aboutsummaryrefslogtreecommitdiff
path: root/sound/pci/hda
AgeCommit message (Collapse)Author
2009-07-01ALSA: hda - Add missing static to patch_ca0110()Takashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-29Merge branch 'fix/hda-samsung-p50' into for-linusTakashi Iwai
* fix/hda-samsung-p50: ALSA: hda - Fix support for Samsung P50 with AD1986A codec ALSA: hda - Generalize the pin-detect quirk for Lenovo N100 ALSA: hda - Simplify AD1986A mixer definitions
2009-06-29ALSA: hda - Add missing initializations for ALC268 and ALC269Takashi Iwai
During the changes to clean up / fix the realtek codec initialization routines in commit 4a79ba34cada6a5a4ee86ed53aa8a73ba1e6fc51, I forgot to add the check for ALC268 and ALC269. This resulted in the missing EAPD and COEF setup for these codecs. This patch adds the missing checks for these codecs. Reference: bko#13633 http://bugzilla.kernel.org/show_bug.cgi?id=13633 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-29ALSA: hda - Line In for Acer Inspire 6530G modelTony Vroon
The Line In connector is set up as PIN_IN by default, using VREF_HIZ. It is connected to both ADCs, so add it to both input selectors. Also add the ability to use the input mix (on a SoundBlaster one would call this "What You Hear"). Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-25ALSA: hda - Use model=acer-aspire-6530g for Acer Aspire 6930GTakashi Iwai
For Acer Aspire 6930G (1025:015e), acre-aspire-6530g model matches obviously better. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-25ALSA: hda - Fix acer-aspire-6530g model quirkEmilio López
Fix the following bugs of acer-aspire-6530g model with ALC888: - HP jack to mute all speaker outputs including LFE - Make digital built-in mic working Signed-off-by: Emilio López <buhitoescolar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-25ALSA: hda - Add pin-sense trigger when needed for Realtek codecsTakashi Iwai
Realtek codecs require the pin-sense trigger call before actually reading the pin-sense. Without this, the pin-detection might not be done accurately. This patch adds the pin-capability check and issues the trigger call if required. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-24ALSA: hda - Fix support for Samsung P50 with AD1986A codecTakashi Iwai
Samsung P50 requires the HP auto-muting unlike other Samsung models. Added a new model=samsung-p50 to support this. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-24ALSA: hda - Generalize the pin-detect quirk for Lenovo N100Takashi Iwai
Add a new flag to ad_spec struct so that the same hack can be used for any other models (if any). This also allows other models to reuse the auto-mute functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-24ALSA: hda - Simplify AD1986A mixer definitionsTakashi Iwai
Split mixer element arrays of AD1986A models to several pieces so that each model can share the same mixer arrays. This removes lots of duplicated data. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-22ALSA: hda - Make jack-plug notification selectableTakashi Iwai
Make the jack-plug notification via input layer selectable via Kconfig. This is often unnecessary, and the similr function will be provided using the ALSA control API in near future anyway. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-22ALSA: hda - Add digital-mic support to ALC262 auto modelTakashi Iwai
Add the digital-mic support with ALC262 auto model. The new ALC262 models have the digital mic at NID 0x12. This widget isn't checked in the current alc262_auto_create_analog_input_ctls() since it's under 0x18. So, just reuse the routine for alc269 to fix the behavior. But, it doesn't suffice: the digital mic is supported only with the ADC0, we have to exclude other ADCs when d-mic is detected. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-22ALSA: hda - Fix check of input source type for realtek codecsTakashi Iwai
Fix the check of the input-source type by checking the widget type of each capture-source item. Since some codecs can have both the mixer and selector types depending on the ADC, alc_mux_enum_put() needs to check each widget. With this change, spec->capture_style gets unneeded, so it's removed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-22ALSA: hda - Add quirk for Sony VAIO Z21MNTakashi Iwai
It needs model=toshiba-s06 to work with the digital-mic. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-06-22ALSA: hda - Get back Input Source for ALC262 toshiba-s06 modelTakashi Iwai
The commit f9e336f65b666b8f1764d17e9b7c21c90748a37e ALSA: hda - Unify capture mixer creation in realtek codes removed the "Input Source" mixer element creation for toshiba-s06 model because it contains a digital-mic input. This patch take the control back. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-06-22ALSA: hda - Fix unsigned comparison in patch_sigmatel.cTakashi Iwai
Fix the comparison of unsigned int that causes a compile warning below by changing to the right signed type: patch_sigmatel.c: In function ‘stac92xx_vref_set’: patch_sigmatel.c:658: warning: comparison of unsigned expression < 0 is always false Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-21ALSA: hda - Add model=6530g optionTakashi Iwai
Add the new model string corresponding to the previous Acer Aspire 6530G support. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-21ALSA: hda - Acer Inspire 6530G model for Realtek ALC888Tony Vroon
The selected 4930G model seemed to keep the subwoofer 'tuba' function from operating correctly. Removing the existing PCI ID match made this work again, but it was mapped to 'Side' instead of to LFE as one would expect. This attempts to enable all functionality and keep the amount of available mixer sliders low. Any slider that had no audible effect on the output audio has been removed, and as such EAPD is not currently enabled. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-17ALSA: HDA - Correct trivial typos in comments.Sasha Alexandr
Correct some trivial typos in comments. Signed-off-by: Sasha Alexandr <brina_keith@ns.sympatico.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-17ALSA: HDA - Name-fixes in code (tagra/targa)Sasha Alexandr
Correct some cut+paste typos from 'tagra' to 'targa'. Signed-off-by: Sasha Alexandr <brina_keith@ns.sympatico.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-17ALSA: HDA - Add pci-quirk for MSI MS-7350 motherboard.Sasha Alexandr
Add pci-quirk for MSI MS-7350 motherboard with Realtek ALC888. Signed-off-by: Sasha Alexandr <brina_keith@ns.sympatico.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-17ALSA: hda - Fix memory leak at codec creationTakashi Iwai
The codec->modelname field is allocated twice in snd_hda_codec_new(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-13ALSA: hda - Add quirk for Acer Aspire 6935GTakashi Iwai
Added model=acer-aspire-8930g for Acer Aspire 6935G (1025:0146). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-10ALSA: hda - add quirk for STAC92xx (SigmaTel STAC9205)Simos Xenitellis
A quirk is required for 8086:284b (rev 03) [Subsystem: 161f:2073]. The following has been tested with Alsa 1.0.20 (git master). Background details can be found at https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4561 http://forum.ubuntu-gr.org/viewtopic.php?f=38&t=5290 Tested-by: Theodora Iliopoulou <th30dr@gmail.com> Signed-off-by: Simos Xenitellis <simos@gnome.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-08ALSA: hda - Fix the previous tagra-8ch patchTakashi Iwai
- Fix a typo in the patch - Adapted to follow the recent change for unsol event handling Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-08ALSA: hda - Add 7.1 support for MSI GX620David Heidelberger
Added 7.1 support for MSI GX620 and jack quirk. Reference: kernel bug#13430 http://bugzilla.kernel.org/show_bug.cgi?id=13430 Signed-off-by: David Heidelberger <d.okias@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05ALSA: support Sony Vaio TTGuido Günther
with BIOS probing only we offer a non functional headphone swith and volume slider. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-04ALSA: hda_intel: fix build error when !PMAlexander Beregalov
Fix this build error when CONFIG_PM is not set: ound/pci/hda/hda_intel.c: In function 'azx_bus_reset': sound/pci/hda/hda_intel.c:1270: error: implicit declaration of function 'snd_pcm_suspend_all' sound/pci/hda/hda_intel.c:1271: error: implicit declaration of function 'snd_hda_suspend' sound/pci/hda/hda_intel.c:1272: error: implicit declaration of function 'snd_hda_resume' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-04ALSA: hda - More Aspire 8930G fixesHector Martin
Enable all three capture channels, including the missing nid 7 which is the only one capable of capturing DMIC input Enable Headphone amp for the HP jack. This causes a volume boost for headphones, but does not cause any noticeable effect for light loads like other amps, so there is no need to make it configurable. Add Input Mix capture mux setting to capture the output of the playback input mux (that is, what goes out the speakers except for PCM) Hack another coef register because the stereo DMIC for some reason produces a nonstandard sum/difference signal. I found a bit to make it just use the sum signal for both channels, which makes it behave like a standard mono microphone. The stereo is useless anyway (they're 1cm apart). Tested working: Three capture channels, mic in, line in, DMIC. Tested not working: CD. Not sure why, might be unconnected in the actual hardware or a CD drive issue. Also looked at SPDIF. It appears to work (emitter lights up inside the HP out jack) but I lack a proper miniTOSLINK cable to test it. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02Merge branch 'topic/hda-ctl-reset' into topic/hdaTakashi Iwai
2009-06-02ALSA: hda - Acer Aspire 8930G supportHector Martin
Short story: this laptop has 5.1 built-in speakers which you *really* want to use (the not-so-"sub" woofer is what makes the audio above average for a laptop), so 6-channel support is important (plus a decent asound.conf to upmix stereo). It also has the 3 typical jacks that ought to have a selectable mode. And it's based on ALC889, which sucks. Rationale/explanations: The const_channel_count stuff was added because, for a laptop like this, you always have 6 channels available (internal speakers) but still need to set the mode for the 3 external jacks. Therefore, the device always needs to be in 6-channel mode but there still needs to be a mixer control for the jack mode. You could use line/mic-in at the same time as the 6 internal speakers, for example. You might be tempted to make it even smarter by dynamically switching the max channel count when headphones are plugged in (therefore muting the internal speakers and reducing the physical channel count to the jack channel mode), but as a user I consider this to be harmful because I want the audio to blow up to 6 channels / upmixed as soon as I unplug the headphones, and having opened the device while in 2-channel mode would prevent this from working (and always making 6-channel mode available doesn't do any harm). The hardware needs EAPD turned on and the DACs routed to the internal speaker pins, so the patch adds those verbs. The ALC889 CLFE and subsequent (side/aux, here unused) DACs do NOT work by default, at least here. I wasted much time trying to talk to Realtek/pshou about this, but they just kept sending me useless updates to patch_realtek.c that did nothing relevant. In the end I gave up and brute forced the issue by trying to flip every bit in the proprietary coefficient registers, and eventually found the two magic registers that need to be cleared to enable all DACs. I have only heard Acer users complain, but that might be because ALC889 is pretty new and using 5.1 (and noticing the missing center/lfe channels) might not be that common. If this is a generalized issue with all ALC889 systems then those verbs should probably be moved to a common verb array. The internal mic is untested and probably doesn't work. These settings will probably work for other Acer Gemstone laptops with the same 5.1 speaker config. When identified, those should be added to the PCI subsystem ID list. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: hda - Limit codec-verb retry to limited hardwaresTakashi Iwai
The reset of a BUS controller during operations is somehow risky and shouldn't be done inevitably for devices that have apparently no such codec-communication problems. This patch adds the check of the hardware and limits the bus-reset capability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: hda - Add codec bus reset and verb-retry at critical errorsTakashi Iwai
Some machines machine cause a severe CORB/RIRB stall in certain weird conditions, such as PA access at the start up together with fglrx driver. This seems unable to be recovered without the controller reset. This patch allows the bus controller reset at critical errors so that the communication gets recovered again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: hda - Reorder and clean-up ALC268 quirk tableTakashi Iwai
Rearrange alc268_cfg_tbl[] in the order of vendor id, and group some entries using SND_PCI_QUIRK_MASK(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: hda - fix audio on LG R510Ozan Çağlayan
Currently, LG R510 is only able to produce sound on headphones, the internal speakers are not working. The user tested and confirmed that with model=Dell headphones, internal speakers and the microphone are working flawlessly. Tested-by: Serdar Soytetir <tulliana@gmail.com> Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: hda - Macbook[Pro] 5 6ch supportKacper Szczesniak
this is a patch against current snapshot that adds: 6 channels support for the MB5 model Signed-off-by: Kacper Szczesniak <kacper@qwe.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-01ALSA: hda-intel: improve initialization for ALC262_HP_BPC modelJaroslav Kysela
Fix issues for 3 generations of HP workstations. The modest modifications do the following: 1. Change the second MIC from device 3 to device 1 2. Init the "boost" values to "0" by default From: John Brown <john.brown3@hp.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-01ALSA: hda - Jack Mode changes for Sigmatel boardsNickolas Lloyd
This patch changes Line In as Out Switch and Mic In as Out Switch to enums for consistency, and causes all mic and line in ports to be probed and controls to be added appropriately. Signed-off-by: Nickolas Lloyd <ultrageek.lloyd@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-01ALSA: hda - Support NVIDIA 8 channel HDMI audioWei Ni
Support 8 channel HDMI audio for MCP78/7A Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-31ALSA: hda - Fix a typo in the previous patchTakashi Iwai
ICH6_GCTL_RESET was wrongly set to another bit by the commit b21fadb9c1852c91622ca1dccfeb144bc535e36e. This caused a problem when the codec needs really a reset (e.g. recovering from the communication error at probe). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-30ALSA: hda - Fix reverted LED setup for HPTakashi Iwai
The commit 86d190e77c44cb057742dcc871b12ebd4633c387 reverted the bit flip of LED GPIO for HP DX and DV4-1222nr. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-28Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-05-28ALSA: hda - Add more register bits definitionsTakashi Iwai
Added some missing register bits definitions to reduce magic numbers. Also renamed some to follow the names on the datasheet. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-28ALSA: hda - Always sync writes in single_cmd modeTakashi Iwai
In the single_cmd mode, the hardware cannot store the multiple replies like on RIRB, thus each verb has to sync and wait for the response no matter whether the return value is needed or not. Otherwise it may result in a wrong return value from the previous verb. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-28ALSA: hda - Compaq Presario CQ60 patching for ConexantTony Vroon
A docking mic control is shown by default. The Compaq Presario CQ60 laptop has no docking connector, so designate it as a CXT5051_HP model. This makes the phantom mixer slider disappear. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-26ALSA: hda - Support sync after writing a verbTakashi Iwai
This patch adds a debug mode to make the codec communication synchronous. Define SND_HDA_SUPPORT_SYNC_WRITE in hda_codec.c, and the call of snd_hda_codec_write*() will become synchronous, i.e. wait for the reply from the codec at each time issuing a verb. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-26ALSA: hda - Allow concurrent RIRB access in single_cmd modeTakashi Iwai
In the single_cmd mode, the current driver code doesn't do any update for RIRB just for any safety reason. But, actually the RIRB and single_cmd mode don't conflict. Unsolicited events can be delivered even while using the single_cmd mode. This patch allows the handling of unsolicited events with single_cmd mode, just always checking RIRB independent from single_cmd flag. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-26Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-05-26ALSA: hda - Minor clean up of patch_sigmatel.cTakashi Iwai
- Remove unneeded semicolons - Introduce spec->gpio_led to specify the GPIO bit for LED control Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-25ALSA: hda - Reset CORB/RIRB at retrying the verb communicationTakashi Iwai
When a codec communication error occurs, the CORB/RIRB counters should be reset first before re-issuing the verb. Simply call azx_free_cmd_io() and azx_init_cmd_io() to achieve that. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 04:32:14 +0000