aboutsummaryrefslogtreecommitdiff
path: root/sound/pci/hda/hda_local.h
AgeCommit message (Collapse)Author
2007-11-19[ALSA] hda-codec - Disable shared stream on AD1986ATakashi Iwai
AD1986A has a hardware problem that it cannot share a stream with multiple pins properly. The problem occurs e.g. when a volume is changed during playback. So far, hda-intel driver unconditionally assigns the stream to multiple output pins in copy-front mode, and this should be avoided for AD1986A codec. The original fix patch was by zhejiang <zhe.jiang@intel.com>. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] hda-codec - Fix possible array overflowTakashi Iwai
dac_nids arrays in each codec support code may have up to 5 items when assigned from the auto-configurator. Some codec codes have less numbers than the possible max. This patch defines the constant and fixes the array definitions. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] hda-codec - Fix build without CONFIG_SND_HDA_GENERICTakashi Iwai
Fixed the build error from patch_sigmatel.c when built without CONFIG_SND_HDA_GENERIC by defining a dummy function to return error. Also, clean up hda_codec.c by removing unneeded ifdefs (the compiler will optimize out). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hda-intel - Add POWER_SAVE optionTakashi Iwai
Added CONFIG_SND_HDA_POWER_SAVE kconfig. It's an experimental option to achieve an aggressive power-saving. With this option, the driver will turn on/off the power of each codec and controller chip dynamically on demand. The patch introduces a new module option 'power_save'. It specifies the second of time-out for automatic power-down. As default, it's 10 seconds. Setting 0 means to suppress the power-saving feature. The codec may have analog-input loopbacks, which are usually represented by mixer elements such as 'Mic Playback Switch' or 'CD Playback Switch'. When these are on, we cannot turn off the mixer and the codec chip has to be kept on. For bookkeeping these states, a new codec-callback is introduced. For the bus-controller side, a new callback pm_notify is introduced, which can be used to turn on/off the contoller appropriately. Note that this power-saving might cause slight click-noise at power-on/off. Also, it might take some time to wake up the codec, and might even drop some tones at the very beginning. This seems to be the side-effect of turning off the controller chip. This turn-off of the controller can be disabled by undefining HDA_POWER_SAVE_RESET_CONTOLLER in hda_intel.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - add snd_hda_codec_stereo() functionTakashi Iwai
Added snd_hda_codec_amp_stereo() function that changes both of stereo channels with the same mask and value bits. It simplifies most of amp-handling codes. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - optimize resume using cachesTakashi Iwai
So far, the driver looked the table of snd_kcontrol_new used for creating mixer elements and forces to call each of its put callbacks in PM resume code. This is too ugly and hackish. Now, the resume is simplified using the codec amp and command register caches. The driver simply restores the values that have been written in the cache table. With this simplification, most codec support codes don't require any special resume callback. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - introduce command register cacheTakashi Iwai
This patch adds the cache for codec command registers. snd_hda_codec_write_cache() and snd_hda_sequence_write_cache() do the write operations with caching, which values can be resumed via snd_hda_codec_resume_cache(). The patch introduces only the framework, and no codec code is using this cache yet. It'll be implemented in the following patch. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Add a generic bind-control helperTakashi Iwai
Added callbacks for a generic bind-control of mixer elements. This can be used for creating a mixer element controlling multiple widgets at the same time. Two macros, HDA_BIND_VOL() and HDA_BIND_SW(), are introduced for creating bind-volume and bind-switch, respectively. It taks the mixer element name and struct hda_bind_ctls pointer, which contains the real control callbacks in ops field and long array for private_value of each bound widget. All widgets have to be the same type (i.e. the same amp capability). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-intel - Add hwdep interfaceTakashi Iwai
Added a hwdep interface for each codec (enabled per kconfig). This interface can be used for reading/writing HD-audio verbs and other purposes as future extensions. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-intel - Coding style fixesTakashi Iwai
Fix codes to follow more to the standard kernel coding style. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-31[ALSA] hda-codec - Fix STAC922x capture boost levelTakashi Iwai
STAC922x provides the capture boost level up to 4, but actually it works only up to 2. Since the range of the mixer is automatically defined from amp-capability bits, we need to override the value beforehand. snd_hda_override_amp_caps() is introduced for this purpose. The function patch_stac922x() calls this for NID 0x12 (Mux Capture Volume). This should fix another recording problem on Intel Macs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] hda-codec - Add line_out_type to auto_pin_cfg structTakashi Iwai
Added line_out_type field to auto_pin_cfg struct to provide the pin type of default line_outs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] hda-codec - Fix SPDIF outputTakashi Iwai
Fix SPDIF output (at least on Realtek codecs). The DIGI_CONVERT verbs have to be reset before the PCM stream is set up. Otherwise the digital setup is screwed up. Also, check the AMP capability before setting AMP of the digital out widget. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] hda-codec - Use global workqueueTakashi Iwai
Use global workqueue for simplicity. The unsolicited event frequency isn't so high to have own queue. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] hda-codec - Use snd_pci_quirk_lookup() for board config lookupTakashi Iwai
Use snd_pci_quirk_lookup() for looking up a board config table. The config table is sorted in numerical order of PCI SSIDs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-09-23[ALSA] hda-codec - Support multiple headphone pinsTakashi Iwai
Some machines have multiple headpohne pins (usually on the lpatop and on the docking station) while the current hda-codec driver assumes a single headphone pin. Now it supports multiple hp pins (at least for detection). The sigmatel 92xx code supports this new multiple hp pins. It detects all hp pins for auto-muting, too. Also, the driver checks speaker pins in addition. In some cases, all line-out, speaker and hp-pins coexist. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Fix compile errors with older gccTakashi Iwai
Fixed compile errors with older gcc for initialization of a union. sound/pci/ca0106/ca0106_mixer.c: At top level: sound/pci/ca0106/ca0106_mixer.c:499: unknown field 'p' specified in initializer sound/pci/ca0106/ca0106_mixer.c:499: warning: missing braces around initializer sound/pci/ca0106/ca0106_mixer.c:499: warning: (near initialization for 'snd_ca0106_volume_ctls[0].tlv') Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] HDA codec & CA0106 - add/fix TLV supportJaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-03-22[ALSA] hda-codec - Fix BIOS auto-configurationTakashi Iwai
Modules: HDA Codec driver,HDA generic driver - Fix autoconfig speaker/hp detection Now it allows multiple speaker pins (e.g. Dell laptops have such config) - Use speaker or hp pins if no line-outs are available This fixes the silence output on recent Dell laptops with STAC9200 (ALSA bug#1843) - Fix analog/realtek/sigmatel autoconfig parser Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] hda-codec - Fix ALC262 for Fujitsu laptopTakashi Iwai
Modules: HDA Codec driver,HDA generic driver Add 'fujitsu' model for ALC262 patch to support a FSC laptop. The internal speaker is turned on/off with jack sensing. Also fixed alc262 'basic' model. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03[ALSA] hda-codec - Small clean up and fixesTakashi Iwai
Modules: HDA Codec driver,HDA generic driver - Common labels for input pins - Fix and clean up of Realtek codec parsers Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03[ALSA] hda-codec - Add the support of ALC262,ALC883,ALC885,ALC861Kailang Yang
Modules: HDA Codec driver,HDA generic driver This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver More models and improvements for ALC880, ALC260 and ALC882 codecs, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03[ALSA] hda-codec - Fix connection list parsingTakashi Iwai
Modules: HDA Codec driver,HDA generic driver - Fix connection list parsing (with ranged flag). - Increase the max number of connections - Introduce widget capabilities cache - Power up/down widgets at init, suspend and resume Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03[ALSA] Remove xxx_t typedefs: HD-Audio codecTakashi Iwai
Modules: HDA Codec driver,HDA generic driver Remove xxx_t typedefs from the HD-Audio codec support codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03[ALSA] hda-codec - Fix assignment of speaker pinTakashi Iwai
Modules: HDA Codec driver,HDA generic driver Fix the auto-assignment of speaker pin. Handle it independently from line-out pins. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03[ALSA] hda-codec - Add channel-mode helperTakashi Iwai
Modules: HDA Codec driver,HDA generic driver Add common channel-mode helper functions for all codec patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-04[ALSA] hda-codec - Minor rewritesTakashi Iwai
Modules: HDA Codec driver,HDA generic driver - Make bound controls global to all patches - Clean up analog patches (for the upcoming extension to AD1988) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] hda-codec - More fix of ALC880 codec supportTakashi Iwai
Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver - Fix some invalid configurations, typos in the last patch - Make init_verbs chainable, so that different configs can share the same init_verbs - Reorder and clean up the source codes in patch_realtek.c - Add the pin default configuration parser, used commonly in cmedia and realtek patch codes. - Add 'auto' model to ALC880 for auto-configuration from BIOS Use this model as default, and 3-stack as fallback Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Rename pci_vendor/pci_device to pci_subvendor/pci_subdeviceTakashi Iwai
HDA Codec driver,HDA generic driver Renamed pci_vendor/pci_device fields to pci_subvendor/pci_subdevice. They are really PCI subsystem IDs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!