aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2008-07-14tipc: Remove unneeded parameter to tipc_createport_raw()Allan Stephens
This patch eliminates an unneeded parameter when creating a low-level TIPC port object. Instead of returning both the pointer to the port structure and the port's reference ID, it now returns only the pointer since the port structure contains the reference ID as one of its fields. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14netlabel: return msg overflow error from netlbl_cipsov4_list fasterDenis V. Lunev
Currently, we are trying to place the information from the kernel to 1, 2, 3 and 4 pages sequentially. These pages are allocated via slab. Though, from the slab point of view steps 3 and 4 are equivalent on most architectures. So, lets skip 3 pages attempt. By the way, should we switch from .doit to .dumpit interface here? The amount of data seems quite big for me. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14net: Remove references to wan-router.txt in KconfigsJohann Felix Soden
This patch removes references in drivers/net/wan/Kconfig and net/wanrouter/Kconfig to Documentation/networking/wan-router.txt which was removed in commit 99971e70fdc1862e120f3319fc0a4dba8c728acf ("[WANPIPE]: Forgotten bits of Sangoma drivers removal."). Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-148021q: Check return of dev_set_promiscuity/allmultiWang Chen
dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. Here, we check all positive increment for promiscuity and allmulti to get error return. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14ipv4: Fix ipmr unregister device oopsWang Chen
An oops happens during device unregister. The following oops happened when I add two tunnels, which use a same device, and then delete one tunnel. Obviously deleting tunnel "A" causes device unregister, which send a notification, and after receiving notification, ipmr do unregister again for tunnel "B" which also use same device. That is wrong. After receiving notification, ipmr only needs to decrease reference count and don't do duplicated unregister. Fortunately, IPv6 side doesn't add tunnel in ip6mr, so it's clean. This patch fixs: - unregister device oops - using after dev_put() Here is the oops: === Jul 11 15:39:29 wangchen kernel: ------------[ cut here ]------------ Jul 11 15:39:29 wangchen kernel: kernel BUG at net/core/dev.c:3651! Jul 11 15:39:29 wangchen kernel: invalid opcode: 0000 [#1] Jul 11 15:39:29 wangchen kernel: Modules linked in: ipip tunnel4 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ipv6 snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device af_packet binfmt_misc button battery ac loop dm_mod usbhid ff_memless pcmcia firmware_class ohci1394 8139too mii ieee1394 yenta_socket rsrc_nonstatic pcmcia_core ide_cd_mod cdrom snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm i2c_i801 snd_timer snd i2c_core soundcore snd_page_alloc rng_core shpchp ehci_hcd uhci_hcd pci_hotplug intel_agp agpgart usbcore ext3 jbd ata_piix ahci libata dock edd fan thermal processor thermal_sys piix sd_mod scsi_mod ide_disk ide_core [last unloaded: freq_table] Jul 11 15:39:29 wangchen kernel: Jul 11 15:39:29 wangchen kernel: Pid: 4102, comm: mroute Not tainted (2.6.26-rc9-default #69) Jul 11 15:39:29 wangchen kernel: EIP: 0060:[<c024636b>] EFLAGS: 00010202 CPU: 0 Jul 11 15:39:29 wangchen kernel: EIP is at rollback_registered+0x61/0xe3 Jul 11 15:39:29 wangchen kernel: EAX: 00000001 EBX: ecba6000 ECX: 00000000 EDX: ffffffff Jul 11 15:39:29 wangchen kernel: ESI: 00000001 EDI: ecba6000 EBP: c03de2e8 ESP: ed8e7c3c Jul 11 15:39:29 wangchen kernel: DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Jul 11 15:39:29 wangchen kernel: Process mroute (pid: 4102, ti=ed8e6000 task=ed41e830 task.ti=ed8e6000) Jul 11 15:39:29 wangchen kernel: Stack: ecba6000 c024641c 00000028 c0284e1a 00000001 c03de2e8 ecba6000 eecff360 Jul 11 15:39:29 wangchen kernel: c0284e4c c03536f4 fffffff8 00000000 c029a819 ecba6000 00000006 ecba6000 Jul 11 15:39:29 wangchen kernel: 00000000 ecba6000 c03de2c0 c012841b ffffffff 00000000 c024639f ecba6000 Jul 11 15:39:29 wangchen kernel: Call Trace: Jul 11 15:39:29 wangchen kernel: [<c024641c>] unregister_netdevice+0x2f/0x51 Jul 11 15:39:29 wangchen kernel: [<c0284e1a>] vif_delete+0xaf/0xc3 Jul 11 15:39:29 wangchen kernel: [<c0284e4c>] ipmr_device_event+0x1e/0x30 Jul 11 15:39:29 wangchen kernel: [<c029a819>] notifier_call_chain+0x2a/0x47 Jul 11 15:39:29 wangchen kernel: [<c012841b>] raw_notifier_call_chain+0x9/0xc Jul 11 15:39:29 wangchen kernel: [<c024639f>] rollback_registered+0x95/0xe3 Jul 11 15:39:29 wangchen kernel: [<c024641c>] unregister_netdevice+0x2f/0x51 Jul 11 15:39:29 wangchen kernel: [<c0284e1a>] vif_delete+0xaf/0xc3 Jul 11 15:39:29 wangchen kernel: [<c0285eee>] ip_mroute_setsockopt+0x47a/0x801 Jul 11 15:39:29 wangchen kernel: [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd] Jul 11 15:39:29 wangchen kernel: [<c01727c4>] __find_get_block_slow+0xda/0xe4 Jul 11 15:39:29 wangchen kernel: [<c0172a7f>] __find_get_block+0xf8/0x122 Jul 11 15:39:29 wangchen kernel: [<c0172a7f>] __find_get_block+0xf8/0x122 Jul 11 15:39:29 wangchen kernel: [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd] Jul 11 15:39:29 wangchen kernel: [<c0263501>] ip_setsockopt+0xa9/0x9ee Jul 11 15:39:29 wangchen kernel: [<eea5d563>] journal_cancel_revoke+0xda/0x110 [jbd] Jul 11 15:39:29 wangchen kernel: [<eea5a70c>] do_get_write_access+0x2df/0x313 [jbd] Jul 11 15:39:29 wangchen kernel: [<eea69287>] __ext3_get_inode_loc+0xcf/0x271 [ext3] Jul 11 15:39:29 wangchen kernel: [<eea743c7>] __ext3_journal_dirty_metadata+0x13/0x32 [ext3] Jul 11 15:39:29 wangchen kernel: [<c0116434>] __wake_up+0xf/0x15 Jul 11 15:39:29 wangchen kernel: [<eea5a424>] journal_stop+0x1bd/0x1c6 [jbd] Jul 11 15:39:29 wangchen kernel: [<eea703a7>] __ext3_journal_stop+0x19/0x34 [ext3] Jul 11 15:39:29 wangchen kernel: [<c014291e>] get_page_from_freelist+0x94/0x369 Jul 11 15:39:29 wangchen kernel: [<c01408f2>] filemap_fault+0x1ac/0x2fe Jul 11 15:39:29 wangchen kernel: [<c01a605e>] security_sk_alloc+0xd/0xf Jul 11 15:39:29 wangchen kernel: [<c023edea>] sk_prot_alloc+0x36/0x78 Jul 11 15:39:29 wangchen kernel: [<c0240037>] sk_alloc+0x3a/0x40 Jul 11 15:39:29 wangchen kernel: [<c0276062>] raw_hash_sk+0x46/0x4e Jul 11 15:39:29 wangchen kernel: [<c0166aff>] d_alloc+0x1b/0x157 Jul 11 15:39:29 wangchen kernel: [<c023e4d1>] sock_common_setsockopt+0x12/0x16 Jul 11 15:39:29 wangchen kernel: [<c023cb1e>] sys_setsockopt+0x6f/0x8e Jul 11 15:39:29 wangchen kernel: [<c023e105>] sys_socketcall+0x15c/0x19e Jul 11 15:39:29 wangchen kernel: [<c0103611>] sysenter_past_esp+0x6a/0x99 Jul 11 15:39:29 wangchen kernel: [<c0290000>] unix_poll+0x69/0x78 Jul 11 15:39:29 wangchen kernel: ======================= Jul 11 15:39:29 wangchen kernel: Code: 83 e0 01 00 00 85 c0 75 1f 53 53 68 12 81 31 c0 e8 3c 30 ed ff ba 3f 0e 00 00 b8 b9 7f 31 c0 83 c4 0c 5b e9 f5 26 ed ff 48 74 04 <0f> 0b eb fe 89 d8 e8 21 ff ff ff 89 d8 e8 62 ea ff ff c7 83 e0 Jul 11 15:39:29 wangchen kernel: EIP: [<c024636b>] rollback_registered+0x61/0xe3 SS:ESP 0068:ed8e7c3c Jul 11 15:39:29 wangchen kernel: ---[ end trace c311acf85d169786 ]--- === Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14ipv4: Check return of dev_set_allmultiWang Chen
allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. Here, we check the positive increment for allmulti to get error return. PS: For unwinding tunnel creating, we let ipip->ioctl() to handle it. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14ipv6: Fix using after dev_put()Wang Chen
Patrick McHardy pointed it out. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14ipv6: Check return of dev_set_allmultiWang Chen
allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. Here, we check the positive increment for allmulti to get error return. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14bridge: Check return of dev_set_promiscuityWang Chen
dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. Here, we check the positive increment for promiscuity to get error return. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14af_packet: Check return of dev_set_promiscuity/allmultiWang Chen
dev_set_promiscuity/allmulti might overflow. Commit: "netdevice: Fix promiscuity and allmulti overflow" in net-next makes dev_set_promiscuity/allmulti return error number if overflow happened. In af_packet, we check all positive increment for promiscuity and allmulti to get error return. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-07-14net-sched: cls_flow: add perturbation supportPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14Merge branch 'master' of git://eden-feed.erg.abdn.ac.uk/net-next-2.6David S. Miller
2008-07-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/netfilter/nf_conntrack_proto_tcp.c
2008-07-14netfilter: Let nf_ct_kill() callers know if del_timer() returned true.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14mac80211: dont add a STA which is not in the same IBSSEmmanuel Grumbach
This patch avoids adding STAs that don't belong to our IBSS ieee80211_bssid_match matches also bcast address so also APs were added Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix struct ieee80211_tx_queue_paramsJohannes Berg
Multiple issues: - there are no "default" values needed - cw_min/cw_max can be larger than documented - restructure to decrease size - use get_unaligned_le16 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix TX sequence numbersJohannes Berg
This patch makes mac80211 assign proper sequence numbers to QoS-data frames. It also removes the old sequence number code because we noticed that only the driver or hardware can assign sequence numbers to non-QoS-data and especially management frames in a race-free manner because beacons aren't passed through mac80211's TX path. This patch also adds temporary code to the rt2x00 drivers to not break them completely, that code will have to be reworked for proper sequence numbers on beacons. It also moves sequence number assignment down in the TX path so no sequence numbers are assigned to frames that are dropped. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14wext: make sysfs bits optional and deprecate themJohannes Berg
The /sys/class/net/*/wireless/ direcory is, as far as I know, not used by anyone. Additionally, the same data is available via wext ioctls. Hence the sysfs files are pretty much useless. This patch makes them optional and schedules them for removal. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix RX sequence number checkJohannes Berg
According to 802.11-2007, we are doing the wrong thing in the sequence number checks when receiving frames. This fixes it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: Fix ieee80211_rx_reorder_ampdu: ignore QoS null packetsEmmanuel Grumbach
This patch fixes the check at the entrance to ieee80211_rx_reorder_ampdu. This check has been broken by 'mac80211: rx.c use new helpers'. Letting QoS NULL packet in ieee80211_rx_reorder_ampdu led to packet loss in RX. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: revamp beacon configurationJohannes Berg
This patch changes mac80211's beacon configuration handling to never pass skbs to the driver directly but rather always require the driver to use ieee80211_beacon_get(). Additionally, it introduces "change flags" on the config_interface() call to enable drivers to figure out what is changing. Finally, it removes the beacon_update() driver callback in favour of having IBSS beacon delivered by ieee80211_beacon_get() as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: push interface checks downJohannes Berg
This patch pushes the "netif_running()" and "same type as before" checks down into ieee80211_if_change_type() to centralise the logic instead of duplicating it for cfg80211 and wext. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: revamp virtual interface handlingJohannes Berg
This patch revamps the virtual interface handling and makes the code much easier to follow. Fewer functions, better names, less spaghetti code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: make master netdev handling saneJohannes Berg
Currently, almost every interface type has a 'bss' pointer pointing to BSS information. This BSS information, however, is for a _local_ BSS, not for the BSS we joined, so having it on a STA mode interface makes little sense, but now they have it pointing to the master device, which is an AP mode virtual interface. However, except for some bitrate control data, this pointer is only used in AP/VLAN modes (for power saving stations.) Overall, it is not necessary to even have the master netdev be a valid virtual interface, and it doesn't have to be on the list of interfaces either. This patch changes the master netdev to be special, it now - no longer is on the list of virtual interfaces, which lets me remove a lot of tests for that - no longer has sub_if_data attached, since that isn't used Additionally, this patch changes some vlan/ap mode handling that is related to these 'bss' pointers described above (but in the VLAN case they actually make sense because there they point to the AP they belong to); it also adds some debugging code to IEEE80211_DEV_TO_SUB_IF to validate it is not called on the master netdev any more. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: power management wext hooksSamuel Ortiz
This patch implements the power management routines wireless extensions for mac80211. For now we only support switching PS mode between on and off. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-13dccp ccid-3: Length of loss intervalsGerrit Renker
This corrects an error in the computation of the open loss interval I_0: * the interval length is (highest_seqno - start_seqno) + 1 * and not (highest_seqno - start_seqno). This condition was not fully clear in RFC 3448, but reflects the current revision state of rfc3448bis and is also consistent with RFC 4340, 6.1.1. Further changes: ---------------- * variable renamed due to line length constraints; * explicit typecast to `s64' to avoid implicit signed/unsigned casting. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-07-13dccp ccid-3: Fix a loss detection bugGerrit Renker
This fixes a bug in the logic of the TFRC loss detection: * new_loss_indicated() should not be called while a loss is pending; * but the code allows this; * thus, for two subsequent gaps in the sequence space, when loss_count has not yet reached NDUPACK=3, the loss_count is falsely reduced to 1. To avoid further and similar problems, all loss handling and loss detection is now done inside tfrc_rx_hist_handle_loss(), using an appropriate routine to track new losses. Further changes: ---------------- * added a reminder that no RX history operations should be performed when rx_handle_loss() has identified a (new) loss, since the function takes care of packet reordering during loss detection; * made tfrc_rx_hist_loss_pending() bool (thanks to an earlier suggestion by Arnaldo); * removed unused functions. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-07-13dccp: Upgrade NDP count from 3 to 6 bytesGerrit Renker
RFC 4340, 7.7 specifies up to 6 bytes for the NDP Count option, whereas the code is currently limited to up to 3 bytes. This seems to be a relict of an earlier draft version and is brought up to date by the patch. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-07-13dccp ccid-3: Fix error in loss detectionGerrit Renker
The TFRC loss detection code used the wrong loss condition (RFC 4340, 7.7.1): * the difference between sequence numbers s1 and s2 instead of * the number of packets missing between s1 and s2 (one less than the distance). Since this condition appears in many places of the code, it has been put into a separate function, dccp_loss_free(). Further changes: ---------------- * tidied up incorrect typing (it was using `int' for u64/s64 types); * optimised conditional statements for common case of non-reordered packets; * rewrote comments/documentation to match the changes. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2008-07-10xfrm: Add a XFRM_STATE_AF_UNSPEC flag to xfrm_usersa_infoSteffen Klassert
Add a XFRM_STATE_AF_UNSPEC flag to handle the AF_UNSPEC behavior for the selector family. Userspace applications can set this flag to leave the selector family of the xfrm_state unspecified. This can be used to to handle inter family tunnels if the selector is not set from userspace. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-10ipv6: missed namespace context in ipv6_rthdr_rcvDenis V. Lunev
Signed-off-by: Denis V. Lunev <den@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-10netlabel: netlink_unicast calls kfree_skb on error path by itselfDenis V. Lunev
So, no need to kfree_skb here on the error path. In this case we can simply return. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-10ipv4: fib_trie: Fix lookup error returnBen Hutchings
In commit a07f5f508a4d9728c8e57d7f66294bf5b254ff7f "[IPV4] fib_trie: style cleanup", the changes to check_leaf() and fn_trie_lookup() were wrong - where fn_trie_lookup() would previously return a negative error value from check_leaf(), it now returns 0. Now fn_trie_lookup() doesn't appear to care about plen, so we can revert check_leaf() to returning the error value. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Tested-by: William Boughton <bill@boughton.de> Acked-by: Stephen Heminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-10tcp: correct kcalloc usageMilton Miller
kcalloc is supposed to be called with the count as its first argument and the element size as the second. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-07-09netfilter: nf_nat_snmp_basic: fix a range check in NAT for SNMPDavid Howells
Fix a range check in netfilter IP NAT for SNMP to always use a big enough size variable that the compiler won't moan about comparing it to ULONG_MAX/8 on a 64-bit platform. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-09netfilter: nf_conntrack_tcp: fix endless loopPatrick McHardy
When a conntrack entry is destroyed in process context and destruction is interrupted by packet processing and the packet is an attempt to reopen a closed connection, TCP conntrack tries to kill the old entry itself and returns NF_REPEAT to pass the packet through the hook again. This may lead to an endless loop: TCP conntrack repeatedly finds the old entry, but can not kill it itself since destruction is already in progress, but destruction in process context can not complete since TCP conntrack is keeping the CPU busy. Drop the packet in TCP conntrack if we can't kill the connection ourselves to avoid this. Reported by: hemao77@gmail.com [ Kernel bugzilla #11058 ] Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-09rc80211_pid: Fix fast_start parameter handlingMattias Nissler
This removes the fast_start parameter from the rc_pid parameters information and instead uses the parameter macro when initializing the rc_pid state. Since the parameter is only used on initialization, there is no point of making exporting it via debugfs. This also fixes uninitialized memory references to the fast_start and norm_offset parameters detected by the kmemcheck utility. Thanks to Vegard Nossum for reporting the bug. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08netdev: Move atomic queue state bits into netdev_queue.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08net: Delete NETDEVICES_MULTIQUEUE kconfig option.David S. Miller
Multiple TX queue support is a core networking feature. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move _xmit_lock and xmit_lock_owner into netdev_queue.David S. Miller
Accesses are mostly structured such that when there are multiple TX queues the code transformations will be a little bit simpler. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Make qdisc_run take a netdev_queue.David S. Miller
This allows us to use this calling convention all the way down into qdisc_restart(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Make netif_schedule() routines work with netdev_queue objects.David S. Miller
Only plain netif_schedule() remains taking a net_device, mostly as a compatability item while we transition the rest of these interfaces. Everything else calls netif_schedule_queue() or __netif_schedule(), both of which take a netdev_queue pointer. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move gso_skb into netdev_queue.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08mac80211: Decrease number of explicit ->tx_queue references.David S. Miller
Accomplish this by using local variables. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Add qdisc_tx_is_noop() helper and use in IPV6.David S. Miller
This indicates if the NOOP scheduler is what is active for TX on a given device. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08net: Clean up explicit ->tx_queue references in link watch.David S. Miller
First, we add a qdisc_tx_changing() helper which returns true if the qdisc attachment is in transition. Second, we remove an assertion warning which is of limited value and is hard to express precisely in a multiqueue environment. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move next_sched into struct netdev_queue.David S. Miller
We schedule queues, not the device, for output queue processing in BH. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Make netem queue agnostic.David S. Miller
It just wants the root qdisc given an arbitrary qdisc, and that is simply qdisc->dev_queue->qdisc Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-03 06:54:57 +0000