| Age | Commit message (Collapse) | Author |
|---|
|
The warning messages about old objcopy and local functions spam the
user quite drastically. Remove the warning until we can find a nicer
way of tell the user to upgrade their objcopy.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
CHK include/linux/version.h
CHK include/linux/utsrelease.h
CC scripts/mod/empty.o
/bin/sh: /usr/src/25/scripts/recordmcount.pl: Permission denied
We shouldn't assume that files have their `x' bits set. There are various
ways in which file permissions get lost, including use of patch(1).
It might not be correct to assume that perl lives in $PATH?
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The --globalize-symbols option came out in objcopy version 2.17.
If the kernel is being compiled on a system with a lower version of
objcopy, then we can not use the globalize / localize trick to
link to symbols pointing to local functions.
This patch tests the version of objcopy and will only use the trick
if the version is greater than or equal to 2.17. Otherwise, if an
object has only local functions within a section, it will give a
nice warning and recommend the user to upgrade their objcopy.
Leaving the symbols unrecorded is not that big of a deal, since the
mcount record method changes the actual mcount code to be a simple
"ret" without recording registers or anything.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
During tests and checks, I've discovered that there were failures to
convert mcount callers into nops. Looking deeper into these failures,
code that was attempted to be changed was not an mcount caller.
The current code only updates if the code being changed is what it expects,
but I still investigate any time there is a failure.
What was happening is that a weak symbol was being used as a reference
for other mcount callers. That weak symbol was also referenced elsewhere
so the offsets were using the strong symbol and not the function symbol
that it was referenced from.
This patch changes the setting up of the mcount_loc section to search
for a global function that is not weak. It will pick a local over a weak
but if only a weak is found in a section, a warning is printed and the
mcount location is not recorded (just to be safe).
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
I'm trying to keep all the arch changes in recordmcount.pl in one place.
I moved your code into that area, by adding the flags to the commands
that were passed in.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
I'm seeing when I use separate src/build dirs:
make[3]: *** [arch/x86/kernel/time_32.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/irq_32.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/ldt.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
make[3]: *** [arch/x86/kernel/i8259.o] Error 1
/bin/sh: scripts/recordmcount.pl: No such file or directory
This fixes it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
hack around:
ld: Relocatable linking with relocations from format elf32-i386 (init/.tmp_gl_calibrate.o) to format elf64-x86-64 (init/.tmp_mx_calibrate.o) i CC arch/x86/mm/extable.o
objcopy: 'init/.tmp_mx_calibrate.o': No such file
rm: cannot remove `init/.tmp_mx_calibrate.o': No such file or directory
ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/extable.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_extable.o) is not supported
mv: cannot stat `arch/x86/mm/.tmp_mx_extable.o': No such file or directory
ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/fault.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_fault.o) is not supported
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch creates a section in the kernel called "__mcount_loc".
This will hold a list of pointers to the mcount relocation for
each call site of mcount.
For example:
objdump -dr init/main.o
[...]
Disassembly of section .text:
0000000000000000 <do_one_initcall>:
0: 55 push %rbp
[...]
000000000000017b <init_post>:
17b: 55 push %rbp
17c: 48 89 e5 mov %rsp,%rbp
17f: 53 push %rbx
180: 48 83 ec 08 sub $0x8,%rsp
184: e8 00 00 00 00 callq 189 <init_post+0xe>
185: R_X86_64_PC32 mcount+0xfffffffffffffffc
[...]
We will add a section to point to each function call.
.section __mcount_loc,"a",@progbits
[...]
.quad .text + 0x185
[...]
The offset to of the mcount call site in init_post is an offset from
the start of the section, and not the start of the function init_post.
The mcount relocation is at the call site 0x185 from the start of the
.text section.
.text + 0x185 == init_post + 0xa
We need a way to add this __mcount_loc section in a way that we do not
lose the relocations after final link. The .text section here will
be attached to all other .text sections after final link and the
offsets will be meaningless. We need to keep track of where these
.text sections are.
To do this, we use the start of the first function in the section.
do_one_initcall. We can make a tmp.s file with this function as a reference
to the start of the .text section.
.section __mcount_loc,"a",@progbits
[...]
.quad do_one_initcall + 0x185
[...]
Then we can compile the tmp.s into a tmp.o
gcc -c tmp.s -o tmp.o
And link it into back into main.o.
ld -r main.o tmp.o -o tmp_main.o
mv tmp_main.o main.o
But we have a problem. What happens if the first function in a section
is not exported, and is a static function. The linker will not let
the tmp.o use it. This case exists in main.o as well.
Disassembly of section .init.text:
0000000000000000 <set_reset_devices>:
0: 55 push %rbp
1: 48 89 e5 mov %rsp,%rbp
4: e8 00 00 00 00 callq 9 <set_reset_devices+0x9>
5: R_X86_64_PC32 mcount+0xfffffffffffffffc
The first function in .init.text is a static function.
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
The lowercase 't' means that set_reset_devices is local and is not exported.
If we simply try to link the tmp.o with the set_reset_devices we end
up with two symbols: one local and one global.
.section __mcount_loc,"a",@progbits
.quad set_reset_devices + 0x10
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
U set_reset_devices
We still have an undefined reference to set_reset_devices, and if we try
to compile the kernel, we will end up with an undefined reference to
set_reset_devices, or even worst, it could be exported someplace else,
and then we will have a reference to the wrong location.
To handle this case, we make an intermediate step using objcopy.
We convert set_reset_devices into a global exported symbol before linking
it with tmp.o and set it back afterwards.
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 T set_reset_devices
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 T set_reset_devices
00000000000000a8 t __setup_set_reset_devices
000000000000105f t __setup_str_set_reset_devices
0000000000000000 t set_reset_devices
Now we have a section in main.o called __mcount_loc that we can place
somewhere in the kernel using vmlinux.ld.S and access it to convert
all these locations that call mcount into nops before starting SMP
and thus, eliminating the need to do this with kstop_machine.
Note, A well documented perl script (scripts/recordmcount.pl) is used
to do all this in one location.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
'x86/memory-corruption-check', 'x86/early-printk', 'x86/xsave', 'x86/ptrace-v2', 'x86/quirks', 'x86/setup', 'x86/spinlocks' and 'x86/signal' into x86/core-v2
|
|
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (27 commits)
[S390] Fix checkstack for s390
[S390] fix initialization of stp
[S390] 3215: Remove tasklet.
[S390] console flush on panic / reboot
[S390] introduce dirty bit for kvm live migration
[S390] Add ioctl support for EMC Symmetrix Subsystem Control I/O
[S390] xpram: per device block request queues.
[S390] dasd: fix message flood for unsolicited interrupts
[S390] Move private simple udelay function to arch/s390/lib/delay.c.
[S390] dcssblk: add >2G DCSSs support and stacked contiguous DCSSs support.
[S390] ptrace changes
[S390] s390: use sys_pause for 31bit pause entry point
[S390] qdio enhanced SIGA (iqdio) support.
[S390] cio: fix cio_tpi.
[S390] cio: Correct use of ! and &
[S390] cio: inline assembly cleanup
[S390] bus_id -> dev_set_name() for css and ccw busses
[S390] bus_id ->dev_name() conversions in qdio
[S390] Use s390_root_dev_* in kvm_virtio.
[S390] more bus_id -> dev_name conversions
...
|
|
With -march=z990 and later gcc can use the long displacement facility
insruction lay for stack register handling. This patch adopts checkstack
to catch lay in addition to ahi and aghi.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
|
|
* Theodore Ts'o (tytso@mit.edu) wrote:
>
> I've been playing with adding some markers into ext4 to see if they
> could be useful in solving some problems along with Systemtap. It
> appears, though, that as of 2.6.27-rc8, markers defined in code which is
> compiled directly into the kernel (i.e., not as modules) don't show up
> in Module.markers:
>
> kvm_trace_entryexit arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-intel %u %p %u %u %u %u %u %u
> kvm_trace_entryexit arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-amd %u %p %u %u %u %u %u %u
>
> (Note the lack of any of the kernel_sched_* markers, and the markers I
> added for ext4_* and jbd2_* are missing as wel.)
>
> Systemtap apparently depends on in-kernel trace_mark being recorded in
> Module.markers, and apparently it's been claimed that it used to be
> there. Is this a bug in systemtap, or in how Module.markers is getting
> built? And is there a file that contains the equivalent information
> for markers located in non-modules code?
I think the problem comes from "markers: fix duplicate modpost entry"
(commit d35cb360c29956510b2fe1a953bd4968536f7216)
Especially :
- add_marker(mod, marker, fmt);
+ if (!mod->skip)
+ add_marker(mod, marker, fmt);
}
return;
fail:
Here is a fix that should take care if this problem.
Thanks for the bug report!
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Tested-by: "Theodore Ts'o" <tytso@mit.edu>
CC: Greg KH <greg@kroah.com>
CC: David Smith <dsmith@redhat.com>
CC: Roland McGrath <roland@redhat.com>
CC: Sam Ravnborg <sam@ravnborg.org>
CC: Wenji Huang <wenji.huang@oracle.com>
CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit f072181e6403b0fe2e2aa800a005497b748fd284 ("kconfig: drop the
""trying to assign nonexistent symbol" warning") simply dropped the
warnings, but it does a little more than that, it also marks the current
.config as needed saving, so add this back.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Recent changes to oldconfig have mixed up the silentoldconfig handling,
so this fixes that by clearly separating that special mode, e.g.
KCONFIG_NOSILENTUPDATE is only relevant here, the .config is written as
needed.
This will also properly close Bug 11230.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Struct members may be marked as private by using
/* private: */
before them, as noted in Documentation/kernel-doc-nano-HOWTO.txt
Fix kernel-doc to handle structs whose members are all private;
otherwise invalid XML is generated:
xmlto: input does not validate (status 3)
linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml:146: element variablelist: validity error : Element variablelist content does not follow the DTD, expecting ((title , titleabbrev?)? , varlistentry+), got ()
Document linux-2.6.27-rc6-git4/Documentation/DocBook/debugobjects.xml does not validate
make[1]: *** [Documentation/DocBook/debugobjects.html] Error 3
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Roland McGrath <roland@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
David Sanders wrote:
> I'm getting this error:
> as: unrecognized option `-mtune=generic32'
> I have binutils 2.17.
Use -c instead of -S in cc-option and cc-option-yn, so we can probe
options related to the assembler.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: kbuild devel <kbuild-devel@lists.sourceforge.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add gitignore file for scripts/selinux/mdp/mdp.
Signed-off-by: James Morris <jmorris@namei.org>
|
|
|
|
In August 2006 I posted a patch generating a minimal SELinux policy. This
week, David P. Quigley posted an updated version of that as a patch against
the kernel. It also had nice logic for auto-installing the policy.
Following is David's original patch intro (preserved especially
bc it has stats on the generated policies):
se interested in the changes there were only two significant
changes. The first is that the iteration through the list of classes
used NULL as a sentinel value. The problem with this is that the
class_to_string array actually has NULL entries in its table as place
holders for the user space object classes.
The second change was that it would seem at some point the initial sids
table was NULL terminated. This is no longer the case so that iteration
has to be done on array length instead of looking for NULL.
Some statistics on the policy that it generates:
The policy consists of 523 lines which contain no blank lines. Of those
523 lines 453 of them are class, permission, and initial sid
definitions. These lines are usually little to no concern to the policy
developer since they will not be adding object classes or permissions.
Of the remaining 70 lines there is one type, one role, and one user
statement. The remaining lines are broken into three portions. The first
group are TE allow rules which make up 29 of the remaining lines, the
second is assignment of labels to the initial sids which consist of 27
lines, and file system labeling statements which are the remaining 11.
In addition to the policy.conf generated there is a single file_contexts
file containing two lines which labels the entire system with base_t.
This policy generates a policy.23 binary that is 7920 bytes.
(then a few versions later...):
The new policy is 587 lines (stripped of blank lines) with 476 of those
lines being the boilerplate that I mentioned last time. The remaining
111 lines have the 3 lines for type, user, and role, 70 lines for the
allow rules (one for each object class including user space object
classes), 27 lines to assign types to the initial sids, and 11 lines for
file system labeling. The policy binary is 9194 bytes.
Changelog:
Aug 26: Added Documentation/SELinux.txt
Aug 26: Incorporated a set of comments by Stephen Smalley:
1. auto-setup SELINUXTYPE=dummy
2. don't auto-install if selinux is enabled with
non-dummy policy
3. don't re-compute policy version
4. /sbin/setfiles not /usr/sbin/setfiles
Aug 22: As per JMorris comments, made sure make distclean
cleans up the mdp directory.
Removed a check for file_contexts which is now
created in the same file as the check, making it
superfluous.
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
With 22454cb99fc39f2629ad06a7eccb3df312f8830e we added only the
first entry of the device table. We need to loop over the whole
device list.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
scripts/patch-kernel script can't patch a tree, say, from 2.6.25 to
2.6.26.1, because of a wrong comparison in context of patching 2.6.x base.
Fix it.
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Fix handling of nested structs or unions. The regex to strip (eliminate)
nested structs or unions was limited to only 0 or 1 matches. This can
cause an uneven number of left/right braces to be stripped, which causes
this:
Warning(linux-2.6.27-rc1-git2//include/net/mac80211.h:336): No description found for parameter '}'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kconfig: drop the ""trying to assign nonexistent symbol" warning
kconfig: always write out .config
|
|
They really stand out now that make *config is less chatty - and
they are generally ignored - so drop them.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Adrian Bunk <bunk@kernel.org>
|
|
Always write out .config also in the case where config
did not change.
This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11230
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: Adrian Bunk <bunk@kernel.org>
|
|
People don't like them and think they're errors.
Leave the __fw_install one though; when 'make firmware_install' does
nothing, it's best to have a 'Nothing to be done for...' message rather
than just doing nothing.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
It would have saved both a bug submitter and me a few hours if
scripts/ver_linux had picked the same gcc as the build.
Since I can't see any reason why it fiddles with PATH at all this patch
therefore removes the PATH setting.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
The extern flag currently is not included in type dump files
(genksyms --dump-types). Include that flag there for completeness.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
We are having two kinds of problems with genksyms today: fake checksum
changes without actual ABI changes, and changes which we would rather like
to ignore (such as an additional field at the end of a structure that
modules are not supposed to touch, for example).
I have thought about ways to improve genksyms and compute checksums
differently to avoid those problems, but in the end I don't see a
fundamentally better way. So here are some genksyms patches for at least
making the checksums more easily manageable, if we cannot fully fix them.
In addition to the bugfixes (the first two patches), this allows genksyms
to track checksum changes and report why a checksum changed (third patch),
and to selectively ignore changes (fourth patch).
This patch:
Gcc __attribute__ definitions may occur repeatedly, e.g.,
static int foo __attribute__((__used__))
__attribute__((aligned (16)));
The genksyms parser does not understand this, and generates a syntax error.
Fix this case.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
gcc 4.3 correctly determines that input() is unused and gives the
following warning:
<-- snip -->
...
HOSTCC scripts/genksyms/lex.o
scripts/genksyms/lex.c:1487: warning: ‘input’ defined but not used
...
<-- snip -->
Fix it by adding %option noinput to scripts/genksyms/lex.l and
regeneration of scripts/genksyms/lex.c_shipped.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
gcc 4.3 correctly determines that input() is unused and gives the
following warning:
<-- snip -->
...
HOSTCC scripts/kconfig/zconf.tab.o
scripts/kconfig/lex.zconf.c:1628: warning: ‘input’ defined but not used
...
<-- snip -->
Fix it by adding %option noinput to scripts/kconfig/zconf.l and
regeneration of scripts/kconfig/lex.zconf.c_shipped.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Spelling fixes in scripts/mod/modpost.c
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
setlocalversion: do not describe if there is nothing to describe
kconfig: fix typos: "Suport" -> "Support"
kconfig: make defconfig is no longer chatty
kconfig: make oldconfig is now less chatty
kconfig: speed up all*config + randconfig
kconfig: set all new symbols automatically
kconfig: add diffconfig utility
kbuild: remove Module.markers during mrproper
kbuild: sparse needs CF not CHECKFLAGS
kernel-doc: handle/strip __init
vmlinux.lds: move __attribute__((__cold__)) functions back into final .text section
init: fix URL of "The GNU Accounting Utilities"
kbuild: add arch/$ARCH/include to search path
kbuild: asm symlink support for arch/$ARCH/include
kbuild: support arch/$ARCH/include for tags, cscope
kbuild: prepare headers_* for arch/$ARCH/include
kbuild: install all headers when arch is changed
kbuild: make clean removes *.o.* as well
kbuild: optimize headers_* targets
kbuild: only one call for include/ in make headers_*
...
|
|
Jan Engelhardt wrote:
> Just a note that when you run git-describe, you should probably quiten it.
>
> fatal: cannot describe 'bd7364a0fd5a4a2878fe4a224be1b142a4e6698e'
>
> This happens when tags are not present, which can happen if Linus's tree
> is sent upwards again, IOW:
>
> machine1$ git-clone torvalds/linux-2.6.git
> machine1$ git push elsewhere master
>
> machine2$ git-clone elsewhere:/linux
> machine2$ git-describe HEAD
> fatal: cannot describe that
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Acked-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
make defconfig generated a lot of output
then noone actually read.
Use conf_set_all_new_symbols() to generate the default
configuration and avoid the chatty output.
A typical run now looks like this:
$ make defconfig
*** Default configuration is based on 'i386_defconfig'
arch/x86/configs/i386_defconfig:13:warning: trying to assign nonexistent symbol SEMAPHORE_SLEEPERS
arch/x86/configs/i386_defconfig:176:warning: trying to assign nonexistent symbol PREEMPT_BKL
...
arch/x86/configs/i386_defconfig:1386:warning: trying to assign nonexistent symbol INSTRUMENTATION
$
As an added benefit we now clearly see the warnings generated
in the start of the process.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
|
|
Previously when running "make oldconfig" we saw all the propmt lines
from kconfig and noone actully read this.
With this patch the user will only see output if there is new symbols.
This will be seen as "make oldconfig" runs which does not generate any output.
A typical run now looks like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
$
If a new symbol is found then we restart the config process like this:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*
* Restart config...
*
*
* General setup
*
Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y
Local version - append to kernel release (LOCALVERSION) []
...
The bahaviour is similar to what we know when running the implicit
oldconfig target "make silentoldconfig".
"make silentoldconfig" are run as part of the kernel build process
if the configuration has changed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
|
|
Drop the chatty mode when we generate the all*config, randconfig
configurations.
Ths speeds up the process considerably and noone looked
at the output anyway.
This patch uses the conf_set_all_new_symbols() function
just added to kconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
|
|
Add conf_set_all_new_symbols() which set all symbols (which don't have a
value yet) to a specifed value.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Diffconfig is a simple utility for comparing two kernel configuration files.
See usage in the script for more info.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Handle __init in functions with kernel-doc notation by stripping the
__init away from the output doc. This is already being done for
"__devinit". This patch fixes these kernel-doc error/aborts:
Error(linux-next-20080619//drivers/usb/gadget/config.c:132): cannot understand prototype: 'struct usb_descriptor_header **__init usb_copy_descriptors(struct usb_descriptor_header **src) '
Error(linux-next-20080619//drivers/usb/gadget/config.c:182): cannot understand prototype: 'struct usb_endpoint_descriptor *__init usb_find_endpoint( struct usb_descriptor_header **src, struct usb_descriptor_header **copy, struct usb_endpoint_descriptor *match ) '
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Factor out the headers_*_all support to a seperate
shell script and add support for arch specific
header files can be located in either
arch/$ARCH/include/asm
or
include/asm-$ARCH/
In "make help" always display the headers_* targets.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
We see some header files that are selected dependent on
the actual architecture so force a reinstallation
of all header files when the arch changes.
This slows down "make headers_check_all" but then
we better reflect reality.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Move the core functionality of headers_install
and headers_check to two small perl scripts.
The makefile is adapted to use the perl scrip and
changed to operate on all files in a directory.
So if one file is changed then all files in the
directory is processed.
perl were chosen for the helper scripts because this
is pure text processing which perl is good at and
especially the headers_check.pl script are expected to
see changes / new checks implmented.
The speed is ~300% faster on this box.
And the output generated to the screen is now down to
two lines per directory (one for install, one for check)
so it is easier to scroll back after a kernel build.
The perl scripts has been brought to sanity by patient
feedback from: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Move it to the top-level file to decide if we install/check
the generic headers or the arch specific headers.
This revealed a long standing bug where "make headers_check_all"
relied on the files in asm/ for the current architecture.
So make headers_check_all is now broken by this commit.
In addition:
o add a simpler way to detect if an arch support
exporting header files.
o add 'set -e;' so we error out early if
make headers_check_all fails.
o add sparc64 and cris to arch we do not process
in make headers_*_all because:
sparc64 - use sparc to export headers
cris - is know seriously broken
Includes suggestions from: David Woodhouse
<dwmw2@infradead.org>.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
|
|
No functional changes just improved readability
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
ALTARCH is no longer used by any arch(*) so drop
support for this from Makefile.headerinst
Dropping ALTARCH support simplifies Makefile.headerinst
(*) sparc64 uses it but work is ongoing to drop it
and no furter usage is planned.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David Miller <davem@davemloft.net>
|
|
unifdef utility is fast enough to warrant that we always
run the scripts through unifdef.
This patch runs all headers listed with header-y and unifdef-y
through unifdef.
Next step is to drop unifdef-y in all Kbuild files and
that can now be done in smaller steps.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Adrian Bunk <bunk@kernel.org>
|
|
* git://git.infradead.org/~dwmw2/random-2.6:
remove dummy asm/kvm.h files
firmware: create firmware binaries during 'make modules'.
|
|
This means that we no longer need write access to the source tree while
doing 'make modules_install'.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
