| Age | Commit message (Collapse) | Author |
|---|
|
The commit 95c385 broke proper source address selection for cases in which
there is a address which is makred 'deprecated'. The commit mistakenly
changed ifa->flags to ifa_result->flags (probably copy/paste error from a
few lines above) in the 'Rule 3' address selection code.
The patch restores the previous RFC-compliant behavior.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
(with no apologies to C Heston)
On Mon, 2007-10-09 at 21:00 +0800, Herbert Xu wrote:
On Sun, Sep 02, 2007 at 01:11:29PM +0000, Christian Kujau wrote:
> >
> > after upgrading to 2.6.23-rc5 (and applying davem's fix [0]), lockdep
> > was quite noisy when I tried to shape my external (wireless) interface:
> >
> > [ 6400.534545] FahCore_78.exe/3552 just changed the state of lock:
> > [ 6400.534713] (&dev->ingress_lock){-+..}, at: [<c038d595>]
> > netif_receive_skb+0x2d5/0x3c0
> > [ 6400.534941] but this lock took another, soft-read-irq-unsafe lock in the
> > past:
> > [ 6400.535145] (police_lock){-.--}
>
> This is a genuine dead-lock. The police lock can be taken
> for reading with softirqs on. If a second CPU tries to take
> the police lock for writing, while holding the ingress lock,
> then a softirq on the first CPU can dead-lock when it tries
> to get the ingress lock.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1) Comments suggest that setting optlen to zero will unbind
the socket from whatever device it might be attached to. This
hasn't been the case since at least 2.2.x because the first thing
this function does is return -EINVAL if 'optlen' is less than
sizeof(int).
This check also means that passing in a two byte string doesn't
work so well. It's almost as if this code was testing with "eth?"
patterned strings and nothing else :-)
Fix this by breaking the logic of this facility out into a
seperate function which validates optlen more appropriately.
The optlen==0 and small string cases now work properly.
2) We should reset the cached route of the socket after we have made
the device binding changes, not before.
Reported by Ben Greear.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netlink_run_queue() doesn't handle multiple processes processing the
queue concurrently. Serialize queue processing in inet_diag to fix
a oops in netlink_rcv_skb caused by netlink_run_queue passing a
NULL for the skb.
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000054
[349587.500454] printing eip:
[349587.500457] c03318ae
[349587.500459] *pde = 00000000
[349587.500464] Oops: 0000 [#1]
[349587.500466] PREEMPT SMP
[349587.500474] Modules linked in: w83627hf hwmon_vid i2c_isa
[349587.500483] CPU: 0
[349587.500485] EIP: 0060:[<c03318ae>] Not tainted VLI
[349587.500487] EFLAGS: 00010246 (2.6.22.3 #1)
[349587.500499] EIP is at netlink_rcv_skb+0xa/0x7e
[349587.500506] eax: 00000000 ebx: 00000000 ecx: c148d2a0 edx: c0398819
[349587.500510] esi: 00000000 edi: c0398819 ebp: c7a21c8c esp: c7a21c80
[349587.500517] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
[349587.500521] Process oidentd (pid: 17943, ti=c7a20000 task=cee231c0 task.ti=c7a20000)
[349587.500527] Stack: 00000000 c7a21cac f7c8ba78 c7a21ca4 c0331962 c0398819 f7c8ba00 0000004c
[349587.500542] f736f000 c7a21cb4 c03988e3 00000001 f7c8ba00 c7a21cc4 c03312a5 0000004c
[349587.500558] f7c8ba00 c7a21cd4 c0330681 f7c8ba00 e4695280 c7a21d00 c03307c6 7fffffff
[349587.500578] Call Trace:
[349587.500581] [<c010361a>] show_trace_log_lvl+0x1c/0x33
[349587.500591] [<c01036d4>] show_stack_log_lvl+0x8d/0xaa
[349587.500595] [<c010390e>] show_registers+0x1cb/0x321
[349587.500604] [<c0103bff>] die+0x112/0x1e1
[349587.500607] [<c01132d2>] do_page_fault+0x229/0x565
[349587.500618] [<c03c8d3a>] error_code+0x72/0x78
[349587.500625] [<c0331962>] netlink_run_queue+0x40/0x76
[349587.500632] [<c03988e3>] inet_diag_rcv+0x1f/0x2c
[349587.500639] [<c03312a5>] netlink_data_ready+0x57/0x59
[349587.500643] [<c0330681>] netlink_sendskb+0x24/0x45
[349587.500651] [<c03307c6>] netlink_unicast+0x100/0x116
[349587.500656] [<c0330f83>] netlink_sendmsg+0x1c2/0x280
[349587.500664] [<c02fcce9>] sock_sendmsg+0xba/0xd5
[349587.500671] [<c02fe4d1>] sys_sendmsg+0x17b/0x1e8
[349587.500676] [<c02fe92d>] sys_socketcall+0x230/0x24d
[349587.500684] [<c01028d2>] syscall_call+0x7/0xb
[349587.500691] =======================
[349587.500693] Code: f0 ff 4e 18 0f 94 c0 84 c0 0f 84 66 ff ff ff 89 f0 e8 86 e2 fc ff e9 5a ff ff ff f0 ff 40 10 eb be 55 89 e5 57 89 d7 56 89 c6 53 <8b> 50 54 83 fa 10 72 55 8b 9e 9c 00 00 00 31 c9 8b 03 83 f8 0f
Reported by Athanasius <link@miggy.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of skbs in sk->write_queue do not have skb->dst because
we do not fill skb->dst when we allocate new skb in append_data().
BTW, I think we may not need to (or we should not) increment some stats
when using corking; if 100 sendmsg() (with MSG_MORE) result in 2 packets,
how many should we increment?
If 100, we should set skb->dst for every queued skbs.
If 1 (or 2 (*)), we increment the stats for the first queued skb and
we should just skip incrementing OutDiscards for the rest of queued skbs,
adn we should also impelement this semantics in other places;
e.g., we should increment other stats just once, not 100 times.
*: depends on the place we are discarding the datagram.
I guess should just increment by 1 (or 2).
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So I've had a deadlock reported to me. I've found that the sequence of
events goes like this:
1) process A (modprobe) runs to remove ip_tables.ko
2) process B (iptables-restore) runs and calls setsockopt on a netfilter socket,
increasing the ip_tables socket_ops use count
3) process A acquires a file lock on the file ip_tables.ko, calls remove_module
in the kernel, which in turn executes the ip_tables module cleanup routine,
which calls nf_unregister_sockopt
4) nf_unregister_sockopt, seeing that the use count is non-zero, puts the
calling process into uninterruptible sleep, expecting the process using the
socket option code to wake it up when it exits the kernel
4) the user of the socket option code (process B) in do_ipt_get_ctl, calls
ipt_find_table_lock, which in this case calls request_module to load
ip_tables_nat.ko
5) request_module forks a copy of modprobe (process C) to load the module and
blocks until modprobe exits.
6) Process C. forked by request_module process the dependencies of
ip_tables_nat.ko, of which ip_tables.ko is one.
7) Process C attempts to lock the request module and all its dependencies, it
blocks when it attempts to lock ip_tables.ko (which was previously locked in
step 3)
Theres not really any great permanent solution to this that I can see, but I've
developed a two part solution that corrects the problem
Part 1) Modifies the nf_sockopt registration code so that, instead of using a
use counter internal to the nf_sockopt_ops structure, we instead use a pointer
to the registering modules owner to do module reference counting when nf_sockopt
calls a modules set/get routine. This prevents the deadlock by preventing set 4
from happening.
Part 2) Enhances the modprobe utilty so that by default it preforms non-blocking
remove operations (the same way rmmod does), and add an option to explicity
request blocking operation. So if you select blocking operation in modprobe you
can still cause the above deadlock, but only if you explicity try (and since
root can do any old stupid thing it would like.... :) ).
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since we're now using a generic tuple decoding function in ICMP
connection tracking, ipv4_get_l4proto() might get called with a
fragmented packet from within an ICMP error. Remove the error
message we used to print when this happens.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
From: Denis V. Lunev <den@openvz.org>
addrconf_dad_failure calls addrconf_dad_stop which takes referenced address
and drops the count. So, in6_ifa_put perrformed at out: is extra. This
results in message: "Freeing alive inet6 address" and not released dst entries.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Not all are listed, same as the IPV4 devinet bug.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bug: http://bugzilla.kernel.org/show_bug.cgi?id=8876
Not all ips are shown by "ip addr show" command when IPs number assigned to an
interface is more than 60-80 (in fact it depends on broadcast/label etc
presence on each address).
Steps to reproduce:
It's terribly simple to reproduce:
# for i in $(seq 1 100); do ip ad add 10.0.$i.1/24 dev eth10 ; done
# ip addr show
this will _not_ show all IPs.
Looks like the problem is in netlink/ipv4 message processing.
This is fix from bug submitter, it looks correct.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When msg_iovlen is zero we shouldn't try to dereference
msg_iov. Right now the only thing that tries to do so
is skb_copy_and_csum_datagram_iovec. Since the total
length should also be zero if msg_iovlen is zero, it's
sufficient to check the total length there and simply
return if it's zero.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On device initialization the event filters are cleared. In case of
clearing the filters the extra condition type shall be omitted.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch updates the HCI security filter with support for the
Bluetooth 2.1 commands and events.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The timestamp structure needs special handling in case of compat
programs. Use the same wrapping method the network core uses.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Reported by Rick Jones.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The pktgen_thread.pid is set to current->pid and is never used
after this. So remove this at all.
Found during isolating the explicit pid/tgid usage.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It doesn't seem to have any effect on the x86 architecture but it does
have effect on the Axis CRIS architecture.
Signed-off-by: Jesper Bengtsson <jesper.bengtsson@axis.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CONFIG_NET_CLS_ACT is enabled, tc_classify() is called twice in
prio_classify(). This causes "interesting" behaviour: with the setup
below, packets are duplicated, sent twice to ifb0, and then loop in and
out of ifb0.
The patch uses the previously calculated return value in the switch,
which is probably what Patrick had in mind in commit
bdba91ec70fb5ccbdeb1c7068319adc6ea9e1a7d -- maybe Patrick can
double-check this?
-- example setup --
ifconfig ifb0 up
tc qdisc add dev ifb0 root netem delay 2s
tc qdisc add dev $ETH root handle 1: prio
tc filter add dev $ETH parent 1: protocol ip prio 10 u32 \
match ip dst 172.24.110.6/32 flowid 1:1 \
action mirred egress redirect dev ifb0
ping -c1 172.24.110.6
Signed-off-by: Lucas Nussbaum <lucas.nussbaum@imag.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bridge code calls ethtool to get speed. The conversion to using
only ethtool_ops broke the case of devices without ethtool_ops.
This is a new regression in 2.6.23.
Rearranged the switch to a logical order, and use gcc initializer.
Ps: speed should have been part of the network device structure from
the start rather than burying it in ethtool.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes some packet leakage in bridge. The bridging code was
allowing forward table entries to be generated even if a device was
being blocked. The fix is to not add forwarding database entries
unless the port is active.
The bug arose as part of the conversion to processing STP frames
through normal receive path (in 2.6.17).
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-dev
|
|
Cell phone networks do link layer retransmissions and other
things that cause unnecessary timeout retransmits. So allow
the minimum RTO to be inflated per-route to deal with this.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If an INIT with invalid parameter length look like this:
Parameter Type : 1
Parameter Length: 800
and not contain any payload, SCTP will ignore this parameter and send
back a INIT-ACK.
This patch is fix to handle this invalid parameter length correctly.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
|
|
Currently we abort on the INIT chunk we our backlog is currenlty
exceeded. Delay this about untill COOKIE-ECHO to give the user
time to accept the socket. Also, make sure that we treat
sk_max_backlog of 0 as no connections allowed.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
|
|
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
|
|
When performing a retransmit, do not include the chunk if
it was sent less then 1 rtt ago. The reason is that we
may receive the SACK very soon and wouldn't retransmit.
Suggested by Randy Stewart.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
|
|
Do not set Unconfirmed transports to Inactive state. This may
result in an inactive association being destroyed since we start
counting errors on "inactive" transports against the association.
This was found at the SCTP interop event.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
|
|
sctp_bindx() allows the use of unspecified port. The problem is
that every address we bind to ends up selecting a new port if
the user specified port 0. This patch allows re-use of the
already selected port when the port from bindx was 0.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
|
|
When multi bundling SHUTDOWN-ACK message is received in ESTAB state,
this will cause "sctp protocol violation state" message print many times.
If SHUTDOWN-ACK is bundled 300 times in one packet, message will be
print 300 times. The same problem also exists when received unexpected
HEARTBEAT-ACK message which is bundled message times.
This patch used net_ratelimit() to suppress error messages print too fast.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
|
|
PROTOCOL VIOLATION error cause in ABORT is bad encode when make abort
chunk. When SCTP encode ABORT chunk with PROTOCOL VIOLATION error cause,
it just add the error messages to PROTOCOL VIOLATION error cause, the
rest four bytes(struct sctp_paramhdr) is just add to the chunk, not
change the length of error cause. This cause the ABORT chunk to be a bad
format. The chunk is like this:
ABORT chunk
Chunk type: ABORT (6)
Chunk flags: 0x00
Chunk length: 72 (*1)
Protocol violation cause
Cause code: Protocol violation (0x000d)
Cause length: 62 (*2)
Cause information: 5468652063756D756C61746976652074736E2061636B2062...
Cause padding: 0000
[Needless] 00030010
Chunk Length(*1) = 72 but Cause length(*2) only 62, not include the
extend 4 bytes.
((72 - sizeof(chunk_hdr)) = 68) != (62 +3) / 4 * 4
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
|
|
At function sctp_addto_chunk(), it do pad before add payload to chunk if
chunk length is not 4-byte alignment. But it do pad with a bad length.
This patch fixed this probleam.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
|
|
Currently we only assign the sequence number to a packet that
we are about to transmit. This however breaks the Partial
Reliability extensions, because it's possible for us to
never transmit a packet, i.e. it expires before we get to send
it. In such cases, if the message contained multiple SCTP
fragments, and we did manage to send the first part of the
message, the Stream sequence numbers would get into invalid
state and cause receiver to stall.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
|
|
When we recieve a FWD-TSN (meaning the peer has abandoned the data),
we need to clean up any partially received messages that may be
hanging out on the re-assembly or re-ordering queues. This is
a MUST requirement that was not properly done before.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com.>
|
|
Initially pkt_dev can be NULL this causes netif_subqueue_stopped to
oops. The patch below should cure it. But maybe the pktgen TX logic
should be reworked to better support the new multiqueue support.
Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I tried to preserve bridging code as it was before, but logic is quite
strange - I think we should free skb on error, since it is already
unshared and thus will just leak.
Herbert Xu states:
> + if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
> + goto out;
If this happens it'll be a double-free on skb since we'll
return NF_DROP which makes the caller free it too.
We could return NF_STOLEN to prevent that but I'm not sure
whether that's correct netfilter semantics. Patrick, could
you please make a call on this?
Patrick McHardy states:
NF_STOLEN should work fine here.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes a crash that may occur when the routine dev_mc_sync()
deletes an address from the list it is currently going through. It
saves the pointer to the next element before deleting the current one.
The problem may also exist in dev_mc_unsync().
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replacing n & (n - 1) for power of 2 check by is_power_of_2(n)
Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
People often get tripped up by this function and think that
it does not implemented the prescribed algorithms from
RFC2414 and RFC3390, even though it does.
So add a comment to head off such misunderstandings in the
future.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix IP[V6]_ADD_MEMBERSHIP and IP[V6]_DROP_MEMBERSHIP to
return -EPROTO for connection oriented sockets.
Signed-off-by: Flavio Leitner <fleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In testing our ESP/AH offload hardware, I discovered an issue with how
AH handles mutable fields in IPv4. RFC 4302 (AH) states the following
on the subject:
For IPv4, the entire option is viewed as a unit; so even
though the type and length fields within most options are immutable
in transit, if an option is classified as mutable, the entire option
is zeroed for ICV computation purposes.
The current implementation does not zero the type and length fields,
resulting in authentication failures when communicating with hosts
that do (i.e. FreeBSD).
I have tested record route and timestamp options (ping -R and ping -T)
on a small network involving Windows XP, FreeBSD 6.2, and Linux hosts,
with one router. In the presence of these options, the FreeBSD and
Linux hosts (with the patch or with the hardware) can communicate.
The Windows XP host simply fails to accept these packets with or
without the patch.
I have also been trying to test source routing options (using
traceroute -g), but haven't had much luck getting this option to work
*without* AH, let alone with.
Signed-off-by: Nick Bowler <nbowler@ellipticsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9p: fix bad error path in conversion routines
9p: remove deprecated v9fs_fid_lookup_remove()
9p: update maintainers and documentation
9p: fix use after free
|
|
When buf_check_overflow() returns != 0 we will hit kfree(ERR_PTR(err))
and it will not be happy about it.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
On 7/22/07, Adrian Bunk <bunk@stusta.de> wrote:
The Coverity checker spotted the following use-after-free
in net/9p/mux.c:
<-- snip -->
...
struct p9_conn *p9_conn_create(struct p9_transport *trans, int msize,
unsigned char *extended)
{
...
if (!m->tagpool) {
kfree(m);
return ERR_PTR(PTR_ERR(m->tagpool));
}
...
<-- snip -->
Also spotted was a leak of the same structure further down in the function.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
It seems an extraneous trailing ';' has slipped in to the error handling for a
name registration failure causing the error path to trigger unconditionally.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Easily avoidable compiler warnings bug me.
Building irmod without CONFIG_SYSCTL currently results in :
net/irda/irmod.c:132: warning: label 'out_err_2' defined but not used
But that can easily be avoided by simply moving the label inside
the existing "#ifdef CONFIG_SYSCTL" one line above it.
This patch moves the label and buys us one less warning with no
ill effects.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
