aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2007-07-10SUNRPC: Add a convenient default for the hostname when calling rpc_create()Chuck Lever
A couple of callers just use a stringified IP address for the rpc client's hostname. Move the logic for constructing this into rpc_create(), so it can be shared. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Rename rpcb_getport to be consistent with new rpcb_getport_sync nameChuck Lever
Clean up, for consistency. Rename rpcb_getport as rpcb_getport_async, to match the naming scheme of rpcb_getport_sync. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Rename rpcb_getport_external routineChuck Lever
In preparation for handling NFS mount option parsing in the kernel, rename rpcb_getport_external as rpcb_get_port_sync, and make it available always (instead of only when CONFIG_ROOT_NFS is enabled). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Allow rpcbind requests to be interrupted by a signal.Chuck Lever
This allows NFS mount requests and RPC re-binding to be interruptible if the server isn't responding. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Suppress some noisy and unnecessary printk() calls in call_verify()Trond Myklebust
Convert them into dprintk() calls. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Ensure RPCSEC_GSS destroys the security context when freeing a credTrond Myklebust
Do so by set the gc_proc field to RPC_GSS_PROC_DESTROY, and then sending a NULL RPC call. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Ensure that the struct gss_auth lifetime exceeds the credential'sTrond Myklebust
Add a refcount in order to ensure that the gss_auth doesn't disappear from underneath us while we're freeing up GSS contexts. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Remove the tk_auth macro...Trond Myklebust
We should almost always be deferencing the rpc_auth struct by means of the credential's cr_auth field instead of the rpc_clnt->cl_auth anyway. Fix up that historical mistake, and remove the macro that propagated it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Allow rpc_auth to run clean up before the rpc_client is destroyedTrond Myklebust
RPCSEC_GSS needs to be able to send NULL RPC calls to the server in order to free up any remaining GSS contexts. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Convert gss_ctx_lock to an RCU lockTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Convert the credential garbage collector into a shrinker callbackTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Give credential cache a local spinlockTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Convert the credcache lookup code to use RCUTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: cleanup rpc credential cache garbage collectionTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Enforce atomic updates of rpc_cred->cr_flagsTrond Myklebust
Convert to the use of atomic bitops... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: replace casts in auth_unix.c with container_of()Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Clean up rpc credential initialisationTrond Myklebust
Add a helper rpc_cred_init() Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Mark auth and cred operation tables as constant.Trond Myklebust
Also do the same for gss_api operation tables. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Rename rpcauth_destroy() to rpcauth_release()Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Add the helper function 'rpc_call_null()'Trond Myklebust
Does a NULL RPC call and returns a pointer to the resulting rpc_task. The call may be either synchronous or asynchronous. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Make rpc_ping() staticTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Fix races in rpcauth_createTrond Myklebust
See the FIXME: auth_flavors[] really needs a lock and module refcounting. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Fix a memory leak in gss_create()Trond Myklebust
Fix a memory leak in gss_create() whereby the rpc credcache was not being freed if the rpc_mkpipe() call failed. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Fix a typo in unx_create()Trond Myklebust
We want to set the unix_cred_cache.nextgc on the first call to unx_create(), which should be when unix_auth.au_count === 1 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Fix a memory leak in the auth credcache codeTrond Myklebust
The leak only affects the RPCSEC_GSS caches, since they are the only ones that are dynamically allocated... Rename the existing rpcauth_free_credcache() to rpcauth_clear_credcache() in order to better describe its role, then add a new function rpcauth_destroy_credcache() that actually frees the cache in addition to clearing it out. Also move the call to destroy the credcache in gss_destroy() to come before the rpc upcall pipe is unlinked. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Add a field to track the number of kernel users of an rpc_pipeTrond Myklebust
This allows us to correctly deduce when we need to remove the pipe. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Clean up rpc_pipefs.Trond Myklebust
Add a dentry_ops with a d_delete() method in order to ensure that dentries are removed as soon as the last reference is gone. Clean up rpc_depopulate() so that it only removes files that were created via rpc_populate(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Enable non-exclusive create in rpc_mkpipe()Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Add a downcall queue to struct rpc_inodeTrond Myklebust
Currently, the downcall queue is tied to the struct gss_auth, which means that different RPCSEC_GSS pseudoflavours must use different upcall pipes. Add a list to struct rpc_inode that can be used instead. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Always match an upcall message in gss_pipe_downcall()Trond Myklebust
It used to be possible for an rpc.gssd daemon to stuff the RPC credential cache for any rpc client simply by creating RPCSEC_GSS contexts and then doing downcalls. In practice, no daemons ever made use of this feature. Remove this feature now, since it will be impossible to figure out which mechanism a given context actually matches if we enable more than one gss mechanism to use the same upcall pipe. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Remove the gss_auth spinlockTrond Myklebust
We're just as well off using the inode spinlock instead. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Add a backpointer from the struct rpc_cred to the rpc_authTrond Myklebust
Cleans up an issue whereby rpcsec_gss uses the rpc_clnt->cl_auth. If we want to be able to add several rpc_auths to a single rpc_clnt, then this abuse must go. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: fix hang due to eventd deadlock...Trond Myklebust
Brian Behlendorf writes: The root cause of the NFS hang we were observing appears to be a rare deadlock between the kernel provided usermodehelper API and the linux NFS client. The deadlock can arise because both of these services use the generic linux work queues. The usermodehelper API run the specified user application in the context of the work queue. And NFS submits both cleanup and reconnect work to the generic work queue for handling. Normally this is fine but a deadlock can result in the following situation. - NFS client is in a disconnected state - [events/0] runs a usermodehelper app with an NFS dependent operation, this triggers an NFS reconnect. - NFS reconnect happens to be submitted to [events/0] work queue. - Deadlock, the [events/0] work queue will never process the reconnect because it is blocked on the previous NFS dependent operation which will not complete.` The solution is simply to run reconnect requests on rpciod. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: clean up rpc_call_async/rpc_call_sync/rpc_run_taskTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Move rpc_register_client and friends into net/sunrpc/clnt.cTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Remove redundant calls to rpciod_up()/rpciod_down()Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Make create_client() take a reference to the rpciod workqueueTrond Myklebust
Ensures that an rpc_client always has the possibility to send asynchronous RPC calls. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Optimise rpciod_up()Trond Myklebust
Instead of taking the mutex every time we just need to increment/decrement rpciod_users, we can optmise by using atomic_inc_not_zero and atomic_dec_and_test. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Don't create an rpc_pipefs directory before rpc_clone is initialisedTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Remove rpc_clnt->cl_countTrond Myklebust
The kref now does most of what cl_count + cl_user used to do. The only remaining role for cl_count is to tell us if we are in a 'shutdown' phase. We can provide that information using a single bit field instead of a full atomic counter. Also rename rpc_destroy_client() to rpc_close_client(), which reflects better what its role is these days. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Make rpc_clone take a reference instead of using cl_countTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Kill rpc_clnt->cl_oneshotTrond Myklebust
Replace it with explicit calls to rpc_shutdown_client() or rpc_destroy_client() (for the case of asynchronous calls). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Kill rpc_clnt->cl_deadTrond Myklebust
Its use is at best racy, and there is only one user (lockd), which has additional locking that makes the whole thing redundant. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Convert rpc_clnt->cl_users to a krefTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Clean up tk_pid allocation and make it locklessTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Add a per-rpc_clnt spinlockTrond Myklebust
Use that to protect the rpc_clnt->cl_tasks list instead of using a global lock. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Move rpc_task->tk_task list into struct rpc_clntTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10NFSv4: Clean up nfs4_call_async()Trond Myklebust
Use rpc_run_task() instead of doing it ourselves. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits) bonding/bond_main.c: make 2 functions static ps3: gigabit ethernet driver for PS3, take3 [netdrvr] Fix dependencies for ax88796 ne2k clone driver eHEA: Capability flag for DLPAR support Remove sk98lin ethernet driver. sunhme.c:quattro_pci_find() must be __devinit bonding / ipv6: no addrconf for slaves separately from master atl1: remove write-only var in tx handler macmace: use "unsigned long flags;" Cleanup usbnet_probe() return value handling netxen: deinline and sparse fix eeprom_93cx6: shorten pulse timing to match spec (bis) phylib: Add Marvell 88E1112 phy id phylib: cleanup marvell.c a bit AX88796 network driver IOC3: Switch to pci refcounting safe APIs e100: Fix Tyan motherboard e100 not receiving IPMI commands QE Ethernet driver writes to wrong register to mask interrupts rrunner.c:rr_init() must be __devinit tokenring/3c359.c:xl_init() must be __devinit ...
2007-07-10bonding / ipv6: no addrconf for slaves separately from masterJay Vosburgh
At present, when a device is enslaved to bonding, if ipv6 is active then addrconf will be initated on the slave (because it is closed then opened during the enslavement processing). This causes DAD and RS packets to be sent from the slave. These packets in turn can confuse switches that perform ipv6 snooping, causing them to incorrectly update their forwarding tables (if, e.g., the slave being added is an inactve backup that won't be used right away) and direct traffic away from the active slave to a backup slave (where the incoming packets will be dropped). This patch alters the behavior so that addrconf will only run on the master device itself. I believe this is logically correct, as it prevents slaves from having an IPv6 identity independent from the master. This is consistent with the IPv4 behavior for bonding. This is accomplished by (a) having bonding set IFF_SLAVE sooner in the enslavement processing than currently occurs (before open, not after), and (b) having ipv6 addrconf ignore UP and CHANGE events on slave devices. The eql driver also uses the IFF_SLAVE flag. I inspected eql, and I believe this change is reasonable for its usage of IFF_SLAVE, but I did not test it. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-26 07:21:24 +0000