aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2009-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: wireless: remove duplicated .ndo_set_mac_address netfilter: xtables: fix IPv6 dependency in the cluster match tg3: Add GRO support. niu: Add GRO support. ucc_geth: Fix use-after-of_node_put() in ucc_geth_probe(). gianfar: Fix use-after-of_node_put() in gfar_of_init(). kernel: remove HIPQUAD() netpoll: store local and remote ip in net-endian netfilter: fix endian bug in conntrack printks dmascc: fix incomplete conversion to network_device_ops gso: Fix support for linear packets skbuff.h: fix missing kernel-doc ni5010: convert to net_device_ops
2009-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumaskLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: oprofile: Thou shalt not call __exit functions from __init functions cpumask: remove the now-obsoleted pcibus_to_cpumask(): generic cpumask: remove cpumask_t from core cpumask: convert rcutorture.c cpumask: use new cpumask_ functions in core code. cpumask: remove references to struct irqaction's mask field. cpumask: use mm_cpumask() wrapper: kernel/fork.c cpumask: use set_cpu_active in init/main.c cpumask: remove node_to_first_cpu cpumask: fix seq_bitmap_*() functions. cpumask: remove dangerous CPU_MASK_ALL_PTR, &CPU_MASK_ALL
2009-03-31proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-03-30cpumask: use new cpumask_ functions in core code.Rusty Russell
Impact: cleanup Time to clean up remaining laggards using the old cpu_ functions. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Trond.Myklebust@netapp.com
2009-03-29netfilter: xtables: fix IPv6 dependency in the cluster matchPablo Neira Ayuso
This patch fixes a dependency with IPv6: ERROR: "__ipv6_addr_type" [net/netfilter/xt_cluster.ko] undefined! This patch adds a function that checks if the higher bits of the address is 0xFF to identify a multicast address, instead of adding a dependency due to __ipv6_addr_type(). I came up with this idea after Patrick McHardy pointed possible problems with runtime module dependencies. Reported-by: Steven Noonan <steven@uplinklabs.net> Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-29Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2009-03-28netpoll: store local and remote ip in net-endianHarvey Harrison
Allows for the removal of byteswapping in some places and the removal of HIPQUAD (replaced by %pI4). Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-28netfilter: fix endian bug in conntrack printksHarvey Harrison
dcc_ip is treated as a host-endian value in the first printk, but the second printk uses %pI4 which expects a be32. This will cause a mismatch between the debug statement and the warning statement. Treat as a be32 throughout and avoid some byteswapping during some comparisions, and allow another user of HIPQUAD to bite the dust. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-28gso: Fix support for linear packetsHerbert Xu
When GRO/frag_list support was added to GSO, I made an error which broke the support for segmenting linear GSO packets (GSO packets are normally non-linear in the payload). These days most of these packets are constructed by the tun driver, which prefers to allocate linear memory if possible. This is fixed in the latest kernel, but for 2.6.29 and earlier it is still the norm. Therefore this bug causes failures with GSO when used with tun in 2.6.29. Reported-by: James Huang <jamesclhuang@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: smack: Add a new '-CIPSO' option to the network address label configuration netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connections lsm: Remove the socket_post_accept() hook selinux: Remove the "compat_net" compatibility code netlabel: Label incoming TCP connections correctly in SELinux lsm: Relocate the IPv4 security_inet_conn_request() hooks TOMOYO: Fix a typo. smack: convert smack to standard linux lists
2009-03-28Merge branch 'percpu-cpumask-x86-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (682 commits) percpu: fix spurious alignment WARN in legacy SMP percpu allocator percpu: generalize embedding first chunk setup helper percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk() percpu: make x86 addr <-> pcpu ptr conversion macros generic linker script: define __per_cpu_load on all SMP capable archs x86: UV: remove uv_flush_tlb_others() WARN_ON percpu: finer grained locking to break deadlock and allow atomic free percpu: move fully free chunk reclamation into a work percpu: move chunk area map extension out of area allocation percpu: replace pcpu_realloc() with pcpu_mem_alloc() and pcpu_mem_free() x86, percpu: setup reserved percpu area for x86_64 percpu, module: implement reserved allocation and use it for module percpu variables percpu: add an indirection ptr for chunk page map access x86: make embedding percpu allocator return excessive free space percpu: use negative for auto for pcpu_setup_first_chunk() arguments percpu: improve first chunk initial area map handling percpu: cosmetic renames in pcpu_setup_first_chunk() percpu: clean up percpu constants x86: un-__init fill_pud/pmd/pte x86: remove vestigial fix_ioremap prototypes ... Manually merge conflicts in arch/ia64/kernel/irq_ia64.c
2009-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (119 commits) [SCSI] scsi_dh_rdac: Retry for NOT_READY check condition [SCSI] mpt2sas: make global symbols unique [SCSI] sd: Make revalidate less chatty [SCSI] sd: Try READ CAPACITY 16 first for SBC-2 devices [SCSI] sd: Refactor sd_read_capacity() [SCSI] mpt2sas v00.100.11.15 [SCSI] mpt2sas: add MPT2SAS_MINOR(221) to miscdevice.h [SCSI] ch: Add scsi type modalias [SCSI] 3w-9xxx: add power management support [SCSI] bsg: add linux/types.h include to bsg.h [SCSI] cxgb3i: fix function descriptions [SCSI] libiscsi: fix possbile null ptr session command cleanup [SCSI] iscsi class: remove host no argument from session creation callout [SCSI] libiscsi: pass session failure a session struct [SCSI] iscsi lib: remove qdepth param from iscsi host allocation [SCSI] iscsi lib: have lib create work queue for transmitting IO [SCSI] iscsi class: fix lock dep warning on logout [SCSI] libiscsi: don't cap queue depth in iscsi modules [SCSI] iscsi_tcp: replace scsi_debug/tcp_debug logging with iscsi conn logging [SCSI] libiscsi_tcp: replace tcp_debug/scsi_debug logging with session/conn logging ...
2009-03-28netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connectionsPaul Moore
This patch cleans up a lot of the Smack network access control code. The largest changes are to fix the labeling of incoming TCP connections in a manner similar to the recent SELinux changes which use the security_inet_conn_request() hook to label the request_sock and let the label move to the child socket via the normal network stack mechanisms. In addition to the incoming TCP connection fixes this patch also removes the smk_labled field from the socket_smack struct as the minor optimization advantage was outweighed by the difficulty in maintaining it's proper state. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-03-28lsm: Remove the socket_post_accept() hookPaul Moore
The socket_post_accept() hook is not currently used by any in-tree modules and its existence continues to cause problems by confusing people about what can be safely accomplished using this hook. If a legitimate need for this hook arises in the future it can always be reintroduced. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-03-28netlabel: Label incoming TCP connections correctly in SELinuxPaul Moore
The current NetLabel/SELinux behavior for incoming TCP connections works but only through a series of happy coincidences that rely on the limited nature of standard CIPSO (only able to convey MLS attributes) and the write equality imposed by the SELinux MLS constraints. The problem is that network sockets created as the result of an incoming TCP connection were not on-the-wire labeled based on the security attributes of the parent socket but rather based on the wire label of the remote peer. The issue had to do with how IP options were managed as part of the network stack and where the LSM hooks were in relation to the code which set the IP options on these newly created child sockets. While NetLabel/SELinux did correctly set the socket's on-the-wire label it was promptly cleared by the network stack and reset based on the IP options of the remote peer. This patch, in conjunction with a prior patch that adjusted the LSM hook locations, works to set the correct on-the-wire label format for new incoming connections through the security_inet_conn_request() hook. Besides the correct behavior there are many advantages to this change, the most significant is that all of the NetLabel socket labeling code in SELinux now lives in hooks which can return error codes to the core stack which allows us to finally get ride of the selinux_netlbl_inode_permission() logic which greatly simplfies the NetLabel/SELinux glue code. In the process of developing this patch I also ran into a small handful of AF_INET6 cleanliness issues that have been fixed which should make the code safer and easier to extend in the future. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-03-28lsm: Relocate the IPv4 security_inet_conn_request() hooksPaul Moore
The current placement of the security_inet_conn_request() hooks do not allow individual LSMs to override the IP options of the connection's request_sock. This is a problem as both SELinux and Smack have the ability to use labeled networking protocols which make use of IP options to carry security attributes and the inability to set the IP options at the start of the TCP handshake is problematic. This patch moves the IPv4 security_inet_conn_request() hooks past the code where the request_sock's IP options are set/reset so that the LSM can safely manipulate the IP options as needed. This patch intentionally does not change the related IPv6 hooks as IPv6 based labeling protocols which use IPv6 options are not currently implemented, once they are we will have a better idea of the correct placement for the IPv6 hooks. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Morris <jmorris@namei.org>
2009-03-28Merge branch 'linus' into percpu-cpumask-x86-for-linus-2Ingo Molnar
Conflicts: arch/sparc/kernel/time_64.c drivers/gpu/drm/drm_proc.c Manual merge to resolve build warning due to phys_addr_t type change on x86: drivers/gpu/drm/drm_info.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (166 commits) Revert "ax25: zero length frame filtering in AX25" Revert "netrom: zero length frame filtering in NetRom" cfg80211: default CONFIG_WIRELESS_OLD_REGULATORY to n mac80211/iwlwifi: move virtual A-MDPU queue bookkeeping to iwlwifi mac80211: fix aggregation to not require queue stop mac80211: add skb length sanity checking mac80211: unify and fix TX aggregation start mac80211: clean up __ieee80211_tx args mac80211: rework the pending packets code mac80211: fix A-MPDU queue assignment mac80211: rewrite fragmentation iwlwifi: show current driver status in user readable format b43: Add BCM4307 PCI-ID cfg80211: fix locking in nl80211_set_wiphy mac80211: fix RX path ath5k: properly drop packets from ops->tx ar9170: single module build ath9k: fix dma mapping leak of rx buffer upon rmmod rt2x00: New USB ID for rt73usb ath5k: warn and correct rate for unknown hw rate indexes ...
2009-03-27Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-03-27Revert "ax25: zero length frame filtering in AX25"David S. Miller
This reverts commit f99bcff7a290768e035f3d4726e103c6ebe858bf. Like netrom, Alan Cox says that zero lengths have real meaning and are useful in this protocol. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27Revert "netrom: zero length frame filtering in NetRom"David S. Miller
This reverts commit a3ac80a130300573de351083cf4a5b46d233e8bf. Alan Cox says that zero length writes do have special meaning and are useful in this protocol. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27cfg80211: default CONFIG_WIRELESS_OLD_REGULATORY to nLuis R. Rodriguez
And update description and feature-removal schedule according to the new plan. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211/iwlwifi: move virtual A-MDPU queue bookkeeping to iwlwifiJohannes Berg
This patch removes all the virtual A-MPDU-queue bookkeeping from mac80211. Curiously, iwlwifi already does its own bookkeeping, so it doesn't require much changes except where it needs to handle starting and stopping the queues in mac80211. To handle the queue stop/wake properly, we rewrite the software queue number for aggregation frames and internally to iwlwifi keep track of the queues that map into the same AC queue, and only talk to mac80211 about the AC queue. The implementation requires calling two new functions, iwl_stop_queue and iwl_wake_queue instead of the mac80211 counterparts. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Reinette Chattre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: fix aggregation to not require queue stopJohannes Berg
Instead of stopping the entire AC queue when enabling aggregation (which was only done for hardware with aggregation queues) buffer the packets for each station, and release them to the pending skb queue once aggregation is turned on successfully. We get a little more code, but it becomes conceptually simpler and we can remove the entire virtual queue mechanism from mac80211 in a follow-up patch. This changes how mac80211 behaves towards drivers that support aggregation but have no hardware queues -- those drivers will now not be handed packets while the aggregation session is being established, but only after it has been fully established. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: add skb length sanity checkingJohannes Berg
We just found a bug in zd1211rw where it would reject packets in the ->tx() method but leave them modified, which would cause retransmit attempts with completely bogus skbs, eventually leading to a panic due to not having enough headroom in those. This patch adds a sanity check to mac80211 to catch such driver mistakes; in this case we warn and drop the skb. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: unify and fix TX aggregation startJohannes Berg
When TX aggregation becomes operational, we do a number of steps: 1) print a debug message 2) wake the virtual queue 3) notify the driver Unfortunately, 1) and 3) are only done if the driver is first to reply to the aggregation request, it is, however, possible that the remote station replies before the driver! Thus, unify the code for this and call the new function ieee80211_agg_tx_operational in both places where TX aggregation can become operational. Additionally, rename the driver notification from IEEE80211_AMPDU_TX_RESUME to IEEE80211_AMPDU_TX_OPERATIONAL. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: clean up __ieee80211_tx argsJohannes Berg
__ieee80211_tx takes a struct ieee80211_tx_data argument, but only uses a few of its members, namely 'skb' and 'sta'. Make that explicit, so that less internal knowledge is required in ieee80211_tx_pending and the possibility of introducing errors here is removed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: rework the pending packets codeJohannes Berg
The pending packets code is quite incomprehensible, uses memory barriers nobody really understands, etc. This patch reworks it entirely, using the queue spinlock, proper stop bits and the skb queues themselves to indicate whether packets are pending or not (rather than a separate variable like before). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: fix A-MPDU queue assignmentJohannes Berg
Internally, mac80211 requires the skb's queue mapping to be set to the AC queue, not the virtual A-MPDU queue. This is not done correctly currently, this patch moves the code down to directly before the driver is invoked and adds a comment that it will be moved into the driver later. Since this requires __ieee80211_tx() to have the sta pointer, make sure to provide it in ieee80211_tx_pending(). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: rewrite fragmentationJohannes Berg
Fragmentation currently uses an allocated array to store the fragment skbs, and then keeps track of which have been sent and which are still pending etc. This is rather complicated; make it simpler by just chaining the fragments into skb->next and removing from that list when sent. Also simplifies all code that needs to touch fragments, since it now only needs to walk the skb->next list. This is a prerequisite for fixing the stored packet code, which I need to do for proper aggregation packet storing. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27cfg80211: fix locking in nl80211_set_wiphyJohannes Berg
Luis reports that there's a circular locking dependency; this is because cfg80211_dev_rename() will acquire the cfg80211_mutex while the device mutex is held, while this normally is done the other way around. The solution is to open-code the device-getting in nl80211_set_wiphy and require holding the mutex around cfg80211_dev_rename rather than acquiring it within. Also fix a bug -- rtnl locking is expected by drivers so we need to provide it. Reported-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: fix RX pathJohannes Berg
My previous patch ("mac80211: remove mixed-cell and userspace MLME code") was too obvious to me, so obvious that a stupid bug crept in. The IBSS RX function must be invoked for IBSS, of course, not anything != IBSS. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: rate control status only for controlled packetsJohannes Berg
This patch changes mac80211 to not notify the rate control algorithm's tx_status() method when reporting status for a packet that didn't go through the rate control algorithm's get_rate() method. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: add beacon filtering supportKalle Valo
Add IEEE80211_HW_BEACON_FILTERING flag so that driver inform that it supports beacon filtering. Drivers need to call the new function ieee80211_beacon_loss() to notify about beacon loss. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27cfg80211: add feature to hold bssKalle Valo
In beacon filtering there needs to be a way to not expire the BSS even when no beacons are received. Add an interface to cfg80211 to hold BSS and make sure that it's not expired. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: disable power save when scanningKalle Valo
When software scanning we need to disable power save so that all possible probe responses and beacons are received. For hardware scanning assume that hardware will take care of that and document that assumption. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: track beacons separately from the rx path activityKalle Valo
Separate beacon and rx path tracking in preparation for the beacon filtering support. At the same time change ieee80211_associated() to look a bit simpler. Probe requests are now sent only after IEEE80211_PROBE_IDLE_TIME, which is now set to 60 seconds. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: decrease execution of the associated timerKalle Valo
Currently the timer is triggering every two seconds (IEEE80211_MONITORING_INTERVAL). Decrease the timer to only trigger during data idle periods to avoid waking up CPU unnecessary. The timer will still trigger during idle periods, that needs to be fixed later. There's also a functional change that probe requests are sent only when the data path is idle, earlier they were sent also while there was activity on the data path. This is also preparation for the beacon filtering support. Thanks to Johannes Berg for the idea. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: remove mixed-cell and userspace MLME codeJohannes Berg
Neither can currently be set from userspace, so there's no regression potential, and neither will be supported from userspace since the new userspace APIs allow the SME, which is in userspace, to control all we need. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27cfg80211: accept no-op interface mode changesJohannes Berg
When somebody tries to set the interface mode to the existing mode, don't ask the driver but silently accept the setting. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27cfg80211: remove code about country IE support with OLD_REGLuis R. Rodriguez
We had left in code to allow interested developers to add support for parsing country IEs when OLD_REG was enabled. This never happened and since we're going to remove OLD_REG lets just remove these comments and code for it. This code path was never being entered so this has no functional change. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27cfg80211: make regdom module parameter available oustide of OLD_REGLuis R. Rodriguez
It seems a few users are using this module parameter although its not recommended. People are finding it useful despite there being utilities for setting this in userspace. I'm not aware of any distribution using this though. Until userspace and distributions catch up with a default userspace automatic replacement (GeoClue integration would be nirvana) we copy the ieee80211_regdom module parameter from OLD_REG to the new reg code to help these users migrate. Users who are using the non-valid ISO / IEC 3166 alpha "EU" in their ieee80211_regdom module parameter and migrate to non-OLD_REG enabled system will world roam. This also schedules removal of this same ieee80211_regdom module parameter circa March 2010. Hope is by then nirvana is reached and users will abandoned the module parameter completely. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27cfg80211: fix incorrect assumption on last_request for 11dLuis R. Rodriguez
The incorrect assumption is the last regulatory request (last_request) is always a country IE when processing country IEs. Although this is true 99% of the time the first time this happens this could not be true. This fixes an oops in the branch check for the last_request when accessing drv_last_ie. The access was done under the assumption the struct won't be null. Note to stable: to port to 29 replace as follows, only 29 has country IE code: s|NL80211_REGDOM_SET_BY_COUNTRY_IE|REGDOM_SET_BY_COUNTRY_IE Cc: stable@kernel.org Reported-by: Quentin Armitage <Quentin@armitage.org.uk> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27cfg80211: force last_request to be set for OLD_REG if regdom is EULuis R. Rodriguez
Although EU is a bogus alpha2 we need to process the send request as our code depends on last_request being set. Cc: stable@kernel.org Reported-by: Quentin Armitage <Quentin@armitage.org.uk> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27nl80211: Check iftype in cfg80211 codeJouni Malinen
We do not want to require all the drivers using cfg80211 to need to do this. In addition, make the error values consistent by using EOPNOTSUPP instead of semi-random assortment of errno values. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27nl80211: Check that netif_runnin is true in cfg80211 codeJouni Malinen
We do not want to require all the drivers using cfg80211 to need to do this or to be prepared to handle these commands when the interface is down. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27nl80211: Add more through validation of MLME command parametersJouni Malinen
Check that the used authentication type and reason code are valid here so that drivers/mac80211 do not need to care about this. In addition, remove the unnecessary validation of SSID attribute length which is taken care of by netlink policy. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27nl80211: Remove NL80211_CMD_SET_MGMT_EXTRA_IEJouni Malinen
The functionality that NL80211_CMD_SET_MGMT_EXTRA_IE provided can now be achieved with cleaner design by adding IE(s) into NL80211_CMD_TRIGGER_SCAN, NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. Since this is a very recently added command and there are no known (or known planned) applications using NL80211_CMD_SET_MGMT_EXTRA_IE and taken into account how much extra complexity it adds to the IE processing we have now (and need to add in the future to fix IE order in couple of frames), it looks like the best option is to just remove the implementation of this command for now. The enum values themselves are left to avoid changing the nl80211 command or attribute numbers. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: Fix memleak in nl80211 authentication on deinitJouni Malinen
This file was forgotten from the quilt patch that added MLME primitives, so the kfree on interface removal is missing. Fix this potential memleak by freeing the temporary Authentication frame IEs from SME when the interface is being removed. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27mac80211: resume properly, add suspend/resume testJohannes Berg
When mac80211 resumes, it currently doesn't reconfigure the interfaces entirely and also doesn't reconfigure BSS information -- fix this. Also, to be able to test this, add a debugfs file that just calls the suspend/resume code to see what happens when we go through that, without needing the time-consuming suspend/resume cycle. (Original version broke the build for CONFIG_PM=n. Define alternative functions for that situation. -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>