aboutsummaryrefslogtreecommitdiff
path: root/net/sunrpc
AgeCommit message (Collapse)Author
2008-11-14CRED: Wrap task credential accesses in the SunRPC protocolDavid Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: linux-nfs@vger.kernel.org Signed-off-by: James Morris <jmorris@namei.org>
2008-10-28SUNRPC: Fix potential race in put_rpccred()Trond Myklebust
We have to be careful when we try to unhash the credential in put_rpccred(), because we're not holding the credcache lock, so the call to rpcauth_unhash_cred() may fail if someone else has looked the cred up, and obtained a reference to it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-28SUNRPC: Fix rpcauth_prune_expiredTrond Myklebust
We need to make sure that we don't remove creds from the cred_unused list if they are still under the moratorium, or else they will never get garbage collected. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-28SUNRPC: Respond promptly to server TCP resetsTrond Myklebust
If the server sends us an RST error while we're in the TCP_ESTABLISHED state, then that will not result in a state change, and so the RPC client ends up hanging forever (see http://bugzilla.kernel.org/show_bug.cgi?id=11154) We can intercept the reset by setting up an sk->sk_error_report callback, which will then allow us to initiate a proper shutdown and retry... We also make sure that if the send request receives an ECONNRESET, then we shutdown too... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely) ipv4: Add a missing rcu_assign_pointer() in routing cache. [netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit xen-netfront: Avoid unaligned accesses to IP header lmc: copy_*_user under spinlock [netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
2008-10-16net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely)Johannes Berg
Some code here depends on CONFIG_KMOD to not try to load protocol modules or similar, replace by CONFIG_MODULES where more than just request_module depends on CONFIG_KMOD and and also use try_then_request_module in ebtables. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-15Merge branch 'next'Trond Myklebust
2008-10-14Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: (59 commits) svcrdma: Fix IRD/ORD polarity svcrdma: Update svc_rdma_send_error to use DMA LKEY svcrdma: Modify the RPC reply path to use FRMR when available svcrdma: Modify the RPC recv path to use FRMR when available svcrdma: Add support to svc_rdma_send to handle chained WR svcrdma: Modify post recv path to use local dma key svcrdma: Add a service to register a Fast Reg MR with the device svcrdma: Query device for Fast Reg support during connection setup svcrdma: Add FRMR get/put services NLM: Remove unused argument from svc_addsock() function NLM: Remove "proto" argument from lockd_up() NLM: Always start both UDP and TCP listeners lockd: Remove unused fields in the nlm_reboot structure lockd: Add helper to sanity check incoming NOTIFY requests lockd: change nlmclnt_grant() to take a "struct sockaddr *" lockd: Adjust nlmsvc_lookup_host() to accomodate AF_INET6 addresses lockd: Adjust nlmclnt_lookup_host() signature to accomodate non-AF_INET lockd: Support non-AF_INET addresses in nlm_lookup_host() NLM: Convert nlm_lookup_host() to use a single argument svcrdma: Add Fast Reg MR Data Types ...
2008-10-13net: Rationalise email address: Network Specific PartsAlan Cox
Clean up the various different email addresses of mine listed in the code to a single current and valid address. As Dave says his network merges for 2.6.28 are now done this seems a good point to send them in where they won't risk disrupting real changes. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-10RPC/RDMA: ensure connection attempt is complete before signalling.Tom Talpey
The RPC/RDMA connection logic could return early from reconnection attempts, leading to additional spurious retries. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: correct the reconnect timer backoffTom Talpey
The RPC/RDMA code had a constant 5-second reconnect backoff, and always performed it, even when re-establishing a connection to a server after the RPC layer closed it due to being idle. Make it an geometric backoff (up to 30 seconds), and don't delay idle reconnect. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: optionally emit useful transport info upon connect/disconnect.Tom Talpey
Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: reformat a debug printk to keep lines together.Tom Talpey
The send marshaling code split a particular dprintk across two lines, which makes it hard to extract from logfiles. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: harden connection logic against missing/late rdma_cm upcalls.Tom Talpey
Add defensive timeouts to wait_for_completion() calls in RDMA address resolution, and make them interruptible. Fix the timeout units to milliseconds (formerly jiffies) and move to private header. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: fix connect/reconnect resource leak.Tom Talpey
The RPC/RDMA code can leak RDMA connection manager endpoints in certain error cases on connect. Don't signal unwanted events, and be certain to destroy any allocated qp. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: return a consistent error, when connect fails.Tom Talpey
The xprt_connect call path does not expect such errors as ECONNREFUSED to be returned from failed transport connection attempts, otherwise it translates them to EIO and signals fatal errors. For example, mount.nfs prints simply "internal error". Translate all such errors to ENOTCONN from RPC/RDMA to match sockets behavior. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: adhere to protocol for unpadded client trailing write chunks.Tom Talpey
The RPC/RDMA protocol allows clients and servers to avoid RDMA operations for data which is purely the result of XDR padding. On the client, automatically insert the necessary padding for such server replies, and optionally don't marshal such chunks. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: avoid an oops due to disconnect racing with async upcalls.Tom Talpey
RDMA disconnects yield an upcall from the RDMA connection manager, which can race with rpc transport close, e.g. on ^C of a mount. Ensure any rdma cm_id and qp are fully destroyed before continuing. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: maintain the RPC task bytes-sent statistic.Tom Talpey
Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: suppress retransmit on RPC/RDMA clients.Tom Talpey
An RPC/RDMA client cannot retransmit on an unbroken connection, doing so violates its flow control with the server. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: fix connection IRD/ORD settingTom Tucker
This logic sets the connection parameter that configures the local device and informs the remote peer how many concurrent incoming RDMA_READ requests are supported. The original logic didn't really do what was intended for two reasons: - The max number supported by the device is typically smaller than any one factor in the calculation used, and - The field in the connection parameter structure where the value is stored is a u8 and always overflows for the default settings. So what really happens is the value requested for responder resources is the left over 8 bits from the "desired value". If the desired value happened to be a multiple of 256, the result was zero and it wouldn't connect at all. Given the above and the fact that max_requests is almost always larger than the max responder resources supported by the adapter, this patch simplifies this logic and simply requests the max supported by the device, subject to a reasonable limit. This bug was found by Jim Schutt at Sandia. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: support FRMR client memory registration.Tom Talpey
Configure, detect and use "fastreg" support from IB/iWARP verbs layer to perform RPC/RDMA memory registration. Make FRMR the default memreg mode (will fall back if not supported by the selected RDMA adapter). This allows full and optimal operation over the cxgb3 adapter, and others. Signed-off-by: Tom Talpey <talpey@netapp.com> Acked-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: check selected memory registration mode at runtime.Tom Talpey
At transport creation, check for, and use, any local dma lkey. Then, check that the selected memory registration mode is in fact supported by the RDMA adapter selected for the mount. Fall back to best alternative if not. Signed-off-by: Tom Talpey <talpey@netapp.com> Acked-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: add data types and new FRMR memory registration enum.Tom Talpey
Internal RPC/RDMA structure updates in preparation for FRMR support. Signed-off-by: Tom Talpey <talpey@netapp.com> Acked-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-10RPC/RDMA: refactor the inline memory registration code.Tom Talpey
Refactor the memory registration and deregistration routines. This saves stack space, makes the code more readable and prepares to add the new FRMR registration methods. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-08Merge branch 'from-tomtucker' into for-2.6.28J. Bruce Fields
2008-10-07sunrpc: fix oops in rpc_create when the mount namespace is unsharedCedric Le Goater
On a system with nfs mounts, if a task unshares its mount namespace, a oops can occur when the system is rebooted if the task is the last to unreference the nfs mount. It will try to create a rpc request using utsname() which has been invalidated by free_nsproxy(). The patch fixes the issue by using the global init_utsname() which is always valid. the capability of identifying rpc clients per uts namespace stills needs some extra work so this should not be a problem. BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: [<c024c9ab>] rpc_create+0x332/0x42f Oops: 0000 [#1] DEBUG_PAGEALLOC Pid: 1857, comm: uts-oops Not tainted (2.6.27-rc5-00319-g7686ad5 #4) EIP: 0060:[<c024c9ab>] EFLAGS: 00210287 CPU: 0 EIP is at rpc_create+0x332/0x42f EAX: 00000000 EBX: df26adf0 ECX: c0251887 EDX: 00000001 ESI: df26ae58 EDI: c02f293c EBP: dda0fc9c ESP: dda0fc2c DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process uts-oops (pid: 1857, ti=dda0e000 task=dd9a0778 task.ti=dda0e000) Stack: c0104532 dda0fffc dda0fcac dda0e000 dda0e000 dd93b7f0 00000009 c02f2880 df26aefc dda0fc68 c01096b7 00000000 c0266ee0 c039a070 c039a070 dda0fc74 c012ca67 c039a064 dda0fc8c c012cb20 c03daf74 00000011 00000000 c0275c90 Call Trace: [<c0104532>] ? dump_trace+0xc2/0xe2 [<c01096b7>] ? save_stack_trace+0x1c/0x3a [<c012ca67>] ? save_trace+0x37/0x8c [<c012cb20>] ? add_lock_to_list+0x64/0x96 [<c0256fc4>] ? rpcb_register_call+0x62/0xbb [<c02570c8>] ? rpcb_register+0xab/0xb3 [<c0252f4d>] ? svc_register+0xb4/0x128 [<c0253114>] ? svc_destroy+0xec/0x103 [<c02531b2>] ? svc_exit_thread+0x87/0x8d [<c01a75cd>] ? lockd_down+0x61/0x81 [<c01a577b>] ? nlmclnt_done+0xd/0xf [<c01941fe>] ? nfs_destroy_server+0x14/0x16 [<c0194328>] ? nfs_free_server+0x4c/0xaa [<c019a066>] ? nfs_kill_super+0x23/0x27 [<c0158585>] ? deactivate_super+0x3f/0x51 [<c01695d1>] ? mntput_no_expire+0x95/0xb4 [<c016965b>] ? release_mounts+0x6b/0x7a [<c01696cc>] ? __put_mnt_ns+0x62/0x70 [<c0127501>] ? free_nsproxy+0x25/0x80 [<c012759a>] ? switch_task_namespaces+0x3e/0x43 [<c01275a9>] ? exit_task_namespaces+0xa/0xc [<c0117fed>] ? do_exit+0x4fd/0x666 [<c01181b3>] ? do_group_exit+0x5d/0x83 [<c011fa8c>] ? get_signal_to_deliver+0x2c8/0x2e0 [<c0102630>] ? do_notify_resume+0x69/0x700 [<c011d85a>] ? do_sigaction+0x134/0x145 [<c0127205>] ? hrtimer_nanosleep+0x8f/0xce [<c0126d1a>] ? hrtimer_wakeup+0x0/0x1c [<c0103488>] ? work_notifysig+0x13/0x1b ======================= Code: 70 20 68 cb c1 2c c0 e8 75 4e 01 00 8b 83 ac 00 00 00 59 3d 00 f0 ff ff 5f 77 63 eb 57 a1 00 80 2d c0 8b 80 a8 02 00 00 8d 73 68 <8b> 40 04 83 c0 45 e8 41 46 f7 ff ba 20 00 00 00 83 f8 21 0f 4c EIP: [<c024c9ab>] rpc_create+0x332/0x42f SS:ESP 0068:dda0fc2c Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07SUNRPC: Fix a memory leak in rpcb_getport_asyncTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07SUNRPC: Fix autobind on cloned rpc clientsTrond Myklebust
Despite the fact that cloned rpc clients won't have the cl_autobind flag set, they may still find themselves calling rpcb_getport_async(). For this to happen, it suffices for a _parent_ rpc_clnt to use autobinding, in which case any clone may find itself triggering the !xprt_bound() case in call_bind(). The correct fix for this is to walk back up the tree of cloned rpc clients, in order to find the parent that 'owns' the transport, either because it has clnt->cl_autobind set, or because it originally created the transport... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-07sunrpc: do not pin sunrpc module in the memoryDenis V. Lunev
Basically, try_module_get here are pretty useless. Any other module using this API will pin sunrpc in memory due using exported symbols. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-06svcrdma: Fix IRD/ORD polarityTom Tucker
The inititator/responder resources in the event have been swapped. They no represent what the local peer would set their values to in order to match the peer. Note that iWARP does not exchange these on the wire and the provider is simply putting in the local device max. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Update svc_rdma_send_error to use DMA LKEYTom Tucker
Update the svc_rdma_send_error code to use the DMA LKEY which is valid regardless of the memory registration strategy in use. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Modify the RPC reply path to use FRMR when availableTom Tucker
Use FRMR to map local RPC reply data. This allows RDMA_WRITE to send reply data using a single WR. The FRMR is invalidated by linking the LOCAL_INV WR to the RDMA_SEND message used to complete the reply. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Modify the RPC recv path to use FRMR when availableTom Tucker
RPCRDMA requests that specify a read-list are fetched with RDMA_READ. Using an FRMR to map the data sink improves NFSRDMA security on transports that place the RDMA_READ data sink LKEY on the wire because the valid lifetime of the MR is only the duration of the RDMA_READ. The LKEY is invalidated when the last RDMA_READ WR completes. Mapping the data sink also allows for very large amounts to data to be fetched with a single WR, so if the client is also using FRMR, the entire RPC read-list can be fetched with a single WR. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Add support to svc_rdma_send to handle chained WRTom Tucker
WR can be submitted as linked lists of WR. Update the svc_rdma_send routine to handle WR chains. This will be used to submit a WR that uses an FRMR with another WR that invalidates the FRMR. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Modify post recv path to use local dma keyTom Tucker
Update the svc_rdma_post_recv routine to use the adapter's global LKEY instead of sc_phys_mr which is only valid when using a DMA MR. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Add a service to register a Fast Reg MR with the deviceTom Tucker
Fast Reg MR introduces a new WR type. Add a service to register the region with the adapter and update the completion handling to support completions with a NULL WR context. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Query device for Fast Reg support during connection setupTom Tucker
Query the device capabilities in the svc_rdma_accept function to determine what advanced memory management capabilities are supported by the device. Based on the query, select the most secure model available given the requirements of the transport and capabilities of the adapter. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-06svcrdma: Add FRMR get/put servicesTom Tucker
Add services for the allocating, freeing, and unmapping Fast Reg MR. These services will be used by the transport connection setup, send and receive routines. Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
2008-10-04NLM: Remove unused argument from svc_addsock() functionChuck Lever
Clean up: The svc_addsock() function no longer uses its "proto" argument, so remove it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29nfsd: use nfs client rpc callback programBenny Halevy
since commit ff7d9756b501744540be65e172d27ee321d86103 "nfsd: use static memory for callback program and stats" do_probe_callback uses a static callback program (NFS4_CALLBACK) rather than the one set in clp->cl_callback.cb_prog as passed in by the client in setclientid (4.0) or create_session (4.1). This patches introduces rpc_create_args.prognumber that allows overriding program->number when creating rpc_clnt. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Clean up debug messages in rpcb_clnt.cChuck Lever
The RPCB XDR functions are used for multiple procedures. For instance, rpcb_encode_getaddr() is used for RPCB_GETADDR, RPCB_SET, and RPCB_UNSET. Make the XDR debug messages more generic so they are less confusing. And, unlike in other RPC consumers in the kernel, a single debug flag enables all levels of debug messages in the RPC bind client, including XDR debug messages. Since the XDR decoders already report success or failure in this case, remove redundant debug messages in the mid-level rpcb_register_call() function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Fix up svc_unregister()Chuck Lever
With the new rpcbind code, a PMAP_UNSET will not have any effect on services registered via rpcbind v3 or v4. Implement a version of svc_unregister() that uses an RPCB_UNSET with an empty netid string to make sure we have cleared *all* entries for a kernel RPC service when shutting down, or before starting a fresh instance of the service. Use the new version only when CONFIG_SUNRPC_REGISTER_V4 is enabled; otherwise, the legacy PMAP version is used to ensure complete backwards-compatibility with the Linux portmapper daemon. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Use short-hand IPv6 ANYADDR for RPCB_SETChuck Lever
Clean up: When doing an RPCB_SET, make the kernel's rpcb client use the shorthand "::" for the universal form of the IPv6 ANY address. Without this patch, rpcbind will advertise: 0000:0000:0000:0000:0000:0000:0000:0000.x.y This is cosmetic only. It cleans up the display of information from /sbin/rpcinfo. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Register both netids for AF_INET6 serversChuck Lever
TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Support IPv6 when registering kernel RPC servicesChuck Lever
In order to advertise NFS-related services on IPv6 interfaces via rpcbind, the kernel RPC server implementation must use rpcb_v4_register() instead of rpcb_register(). A new kernel build option allows distributions to use the legacy v2 call until they integrate an appropriate user-space rpcbind daemon that can support IPv6 RPC services. I tried adding some automatic logic to fall back if registering with a v4 protocol request failed, but there are too many corner cases. So I just made it a compile-time switch that distributions can throw when they've replaced portmapper with rpcbind. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Split portmap unregister API into separate functionChuck Lever
Create a separate server-level interface for unregistering RPC services. The mechanics of, and the API for, registering and unregistering RPC services will diverge further as support for IPv6 is added. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Simplify rpcb_register() APIChuck Lever
Bruce suggested there's no need to expose the difference between an error sending the PMAP_SET request and an error reply from the portmapper to rpcb_register's callers. The user space equivalent of rpcb_register() is pmap_set(3), which returns a bool_t : either the PMAP set worked, or it didn't. Simple. So let's remove the "*okay" argument from rpcb_register() and rpcb_v4_register(), and simply return an error if any part of the call didn't work. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Set V6ONLY socket option for RPC listener socketsChuck Lever
My plan is to use an AF_INET listener on systems that support only IPv4, and an AF_INET6 listener on systems that can support IPv6. Incoming IPv4 packets will be posted to an AF_INET6 listener with a mapped IPv4 address. Max Matveev <makc@sgi.com> says: Creating a single listener can be dangerous - if net.ipv6.bindv6only is enabled then it's possible to create another listener in v4 namespace on the same port and steal the traffic from the "unifed" listener. You need to disable V6ONLY explicitly via a sockopt to stop that. Set appropriate socket option on RPC server listener sockets to prevent this. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29SUNRPC: Use proper INADDR_ANY when setting up RPC services on IPv6Chuck Lever
Teach svc_create_xprt() to use the correct ANY address for AF_INET6 based RPC services. No caller uses AF_INET6 yet. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 14:25:59 +0000