aboutsummaryrefslogtreecommitdiff
path: root/sound/pci/oxygen/oxygen_lib.c
AgeCommit message (Collapse)Author
2009-09-03sound: oxygen: handle cards with missing EEPROMClemens Ladisch
The card model detection code introduced in 2.6.30 that tries to work around partially broken EEPROM contents by reading the EEPROM directly does not handle cards where the EEPROM has been omitted. In this case, we have to use the default ID to allow the driver to load. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-and-tested-by: Ozan Çağlayan <ozan@pardus.org.tr> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-27sound: oxygen: zero-initialize model dataClemens Ladisch
Model drivers assume that model_data is zeroed, so we better use kzalloc() (like we did before when it was allocated together with the card structure). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: automatically restore overwritten EEPROMClemens Ladisch
If the EEPROM was partially overwritten (which seems to happen before the OS is booted), restore its entire contents by deducing it from the remaining information. This does not have any effect on the Linux driver, which works even with incomplete information in the EEPROM, but it makes other drivers work again. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: handle cards with broken EEPROMClemens Ladisch
Under as yet unknown circumstances, the first word of the sound card's EEPROM gets overwritten. When this has happened, we cannot rely on the subsystem IDs that the kernel reads from the PCI configuration registers. Instead, we read the IDs directly from the EEPROM and do the ID matching manually. Because the model-specific driver cannot determine the model before calling oxygen_pci_probe(), that function now gets a get_model() callback as parameter. The customizing of the model structure, which was formerly done by the probe() callback, also has moved into get_model(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: use static driver nameClemens Ladisch
When allocating resources, use a fixed name instead of reading it from the model structure. This allows us to allocate the resources before the actual model is known. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: allocate model_data dynamicallyClemens Ladisch
Allocate the model-specific data dynamically instead of including it in the memory block of the card structure. This will allow us to determine the actual model after the card creation. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19sound: oxygen: make the owner module a parameter of the probe functionClemens Ladisch
Move the owner field out of the oxygen_model structure and make it a parameter of oxygen_pci_probe(), because the actual owner module does not depend on the card model. Furthermore, moving it out of the model structure allows us to create the card structure before the actual model is known. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Convert to snd_card_create() in sound/pci/*Takashi Iwai
Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-09-22ALSA: oxygen: add UART I/O functionsClemens Ladisch
Add functions to allow model drivers to communicate with external chips by doing I/O with the not-used-for-MIDI UART. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: configure MIDI via device_configClemens Ladisch
To enable the MIDI port, model drivers must now set flags in device_config, not only in misc_flags. This allows model drivers to enable the UART without creating an ALSA MIDI device. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: rename pcm_dev_cfgClemens Ladisch
Rename the pcm_dev_cfg field to device_config because there will be additional flags that do not describe PCM devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: add probe callbackClemens Ladisch
Add a probe callback to the model structure so that model-specific drivers can refine their model detection before the card is initialized. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22ALSA: oxygen: use a copy of the model structClemens Ladisch
Put a copy of the model structure into the chip structure so that model- specific drivers can modify it depending on a particular device instance. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-05-19[ALSA] oxygen: add PM supportClemens Ladisch
Add suspend/resume support. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19[ALSA] oxygen: add symbol for I/O space sizeClemens Ladisch
Remove another magic number - add a symbol for the size of the PCI I/O range. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19[ALSA] oxygen: fix version in MODULE_LICENSEClemens Ladisch
Adjust the MODULE_LICENSE strings to properly reflect the actual license. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-04-24[ALSA] Fix synchronize_irq() bugs, redundanciesJeff Garzik
free_irq() calls synchronize_irq() for you, so there is no need for drivers to manually do the same thing (again). Thus, calls where sync-irq immediately precedes free-irq can be simplified. However, during this audit several bugs were noticed, where free-irq is preceded by a "irq >= 0" check... but the sync-irq call is not covered by the same check. So, where sync-irq could not be eliminated completely, the missing check was added. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: mute by defaultClemens Ladisch
Initialize the playback volume controls as being muted and having minimal volume. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: generalize handling of DAC volume limitsClemens Ladisch
Add fields for the DAC volume limits to the module structure so that model drivers do not need to install their own control info handlers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: use SPDIF input only if presentClemens Ladisch
If the card model does not have a digital input or an AC97 codec, disable the respective interrupt and mixer controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: fix line-in recording selection (now for real)Clemens Ladisch
On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly like on Xonar cards, so move the Xonar code to the common mixer code. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: disable clock of unused I2S inputsClemens Ladisch
Disable the master clock outputs of any unused I2S inputs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: move MIDI flag to model structClemens Ladisch
Put the flag that enables the MIDI port into the model structure instead of passing it as a separate parameter to oxygen_pci_probe(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: make SPI/2-wire configuration model-specificClemens Ladisch
Allow the model drivers to specify if the codec communication goes over SPI or a 2-wire bus. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] oxygen: add monitor controlsClemens Ladisch
Add controls to enable monitoring of the analog and digital inputs. To allow monitoring after loading the driver when nothing has been played back or recorded yet, the I2S input and outputs are initialized to a valid configuration. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-02-22[ALSA] oxygen - Fix section mismatchTakashi Iwai
Removed invalid __devinit and __devexit that are remaining after split to a helper module. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31[ALSA] virtuoso: monitor external power on D2XClemens Ladisch
On the Xonar D2X, monitor the GPIO pin that indicates whether external power is present. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: add front panel controlsClemens Ladisch
Add mixer controls for the front panel AC97 codec. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: use AC97 interruptClemens Ladisch
After an AC97 register read or write, use the AC97 interrupt instead of polling to wait for the access to be completed. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: make line-in exclusive only on XonarClemens Ladisch
Move the line input switching code to the Virtuoso driver because only the Xonar cards bypass the analog mixer for line input. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: more initializationClemens Ladisch
Initialize more registers of the controller and the second AC97 codec. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: add 192 kHz SPDIF input supportClemens Ladisch
Change the oxygen_spdif_input_bits_changed() function so that clock changes on the SPDIF input are correctly detected. This means that sample rates greater than 96 kHz are now supported. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: move model-specific data out of common headerClemens Ladisch
Instead of having model-specific fields in the common struct oxygen, put them into a private structure that is allocated together with the card structure. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: add more symbolsClemens Ladisch
Add symbol definitions for the various codecs and GPIO pins. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: remove MIDI autodetectionClemens Ladisch
The MIDI bit in the MISC register is set by default and cannot be used to detect the presence of a MIDI port. Instead, add a parameter to the oxygen_pci_probe() function so that model drivers can specify this. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: remove magic numbersClemens Ladisch
Replace some magic numbers with register symbols. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: fix playback routingClemens Ladisch
The default playback routing must be 0xe4, not 0xe1; the front and surround DACs were exchanged. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: add register definitionsClemens Ladisch
Add more symbols for registers and register fields. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: make SPI configuration configurableClemens Ladisch
Add a field to the model structure so that it is possible to have a card where the SPI outputs 4 and 5 are used for an EEPROM. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: make AC97 codec optionalClemens Ladisch
Only initialize and create mixer controls for the first AC97 codec when one has actually been detected. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: use an array of snd_kcontrol pointersClemens Ladisch
Use an array for the pointers to known controls so that it is easier to add more. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] oxygen: fix channel routingClemens Ladisch
Do not exchange the surround and back jacks except when in 7.1 mode where the surround jack is not rear but side. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] add CMI8788 driverClemens Ladisch
Add the snd-oxygen driver for the C-Media CMI8788 (Oxygen) chip, used on the Asound A-8788, AuzenTech X-Meridian, Bgears b-Enspirer, Club3D Theatron DTS, HT-Omega Claro, Razer Barracuda AC-1, Sondigo Inferno, and TempoTec HIFIER sound cards. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 07:03:04 +0000