aboutsummaryrefslogtreecommitdiff
path: root/sound/pci/ice1712
AgeCommit message (Collapse)Author
2008-01-31[ALSA] switching rate in STAC9460 codec of Prodigy192Pavel Hofman
* support for switching rate in STAC9460 - using set_rate_val of the akm infrastructure * listing all STAC9460 registers in proc * disabling mpu401 device for Prodigy192 - otherwise the currently flawed mpu401 code hangs kernel when opening the midi device * removing old unused commented-out code Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] I2C fix for ice1724Pavel Hofman
adding i2c busy wait before sending device address to prevent reading bogus data. Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ice1712 - Fix word clock status control on Delta 1010LTTakashi Iwai
The 'Word Clock Status' control on Delta 1010LT checks the CS8427 error register too strictly and almost always returns 1 (unlocked). It should check only the lock status bit. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ice1724 - Clean up ctl callbacks in se.cTakashi Iwai
Clean up ctl callbacks of SE-200PCI driver. Also make sure to check the value ranges. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ice1724 - Check value ranges in ctl callbacksTakashi Iwai
Check the value ranges in ctl put callbacks properly. Also fixed the wrong access type to enum elements in aureon.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ice1724 - Add support of Onkyo SE-90PCI and SE-200PCIShin-ya Okada
Added the support for Onkyo SE-90PCI and SE-200PCI boards. Signed-off-by: Shin-ya Okada <sh_okada at d4.dion.ne.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.czJaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] check for linked substreams of different cardsClemens Ladisch
It is possible to have linked substreams that belong to different cards and/or different drivers. This patch changes some drivers to make sure that they do not incorrectly try to handle substreams of a different card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ice1712 - Fix missing replacement to snd_ctl_boolean_mono_infoTakashi Iwai
There were some places I forgot to replace with snd_ctl_boolean_mono_info. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Clean up with common snd_ctl_boolean_*_info callbacksTakashi Iwai
Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-07-20[ALSA] ice1724 - Add PCM Playback Switch to Revo 7.1Pavel Hofman
This patch adds the support of mute for front channels of M-Audio Revolution 7.1 (the DAC AK4381 features a mute bit). Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-06-28ALSA: fix ice1712 section mismatchRandy Dunlap
Cannot mix const and __initdata: sound/pci/ice1712/prodigy192.c:708: error: ak4114_controls causes a section type conflict Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11[ALSA] ice1724 - Misc fixes for Prodigy192Pavel Hofman
- always set 256fs in SPDIF master clock mode - disable deemphasis filter in AK4114 for Prodigy192 Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1724 - Functioning support for Prodigy 192Pavel Hofman
Fixes: -------- * correct card specific ice1724 initialization * working IEC958 output of the card * renamed capture controls New features: ------------------ * analog input switch (line-in/mic) * optional ak4114 based MI/ODI/O card detection & support: IEC958 input, digital input switch (toslink/coax) Unresolved issues ----------------------- * Analog and digital input enums are listed on playback panel of alsamixer, I do not know how to push them onto the capture one. Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1724 - Add comments for naming of PCM streamsTakashi Iwai
Added some comments regarding naming of PCM streams on vt172x chip. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1724 - call snd_ak4114_build() in juliTakashi Iwai
Call snd_ak4114_build() in juli support code to build proper mixer elements for SPDIF inputs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ak4114 - Fix possible Oops with callbacksTakashi Iwai
ak4114 code may trigger Oops when the parameters are changed without call of snd_ak4114_build(). Now it checks the existence of kctl element, and the workq is triggered after building the necessary kcontrols. Also, did some code clean up. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1724 - Fix AP192 4wire mode accessTakashi Iwai
ap192_4wire_start() in ice1712/revo.c returns unsigned char whereas it should return unsigned int. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] Fix conflicts between const and __devinitdataTakashi Iwai
Marvin told with a depressed face, gcc doesn't like both __devinitdata and const in the same line. So, remove const from all over places now... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1712: build fixesRalf Baechle
CC [M] sound/pci/ice1712/ice1712.o sound/pci/ice1712/ice1712.c:290: error: snd_ice1712_mixer_digmix_route_ac97 causes a section type conflict sound/pci/ice1712/ice1712.c:1630: error: snd_ice1712_eeprom causes a section type conflict ... Gcc like its __devinitdata readable not const, it seems. An alternative fix would be to remove the __devinitdata attribute but that would result in slight runtime bloat. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] Add snd_pcm_group_for_each_entry() for code cleanupTakashi Iwai
Added a new macro snd_pcm_group_for_each_entry() just for code cleanup. Old macros, snd_pcm_group_for_each() and snd_pcm_group_substream_entry(), are removed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-09Fix misspellings collected by members of KJ list.Robert P. J. Day
Fix the misspellings of "propogate", "writting" and (oh, the shame :-) "kenrel" in the source tree. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-09[ALSA] Add even more 'const' to everything related to TLVTakashi Iwai
Mark TLV data as 'const' Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Add some more 'const', but needs changes in i2c/other/ak4*Takashi Iwai
Make data passed to ak4xxx_create 'const'. Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Add 'const' to files in pci/ice1712/Takashi Iwai
Mark a lot of data as 'const' Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] ice1712 - Reorganize existing eeprom dataTakashi Iwai
Reorganize EEPROM data (in C99 style). Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Add support of the ESI Waveterminal 192M to the ice1724 ALSA driverClement Guedez
This patch adds the support of the ESI Waveterminal 192M soundcard to the ice1724 familly ALSA driver. It's a semi-professionnal soundcard for home studio : many I/O and a quality of sound is good, better than consumer cards, but less musical than professional cards. It use a Via Envy24ht chipset as ice1724 soundcard, Sigmatel stac9640 ADC/DAC for the analog I/O as Prodigy192, and Atmel ak4114 for S/PDIF as ESI Julia. Is working : the 8 analog outputs, the analog inputs 1&2, the mic input 1, the coaxial & optical digital outputs. Signed-off-by: Clement Guedez <klem.dev@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] ice1724 - Add support for Prodigy 7.1 XTToshimune Konno
This patch supports Audiotrack 7.1 XT. 7.1XT is almost same hardware as 7.1LT. so using 7.1 LT's code. Signed-off-by: Toshimune Konno <heitouk@nifty.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] ice1724 - Add support of M-Audio Audiophile 192Takashi Iwai
Added the (experimental) support of M-Audio Audiophile 192 board. Currently, the analog and the digital playbacks seem working fine. The inputs seem not working as far as I've tested yet. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Enable the analog loopback of the Revolution 5.1Jochen Voss
Enable the analog loopback of the Revolution 5.1 card. This patch adds support for the PT2258 volume controller and modifies the Revolution 5.1 driver to make use of this facility. This allows to control the analog loopback of the card. Signed-off-by: Jochen Voss <voss@seehuhn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Enable capture from line-in and CD on Revolution 5.1Jochen Voss
Enable capture from line-in and CD on the Revolution 5.1 card. This patch adds support for switching between the 5 input channels of the AK5365 ADC and modifies the Revolution 5.1 driver to make use of this facility. Previously the capture channel was fixed to channel 0 (microphone on the Revolution 5.1 card). Signed-off-by: Jochen Voss <voss@seehuhn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20[ALSA] Remove IRQF_DISABLED for shared PCI irqsTakashi Iwai
Fix IRQ flags for PCI devices. The shared IRQs for PCI devices shouldn't be allocated with IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't be used. The patch removes unnecessary cast in request_irq and free_irq, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-23[ALSA] ak4xxx - Remove bogus IPGA controlsTakashi Iwai
Remove IPGA volume controls and merge the IPGA range to ADC volume controls. These two volumes are not really independent but connected simply in different ranges 0-0x7f and 0x80-max. It doesn't make sense to provide two controls. Since both 0x7f and 0x80 specify 0dB, a hack is needed for IPGA range to skip 0x80 (increment one) for such controls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Add dB scale information to ice1724 driverTakashi Iwai
Added the dB scale information to each board support code of ice1724 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Add dB scale information to ice1712 driverTakashi Iwai
Added the dB scale information for native digital volumes of ice1712 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Clean up and add TLV support to AK4xxx i2c driverTakashi Iwai
- Clean up the code in AK4xxx-ADDA i2c code. - Fix capture gain controls for AK5365 - Changed the static table for DAC/ADC mixer labels to use structs - Implemented TLV entries for each AK codec The volumes in AK4524, AK4528 and AK5365 are corrected with a table to be suitable for dB conversion. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] ice1712 - fix 1600->16000Hz value typoJaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Revolution 5.1 - complete the AK5365 supportJochen Voss
Complete the AK5365 support. This adds a boolean control to toggle the soft mute feature of the AK5365 chip. Signed-off-by: Jochen Voss <voss@seehuhn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Revolution 5.1 - register the AK5365 ADC with ALSAJochen Voss
Enable capture support for the M-Audio Revolution 5.1 card, by registering the ADC with ALSA. Signed-off-by: Jochen Voss <voss@seehuhn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-12[ALSA] Fix section mismatch errors in ALSA PCI driversTakashi Iwai
Fixed 'section mismatch' errors in ALSA PCI drivers: - removed invalid __devinitdata from pci id tables - fix/remove __devinit of functions called in suspend/resume Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-12[ALSA] Reduce the string length of Terratec Aureon 7.1 UniverseTakashi Iwai
Fix the driver string name for Terratec Aureon 7.1 Universe to fit in 15 letters to avoid the overflow. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-02[PATCH] irq-flags: sound: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[ALSA] Stereo controls for M-Audio Revolution cardsJani Alinikula
This patch adds stereo controls to revo cards by making the ak4xxx driver mixers configurable from the card driver. Signed-off-by: Jani Alinikula <janialinikula@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-22[ALSA] ice1712 - Set mpu401 info flags from _card_infoAlan Horstmann
To permit use, in ice1712, of the mpu401 info flags recently added to mpu401_uart, adds info_flags in snd_ice1712_card_info so that additional flags can be set, if desired.  'MPU401_INFO_INTEGRATED' is always set with the ice1712.  The flags are passed on to snd_mpu401_uart_new(). _INFO_OUTPUT is set for DMX6fire mpu2. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] ice1724 - Add functionality for Audiotrak Prodigy 7.1 LTTakashi Iwai
This patch adds support for useable front audio channels, user controllable headphone channel and optical output. From: Anho Ki Signed-off-by: Matt Taylor <mwtaylor@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] ice1712 - Disable AC97 for DMX6fireAlan Horstmann
Consumer AC97 is not used by the Terratec DMX6fire, but eeprom bit indicates it is; change the stored value to disable failing consumer mode. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] Change an arugment of snd_mpu401_uart_new() to bit flagsTakashi Iwai
Change the 5th argument of snd_mpu401_uart_new() to bit flags instead of a boolean. The argument takes bits that consist of MPU401_INFO_XXX flags. The callers that used the value 1 there are replaced with MPU401_INFO_INTEGRATED. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] Remove unneeded read/write_size fields in proc text opsTakashi Iwai
Remove unneeded read/write_size fields in proc text ops. snd_info_set_text_ops() is fixed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] ice1712 - Provides specified midi port names instead of defaultsAlan Horstmann
Patch provides for the ice1712 card driver to overwrite the midi port name string given by default in mpu401_uart, with one specified in snd_ice1712_card_info. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 12:09:10 +0000