aboutsummaryrefslogtreecommitdiff
path: root/net/sunrpc/xprt.c
AgeCommit message (Collapse)Author
2006-01-06SUNRPC: Clean up xprt_destroy()Trond Myklebust
We ought never to be calling xprt_destroy() if there are still active rpc_tasks. Optimise away the broken code that attempts to "fix" that case. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06SUNRPC: Ensure client closes the socket when server initiates a closeTrond Myklebust
If the server decides to close the RPC socket, we currently don't actually respond until either another RPC call is scheduled, or until xprt_autoclose() gets called by the socket expiry timer (which may be up to 5 minutes later). This patch ensures that xprt_autoclose() is called much sooner if the server closes the socket. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06SUNRPC: switchable buffer allocationChuck Lever
Add RPC client transport switch support for replacing buffer management on a per-transport basis. In the current IPv4 socket transport implementation, RPC buffers are allocated as needed for each RPC message that is sent. Some transport implementations may choose to use pre-allocated buffers for encoding, sending, receiving, and unmarshalling RPC messages, however. For transports capable of direct data placement, the buffers can be carved out of a pre-registered area of memory rather than from a slab cache. Test-plan: Millions of fsx operations. Performance characterization with "sio" and "iozone". Use oprofile and other tools to look for significant regression in CPU utilization. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18SUNRPC: Provide a callback to allow free pages allocated during xdr encodingJ. Bruce Fields
For privacy, we need to allocate pages to store the encrypted data (passed in pages can't be used without the risk of corrupting data in the page cache). So we need a way to free that memory after the request has been transmitted. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18RPC: allow call_encode() to delay transmission of an RPC call.Trond Myklebust
Currently, call_encode will cause the entire RPC call to abort if it returns an error. This is unnecessarily rigid, and gets in the way of attempts to allow the NFSv4 layer to order RPC calls that carry sequence ids. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: parametrize various transport connect timeoutsChuck Lever
Each transport implementation can now set unique bind, connect, reestablishment, and idle timeout values. These are variables, allowing the values to be modified dynamically. This permits exponential backoff of any of these values, for instance. As an example, we implement exponential backoff for the connection reestablishment timeout. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: clean up after nocong was removedChuck Lever
Clean-up: Move some macros that are specific to the Van Jacobson implementation into xprt.c. Get rid of the cong_wait field in rpc_xprt, which is no longer used. Get rid of xprt_clear_backlog. Test-plan: Compile with CONFIG_NFS enabled. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: add a release_rqst callout to the RPC transport switchChuck Lever
The final place where congestion control state is adjusted is in xprt_release, where each request is finally released. Add a callout there to allow transports to perform additional processing when a request is about to be released. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: add generic interface for adjusting the congestion windowChuck Lever
A new interface that allows transports to adjust their congestion window using the Van Jacobson implementation in xprt.c is provided. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: separate xprt_timer implementationsChuck Lever
Allow transports to hook the retransmit timer interrupt. Some transports calculate their congestion window here so that a retransmit timeout has immediate effect on the congestion window. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: expose API for serializing access to RPC transportsChuck Lever
The next method we abstract is the one that releases a transport, allowing another task to have access to the transport. Again, one generic version of this is provided for transports that don't need the RPC client to perform congestion control, and one version is for transports that can use the original Van Jacobson implementation in xprt.c. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: expose API for serializing access to RPC transportsChuck Lever
The next several patches introduce an API that allows transports to choose whether the RPC client provides congestion control or whether the transport itself provides it. The first method we abstract is the one that serializes access to the RPC transport to prevent the bytes from different requests from mingling together. This method provides proper request serialization and the opportunity to prevent new requests from being started because the transport is congested. The normal situation is for the transport to handle congestion control itself. Although NFS over UDP was first, it has been recognized after years of experience that having the transport provide congestion control is much better than doing it in the RPC client. Thus TCP, and probably every future transport implementation, will use the default method, xprt_lock_write, provided in xprt.c, which does not provide any kind of congestion control. UDP can continue using the xprt.c-provided Van Jacobson congestion avoidance implementation. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: add API to set transport-specific timeoutsChuck Lever
Prepare the way to remove the "xprt->nocong" variable by adding a callout to the RPC client transport switch API to handle setting RPC retransmit timeouts. Add a pair of generic helper functions that provide the ability to set a simple fixed timeout, or to set a timeout based on the state of a round- trip estimator. Test-plan: Use WAN simulation to cause sporadic bursty packet loss. Look for significant regression in performance or client stability. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: get rid of xprt->streamChuck Lever
Now we can fix up the last few places that use the "xprt->stream" variable, and get rid of it from the rpc_xprt structure. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: separate TCP and UDP write space callbacksChuck Lever
Split the socket write space callback function into a TCP version and UDP version, eliminating one dependence on the "xprt->stream" variable. Keep the common pieces of this path in xprt.c so other transports can use it too. Test-plan: Write-intensive workload on a single mount point. Version: Thu, 11 Aug 2005 16:07:51 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: client-side transport switch cleanupChuck Lever
Clean-up: change some comments to reflect the realities of the new RPC transport switch mechanism. Get rid of unused xprt_receive() prototype. Also, organize function prototypes in xprt.h by usage and scope. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:07:21 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: Add helper for waking tasks pending on a transportChuck Lever
Clean-up: remove only reference to xprt->pending from the socket transport implementation. This makes a cleaner interface for other transport implementations as well. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:06:52 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: rename the sockstate fieldChuck Lever
Clean-up: get rid of a name reference to sockets in the generic parts of the RPC client by renaming the sockstate field in the rpc_xprt structure. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:05:53 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: Rename xprt_lockChuck Lever
Clean-up: Replace the xprt_lock with something more aptly named. This lock single-threads the XID and request slot reservation process. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:05:26 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: Rename sock_lockChuck Lever
Clean-up: replace a name reference to sockets in the generic parts of the RPC client by renaming sock_lock in the rpc_xprt structure. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:05:00 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: transport switch function namingChuck Lever
Introduce block header comments and a function naming convention to the socket transport implementation. Provide a debug setting for transports that is separate from RPCDBG_XPRT. Eliminate xprt_default_timeout(). Provide block comments for exposed interfaces in xprt.c, and eliminate the useless obvious comments. Convert printk's to dprintk's. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:04:04 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: introduce client-side transport switchChuck Lever
Move the bulk of client-side socket-specific code into a separate source file, net/sunrpc/xprtsock.c. Test-plan: Millions of fsx operations. Performance characterization such as "sio" or "iozone". Destructive testing (unplugging the network temporarily, server reboots). Connectathon with v2, v3, and v4. Version: Thu, 11 Aug 2005 16:03:38 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: extract socket logic common to both client and serverChuck Lever
Clean-up: Move some code that is common to both RPC client- and server-side socket transports into its own source file, net/sunrpc/socklib.c. Test-plan: Compile kernel with CONFIG_NFS enabled. Millions of fsx operations over UDP, client and server. Connectathon over UDP. Version: Thu, 11 Aug 2005 16:03:09 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] NFS: use a constant value for TCP retransmit timeoutsChuck Lever
Implement a best practice: don't use exponential backoff when computing retransmit timeout values on TCP connections, but simply retransmit at regular intervals. This also fixes a bug introduced when xprt_reset_majortimeo() was added. Test-plan: Enable RPC debugging and watch timeout behavior on a NFS/TCP mount. Version: Thu, 11 Aug 2005 16:02:19 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: Report connection errors properly when mounting with "soft"Chuck Lever
Fix up xprt_connect_status: the soft timeout logic was clobbering tk_status, so TCP connect errors were not properly reported on soft mounts. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. Version: Thu, 11 Aug 2005 16:01:28 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-07-07[PATCH] coverity: sunrpc/xprt task null checkKAMBAROV, ZAUR
In __xprt_lock_write() we check to see if `task' is NULL, but in other places we just go and dereference it. `task' shouldn't be NULL anyway, so remove this test. This defect was found automatically by Coverity Prevent, a static analysis tool. Signed-off-by: Zaur Kambarov <zkambarov@coverity.com> Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[SUNRPC]: Fix {s,}size_t printf format strings in xprt.cDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-22[PATCH] RPC: kick off socket connect operations fasterChuck Lever
Make the socket transport kick the event queue to start socket connects immediately. This should improve responsiveness of applications that are sensitive to slow mount operations (like automounters). We are now also careful to cancel the connect worker before destroying the xprt. This eliminates a race where xprt_destroy can finish before the connect worker is even allowed to run. Test-plan: Destructive testing (unplugging the network temporarily). Connectathon with UDP and TCP. Hard-code impossibly small connect timeout. Version: Fri, 29 Apr 2005 15:32:01 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] RPC: TCP reconnects are too slowChuck Lever
When the network layer reports a connection close, the RPC task waiting to reconnect should be notified so it can retry immediately instead of waiting for the normal connection establishment timeout. This reverts a change made in 2.6.6 as part of adding client support for RPC over TCP socket idle timeouts. Test-plan: Destructive testing with NFS over TCP mounts. Version: Fri, 29 Apr 2005 15:31:46 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] RPC: Clean up socket autodisconnectTrond Myklebust
Cancel autodisconnect requests inside xprt_transmit() in order to avoid races. Use more efficient del_singleshot_timer_sync() Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] RPC: fix accounting bug in the case of a truncated RPC messageTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22[PATCH] RPC: Lazy RPC receive buffer allocationOlaf Kirch
Signed-off-by: Olaf Kirch <okir@suse.de> Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 00:16:17 +0000