| Age | Commit message (Collapse) | Author |
|---|
|
Impact: no default -fno-stack-protector if stackp is enabled, cleanup
Stackprotector make rules had the following problems.
* cc support test and warning are scattered across makefile and
kernel/panic.c.
* -fno-stack-protector was always added regardless of configuration.
Update such that cc support test and warning are contained in makefile
and -fno-stack-protector is added iff stackp is turned off. While at
it, prepare for 32bit support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: fix link failure on certain toolchains with specific configs
Recent percpu change made x86_64 split .data.init section into three
separate segments - data.init, percpu and data.init2. data.init2 gets
.data.nosave and .bss.* and is followed by .notes segment. Depending
on configuration both segments might contain no data, in which case
the tool chain makes the section header to contain offset beyond the
end of the file.
modpost isn't too happy about it and fails build - as reported by
Pawel Dziekonski:
Building modules, stage 2.
MODPOST 416 modules
FATAL: vmlinux is truncated. sechdrs[i].sh_offset=10354688 >
sizeof(*hrd)=64
make[1]: *** [__modpost] Error 1
Teach modpost that NOBITS section may point beyond the end of the file
and that .modinfo can't be NOBITS.
Reported-by: Pawel Dziekonski <dzieko@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
tracing/core
|
|
The check for references to CONFIG_ symbols in exported headers turned
out to be too agressive with the current state of affairs.
After the work of Jaswinder to clean up all relevant cases we are down
to almost pure noise.
So lets drop the check for now - we can always add it back later
should our headers be ready for that.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: fix kbuild.txt typos
kbuild: print usage with no arguments in scripts/config
Revert "kbuild: strip generated symbols from *.ko"
|
|
Based on a patch from Brian, who identified the issue.
Signed-off-by: Bryan Kadzban <bryan@kadzban.is-a-geek.net>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Impact: fix failure of dynamic function tracer selftest
In a course of development, a developer does several makes on their
kernel. Sometimes, the make might do something abnormal. In the
case of running the recordmcount.pl script on an object twice,
the script will duplicate all the calls to mcount in the __mcount_loc
section.
On boot up, the dynamic function tracer is careful when it modifies
code, and performs several consistency checks. One is to not modify
the call site if it is not what it expects it to be. If a function
call site is listed twice, the first entry will convert the site
to a nop, and the second will fail because it expected to see a
call to mcount, but instead it sees a nop. Thus, the function tracer
is disabled.
Eric Sesterhenn reported seeing:
[ 1.055440] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 1.055568] ftrace: allocating 29418 entries in 116 pages
[ 1.061000] ------------[ cut here ]------------
[ 1.061000] WARNING: at kernel/trace/ftrace.c:441
[...]
[ 1.060000] ---[ end trace 4eaa2a86a8e2da23 ]---
[ 1.060000] ftrace failed to modify [<c0118072>] check_corruption+0x3/0x2d
[ 1.060000] actual: 0f:1f:44:00:00
This warning shows that check_corruption+0x3 already had a nop in
its place (0x0f1f440000). After compiling another kernel the problem
went away.
Later Eric Paris notice the same type of issue. Luckily, he saved
the vmlinux file that caused it. In the file we found a bunch of
duplicate mcount call site records, which lead us to the script.
Perhaps this problem only happens to people named Eric.
This patch changes the script to test if the __mcount_loc already
exists in the object file, and if it does, it will print out
an error message and kill the compile.
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
|
|
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the general use case struct seq_operations should be a const object.
Check for and warn where it is not.
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We should not be continuing a braced section with an if, for example:
if (...) {
} if (...) {
}
Detect this and suggest adding a newline.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we allow return to have surrounding parentheses when containing
comparison operators we are not correctly handling the case where the
values contain array sufffixes. Squash them.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We should not be complaining about the prefix spacing for types and casts.
We are triggering here because the check for spacing between '*'s is
overly loose. Tighten this up.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the #if opening statement is not in the context then the context stack
can be empty. Handle this by ensuring there is always a blank entry in
the stack.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Tested-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Requested by Sam.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This reverts commit ad7a953c522ceb496611d127e51e278bfe0ff483.
And commit: ("allow stripping of generated symbols under CONFIG_KALLSYMS_ALL")
9bb482476c6c9d1ae033306440c51ceac93ea80c
These stripping patches has caused a set of issues:
1) People have reported compatibility issues with binutils due to
lack of support for `--strip-unneeded-symbols' with objcopy 2.15.92.0.2
Reported by: Wenji
2) ccache and distcc no longer works as expeced
Reported by: Ted, Roland, + others
3) The installed modules increased a lot in size
Reported by: Ted, Davej + others
Reported-by: Wenji Huang <wenji.huang@oracle.com>
Reported-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Add recordmcount for ia64.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
In IA64, a function pointer isn't a 'unsigned long' but a
'struct {unsigned long ip, unsigned long gp}'. MCOUNT_ADDR is determined
at link time not compile time, so explictly ignore kernel/trace/ftrace.o
in recordmcount.pl.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
In IA64, module build and kernel build use different option.
Make recordmcount.pl differentiate the two cases.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
There has been some light flamewar on lkml about decoding oopses
in modules (as part of the crashdump flamewar).
Now this isn't rocket science, just the markup_oops.pl script
cheaped out and didn't handle modules. But really; a flamewar
all about that?? What happened to C++ in the kernel or reading
files from inside the kernel?
This patch adds module support to markup_oops.pl; it's not the
most pretty perl but it works for my testcases...
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It is useful for diagnosing boot performance to see where async function
calls are waiting on serialization... this patch adds this
functionality to the bootgraph.pl script.
The waiting time is shown as a half transparent, gray bar through the
block that is waiting.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Conflicts:
init/do_mounts_rd.c
|
|
I often change single options in .config files. Instead of using
an editor or one of the frontends it's convenient to do this from
the command line. It's also useful to do from automated build scripts
when building different variants from a base config file.
I extracted most of the CONFIG manipulation code from one of my
build scripts into a new shell script scripts/config
The script is not integrated with the normal Kconfig machinery
and doesn't do any checking against Kconfig files, but just manipulates
that text format. This is always done at make time anyways.
I believe this script would be a useful standard addition for scripts/*
Sample usage:
./scripts/config --disable smp
Disable SMP in .config file
./scripts/config --file otherdir/.config --module e1000e
Enable E1000E as module in otherdir/.config
./scripts/config --state smp
y
Check state of config option CONFIG_SMP
After merging into git please make scripts/config executable
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
This patch reintroduce the ALLSOURCE_ARCHS support for tags/TAGS/
cscope targets. The Kbuild previously has this feature, but after
moving the targets into scripts/tags.sh, ALLSOURCE_ARCHS disappears.
It's something like this:
$ make ALLSOURCE_ARCHS="x86 mips arm" tags cscope
Signed-off-by: Jike Song <albcamus@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Dave Jones, in his blog, had some feedback about the bootchart script:
Primarily his complaint was that shorter delays weren't visualized.
The reason for that was that too small delays will have their labels
mixed up in the graph in an unreadable mess.
This patch has a fix for this; for one, it makes the output wider,
so more will fit.
The second part is that smaller delays are now shown with a
much smaller font for the label; while this isn't per se
readable at a 1:1 zoom, at least you can zoom in with most SVG
viewing applications and see what it is you are looking at.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Rafael reported:
I get the following error from 'make modules_install' on my test boxes:
HOSTCC firmware/ihex2fw
/home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system
compilation terminated.
make[3]: *** [firmware/ihex2fw] Error 1
make[2]: *** [_modinst_post] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
where the configuration is that the kernel is compiled on a build box
with 'make O=<destdir> -j5' and then <destdir> is mounted over NFS read-only by
each test box (full path to this directory is the same on the build box and on
the test boxes). Then, I cd into <destdir>, run 'make modules_install' and get
the error above.
The issue turns out to be that we when we install firmware pick
up the list of firmware blobs from firmware/Makefile.
And this triggers the Makefile rules to update ihex2fw.
There were two solutions for this issue:
1) Move the list of firmware blobs to a separate file
2) Avoid ihex2fw rebuild by moving it to scripts
As I seriously beleive that the list of firmware blobs should be
done in a fundamental different way solution 2) was selected.
Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
|
|
Impact: Resolves build failures in some configurations
Makes it possible to disable CONFIG_RD_GZIP . In that case, the
built-in initramfs will be compressed by whatever compressor is
available (bzip2 or lzma) or left uncompressed if none is available.
It also removes a couple of warnings which occur when no ramdisk
compression at all is chosen.
It also restores the select ZLIB_INFLATE in drivers/block/Kconfig
which somehow came missing. This is needed to activate compilation of
the stuff in zlib_deflate.
Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clean up checkpatch using perlcritic.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the general use case struct file_operations should be a const object.
Check for and warn where it is not. As suggested by Steven and Ingo.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When checking for assignments within if conditionals we check the whole of
the condition, but the match is performed using a line constrained regular
expression. This means we can miss split conditionals or those on the
second line. Allow the check to span lines.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ensure we do not report identifiers containing the word static as static
declarations. For example this should not be reported as an unecessary
assignement of 0:
long nr_static = 0;
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When picking up a complete statement or block for analysis we cannot
simply track open/close/etc parenthesis we must take into account
preprocessor section boundaries.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We are miscategorising a continuation fragment following an operator
which may lead to us thinking that there is a space after it when there is
not. Fix this up.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Loosen spacing checks to correctly detect this valid use of a typedef:
typedef struct rcu_data *(*get_data_func)(int);
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Seems like every other release we have someone who updates vmlinux.lds.h
and adds C-visible symbols without VMLINUX_SYMBOL() around them. So start
checking the file and reject assignments which have plain symbols on
either side.
[apw@canonical.com: soften the check, add tests]
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It seems to be a common idiom to include braces on conditionals in all
contexts including return. Allow this exception to the return is not a
function checks. Reported by Kay Sievers.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some people work internally with -p0-patches which has the danger that one
forgets to convert them to -p1 before mainlining. Bitten myself and seen
p0-patches in mailing lists occasionally, this patch adds a warning to
checkpatch.pl in case a patch is -p0. If you really want, you can fool
this check to generate false positives, this is why it just spits a
warning. Making the check 100% proof is trickier than it looks, so let's
start with a version which catches the cases of real use.
[apw@canonical.com: update message language, handle null prefix, add tests]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Disallow spaces within multiple pointer stars (*) in both casts and
definitions. Both of these would now be reported:
(char * *)
char * *foo;
Also now consistently detects and reports the attributes within these
structures making the error report itself clearer.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we are detecting whether a comment is open when we start a hunk we
check for the first comment edge in the hunk and assume its inverse.
However if the hunk contains something like below, then we will assume
that a comment was open. Update this heuristic to see if the comment edge
is obviously within double quotes and ignore it if so:
foo(" */);
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Detect the colons (:) which make up secondary bitfield declarations and
apply binary colon checks. For example the following is common idiom:
int foo:1,
bar:1;
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add __weak as an official attribute. This tends to be used in a location
where the automated attribute detector misses it.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ensure we do not trigger the complex macros checks on structure member
assignment, for example:
#define foo .bar = 10
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some people use double star '**' as a comment continuation, and start
comments with complete lines of stars. Widen the implied comment
detection to pick these up.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When detecting implied comments from leading stars we may incorrectly
think we have detected an edge one way or the other when we have not if we
drop off the end of the last hunk. Fix this up.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
in_atomic() is not for driver use so report any such use as an ERROR.
Also in_atomic() is often used to determine if we may sleep, but it is not
reliable in this use model therefore strongly discourage its use.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We're struggling all the time to figure out where the code came from that
oopsed.. The script below (a adaption from a script used by
kerneloops.org) can help developers quite a bit, at least for non-module
cases.
It works and looks like this:
[/home/arjan/linux]$ dmesg | perl scripts/markup_oops.pl vmlinux
{
struct agp_memory *memory;
memory = agp_allocate_memory(agp_bridge, pg_count, type);
c055c10f: 89 c2 mov %eax,%edx
if (memory == NULL)
c055c111: 74 19 je c055c12c <agp_allocate_memory_wrap+0x30>
/* This function must only be called when current_controller != NULL */
static void agp_insert_into_pool(struct agp_memory * temp)
{
struct agp_memory *prev;
prev = agp_fe.current_controller->pool;
c055c113: a1 ec dc 8f c0 mov 0xc08fdcec,%eax
*c055c118: 8b 40 10 mov 0x10(%eax),%eax <----- faulting instruction
if (prev != NULL) {
c055c11b: 85 c0 test %eax,%eax
c055c11d: 74 05 je c055c124 <agp_allocate_memory_wrap+0x28>
prev->prev = temp;
c055c11f: 89 50 04 mov %edx,0x4(%eax)
temp->next = prev;
c055c122: 89 02 mov %eax,(%edx)
}
agp_fe.current_controller->pool = temp;
c055c124: a1 ec dc 8f c0 mov 0xc08fdcec,%eax
c055c129: 89 50 10 mov %edx,0x10(%eax)
if (memory == NULL)
return NULL;
agp_insert_into_pool(memory);
so in this case, we faulted while dereferencing agp_fe.current_controller
pointer, and we get to see exactly which function and line it affects...
Personally I find this very useful, and I can see value for having this
script in the kernel for more-than-just-me to use.
Caveats:
* It only works for oopses not-in-modules
* It only works nicely for kernels compiled with CONFIG_DEBUG_INFO
* It's not very fast.
* It only works on x86
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Impact: Bug fix
If bzip2 or lzma fails (for example, if they aren't installed on the
system), we need to propagate the failure out to "make". However,
they were masked by being followed by a semicolon.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
