aboutsummaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)Author
2008-09-15cfg80211: Add new wireless regulatory infrastructureLuis R. Rodriguez
This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: net/mac80211/mlme.c
2008-09-05cfg80211: keep track of supported interface modesLuis R. Rodriguez
It is obviously good for userspace to know up front which interface modes a given piece of hardware might support (even if adding such an interface might fail later because of concurrency issues), so let's make cfg80211 aware of that. For good measure, disallow adding interfaces in all other modes so drivers don't forget to announce support for one mode when they add it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-02net/wireless/Kconfig: clarify the description for CONFIG_WIRELESS_EXT_SYSFSFlorian Mickler
Current setup with hal and NetworkManager will fail to work without newest hal version with this config option disabled. Although this will solve itself by time, at the moment it is dishonest to say that we don't know any software that uses it, if there are many many people relying on old hal versions. Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29mac80211/cfg80211: HT capabilities for NEW_STAJouni Malinen
Allow userspace (e.g., hostapd) to set HT capabilities for associated STAs. This is based on a patch from Zhu Yi <yi.zhu@intel.com> (only the NL80211_ATTR_HT_CAPABILITY for NEW_STA part is included here). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29mac80211/cfg80211: Add BSS configuration options for AP modeJouni Malinen
This change adds a new cfg80211 command, NL80211_CMD_SET_BSS, to allow AP mode BSS parameters to be changed from user space (e.g., hostapd). The drivers using mac80211 are expected to be modified with separate changes to use the new BSS info parameter for short slot time in the bss_info_changed() handler. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-13wext: Send name on eventsJamal Hadi Salim
In the minimal the wireless extensions oughta send at least the name in addition to the ifindex. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-29nl80211: fix dump callbacksJohannes Berg
Julius Volz pointed out that the dump callbacks in nl80211 were broken and fixed one of them. This patch fixes the other three and also addresses the TODOs there. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Julius Volz <juliusv@google.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-19netns: Use net_eq() to compare net-namespaces for optimization.YOSHIFUJI Hideaki
Without CONFIG_NET_NS, namespace is always &init_net. Compiler will be able to omit namespace comparisons with this patch. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14wext: make sysfs bits optional and deprecate themJohannes Berg
The /sys/class/net/*/wireless/ direcory is, as far as I know, not used by anyone. Additionally, the same data is available via wext ioctls. Hence the sysfs files are pretty much useless. This patch makes them optional and schedules them for removal. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08net/wireless/nl80211.c: fix endless Netlink callback loop.Julius Volz
Although I only tested similar code (I don't use any of this wireless code), the state maintainance between Netlink dump callback invocations seems wrong here and should lead to an endless loop. There are also other examples in the same file which might have the same problem. Perhaps someone can actually test this (or refute my logic). Take the simple example with only one element in the list (which should fit into the message): 1. invocation: Start: idx = 0, start = 0 Loop: condition (++idx < start) => (1 < 0) => false => no continue, fill one entry, exit loop, return skb->len > 0 2. invocation: Start: idx = 0, start = 1 Loop: condition (++idx < start) => (1 < 1) => false => no continue, fill the same entry again, exit loop, return skb->len > 0 3. invocation: Same as 2. invocation, endless invocation of callback. Also, iterations where the filling of an element fails should not be counted as completed, so idx should not be incremented in this case. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-16wext: Create IW_REQUEST_FLAG_COMPAT and set it as needed.David S. Miller
Now low-level WEXT ioctl handlers can do compat handling when necessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16wext: Dispatch and handle compat ioctls entirely in net/wireless/wext.cDavid S. Miller
Next we can kill the hacks in fs/compat_ioctl.c and also dispatch compat ioctls down into the driver and 80211 protocol helper layers in order to handle iw_point objects embedded in stream replies which need to be translated. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16wext: Pull top-level ioctl dispatch logic into helper function.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16wext: Pass iwreq pointer down into standard/private handlers.David S. Miller
They have no need to see the object as an ifreq. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16wext: Parameterize the standard/private handlers.David S. Miller
The WEXT standard and private handlers to use are now arguments to wireless_process_ioctl(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16wext: Pull ioctl permission checking out into helper function.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16wext: Extract private call iw_point handling into seperate functions.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16wext: Extract standard call iw_point handling into seperate function.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16wext: Make adjust_priv_size() take a "struct iw_point *".David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16wext: Remove inline from get_priv_size() and adjust_priv_size().David S. Miller
The compiler inlines when appropriate. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-14mac80211: implement EU regulatory domainTony Vroon
Implement missing EU regulatory domain for mac80211. Based on the information in IEEE 802.11-2007 (specifically pages 1142, 1143 & 1148) and ETSI 301 893 (V1.4.1). With thanks to Johannes Berg. Signed-off-by: Tony Vroon <tony@linx.net> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-10Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/tg3.c drivers/net/wireless/rt2x00/rt2x00dev.c net/mac80211/ieee80211_i.h
2008-06-03netlink: Improve returned error codesThomas Graf
Make nlmsg_trim(), nlmsg_cancel(), genlmsg_cancel(), and nla_nest_cancel() void functions. Return -EMSGSIZE instead of -1 if the provided message buffer is not big enough. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-14wireless: Add missing locking to cfg80211_dev_renameEric W. Biederman
device_rename only performs useful and race free validity checking at the optional sysfs level so depending on it for all of the validity checking in cfg80211_dev_rename is racy. Instead implement all of the needed validity checking and locking in cfg80211_dev_rename. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-14wireless: use get/put_unaligned_* helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ehea/ehea_main.c drivers/net/wireless/iwlwifi/Kconfig drivers/net/wireless/rt2x00/rt61pci.c net/ipv4/inet_timewait_sock.c net/ipv6/raw.c net/mac80211/ieee80211_sta.c
2008-04-08cfg80211: default to regulatory max power for channelJohn W. Linville
If the driver does not specify a maximum power output, default to the regulatory max. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07nl80211: fix STA AID bugJohannes Berg
This fixes the STA AID setting and actually makes hostapd/mac80211 work properly in presence of power-saving stations. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-27cfg80211: don't export ieee80211_get_channelJohannes Berg
This patch makes ieee80211_get_channel a static inline defined in cfg80211's header file which simply calls __ieee80211_get_channel to avoid symbol clashes with the ieee80211 code. The problem was pointed out by David Miller, thanks! Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25Merge branch 'net-2.6.26-netns-20080326' of ↵David S. Miller
git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-dev
2008-03-25wireless: add wiphy channel freq to channel struct lookup helperJohannes Berg
Add ieee80211_get_channel() which gets you a channel struct for a specific wiphy if that channel is present in that wiphy. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-26[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-06nl80211/cfg80211: support for mesh, sta dumpingLuis Carlos Cobo
Added support for mesh id and mesh path operation as well as station structure dumping. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29wireless: update US regulatory domainTomas Winkler
This patch adds channels to US regulatory domain Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29nl80211: Add monitor interface configuration flagsMichael Wu
This allows precise control over what a monitor interface shows. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29wireless: Fix WARN_ON() with ieee802.11bIvo van Doorn
When the driver registers a IEEE80211_BAND_2GHZ band, it can either be 802.11b or 802.11g. But when 802.11b rates are registered "want" will be 3 (since 4 rates are being registered, and each of those 4 rates will decrease "want"). Since this is a correct situation, there is no need to trigger a WARN_ON() for this. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29wireless: fix ERP rate flagsJohannes Berg
In the rate API patch I accidentally reverted the test for ERP rates, this fixes it. All rates except 1, 2, 5.5 and 11 MBit are ERP rates, not those. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29nl80211: export hardware bitrate/channel capabilitiesJohannes Berg
This makes nl80211 export the hardware bitrate/channel capabilities as registered in a wiphy. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29cfg80211 API for channels/bitrates, mac80211 and driver conversionJohannes Berg
This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28WEXT: remove unused variableMasakazu Mokuno
As event_type_pk_size[] is not used, Remove it. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28net/wireless/Kconfig: whitespace correctionsJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28cfg80211/nl80211: implement station attribute retrievalJohannes Berg
After a station is added to the kernel's structures, userspace has to be able to retrieve statistics about that station, especially whether the station was idle and how much bytes were transferred to and from it. This adds the necessary code to nl80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28cfg80211/nl80211: station handlingJohannes Berg
This patch adds station handling to cfg80211/nl80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28cfg80211/nl80211: add beacon settingsJohannes Berg
This adds the necessary API to cfg80211/nl80211 to allow changing beaconing settings. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28cfg80211/nl80211: introduce key handlingJohannes Berg
This introduces key handling to cfg80211/nl80211. Default and group keys can be added, changed and removed; sequence counters for each key can be retrieved. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET]: Consolidate net namespace related proc files creation.Denis V. Lunev
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NET]: Make rtnetlink infrastructure network namespace aware (v3)Denis V. Lunev
After this patch none of the netlink callback support anything except the initial network namespace but the rtnetlink infrastructure now handles multiple network namespaces. Changes from v2: - IPv6 addrlabel processing Changes from v1: - no need for special rtnl_unlock handling - fixed IPv6 ndisc Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-20[WIRELESS] WEXT: Fix userspace corruption on 64-bit.David S. Miller
On 64-bit systems sizeof(struct ifreq) is 8 bytes larger than sizeof(struct iwreq). For GET calls, the wireless extension code copies back into userspace using sizeof(struct ifreq) but userspace and elsewhere only allocates a "struct iwreq". Thus, this copy writes past the end of the iwreq object and corrupts whatever sits after it in memory. Fix the copy_to_user() length. This particularly hurts the compat case because the wireless compat code uses compat_alloc_userspace() and right after this allocated buffer is the current bottom of the user stack, and that's what gets overwritten by the copy_to_user() call. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>