aboutsummaryrefslogtreecommitdiff
path: root/sound/pci
AgeCommit message (Collapse)Author
2008-06-27ALSA: ymfpci - fix initial volume for 44.1kHz outputTakashi Iwai
YDSXGR_BUF441OUTVOL register isn't initialized properly. This may lead to a silent output at full volume of unchanged "Wave Playback Volume". http://bugzilla.kernel.org/show_bug.cgi?id=10963 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-27ALSA: hda - Add MacBook 3.1 supportTakashi Iwai
MacBook 3.1 is compatible with model=mbp3. Added the codec SSID 10b6:3600. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26ALSA: PCI168 snd-azt3328: some more fixupsAndreas Mohr
- fix problem with codec register 0x6a being write-only by adding a software shadow register (caused annoying noise after module loading due to _toggling_ between gameport and audio bits instead of configuring them properly) - rename several "Wave" mixer controls to "PCM", since this is what Wine and several other apps are looking for (IOW, _requiring_) and this is what AC97 specs use as naming, too, thus I'd guess it's what these controls are - cleanup, small optimizations Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26ALSA: trident - pause s/pdif outputPierre Ossman
Stop the S/PDIF DMA engine and output when the device is told to pause. It will keep on looping the current buffer contents if this isn't done. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Tested-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26ALSA: hda - Added SSID for 'Fujitsu Siemens Amilo M1451G' laptopTravis Place
Add the SSID for the "Fujitsu Siemens Amilo M1451G" laptop to patch_realtek.c , so that it uses ALC880_FUJITSU by default. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26ALSA: hda - Added model selection for iMac 24"Travis Place
Added the SSID of a known iMac 24" to automatically use ALC885_IMAC24 quirk. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-23ALSA: aw2 - Fix Oops at initializationTakashi Iwai
The irq handler may be called before the proper initialization of hardware. Call snd_aw2_saa7146_setup() before the irq handler registration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-20ALSA: hda - Fix digital converter proc outputTakashi Iwai
AC_VERB_GET_DIGI_CONVERT_2 isn't actually implemented but reserved. The whole SIC bits are returned from DIGI_CONVERT_1. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-18ALSA: ca0106 - Add entry for another MSI K8N Diamond MBTakashi Iwai
Added an entry for another MSI K8N Diamond mobo with SSID 1102:1009. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-18ALSA: hda - Fix wrong volumes in AD1988 auto-probe modeTakashi Iwai
Don't create mixer volume elements for Headphone and Speaker if they use the same DAC as normal line-outs on AD1988. Otherwise the amp value gets screwed up, e.g. https://bugzilla.novell.com/show_bug.cgi?id=398255 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-17ALSA: emu10k1 - simplify the last fixTakashi Iwai
Clean up the previous commit for fixing memory leaks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-17ALSA: emu10k1 - fix possible memory leak in memory allocation routinesJaroslav Kysela
The leak was introduced in "[ALSA] emu10k1 - simplify page allocation for synth" commit. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-16sound: oxygen: fix NULL pointer dereference when loading snd-oxygenClemens Ladisch
Check that model->control_filter is set before trying to call it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-16ALSA: Remove duplicate MODULE_AUTHOR/DESCRIPTION/LICENCE from snd-ens1370.koJaroslav Kysela
But comment only extra code in ak4531_codec.c for history. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-16ALSA: hda - use upper_32_bits()Takashi Iwai
Use the standard upper_32_bits() instead of own macro. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-16ALSA: hda - bdl_pos_adj=32 as defaultTakashi Iwai
Use bdl_pos_adj=32 as default except for Intel hardwares confirmed to work with bdl_pos_adj=1. Looks like ATI and NVidia require this higher value. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-16ALSA: hda: Add support for 92HD73xxx codecsMatthew Ranostay
Added support for new family of IDT codecs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - Remove unused mutexTakashi Iwai
Removed unused mutex from patch_*.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - Fix stac9205_cfg_tblTakashi Iwai
Sort stac9205_cfg_table in the order of id numbers, and removed the duplicated (obsoleted) entries for 0x01fc and 0x01fd. This doesn't change the driver behavior since the old entries are all secondary. The duplication occured due to commit dfe495d0, and the old entries were introduced by commit ae0a8ed8. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - Add a warning if pending IRQ is foundTakashi Iwai
The pending IRQ handling is a very hackish workaround and should be avoided as much as possible via a larger bdl_pos_adj option value. Put a warning message if this situation occurs so that the user may have a chance to notice that something is wrong. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - Fix bdl_pos_adj value for ATI SB chipsetsTakashi Iwai
ATI SB controllers seem to report the DMA ahead in the amount of FIFO. Thus bdl_pos_adj should be 32 for them as default. Also, the default value is set to -1, which means to make the driver to choose the appropriate value. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - bdl_pos_adj option to each instanceTakashi Iwai
The option bdl_pos_adj should be provided for each card instance instead of a global one because the value depends rather on each controller-chip. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - remove position_fix=3Takashi Iwai
position_fix=3 is the option to correct the DMA position with the FIFO size. But, it never worked correctly, and we have now more other workarounds for the DMA position fixes. Thus better to remove it. Also, change POS_FIX_NONE to POS_FIX_LPIB to represent its real role better. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: hda - Add bdl_pos_adj optionTakashi Iwai
Added a new option, bdl_pos_adj, to adjust the delay of IRQ-wakeup timing. Most HD-audio hardwares have a problem that a BDL IRQ is issued before actually the data and the DMA pointer are updated. We have already a mechanism to force to delay snd_pcm_period_elapsed() calls via workq, but this costs much CPU, and typically the delay is within one sample. Thus, it's more clever to adjust the BDL entries instead. The new option adds the size of the delay in frames. As default, it's set to 1 -- that is, one sample delay. Even the hardware is really correct, one sample delay is relatively harmless in comparison with reporting wrong positions. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13ALSA: emu10k1 - Fix page allocation with GFP_DMATakashi Iwai
Added the missing GFP_ATOMIC to page_alloc when called with GFP_DMA. GFP_KERNEL often results in stalls for ZONE_DMA, so GFP_ATOMIC is more prgmatic. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13[ALSA] hda - Add Toshiba dynabook SS RX1 supportAkio Idehara
I have Toshiba dynabook SS RX1 and this patch adds that support. Signed-off-by: Akio Idehara <zbe64533@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13[ALSA] ac97 - Fix power_save option value as time-outTakashi Iwai
The power_save option was set as boot although it was meant to be a timeout value like the same option of snd-hda-intel originally. Now fixed to the same style. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-13[ALSA] ac97: add support for wm9711 master left inv switchJuergen Beisert
This patch adds support for Master Left Inv Switch on wm9711. At least required to drive the mono speaker on the PXA270 platfrom Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-09[ALSA] hda - Fix "alc262_sony_unsol[]" hda_verb arrayAkio Idehara
I think that hda_verb array must have "terminator (empty array)". But alc262_sony_unsol[] does not have it. And it causes gcc-4.3's buggy behavior with snd_hda_sequence_write(). Signed-off-by: Akio Idehara <zbe64533@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-06[ALSA] maestro3: Fix hw volume on HP OmniBookVille Syrjälä
Make the hw volume buttons work correctly on some HP OmniBook laptops. The original quirk was apparently applied a bit too early and it was also lacking some critial register writes. This improved sequence was discovered by trial and error (like the original sequence). Tested and found working on OB500 and OB6000 laptops. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-06[ALSA] hda - increase max_codecs of ICH to 4Takashi Iwai
It turned out that some ICH9-based boards use SD3 for the audio codec where the current driver code doesn't probe. Since we have a better codec slot check now, it must be safe to increase this to 4. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-06[ALSA] hda - Fix PLL gating control on Realtek codecsTakashi Iwai
On some Realtek codecs, the analog PLL gating control bit must be set off while the default value is 1. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-06[ALSA] hda - support intel DG33 motherboardsJiang zhe
These two motherboards's pin configuration are not covered by driver. I wrote a new model to support them. Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-06sound: emu10k1 - fix system hang with Audigy2 ZS Notebook PCMCIA cardJaroslav Franek
When the Linux kernel is compiled with CONFIG_DEBUG_SHIRQ=y, the Soundblaster Audigy2 ZS Notebook PCMCIA card causes the system hang during boot (udev stage) or when the card is hot-plug. The CONFIG_DEBUG_SHIRQ flag is by default 'y' with all Fedora kernels since 2.6.23. The problem was reported as https://bugzilla.redhat.com/show_bug.cgi?id=326411 The issue was hunted down to the snd_emu10k1_create() routine: /* pseudo-code */ snd_emu10k1_create(...) { ... request_irq(... IRQF_SHARED ...) { register the irq handler #ifdef CONFIG_DEBUG_SHIRQ call the irq handler: snd_emu10k1_interrupt() { poll I/O port // <---- !! system hangs ... } #endif } ... snd_emu10k1_cardbus_init(...) { initialize I/O ports } ... } The early access to I/O port in the interrupt handler causes the freeze. Obviously it is necessary to init the I/O ports before accessing them. This patch moves the registration of the irq handler after the initialization of the I/O ports. Signed-off-by: Jaroslav Franek <jarin.franek@post.cz> Acked-by: James Courtier-Dutton <James@superbug.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-04[ALSA] hda - COMPAL IFL90/JFL-92 laptop quirkTony Vroon
Use quirk table to assign ALC268_TOSHIBA to COMPAL IFL90/JFL-92 laptops. No analog output on autoprobe. Signed-off-by: Tony Vroon <tony@linx.net> Tested-by: Guri <gurashka@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-03[ALSA] hda - Fix resume of auto-config mode with Realtek codecsTakashi Iwai
The auto-config mode of Realtek ALC codecs has a bug since 2.6.25 that it cannot resume properly. The problem was the wrong assignment of init_hook that overrides the whole initialization. Relevant bug reports: http://bugzilla.kernel.org/show_bug.cgi?id=10662 https://bugzilla.novell.com/show_bug.cgi?id=385473 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-06-02[ALSA] emu10k1 - Fix inverted Analog/Digital mixer switch on Audigy2Takashi Iwai
On Audigy2 Platinum, the Analog/Digital mixer switch is inverted. https://bugzilla.novell.com/show_bug.cgi?id=396204 The patch adds a simple workaround. There might be another device requiring a similar fix, too (or fix for audigy2 generically), but right now I fix only the known broken one. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30[ALSA] hda - Fix model for LG LS75 laptopTakashi Iwai
Set the proper model for LG LS75 with CM9880 codec. See ALSA bug#2105: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2105 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30[ALSA] hda - Fix mic input on HP2133Takashi Iwai
The mic pins are wrongly assigned on AD1884A mobile model. The mic handling is fixed for the automatic mic selection, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30[ALSA] ac97 - Fix ASUS A9T laptop outputTakashi Iwai
ASUS A9T laptop uses line-out pin as the real front-output while other devices use it as the surround. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30[ALSA] emu10k1 - simplify page allocation for synthTakashi Iwai
Simplify the page allocation of emu10k1 driver for emux synth support. Since these pages aren't be necessarily coherent, we can avoid expensive DMA-coherent routines. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30[ALSA] trident - clean up obsolete synth codesTakashi Iwai
Clean up the unused synth codes in the memory handling of trident driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30[ALSA] Make ak4531 local to ens1370 driverTakashi Iwai
The ak4531 module is used only by ens1370 driver (and unlikely that any other will use it ever). Let's make it local to ens1370. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30[ALSA] Clean up sound/pci/ac97/MakefileTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - Fix EAPD and COEF setups for realtek codecsKailang Yang
Fixed EAPD and COEF setups for Realtek ALC662/663, 660-VD and 888 codecs. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - show correct codec chip in PCM stream namesKailang Yang
Show more exact codec chip name in the PCM stream name strings. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - Fix vref pincap check in alc882 auto-detectionKailang Yang
Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - Add ALC663 supportKailang Yang
Added the support of ALC663 codec, including specific models for ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - Add ICH9 controller support (8086:2911)Kailang Yang
Added the missing PCI ID for ICH9 controller (8086:2911) Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-27[ALSA] hda - Add support of Teradici controllerKailang Yang
Add the new PCI ID 0x6549 0x1200 Teradici controller. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-04 16:49:07 +0000