new attribute, NL80211_ATTR_WIPHY_TXQ_PARAMS, that can be used with NL80211_CMD_SET_WIPHY for userspace (e.g., hostapd) to set TX queue parameters (txop, cwmin, cwmax, aifs). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10nl80211: Add basic rate configuration for AP modeJouni Malinen
Add a new attribute, NL80211_ATTR_BSS_BASIC_RATES, that can be used with NL80211_CMD_SET_BSS for userspace (e.g., hostapd) to set which rates are in the basic rate set. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10mac80211: Add a new event in ieee80211_ampdu_mlme_actionSujith
Send a notification to the driver on succesful reception of an ADDBA response, add IEEE80211_AMPDU_TX_RESUME for this purpose. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10mac80211: remove SSID driver codeJohannes Berg
Remove the SSID from the driver API since now there is no driver that requires knowing the SSID and I think it's unlikely that any hardware design that does require the SSID will play well with mac80211. This also removes support for setting the SSID in master mode which will require a patch to hostapd to not try. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10wireless: fix a few sparse warningsJohannes Berg
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10wireless: move mesh config length constantJohannes Berg
This is a constant from the 802.11 specification. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10mac80211: print reason code for deauth/dissoc framesZhu Yi
The patch prints reason code for deauth/dissoc frames to give users more ideas what's happened for the disconnection. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: fix two kernel-doc warningsJohannes Berg
One parameter wasn't described and one I forgot to update when renaming it; also update TBDs in sta_info. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: Re-enable aggregationSujith
Wireless HW without any dedicated queues for aggregation do not need the ampdu_queues mechanism present right now in mac80211. Since mac80211 is still incomplete wrt TX MQ changes, do not allow aggregation sessions for drivers that set ampdu_queues. This is only an interim hack until Intel fixes the requeue issue. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Luis Rodriguez <Luis.Rodriguez@Atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: allow all interfaces types to handle RX action framesAndrey Yurovsky
Eliminate the vif.type check in ieee80211_rx_h_action. This check is unnecessary (these action frames can be handled by all interface types) and currently prevents, for example, AP interfaces from handling BACK action frames such as ADDBA and DELBA requests. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: Change WARN_ON to WARN_ON_ONCESujith
A warning would be printed for every packet that is transmitted if the rate control information isn't setup. Change this to WARN_ON_ONCE. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: make use of regulatory tx power settings on change of tx powerLuis R. Rodriguez
We do not know what max power to allow until a device is targeting a channel, therefore only allow changing tx power if a channel is defined. Also make use of the channel's max power setting as defined by regulatory rules before allowing the user to use the requested power setting. If the user asked us to figure it out we use the max allowed by regulatory. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: check return value of dev_alloc_skb() in ieee80211_sta_join_ibss().Rami Rosen
This patch add a check on the return value of dev_alloc_skb() in ieee80211_sta_join_ibss() in net/mac80211/mlme.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: insert AP sta entry after filling itJohannes Berg
We never clearly defined the semantics of the sta_notify callback and it was originally posted for iwlwifi which still doesn't use it at all. With the recent HT rework ath9k started relying on it, but I made a mistake there in that I made ath9k assume the HT information has already been filled in at sta_notify time. This isn't a hard thing to do, so do it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31Add nl80211 commands to get and set o11s mesh networking parameterscolin@cozybit.com
The two new commands are NL80211_CMD_GET_MESH_PARAMS and NL80211_CMD_SET_MESH_PARAMS. There is a new attribute enum, NL80211_ATTR_MESH_PARAMS, which enumerates the various mesh configuration parameters. Moved struct mesh_config from mac80211/ieee80211_i.h to net/cfg80211.h. nl80211_get_mesh_params and nl80211_set_mesh_params unpack the netlink messages and ask the driver to get or set the configuration. This is done via two new function stubs, get_mesh_params and set_mesh_params, in struct cfg80211_ops. Signed-off-by: Colin McCabe <colin@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: inform userspace of probe/auth/assoc timeoutJohannes Berg
I noticed that when for some reason [1] the probe or auth times out, wpa_supplicant doesn't realise this and only tries the next AP when it runs into its own timeout, which is ten seconds, and that's quite long. Fix this by making mac80211 notify userspace that it didn't associate. [1] my wrt350n in mixed B/G/HT mode often runs into this, maybe it's because one of the antennas is broken off and for whatever reason it decides to use that antenna to transmit the response frames (auth, probe); I do see beacons fine so it's not totally broken. Works fine in pure-G mode. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: remove rate_control_clearJohannes Berg
"Clearing" the rate control algorithm is pointless, none of the algorithms actually uses this operation and it's not even invoked properly for all channel switching. Also, there's no need to since rate control algorithms work per station. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31minstrel: improve performance for non-MRR driversFelix Fietkau
This patch enhances minstrel's performance for non-MRR setups, by preventing it from sampling slower rates with >95% success probability and by putting at least 1 non-sample frame between several sample frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>