aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2010-03-02bridge: Fix build error when IGMP_SNOOPING is not enabledSridhar Samudrala
Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/firmware/iscsi_ibft.c
2010-02-28scm: Only support SCM_RIGHTS on unix domain sockets.Eric W. Biederman
We use scm_send and scm_recv on both unix domain and netlink sockets, but only unix domain sockets support everything required for file descriptor passing, so error if someone attempts to pass file descriptors over netlink sockets. Cc: stable@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (44 commits) rcu: Fix accelerated GPs for last non-dynticked CPU rcu: Make non-RCU_PROVE_LOCKING rcu_read_lock_sched_held() understand boot rcu: Fix accelerated grace periods for last non-dynticked CPU rcu: Export rcu_scheduler_active rcu: Make rcu_read_lock_sched_held() take boot time into account rcu: Make lockdep_rcu_dereference() message less alarmist sched, cgroups: Fix module export rcu: Add RCU_CPU_STALL_VERBOSE to dump detailed per-task information rcu: Fix rcutorture mod_timer argument to delay one jiffy rcu: Fix deadlock in TREE_PREEMPT_RCU CPU stall detection rcu: Convert to raw_spinlocks rcu: Stop overflowing signed integers rcu: Use canonical URL for Mathieu's dissertation rcu: Accelerate grace period if last non-dynticked CPU rcu: Fix citation of Mathieu's dissertation rcu: Documentation update for CONFIG_PROVE_RCU security: Apply lockdep-based checking to rcu_dereference() uses idr: Apply lockdep-based diagnostics to rcu_dereference() uses radix-tree: Disable RCU lockdep checking in radix tree vfs: Abstract rcu_dereference_check for files-fdtable use ...
2010-02-28ethtool: do not set some flags, if others failedJeff Garzik
NETIF_F_NTUPLE flag setting introduced a bug: non-ntuple flags like LRO may be successfully set, before ioctl(2) returns failure to userspace. The set-flags operation should be all-or-none, rather than leaving things in an inconsistent state prior to reporting failure to userspace. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28netlink: Adding inode field to /proc/net/netlinkMasatake YAMATO
The Inode field in /proc/net/{tcp,udp,packet,raw,...} is useful to know the types of file descriptors associated to a process. Actually lsof utility uses the field. Unfortunately, unlike /proc/net/{tcp,udp,packet,raw,...}, /proc/net/netlink doesn't have the field. This patch adds the field to /proc/net/netlink. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6
2010-02-28bridge: Make IGMP snooping depend upon BRIDGE.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Add multicast count/interval sysfs entriesHerbert Xu
This patch allows the user to the IGMP parameters related to the snooping function of the bridge. This includes various time values and retransmission limits. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Add hash elasticity/max sysfs entriesHerbert Xu
This patch allows the user to control the hash elasticity/max parameters. The elasticity setting does not take effect until the next new multicast group is added. At which point it is checked and if after rehashing it still can't be satisfied then snooping will be disabled. The max setting on the other hand takes effect immediately. It must be a power of two and cannot be set to a value less than the current number of multicast group entries. This is the only way to shrink the multicast hash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Add multicast_snooping sysfs toggleHerbert Xu
This patch allows the user to disable IGMP snooping completely through a sysfs toggle. It also allows the user to reenable snooping when it has been automatically disabled due to hash collisions. If the collisions have not been resolved however the system will refuse to reenable snooping. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Add multicast_router sysfs entriesHerbert Xu
This patch allows the user to forcibly enable/disable ports as having multicast routers attached. A port with a multicast router will receive all multicast traffic. The value 0 disables it completely. The default is 1 which lets the system automatically detect the presence of routers (currently this is limited to picking up queries), and 2 means that the port will always receive all multicast traffic. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Add multicast data-path hooksHerbert Xu
This patch finally hooks up the multicast snooping module to the data path. In particular, all multicast packets passing through the bridge are fed into the module and switched by it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Add multicast start/stop hooksHerbert Xu
This patch hooks up the bridge start/stop and add/delete/disable port functions to the new multicast module. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Add multicast forwarding functionsHerbert Xu
This patch adds code to perform selective multicast forwarding. We forward multicast traffic to a set of ports plus all multicast router ports. In order to avoid duplications among these two sets of ports, we order all ports by the numeric value of their pointers. The two lists are then walked in lock-step to eliminate duplicates. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Add core IGMP snooping supportHerbert Xu
This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Split may_deliver/deliver_clone out of br_floodHerbert Xu
This patch moves the main loop body in br_flood into the function may_deliver. The code that clones an skb and delivers it is moved into the deliver_clone function. This allows this to be reused by the future multicast forward function. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Use BR_INPUT_SKB_CB on xmit pathHerbert Xu
this patch makes BR_INPUT_SKB_CB available on the xmit path so that we could avoid passing the br pointer around for the purpose of collecting device statistics. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Avoid unnecessary clone on forward pathHerbert Xu
When the packet is delivered to the local bridge device we may end up cloning it unnecessarily if no bridge port can receive the packet in br_flood. This patch avoids this by moving the skb_clone into br_flood. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Allow tail-call on br_pass_frame_upHerbert Xu
This patch allows tail-call on the call to br_pass_frame_up in br_handle_frame_finish. This is now possible because of the previous patch to call br_pass_frame_up last. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28bridge: Do br_pass_frame_up after other portsHerbert Xu
At the moment we deliver to the local bridge port via the function br_pass_frame_up before all other ports. There is no requirement for this. For the purpose of IGMP snooping, it would be more convenient if we did the local port last. Therefore this patch rearranges the bridge input processing so that the local bridge port gets to see the packet last (if at all). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28Bluetooth: Fix out of scope variable access in hci_sock_cmsg()Johann Felix Soden
The pointer data can point to the variable ctv. Access to data happens when ctv is already out of scope. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Add SCO fallback for unsupported feature errorStephen Coe
The Bluetooth SIG PTS test case: TC_AG_ACS_BV_10_I, rejects eSCO with "Unsupported Feature or Parameter Value" (0x11). This patch adds case for SCO fallback. 2007-09-20 12:20:37.787747 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 38 packets 1 2007-09-20 12:20:37.842154 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 38 voice setting 0x0060 2007-09-20 12:20:37.847037 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2007-09-20 12:20:37.855233 > HCI Event: Max Slots Change (0x1b) plen 3 handle 38 slots 1 2007-09-20 12:20:39.913354 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x11 handle 38 bdaddr 00:16:93:01:01:7A type eSCO Error: Unsupported Feature or Parameter Value 2007-09-20 12:20:39.922629 > HCI Event: Max Slots Change (0x1b) plen 3 handle 38 slots 5 2007-09-20 12:20:58.126886 < ACL data: handle 38 flags 0x02 dlen 8 L2CAP(d): cid 0x0041 len 4 [psm 0] 0000: 0b 53 01 b8 .S.. 2007-09-20 12:20:58.130138 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 38 packets 1 Signed-off-by: Stephen Coe <smcoe1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Add controller types for BR/EDR and 802.11 AMPMarcel Holtmann
With the Bluetooth 3.0 specification and the introduction of alternate MAC/PHY (AMP) support, it is required to differentiate between primary BR/EDR controllers and 802.11 AMP controllers. So introduce a special type inside HCI device for differentiation. For now all AMP controllers will be treated as raw devices until an AMP manager has been implemented. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Convert inquiry cache to use debugfs instead of sysfsMarcel Holtmann
The output of the inquiry cache is only useful for debugging purposes and so move it into debugfs. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27Bluetooth: Convert controller hdev->type to hdev->busMarcel Holtmann
The hdev->type is misnamed and should be actually hdev->bus instead. So convert it now. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-02-27rtnetlink: support specifying device flags on device creationPatrick McHardy
commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27dev: support deferring device flag change notificationsPatrick McHardy
Split dev_change_flags() into two functions: __dev_change_flags() to perform the actual changes and __dev_notify_flags() to invoke netdevice notifiers. This will be used by rtnl_link to defer netlink notifications until the device has been fully configured. This changes ordering of some operations, in particular: - netlink notifications are sent after all changes have been performed. As a side effect this surpresses one unnecessary netlink message when the IFF_UP and other flags are changed simultaneously. - The NETDEV_UP/NETDEV_DOWN and NETDEV_CHANGE notifiers are invoked after all changes have been performed. Their relative is unchanged. - net_dmaengine_put() is invoked before the NETDEV_DOWN notifier instead of afterwards. This should not make any difference since both RX and TX are already shut down at this point. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27rtnetlink: handle rtnl_link netlink notifications manuallyPatrick McHardy
In order to support specifying device flags during device creation, we must be able to roll back device registration in case setting the flags fails without sending any notifications related to the device to userspace. This patch changes rollback_registered_many() and register_netdevice() to manually send netlink notifications for devices not handled by rtnl_link and allows to defer notifications for devices handled by rtnl_link until setup is complete. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27rtnetlink: ignore NETDEV_PRE_UP notifier in rtnetlink_event()Patrick McHardy
Commit 3b8bcfd (net: introduce pre-up netdev notifier) added a new notifier which is run before a device is set UP for use by cfg80211. The patch missed to add the new notifier to the ignore list in rtnetlink_event(), so we currently get an unnecessary netlink notification before a device is set UP. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits) crypto: aes_generic - Fix checkpatch errors crypto: fcrypt - Fix checkpatch errors crypto: ecb - Fix checkpatch errors crypto: des_generic - Fix checkpatch errors crypto: deflate - Fix checkpatch errors crypto: crypto_null - Fix checkpatch errors crypto: cipher - Fix checkpatch errors crypto: crc32 - Fix checkpatch errors crypto: compress - Fix checkpatch errors crypto: cast6 - Fix checkpatch errors crypto: cast5 - Fix checkpatch errors crypto: camellia - Fix checkpatch errors crypto: authenc - Fix checkpatch errors crypto: api - Fix checkpatch errors crypto: anubis - Fix checkpatch errors crypto: algapi - Fix checkpatch errors crypto: blowfish - Fix checkpatch errors crypto: aead - Fix checkpatch errors crypto: ablkcipher - Fix checkpatch errors crypto: pcrypt - call the complete function on error ...
2010-02-26mac80211: fix direct probe loop on ieee80211_work_purgeJuuso Oikarinen
If authentication has already been performed when the WLAN interface is stopped, (sometimes) the ieee80211_work_purge would corrupt some ieee80211_work-structures. The outcome is this (cleaned up): [ 2252.398681] WARNING: at net/mac80211/work.c:995 ieee80211_work_purge [ 2252.466430] Backtrace: [ 2252.529266] (ieee80211_work_purge+0x0/0xcc [mac80211]) [ 2252.546875] (ieee80211_stop+0x0/0x4c0 [mac80211]) Additionally, one would get this, going on regarless of the WLAN interface state, going on forever: [ 2252.859985] wlan0: direct probe to 00:90:4c:60:04:00 (try -996717525) [ 2253.055419] wlan0: direct probe to 00:90:4c:60:04:00 (try -996717524) [ 2253.250610] wlan0: direct probe to 00:90:4c:60:04:00 (try -996717523) [ 2253.446014] wlan0: direct probe to 00:90:4c:60:04:00 (try -996717522) [ 2253.641357] wlan0: direct probe to 00:90:4c:60:04:00 (try -996717521) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-26mac80211: use listen interval 5 as defaultHelmut Schaa
Currently if a driver does not set hw.max_listen_interval a listen interval of 1 is negotiated with the AP. Thus, the AP could drop buffered frames for us after just one beacon interval which can easily happen with the current powersave and scan implementation. To avoid this issue increase the default interval to 5 which should be a reasonable safe default. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-26Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h net/mac80211/rate.c
2010-02-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-02-26netfilter: xtables: restore indentationJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-26netfilter: nfnetlink_log: fix silly refcount leakAlexey Dobriyan
Quick fix for memory/module refcount leak. Reference count of listener instance never reaches 0. Start/stop of ulogd2 is enough to trigger this bug! Now, refcounting there looks very fishy in particular this code: if (!try_module_get(THIS_MODULE)) { ... and creation of listener instance with refcount 2, so it may very well be ripped and redone. :-) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-26IPVS: ip_vs_lblcr: use list headASimon Horman
Use list_head rather than a custom list implementation. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-26Revert "ethtool: Add n-tuple string length to drvinfo and return it"David S. Miller
This reverts commit c79c5ffdce14abb4de3878c5aa8c3c6e5093c69b. As Jeff points out we can't break the user visible interface like this, we need to add this into the reserved[] thing. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26ipv6: Use 1280 as min MTU for ipv6 forwardingUlrich Weber
Clients will set their MTU to 1280 if they receive a ICMPV6_PKT_TOOBIG message with an MTU less than 1280. To allow encapsulating of packets over a 1280 link we should always accept packets with a size of 1280 for forwarding even if the path has a lower MTU and fragment the encapsulated packets afterwards. In case a forwarded packet is not going to be encapsulated a ICMPV6_PKT_TOOBIG msg will still be send by ip6_fragment() with the correct MTU. Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26net: add addr len check to dev_mc_addJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26ethtool: Add n-tuple string length to drvinfo and return itPeter Waskiewicz
The drvinfo struct should include the number of strings that get_rx_ntuple will return. It will be variable if an underlying driver implements its own get_rx_ntuple routine, so userspace needs to know how much data is coming. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26netdev: use list_first_entry macrostephen hemminger
Use list_first_entry macro; no longer any need to use 'next' directly in list to find first entry. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26rtnetlink: clean up SR-IOV config interfaceWilliams, Mitch A
This patch consists of a few minor cleanups to the SR-IOV configurion code in rtnetlink. - Remove unneccesary lock - Remove unneccesary casts - Return correct error code for no driver support These changes are based on comments from Patrick McHardy Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26af_packet: do not accept mc address smaller then dev->addr_len in ↵Jiri Pirko
packet_mc_add() There is no point of accepting an address of smaller length than dev->addr_len here. Therefore change this for stonger check. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26ipv6: Remove IPV6_ADDR_RESERVEDUlrich Weber
RFC 4291 section 2.4 states that all uncategorized addresses should be considered as Global Unicast. This will remove IPV6_ADDR_RESERVED completely and return IPV6_ADDR_UNICAST in ipv6_addr_type() instead. Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h drivers/net/wireless/rt2x00/rt2800pci.c
2010-02-25Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (41 commits) HID: usbhid: initialize interface pointers early enough HID: extend mask for BUTTON usage page HID: hid-ntrig: Single touch mode tap HID: hid-ntrig: multitouch cleanup and fix HID: n-trig: remove unnecessary tool switching HID: hid-ntrig add multi input quirk and clean up HID: usbhid: introduce timeout for stuck ctrl/out URBs HID: magicmouse: coding style and probe failure fixes HID: remove MODULE_VERSION from new drivers HID: fix up Kconfig entry for MagicMouse HID: add a device driver for the Apple Magic Mouse. HID: Export hid_register_report HID: Support for MosArt multitouch panel HID: add pressure support for the Stantum multitouch panel HID: fixed bug in single-touch emulation on the stantum panel HID: fix typo in error message HID: add mapping for "AL Network Chat" usage HID: use multi input quirk for TouchPack touchscreen HID: make full-fledged hid-bus drivers properly selectable HID: make Wacom modesetting failures non-fatal ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 22:09:20 +0000