aboutsummaryrefslogtreecommitdiff
path: root/sound/pci/hda/hda_proc.c
AgeCommit message (Collapse)Author
2009-12-15ALSA: hda - introduce HDA_SUBDEV_AMP_FLAG (ControlAmp in proc)Jaroslav Kysela
The purpose of this changeset is to show information about amplifier setting in the codec proc file. Something like: Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-12-15ALSA: hda - add more NID->Control mappingJaroslav Kysela
This set of changes add missing NID values to some static control elemenents. Also, it handles all "Capture Source" or "Input Source" controls. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-12-11ALSA: intelhdmi - accept DisplayPort pinWu Fengguang
HDA036 spec states: DP (Display Port) indicates whether the Pin Complex Widget supports connection to a Display Port sink. Supported if set to 1. Note that it is possible for the pin widget to support more than one digital display connection type, e.g. HDMI and DP bit are both set to 1. Also export the DP pin cap in procfs. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-11ALSA: hda - show HBR(High Bit Rate) pin cap in procfsWu Fengguang
Note that the HBR capability only applies to HDMI pin. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18ALSA: hda - show EPSS capability in procWu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16ALSA: hda - proc - introduce Control: lines to show mixer<->NID assignmentJaroslav Kysela
This is an initial patch to show universal control<->NID assigment in proc codec file. The change helps to debug codec related problems. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-12ALSA: hda - Don't access invalid substream in proc fileTakashi Iwai
The commit e3303235209c0496b490e10ab131e72a9568c153 "ALSA: hda - proc - show which I/O NID is associated to PCM device" introduces the access to substream pointer. But, PCMs may have no substreams in one or both directions, and this results in NULL dereference. Also, print the first substream number doesn't make sense. This patch removes the access to the substream pointer, and reformat to fit to the standard coding style. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-10ALSA: hda - proc - show which I/O NID is associated to PCM deviceJaroslav Kysela
Output something like: Node 0x02 [Audio Output] wcaps 0x11: Stereo Device: name="ALC888 Analog", type="Audio", device=0, substream=0 Converter: stream=0, channel=0 ... Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24ALSA: hda: move open coded tricks into get_wcaps_channels()Wu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-27ALSA: hda - Introduce get_wcaps_type() macroTakashi Iwai
Add a helper macro to retrieve the widget type from wiget cap bits. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-16ALSA: hda - Split codec->name to vendor and chip name stringsTakashi Iwai
Split the name string in hda_codec struct to vendor_name and chip_name strings to be stored directly from the preset name. Since mostly only the chip name is referred in many patch_*.c, this results in the reduction of many codes in the end. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-23ALSA: hda - Add function id to proc outputPascal de Bruijn
This patch does two things: Output Intel HDA Function Id in /proc/asound/cardX/codec#X Align Vendor/Subsystem/Revision Ids to 8 characters, front-padded with zeros Before: Vendor Id: 0x11d41884 Subsystem Id: 0x103c281a Revision Id: 0x100100 After: Function Id: 0x1 Vendor Id: 0x11d41884 Subsystem Id: 0x103c281a Revision Id: 0x0100100 As report on the Kernel Bugzilla #12888 Signed-off-by: Pascal de Bruijn <pascal@unilogicnetworks.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-19ALSA: hda - Don't show the current connection for power widgetsTakashi Iwai
The power-widgets have no connection selection, so skip the check in proc output, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-12ALSA: hda - Print multiple out-amp values of pin widgets on Conext codecsTakashi Iwai
Add a flag to work around the non-standard amp-value handling on Conexant codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-02ALSA: hda - No widget selection for volume knob widgets in proc outputTakashi Iwai
Volume-knob widgets have no widget selection although they have widget connections. Thus, the connection list in the proc output shouldn't contain the selection (*). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-28ALSA: hda - Add IDT/STAC-specific proc outputTakashi Iwai
Added power-map and analog-loopback information to proc output for IDT/STAC codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-28ALSA: hda - Add codec-specific proc hookTakashi Iwai
Added a hook for proc outputs of codec-specific stuff. Moved realtek-specific coeff output into patch_realtek.c as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-25ALSA: hda - Really fix bits value in proc outputTakashi Iwai
The fix in 82894b6f6f109722070d4d78730fe50cdaba9443 resulted in zero due to wrong mask and bit shifts. Now fixed really. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-25ALSA: hda - Fix proc pcm rate bitsTakashi Iwai
Show only the relevant bits in the PCM rate bits as in the earlier version. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-21ALSA: hda - Fix build without CONFIG_PROC_FSTakashi Iwai
snd_print_pcm_rates() and snd_print_pcm_bits() are used by both hda_proc.c and hda_eld.c, thus they have to be defined in the common place. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-21ALSA: hda - properly print ELD sample bitsWu Fengguang
Fix bugs on printing the ELD sample bits. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-19ALSA: hda - Show missing GPIO unsol bitsTakashi Iwai
The GPIO unsolicited event bits are read but not shown in the proc file. Let's fix it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-19ALSA: hda: make global snd_print_pcm_bits()Wu Fengguang
Introduce a global function snd_print_pcm_bits() and use it in the ELD code. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-18ALSA: introduce snd_print_pcm_rates()Wu Fengguang
We want to share some code with print_pcm_rates(), so extract a common routine snd_print_pcm_rates() from it. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-07Merge branch 'topic/fix/hda' into topic/hdaTakashi Iwai
2008-11-04ALSA: hda - Limit the number of GPIOs show in procTakashi Iwai
Limit the number of GPIOs shown in proc. Otherwise it gets too long unnecessarily, and hard to analyze. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-27ALSA: hda: add snd_hda_get_jack* functionsMatthew Ranostay
This patch adds snd_hda_get_jack* functions for reporting jack location, device, and connectivity type. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-13ALSA: hda - Allocate name string of each codecTakashi Iwai
Allocate dynamically the name string of each codec instead of pointing to a static string. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-09-23ALSA: HDA: hda_proc: Fix printf format specifierRobin H. Johnson
The Pincap output had a typod format specifier, leading to an extraneous "08" in the output, which is a reserved bit of the Vref field, and was really confused :-). Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: hda - print a few HDMI information in procTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-20ALSA: hda - Fix digital converter proc outputTakashi Iwai
AC_VERB_GET_DIGI_CONVERT_2 isn't actually implemented but reserved. The whole SIC bits are returned from DIGI_CONVERT_1. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-02-22[ALSA] hda-codec - Fix amp-in values for pin widgetsTakashi Iwai
Pin widgets have always one amp-input value regardless of number of connections. The proc file showed values wrongly. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31[ALSA] hda_proc - Add a number of new settings to proc codec outputAndrew Paprocki
This patch adds additional output to the /proc codec#X info. The following pieces of information are added to the output: - Balanced, L/R swap, trigger, impedance sense pin capabilities - Vref pin capabilities - Current Vref pin widget control setting - Default configuration association, sequence, and misc bit test - EAPD/BTL bits conveying balanced mode, EAPD, and L/R swap - Power state modified to show state name as well as setting vs actual value - GPIO parameter output on Audio Function Group, including enumeration of IO pins which are indicated present (Any I and O pins are not output at this time) - Stripe and L/R swap widget capabilities - All digital converter bits: enable, validity, validity config, preemphasis, copyright, non-audio, professional, generation level, and content category - Converter stream and channel values for in/out widgets - SDI select value for in widgets - Unsolicited response widget capability tag and enabled bit - Delay widget capability value - Processing widget capability benign bit and number of coefficients - Realtek Define Registers: processing coefficient, coefficient index [Also, fixed space/tab issues and make codes a bit more readable -- Takashi] Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-intel - Show more volume-knob attributesTakashi Iwai
Show more attributs of volume-knob widgets. Also don't put empty lines when no connection list is found. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Show more information in proc fileTakashi Iwai
Show the current EAPD status and volume-knob status in proc file. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hda-intel - Add POWER_SAVE optionTakashi Iwai
Added CONFIG_SND_HDA_POWER_SAVE kconfig. It's an experimental option to achieve an aggressive power-saving. With this option, the driver will turn on/off the power of each codec and controller chip dynamically on demand. The patch introduces a new module option 'power_save'. It specifies the second of time-out for automatic power-down. As default, it's 10 seconds. Setting 0 means to suppress the power-saving feature. The codec may have analog-input loopbacks, which are usually represented by mixer elements such as 'Mic Playback Switch' or 'CD Playback Switch'. When these are on, we cannot turn off the mixer and the codec chip has to be kept on. For bookkeeping these states, a new codec-callback is introduced. For the bus-controller side, a new callback pm_notify is introduced, which can be used to turn on/off the contoller appropriately. Note that this power-saving might cause slight click-noise at power-on/off. Also, it might take some time to wake up the codec, and might even drop some tones at the very beginning. This seems to be the side-effect of turning off the controller chip. This turn-off of the controller can be disabled by undefining HDA_POWER_SAVE_RESET_CONTOLLER in hda_intel.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-intel - Coding style fixesTakashi Iwai
Fix codes to follow more to the standard kernel coding style. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20[ALSA] hda-codec - Output MFG information for HDA devicesJonathan Phenix
This patch output information about the MFG (Modem Function Group) to the /proc/asound/card?/codec#? file. This information is important to identify if a HDA device has a modem or not. Signed-off-by: Jonathan Phenix <jonathan@linuxant.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-02PCI: Cleanup the includes of <linux/pci.h>Jean Delvare
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20[ALSA] hda-codec - Verbose proc output for PCM parametersTakashi Iwai
Make the output for PCM parameters more verbose, showing each rate, bits and format. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20[ALSA] hda-codec - Fix a typoTakashi Iwai
Fixed a typo in proc file. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] HDA codec - little code & comment cleanupJaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-22[ALSA] hda-codec - Show EAPD and pin-detection capabilities in procTakashi Iwai
Show EAPD and pin-detection capabilities in proc files. They are often required to support the proper audio functionality. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] Remove unneeded read/write_size fields in proc text opsTakashi Iwai
Remove unneeded read/write_size fields in proc text ops. snd_info_set_text_ops() is fixed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03[ALSA] sound/: possible cleanupsAdrian Bunk
Modules: RawMidi Midlevel,HDA generic driver This patch contains the following possible cleanups: - pci/hda/hda_proc.c should #include 'hda_local.h' for including the prototype of it's global function snd_hda_codec_proc_new() - core/rawmidi.c: make the needlessly global and EXPORT_SYMBOL'ed function snd_rawmidi_info() static Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03[ALSA] Remove xxx_t typedefs: HD-Audio codecTakashi Iwai
Modules: HDA Codec driver,HDA generic driver Remove xxx_t typedefs from the HD-Audio codec support codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-04[ALSA] hda-codec - Show power state in proc fileTakashi Iwai
Modules: HDA generic driver Show the power state of each widget in proc file. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] hda-codec - Assign audio PCMS firstTakashi Iwai
HDA Codec driver,HDA Intel driver,HDA generic driver Assign audio PCMs first before modem PCMs. The modem stream is assigned up to device #6, to be consistent over different models. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-06-22[ALSA] hda-codec - Print all AMP IN valuesTakashi Iwai
HDA generic driver Print all AMP IN values when multiple nodes are connected. Signed-off-by: Takashi Iwai <tiwai@suse.de>