aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2009-04-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: net/mac80211/pm.c
2009-04-24wireless: remove some (bogus?) 'may be used uninitialized' warningsJohn W. Linville
net/mac80211/tx.c: In function ‘ieee80211_tx_h_select_key’: net/mac80211/tx.c:448: warning: ‘key’ may be used uninitialized in this function drivers/net/wireless/ath/ath9k/rc.c: In function ‘ath_rc_rate_getidx’: drivers/net/wireless/ath/ath9k/rc.c:815: warning: ‘nextindex’ may be used uninitialized in this function drivers/net/wireless/hostap/hostap_plx.c: In function ‘prism2_plx_probe’: drivers/net/wireless/hostap/hostap_plx.c:438: warning: ‘cor_index’ may be used uninitialized in this function drivers/net/wireless/hostap/hostap_plx.c:438: warning: ‘cor_offset’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-23af_iucv: Fix merge.Ursula Braun
From: Ursula Braun <ubraun@linux.vnet.ibm.com> net/iucv/af_iucv.c in net-next-2.6 is almost correct. 4 lines should still be deleted. These are the remaining changes: Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/iucv/af_iucv.c
2009-04-23af_iucv: New socket option for setting IUCV MSGLIMITsHendrik Brueckner
The SO_MSGLIMIT socket option modifies the message limit for new IUCV communication paths. The message limit specifies the maximum number of outstanding messages that are allowed for connections. This setting can be lowered by z/VM when an IUCV connection is established. Expects an integer value in the range of 1 to 65535. The default value is 65535. The message limit must be set before calling connect() or listen() for sockets. If sockets are already connected or in state listen, changing the message limit is not supported. For reading the message limit value, unconnected sockets return the limit that has been set or the default limit. For connected sockets, the actual message limit is returned. The actual message limit is assigned by z/VM for each connection and it depends on IUCV MSGLIMIT authorizations specified for the z/VM guest virtual machine. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: cleanup and refactor recvmsg() EFAULT handlingHendrik Brueckner
If the skb cannot be copied to user iovec, always return -EFAULT. The skb is enqueued again, except MSG_PEEK flag is set, to allow user space applications to correct its iovec pointer. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: Provide new socket type SOCK_SEQPACKETHendrik Brueckner
This patch provides the socket type SOCK_SEQPACKET in addition to SOCK_STREAM. AF_IUCV sockets of type SOCK_SEQPACKET supports an 1:1 mapping of socket read or write operations to complete IUCV messages. Socket data or IUCV message data is not fragmented as this is the case for SOCK_STREAM sockets. The intention is to help application developers who write applications or device drivers using native IUCV interfaces (Linux kernel or z/VM IUCV interfaces). Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: Modify iucv msg target class using control msghdrHendrik Brueckner
Allow 'classification' of socket data that is sent or received over an af_iucv socket. For classification of data, the target class of an (native) iucv message is used. This patch provides the cmsg interface for iucv_sock_recvmsg() and iucv_sock_sendmsg(). Applications can use the msg_control field of struct msghdr to set or get the target class as a "socket control message" (SCM/CMSG). Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: Support data in IUCV msg parameter lists (IPRMDATA)Hendrik Brueckner
The patch allows to send and receive data in the parameter list of an iucv message. The parameter list is an arry of 8 bytes that are used by af_iucv as follows: 0..6 7 bytes for socket data and 7 1 byte to store the data length. Instead of storing the data length directly, the difference between 0xFF and the data length is used. This convention does not interfere with the existing use of PRM messages for shutting down the send direction of an AF_IUCV socket (shutdown() operation). Data lenghts greater than 7 (or PRM message byte 8 is less than 0xF8) denotes to special messages. Currently, the special SEND_SHUTDOWN message is supported only. To use IPRM messages, both communicators must set the IUCV_IPRMDATA flag during path negotiation, i.e. in iucv_connect() and path_pending(). To be compatible to older af_iucv implementations, sending PRM messages is controlled by the socket option SO_IPRMDATA_MSG. Receiving PRM messages does not depend on the socket option (but requires the IUCV_IPRMDATA path flag to be set). Sending/Receiving data in the parameter list improves performance for small amounts of data by reducing message_completion() interrupts and memory copy operations. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: add sockopt() to enable/disable use of IPRM_DATA msgsHendrik Brueckner
Provide the socket operations getsocktopt() and setsockopt() to enable/disable sending of data in the parameter list of IUCV messages. The patch sets respective flag only. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23af_iucv: sync sk shutdown flag if iucv path is quiescedHendrik Brueckner
If the af_iucv communication partner quiesces the path to shutdown its receive direction, provide a quiesce callback implementation to shutdown the (local) send direction. This ensures that both sides are synchronized. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-23iucv: provide second per-cpu IUCV command parameter blockUrsula Braun
Some of the IUCV commands can be invoked in interrupt context. Those commands need a different per-cpu IUCV command parameter block, otherwise they might overwrite an IUCV command parameter of a not yet finished IUCV command invocation in process context. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-22nl80211: Add event for authentication/association timeoutJouni Malinen
SME needs to be notified when the authentication or association attempt times out and MLME has stopped processing in order to allow the SME to decide what to do next. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: calculate maximum sleep intervalJohannes Berg
The maximum sleep interval, for powersave purposes, is determined by the DTIM period (it may not be larger) and the required networking latency (it must be small enough to fulfil those constraints). This makes mac80211 calculate the maximum sleep interval based on those constraints, and pass it to the driver. Then the driver should instruct the device to sleep at most that long. Note that the device is responsible for aligning the maximum sleep interval between DTIMs, we make sure it's not longer but it needs to make sure it's between them. Also, group some powersave documentation together and make it more explicit that we support managed mode only, and no IBSS powersaving (yet). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: allow configuring IBSS beacon intervalJohannes Berg
Make the JOIN_IBSS command look at the beacon interval attribute to see if the user requested a specific beacon interval, if not default to 100 TU (wext too). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: remove IEEE80211_CONF_CHANGE_DYNPS_TIMEOUTJohannes Berg
Just setting IEEE80211_CONF_CHANGE_PS should be sufficient for changes in the power saving things. The driver already tells us whether it wants notification of dynps via the "have dynps support" hw flag. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: fix variable truncation on 32-bitJohannes Berg
Stephen Rothwell reported these warnings from a 32-bit build: net/mac80211/mlme.c:1771: warning: left shift count >= width of type net/mac80211/mlme.c:1772: warning: left shift count >= width of type net/mac80211/mlme.c:1773: warning: left shift count >= width of type net/mac80211/mlme.c:1774: warning: left shift count >= width of type net/mac80211/mlme.c:1775: warning: left shift count >= width of type This shows a bug in my code -- BIT(X) uses just "1 << X" which means a 32-bit integer on 32-bit platforms, but the code here needs a u64 on all platforms. Fix this by using "1ULL << X" instead of BIT(X). Thanks Stephen! Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: fix IBSS code to not sleep while atomicJohannes Berg
With the RCU locking here we sleep while in an atomic context, since we can sleep just use mutex locking for the interface list instead of RCU. Sorry, seems I didn't get that in my UML test. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: validate TIM IE length (redux)Johannes Berg
The TIM IE must not be shorter than 4 bytes, so verify that when parsing it and use the proper type. To ease that adjust struct ieee80211_tim_ie to have a virtual bitmap of size at least 1. Also check that the TIM IE is actually present before trying to parse it! Because other people may need the function, make it a static inline in ieee80211.h. (The original "mac80211: validate TIM IE length" was a minimal fix for 2.6.30. This purports to be the full, correct fix. -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: mark all WEXT handlers _GPLJohannes Berg
The fact that these are exported is a technical detail of the conversion period -- we don't want anybody to start relying on these. Ultimately we want things to use cfg80211 only, and once everything that is in wext is converted to cfg80211 drivers will not need to touch wext _at all_. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: clear WEXT SSID when clearing IBSSJohannes Berg
When we leave an IBSS, we should clear the SSID and not just the BSSID, but since WEXT allows configuring while the interface is down we must not clear it when leaving due to taking the iface down, so some complications are needed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: Add set/get for frag/rts threshold and retry limitsJouni Malinen
Add new nl80211 attributes that can be used with NL80211_CMD_SET_WIPHY and NL80211_CMD_GET_WIPHY to manage fragmentation/RTS threshold and retry limits. Since these values are stored in struct wiphy, remove the local copy from mac80211 where feasible (frag & rts threshold). The retry limits are currently needed in struct ieee80211_conf, but these could be eventually removed since the driver should have access to the values in struct wiphy. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: clean up includesJohannes Berg
Trying to separate header files into net/wireless.h and net/cfg80211.h has been a source of confusion. Remove net/wireless.h (because there also is the linux/wireless.h) and subsume everything into net/cfg80211.h -- except the definitions for regulatory structures which get moved to a new header net/regulatory.h. The "new" net/cfg80211.h is now divided into sections. There are no real changes in this patch but code shuffling and some very minor documentation fixes. I have also, to make things reflect reality, put in a copyright line for Luis to net/regulatory.h since that is probably exclusively written by him but was formerly in a file that only had my copyright line. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: convert to cfg80211 IBSS APIJohannes Berg
This converts mac80211 to the new cfg80211 IBSS API, the wext handling functions are called where appropriate. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211/nl80211: add IBSS APIJohannes Berg
This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211/mac80211: move wext SIWMLME into cfg80211Johannes Berg
Since we have ->deauth and ->disassoc we can support the wext SIWMLME call directly without driver wext handlers. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: send wiphy along with netdevJohannes Berg
When listing all wireless netdevs in the system this is useful to print which wiphy they belong to. Just add the attribute, any program that doesn't care will just ignore it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: set CLEAR_PS for pspolled framesChristian Lamparter
This patch sets IEEE80211_TX_CTL_CLEAR_PS_FILT for outgoing frames for a half-wake station. this is necessary if one wants to get ps-poll working properly with a p54 ap. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: Allow scan to be requested in AP modeJouni Malinen
We can allow scan requests in AP mode as long as the interface has not yet been configured to send out Beacon frames (or if beaconing has been disabled prior to the scan request). This makes it easier to scan for neighboring BSSes during AP initialization and makes it possible to run a scan without setting the interface down, if needed. Without this change, the only available option would be to set the interface down, move into station mode, and set the interface up, prior to requesting the scan. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: enable PS by defaultJohannes Berg
Enable PS by default (depending on Kconfig) -- rely on drivers to control the level using pm_qos. Due to the previous patch we turn off PS when necessary due to latency requirements. This has a Kconfig symbol so people can, if they really want, configure the default in their kernels. We may want to keep it at "default y" only in wireless-testing for a while. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: implement beacon filtering in softwareJohannes Berg
Regardless of whether the hardware implements beacon filtering, there's no need to process all beacons in software all the time throughout the stack (mac80211 does a lot, then cfg80211, then in the future possibly userspace). This patch implements the "best possible" beacon filtering in mac80211. "Best possible" means that it can look for changes in all requested information elements, and distinguish vendor IEs by their OUI. In the future, we will add nl80211 API for userspace to request information elements and vendor IE OUIs to watch -- drivers can then implement the best they can do while software implements it fully. It is unclear whether or not this actually saves CPU time, but the data is all in the cache already so it should be fairly cheap. The additional _testing_, however, has great benefit; Without this, and on hardware that doesn't implement beacon filtering, wrong assumptions about, for example, scan result updates could quickly creep into code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: disable powersave if pm_qos asks for low latencyJohannes Berg
When an application asks for a latency lower than the beacon interval there's nothing we can do -- we need to stay awake and not have the AP buffer frames for us. Add code to automatically calculate this constraint in mac80211 so drivers need not concern themselves with it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: improve powersave implementationJohannes Berg
When you have multiple virtual interfaces the current implementation requires setting them up properly from userspace, which is undesirable when we want to default to power save mode. Keep track of powersave requested from userspace per managed mode interface, and only enable powersave globally when exactly one managed mode interface is active and has powersave turned on. Second, only start the dynPS timer when PS is turned on, and properly turn it off when PS is turned off. Third, fix the scan_sdata abuse in the dynps code. Finally, also reorder the code and refactor the code that enables PS or the dynps timer instead of having it copied in two places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: add hardware restart functionJohannes Berg
Some hardware defects may require the hardware to be re-initialised completely from scratch. Drivers would need much information (for instance the current MAC address, crypto keys, beaconing information, etc.) stored duplicated from mac80211 to be able to do this, so let mac80211 help them. The new ieee80211_restart_hw() function requires the same code as resuming, so move that code into a new ieee80211_reconfig() function in util.c and leave only the suspend code in pm.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: convert mutex assert to macroJohannes Berg
That will make the various cases where the WARN_ON can happen distinguishable. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rfkill: Fix broken rfkill LED in 2.6.30-rc1Larry Finger
The rfkill system fails to issue a LED trigger event when the rfkill state changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: re-upload keys only after telling driver about associationJohannes Berg
In the normal WPA or RSN case keys are only configured after associating, so we should do that in that order when resuming as well. It shouldn't really matter since we do not send any data at either point, but iwlwifi prefers it this way and it does seem more natural. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: add cipher capabilitiesJohannes Berg
This adds the necessary code and fields to let drivers specify their cipher capabilities and exports them to userspace. Also update mac80211 to export the ciphers it has. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: send regulatory beacon hint events to userspaceLuis R. Rodriguez
This informs userspace when a change has occured on a world roaming wiphy's channel which has lifted some restrictions due to a regulatory beacon hint. Because this is now sent to userspace through the regulatory multicast group we remove the debug prints we used to use as they are no longer necessary. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: add netlink channel put helperLuis R. Rodriguez
This adds a netlink channel put helper, nl80211_msg_put_channel(), which we will also make use of later for the beacon hints events. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: respect API on orig_flags on channel for beacon hintLuis R. Rodriguez
As part of our documented API we always respect the orig_flag settings on a channel. We forgot to follow this for the beacon hints. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: Report rejected association to user space SMEJouni Malinen
When using nl80211 association, we need to send association response with a failure code to user space SME instead of just internally trying to send out the same (re)association request again couple of times. This fixes problems in association process getting stuck on a failure when user space is not notified in any way that something actually failed. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: include HT capabilities in probe requestJohannes Berg
Include the HT capabilities in the probe request frame. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: pass all probe request IEs to driverJohannes Berg
Instead of just passing the cfg80211-requested IEs, pass the locally generated ones as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: introduce scan IE limit attributeJohannes Berg
This patch introduces a new attribute for a wiphy that tells userspace how long the information elements added to a probe request frame can be at most. It also updates the at76 to advertise that it cannot support that, and, for now until I can fix that, iwlwifi too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: add cfg80211_inform_bssJussi Kivilinna
Added cfg80211_inform_bss() for full-mac devices to use. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: move ieee80211_enable_ht function to mlme.cJohannes Berg
It really belongs into that file since it is only relevant for managed mode. Move 1:1, not even whitespace changes, but make it static and remove from header file. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: Add Michael MIC failure eventJouni Malinen
Define a new nl80211 event, NL80211_CMD_MICHAEL_MIC_FAILURE, to be used to notify user space about locally detected Michael MIC failures. This matches with the MLME-MICHAELMICFAILURE.indication() primitive. Since we do not actually have TSC in the skb anymore when mac80211_ev_michael_mic_failure() is called, that function is changed to take in the TSC as an optional parameter instead of as a requirement to include the TSC after the hdr field (which we did not really follow). For now, TSC is not included in the events from mac80211, but it could be added at some point. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: Generate deauth/disassoc event for locally generated framesJouni Malinen
Previously, nl80211 mlme events were generated only for received deauthentication and disassociation frames. We need to do the same for locally generated ones in order to let applications know that we disconnected (e.g., when AP does not reply to a probe). Rename the nl80211 and cfg80211 functions (s/rx_//) to make it clearer that they are used for both received and locally generated frames. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: Require auth type for NL80211_CMD_AUTHENTICATEJouni Malinen
NL80211_ATTR_AUTH_TYPE is a required parameter for NL80211_CMD_AUTHENTICATE. We are currently (by chance) defaulting to open system authentication if the attribute is not specified. It is better to just reject the invalid command. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>