aboutsummaryrefslogtreecommitdiff
path: root/net/xfrm
AgeCommit message (Collapse)Author
2006-12-02[XFRM]: uninline xfrm_selector_match()Andrew Morton
Six callsites, huge. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02SELinux: Fix SA selection semanticsVenkat Yekkirala
Fix the selection of an SA for an outgoing packet to be at the same context as the originating socket/flow. This eliminates the SELinux policy's ability to use/sendto SAs with contexts other than the socket's. With this patch applied, the SELinux policy will require one or more of the following for a socket to be able to communicate with/without SAs: 1. To enable a socket to communicate without using labeled-IPSec SAs: allow socket_t unlabeled_t:association { sendto recvfrom } 2. To enable a socket to communicate with labeled-IPSec SAs: allow socket_t self:association { sendto }; allow socket_t peer_sa_t:association { recvfrom }; Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02[XFRM]: annotate ->new_mapping()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-25[XFRM] STATE: Fix to respond error to get operation if no matching entry exists.Masahide NAKAMURA
When application uses XFRM_MSG_GETSA to get state entry through netlink socket and kernel has no matching one, the application expects reply message with error status by kernel. Kernel doesn't send the message back in the case of Mobile IPv6 route optimization protocols (i.e. routing header or destination options header). This is caused by incorrect return code "0" from net/xfrm/xfrm_user.c(xfrm_user_state_lookup) and it makes kernel skip to acknowledge at net/netlink/af_netlink.c(netlink_rcv_skb). This patch fix to reply ESRCH to application. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: TAKAMIYA Noriaki <takamiya@po.ntts.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-21[XFRM]: nlmsg length not computed correctly in the presence of subpoliciesJamal Hadi Salim
I actually dont have a test case for these; i just found them by inspection. Refer to patch "[XFRM]: Sub-policies broke policy events" for more info Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Acked-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-21[XFRM]: Sub-policies broke policy eventsJamal Hadi Salim
XFRM policy events are broken when sub-policy feature is turned on. A simple test to verify this: run ip xfrm mon on one window and add then delete a policy on another window .. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Acked-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-30[XFRM] xfrm_user: Fix unaligned accesses.David S. Miller
Use memcpy() to move xfrm_address_t objects in and out of netlink messages. The vast majority of xfrm_user was doing this properly, except for copy_from_user_state() and copy_to_user_state(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-24[XFRM]: Fix xfrm_state accountingPatrick McHardy
xfrm_state_num needs to be increased for XFRM_STATE_ACQ states created by xfrm_state_find() to prevent the counter from going negative when the state is destroyed. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-15[XFRM]: Fix xfrm_state_num going negative.David S. Miller
Missing counter bump when hashing in a new ACQ xfrm_state. Now that we have two spots to do the hash grow check, break it out into a helper function. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-11IPsec: fix handling of errors for socket policiesVenkat Yekkirala
This treats the security errors encountered in the case of socket policy matching, the same as how these are treated in the case of main/sub policies, which is to return a full lookup failure. Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-10-11IPsec: correct semantics for SELinux policy matchingVenkat Yekkirala
Currently when an IPSec policy rule doesn't specify a security context, it is assumed to be "unlabeled" by SELinux, and so the IPSec policy rule fails to match to a flow that it would otherwise match to, unless one has explicitly added an SELinux policy rule allowing the flow to "polmatch" to the "unlabeled" IPSec policy rules. In the absence of such an explicitly added SELinux policy rule, the IPSec policy rule fails to match and so the packet(s) flow in clear text without the otherwise applicable xfrm(s) applied. The above SELinux behavior violates the SELinux security notion of "deny by default" which should actually translate to "encrypt by default" in the above case. This was first reported by Evgeniy Polyakov and the way James Morris was seeing the problem was when connecting via IPsec to a confined service on an SELinux box (vsftpd), which did not have the appropriate SELinux policy permissions to send packets via IPsec. With this patch applied, SELinux "polmatching" of flows Vs. IPSec policy rules will only come into play when there's a explicit context specified for the IPSec policy rule (which also means there's corresponding SELinux policy allowing appropriate domains/flows to polmatch to this context). Secondly, when a security module is loaded (in this case, SELinux), the security_xfrm_policy_lookup() hook can return errors other than access denied, such as -EINVAL. We were not handling that correctly, and in fact inverting the return logic and propagating a false "ok" back up to xfrm_lookup(), which then allowed packets to pass as if they were not associated with an xfrm policy. The solution for this is to first ensure that errno values are correctly propagated all the way back up through the various call chains from security_xfrm_policy_lookup(), and handled correctly. Then, flow_cache_lookup() is modified, so that if the policy resolver fails (typically a permission denied via the security module), the flow cache entry is killed rather than having a null policy assigned (which indicates that the packet can pass freely). This also forces any future lookups for the same flow to consult the security module (e.g. SELinux) for current security policy (rather than, say, caching the error on the flow cache entry). This patch: Fix the selinux side of things. This makes sure SELinux polmatching of flow contexts to IPSec policy rules comes into play only when an explicit context is associated with the IPSec policy rule. Also, this no longer defaults the context of a socket policy to the context of the socket since the "no explicit context" case is now handled properly. Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-10-11IPsec: propagate security module errors up from flow_cache_lookupJames Morris
When a security module is loaded (in this case, SELinux), the security_xfrm_policy_lookup() hook can return an access denied permission (or other error). We were not handling that correctly, and in fact inverting the return logic and propagating a false "ok" back up to xfrm_lookup(), which then allowed packets to pass as if they were not associated with an xfrm policy. The way I was seeing the problem was when connecting via IPsec to a confined service on an SELinux box (vsftpd), which did not have the appropriate SELinux policy permissions to send packets via IPsec. The first SYNACK would be blocked, because of an uncached lookup via flow_cache_lookup(), which would fail to resolve an xfrm policy because the SELinux policy is checked at that point via the resolver. However, retransmitted SYNACKs would then find a cached flow entry when calling into flow_cache_lookup() with a null xfrm policy, which is interpreted by xfrm_lookup() as the packet not having any associated policy and similarly to the first case, allowing it to pass without transformation. The solution presented here is to first ensure that errno values are correctly propagated all the way back up through the various call chains from security_xfrm_policy_lookup(), and handled correctly. Then, flow_cache_lookup() is modified, so that if the policy resolver fails (typically a permission denied via the security module), the flow cache entry is killed rather than having a null policy assigned (which indicates that the packet can pass freely). This also forces any future lookups for the same flow to consult the security module (e.g. SELinux) for current security policy (rather than, say, caching the error on the flow cache entry). Signed-off-by: James Morris <jmorris@namei.org>
2006-10-04[XFRM]: BEET modeDiego Beltrami
This patch introduces the BEET mode (Bound End-to-End Tunnel) with as specified by the ietf draft at the following link: http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt The patch provides only single family support (i.e. inner family = outer family). Signed-off-by: Diego Beltrami <diego.beltrami@gmail.com> Signed-off-by: Miika Komu <miika@iki.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Abhinav Pathak <abhinav.pathak@hiit.fi> Signed-off-by: Jeff Ahrenholz <ahrenholz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-04[XFRM]: Clearing xfrm_policy_count[] to zero during flush is incorrect.David S. Miller
When we flush policies, we do a type match so we might not actually delete all policies matching a certain direction. So keep track of how many policies we actually kill and subtract that number from xfrm_policy_count[dir] at the end. Based upon a patch by Masahide NAKAMURA. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-04[XFRM] STATE: Use destination address for src hash.Masahide NAKAMURA
Src hash is introduced for Mobile IPv6 route optimization usage. On current kenrel code it is calculated with source address only. It results we uses the same hash value for outbound state (when the node has only one address for Mobile IPv6). This patch use also destination address as peer information for src hash to be dispersed. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[XFRM]: Do not add a state whose SPI is zero to the SPI hash.Masahide NAKAMURA
SPI=0 is used for acquired IPsec SA and MIPv6 RO state. Such state should not be added to the SPI hash because we do not care about it on deleting path. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-28[XFRM]: xfrm_spi_hash() annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[XFRM]: xfrm_replay_advance() annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[XFRM]: xrfm_replay_check() annotationsAl Viro
seq argument is net-endian Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[XFRM]: xfrm_parse_spi() annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[XFRM]: xfrm_state_lookup() annotationsAl Viro
spi argument of xfrm_state_lookup() is net-endian Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[XFRM]: xfrm_alloc_spi() annotatedAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Fix wildcard as tunnel sourcePatrick McHardy
Hashing SAs by source address breaks templates with wildcards as tunnel source since the source address used for hashing/lookup is still 0/0. Move source address lookup to xfrm_tmpl_resolve_one() so we can use the real address in the lookup. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: remove xerr_idxp from __xfrm_policy_check()James Morris
It seems that during the MIPv6 respin, some code which was originally conditionally compiled around CONFIG_XFRM_ADVANCED was accidently left in after the config option was removed. This patch removes an extraneous pointer (xerr_idxp) which is no longer needed. Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Fix flusing with hash mask.Masahide NAKAMURA
This is a minor fix about transformation state flushing for net-2.6.19. Please apply it. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[NET]: Use SLAB_PANICAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Respect priority in policy lookups.David S. Miller
Even if we find an exact match in the hash table, we must inspect the inexact list to look for a match with a better priority. Noticed by Masahide NAKAMURA <nakam@linux-ipv6.org>. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Extract common hashing code into xfrm_hash.[ch]David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Hash policies when non-prefixed.David S. Miller
This idea is from Alexey Kuznetsov. It is common for policies to be non-prefixed. And for that case we can optimize lookups, insert, etc. quite a bit. For each direction, we have a dynamically sized policy hash table for non-prefixed policies. We also have a hash table on policy->index. For prefixed policies, we have a list per-direction which we will consult on lookups when a non-prefix hashtable lookup fails. This still isn't as efficient as I would like it. There are four immediate problems: 1) Lots of excessive refcounting, which can be fixed just like xfrm_state was 2) We do 2 hash probes on insert, one to look for dups and one to allocate a unique policy->index. Althought I wonder how much this matters since xfrm_state inserts do up to 3 hash probes and that seems to perform fine. 3) xfrm_policy_insert() is very complex because of the priority ordering and entry replacement logic. 4) Lots of counter bumping, in addition to policy refcounts, in the form of xfrm_policy_count[]. This is merely used to let code path(s) know that some IPSEC rules exist. So this count is indexed per-direction, maybe that is overkill. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Hash xfrm_state objects by source address too.David S. Miller
The source address is always non-prefixed so we should use it to help give entropy to the bydst hash. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Kill excessive refcounting of xfrm_state objects.David S. Miller
The refcounting done for timers and hash table insertions are just wasted cycles. We can eliminate all of this refcounting because: 1) The implicit refcount when the xfrm_state object is active will always be held while the object is in the hash tables. We never kfree() the xfrm_state until long after we've made sure that it has been unhashed. 2) Timers are even easier. Once we mark that x->km.state as anything other than XFRM_STATE_VALID (__xfrm_state_delete sets it to XFRM_STATE_DEAD), any timer that fires will do nothing and return without rearming the timer. Therefore we can defer the del_timer calls until when the object is about to be freed up during GC. We have to use del_timer_sync() and defer it to GC because we can't do a del_timer_sync() while holding x->lock which all callers of __xfrm_state_delete hold. This makes SA changes even more light-weight. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Purge dst references to deleted SAs passively.David S. Miller
Just let GC and other normal mechanisms take care of getting rid of DST cache references to deleted xfrm_state objects instead of walking all the policy bundles. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Do not flush all bundles on SA insert.David S. Miller
Instead, simply set all potentially aliasing existing xfrm_state objects to have the current generation counter value. This will make routes get relooked up the next time an existing route mentioning these aliased xfrm_state objects gets used, via xfrm_dst_check(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Simplify xfrm_spi_hashDavid S. Miller
It can use __xfrm{4,6}_addr_hash(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Put more keys into destination hash function.David S. Miller
Besides the daddr, key the hash on family and reqid too. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Add generation count to xfrm_state and xfrm_dst.David S. Miller
Each xfrm_state inserted gets a new generation counter value. When a bundle is created, the xfrm_dst objects get the current generation counter of the xfrm_state they will attach to at dst->xfrm. xfrm_bundle_ok() will return false if it sees an xfrm_dst with a generation count different from the generation count of the xfrm_state that dst points to. This provides a facility by which to passively and cheaply invalidate cached IPSEC routes during SA database changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Dynamic xfrm_state hash table sizing.David S. Miller
The grow algorithm is simple, we grow if: 1) we see a hash chain collision at insert, and 2) we haven't hit the hash size limit (currently 1*1024*1024 slots), and 3) the number of xfrm_state objects is > the current hash mask All of this needs some tweaking. Remove __initdata from "hashdist" so we can use it safely at run time. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Convert xfrm_state hash linkage to hlists.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Pull xfrm_state_by{spi,src} hash table knowledge out of afinfo.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Pull xfrm_state_bydst hash table knowledge out of afinfo.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] POLICY: Support netlink socket interface for sub policy.Masahide NAKAMURA
Sub policy can be used through netlink socket. PF_KEY uses main only and it is TODO to support sub. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Add sorting interface for state and template.Masahide NAKAMURA
Under two transformation policies it is required to merge them. This is a platform to sort state for outbound and templates for inbound respectively. It will be used when Mobile IPv6 and IPsec are used at the same time. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] POLICY: sub policy support.Masahide NAKAMURA
Sub policy is introduced. Main and sub policy are applied the same flow. (Policy that current kernel uses is named as main.) It is required another transformation policy management to keep IPsec and Mobile IPv6 lives separate. Policy which lives shorter time in kernel should be a sub i.e. normally main is for IPsec and sub is for Mobile IPv6. (Such usage as two IPsec policies on different database can be used, too.) Limitation or TODOs: - Sub policy is not supported for per socket one (it is always inserted as main). - Current kernel makes cached outbound with flowi to skip searching database. However this patch makes it disabled only when "two policies are used and the first matched one is bypass case" because neither flowi nor bundle information knows about transformation template size. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-22[XFRM] POLICY: Add Kconfig to support sub policy.Masahide NAKAMURA
Add Kconfig to support sub policy. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Introduce XFRM_MSG_REPORT.Masahide NAKAMURA
XFRM_MSG_REPORT is a message as notification of state protocol and selector from kernel to user-space. Mobile IPv6 will use it when inbound reject is occurred at route optimization to make user-space know a binding error requirement. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Trace which secpath state is reject factor.Masahide NAKAMURA
For Mobile IPv6 usage, it is required to trace which secpath state is reject factor in order to notify it to user space (to know the address which cannot be used route optimized communication). Based on MIPL2 kernel patch. This patch was also written by: Henrik Petander <petander@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Add Mobile IPv6 route optimization protocols to netlink interface.Masahide NAKAMURA
Add Mobile IPv6 route optimization protocols to netlink interface. Route optimization states carry care-of address. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Fix message about transformation user interface.Masahide NAKAMURA
Transformation user interface is not only for IPsec. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] IPV6: Restrict bundle reusingMasahide NAKAMURA
For outbound transformation, bundle is checked whether it is suitable for current flow to be reused or not. In such IPv6 case as below, transformation may apply incorrect bundle for the flow instead of creating another bundle: - The policy selector has destination prefix length < 128 (Two or more addresses can be matched it) - Its bundle holds dst entry of default route whose prefix length < 128 (Previous traffic was used such route as next hop) - The policy and the bundle were used a transport mode state and this time flow address is not matched the bundled state. This issue is found by Mobile IPv6 usage to protect mobility signaling by IPsec, but it is not a Mobile IPv6 specific. This patch adds strict check to xfrm_bundle_ok() for each state mode and address when prefix length is less than 128. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] IPV6: Update outbound state timestamp for each sending.Masahide NAKAMURA
With this patch transformation state is updated last used time for each sending. Xtime is used for it like other state lifetime expiration. Mobile IPv6 enabled nodes will want to know traffic status of each binding (e.g. judgement to request binding refresh by correspondent node, or to keep home/care-of nonce alive by mobile node). The last used timestamp is an important hint about it. Based on MIPL2 kernel patch. This patch was also written by: Henrik Petander <petander@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>