aboutsummaryrefslogtreecommitdiff
path: root/sound/pci
AgeCommit message (Collapse)Author
2009-08-24ALSA: hda - Reuse ALC268 parser for ALC269Takashi Iwai
Reuse a part of the code of ALC268 parser for ALC269. This will change the default output volume either to Front or Speaker depending on the pin configuration. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24sound: vx222: fix input level control range checkClemens Ladisch
Fix a logic error in the range check of the input level control that would prevent setting any volume less than the maximum. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-24ALSA: hda: move open coded tricks into get_wcaps_channels()Wu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-23ALSA: ali5451: remove dead codeBartlomiej Zolnierkiewicz
Remove code covered by #if/endif 0 and #ifdef/endif CODEC_RESET (CODEC_RESET is never defined). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-23ALSA: ali5451: fix timeout handling in snd_ali_{codecs,timer}_ready()Bartlomiej Zolnierkiewicz
Modify loops in such way that the register value is checked also after the timeout condition, just in case the heavy interrupt load etc. caused the thread to sleep for the time period exceeding the timeout value. While at it remove an extra ALI_STIMER read from snd_ali_stimer_ready(). Reported-by: Jack Byer <ojbyer@usa.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-20Merge branch 'fix/hda' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix probe of Toshiba laptops with ALC268 codec ALSA: hda: add model for Intel DG45ID/DG45FC boards ALSA: hda: enable speaker output for Compaq 6530s/6531s
2009-08-19Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-08-19ALSA: hda - Fix probe of Toshiba laptops with ALC268 codecTakashi Iwai
There are many variants of Toshiba laptops with ALC268 codec, and it seems that a few of them don't work with model=toshiba preset since they have the secondary ALC268 codec just for HDMI output. This is a regression due to the previous clean-up work to merge all Toshiba quirk entries into a single check. This patch adds the identification of such laptops to apply the standard BIOS-probing method. Unfortunately, Toshiba laptops have all the same PCI SSID, so we need to check the codec SSID to identify each device. Tested-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-19Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-08-19ALSA: hda: add model for Intel DG45ID/DG45FC boardsWu Fengguang
The BIOS pin configs are in fact correct and shall not be overwritten. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-19ALSA: hda: enable speaker output for Compaq 6530s/6531sWu Fengguang
HP Compaq 6530s and 6531s internal speaker is silence or becomes silence within 1 minute after fresh boot. It is found that pin 0x1c must be set to PIN_OUT mode to make the speaker work. This is weird - line-in pin 0x1c and speaker pin 0x16 seem to be unrelated. The codec differences before/after patch are: @@ Node 0x17 [Pin Complex] wcaps 0x40020b: Pin Default 0x41a6e130: [N/A] Mic at Ext Rear Conn = Digital, Color = White DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE - Pin-ctls: 0x24: IN + Pin-ctls: 0x40: OUT @@ Node 0x1c [Pin Complex] wcaps 0x40018d: Pin Default 0x41813021: [N/A] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0x1 - Pin-ctls: 0x24: IN VREF_80 + Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x24 Tests show that it won't impact (external) Mic recording. Reported-by: "Lin, Ming M" <ming.m.lin@intel.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-19ALSA: hda - Fix invalid capture mixers with some ALC268 modelsTakashi Iwai
The auto-mic clean-up patches caused regressions on some ALC268 models that have no proper input_mux but with "Input Source" mixer elements. Such a combination results in Oops when accessed. [A reason why set_capture_mixer() isn't used in patch_alc268() is that ALC268 codec have HDA_OUTPUT direction for capture volumes unlike other codecs. Thus it needs own definitions of capture elements.] This patch fixes the issues: - Add a capture mixer definition without input-source - Use the new capture mixer appropriately Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-15ALSA: hda - Add missing num_adc_nids definition for IDT92HD8xxxTakashi Iwai
The previous fix removed the definition of num_adc_nids wrongly, and this resulted in the missing input-source control. Now readded again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-13ALSA: hda - Fix / clean up IDT92HD83xxx codec parserTakashi Iwai
A few improvements for IDT 92HD83xxx codec pareser: - Remove unused / deprecated mixer-amp controls - Handle d-mics as normal inputs since this codec has no separate MUXes for analog and digital - Don't create duplicated controls for capture volumes with Mux capture volumes Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-13Merge branch 'topic/hda-dmic-fix' into topic/hdaTakashi Iwai
2009-08-13ALSA: hda - Enable line-out detection only with speakersTakashi Iwai
Enable line-out detection for IDT/STAC codecs only when speaker pins exist. In some cases, the speaker itself is identified as line-out, and this confuses the situation. Only the extra line-outs should do auto-muting. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-12ALSA: hdsp - allow proc reporting with disconnected io boxTim Blechmann
the hdsp driver refuses to report any information via the proc interface, if the io box is not connected. with this patch, the content of the control and status registers is printed before the iobox check. Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-12Merge branch 'fix/hda' into for-linusTakashi Iwai
* fix/hda: ALSA: hda - Don't override ADC definitions for ALC codecs ALSA: hda - Add missing vmaster initialization for ALC269
2009-08-12ALSA: hda - fix noise issue when recording from digital mic with alc268Herton Ronaldo Krzesinski
With auto config model of alc268 realtek codec, it allows to select any of possible available digital microphone inputs when only one is available. For example, when only digital mic in nid 0x12 is available, on second input source it will allow you to select unavailable digital mic in nid 0x13. The problem is that selecting unavailable digital mic creates a source of noise when recording (I'm not sure if this happens on all machines with alc268 and only one digital mic input, but testing on a quanta uw1 netbook a lot of noise is introduced in recording from digital mic 0x12/first input source, when you select the unavailable digital mic 0x13 for capture source 0x24 in the second input source in mixer). Then to avoid noise when recording from digital mic with auto model in this case, prevent a digital mic input source to be selected if microphone is not available. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-11ALSA: hda - Clean up init and setup hooks for Realtek codecsTakashi Iwai
Move static codes to setup from init_hook for each model. Also, use the common auto-mic selection helper for devices that support auto-mic selection. They just need to set up ext_mic, int_mic and auto_mic flag in the setup section. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-11ALSA: hda - Add setup hook to ALC preset structTakashi Iwai
Added setup hook to ALC preset struct to be called at in the parser but not at each init callback. This can be used for setting up the static pins, etc, while the init hook should be used for updating the status again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-11ALSA: hda - Add a white-list for MSI optionTakashi Iwai
Created a white-list to enable MSI since some devices require MSI explicitly due to BIOS/ACPI problems. Simply using a quirk list. As the first case, take HP Compaq CQ40. Reference: Novell bnc#529971 https://bugzilla.novell.com/show_bug.cgi?id=529971 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-11ALSA: hda - Check connectivity for auto-mic of Realtek codecsTakashi Iwai
Some Realtek codecs don't provide the full connections for certain pins from each ADC; e.g. ACL662/ALC272 gives only one of two digital-mic pins for each ADC. Thus, depending on the digital mic pin, the ADC/MUX to be used has to be chosen properly. This patch adds the check of the connectivity of pins at auto-mic mode. If no proper connectivity is found, auto_mic flag is turned off to be sure. Also the mux_idx is determined during this check so it won't be checked in the unsol event any more. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-11Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-08-11ALSA: hda - Don't override ADC definitions for ALC codecsTakashi Iwai
ALC269 and ALC861-VD parsers override the ADC definitions unconditionally without checking the spec definition. This causes the problem when any inconsistent ADC is set up in the device quirk (like ALC272 with digital-mic). This patch avoids the overriding by adding the proper checks. Reference: Novell bnc#529467 https://bugzilla.novell.com/show_bug.cgi?id=529467 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-10ALSA: hda - Use only one capture stream for auto-micTakashi Iwai
When the auto-mic feature is enabled, we should support only one capture stream. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-10ALSA: hda - Add auto-mic support for Realtek codecsTakashi Iwai
Added the support for automatic mic selection via plugging for Realtek codecs (in auto-probing mode). The auto-mic mode is enabled only when one internal mic and one external mic are present. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-10sound: ymfpci: increase timer resolution to 96 kHzClemens Ladisch
Allow the interval timer to be programmed with its full 96 kHz precision. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-10Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-08-10ALSA: hda - Add missing vmaster initialization for ALC269Takashi Iwai
Without the initialization of vmaster NID, the dB information got confused for ALC269 codec. Reference: Novell bnc#527361 https://bugzilla.novell.com/show_bug.cgi?id=527361 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-08-10ALSA: hda - Fix Oops due to STAC/IDT auto-mic changesTakashi Iwai
The previous auto-mic patch for STAC/IDT codecs causes the Oops on machines without digital mic pins. This patch fixes the problem. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-06ALSA: hda - Add quirks for some HP laptopsTakashi Iwai
The new HP laptops have PCI SSID 103c:701x and requires model=hp-dv5. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-04Merge branch 'fix/hda' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Read buffer overflow ALSA: hda: Correct EAPD for Dell Inspiron 1525 ALSA: hda: warn on spurious response ALSA: hda: remember last command for each codec ALSA: hda: read CORBWP inside reg_lock ALSA: hda: take reg_lock in azx_init_cmd_io/azx_free_cmd_io ALSA: hda: take cmd_mutex in probe_codec() ALSA: hda: track CIRB/CORB command/response states for each codec ALSA: hda - Fix quirk for Toshiba Satellite A135-S4527
2009-08-04ALSA: hda - Fix line-out jack handling with STAC/IDT codecTakashi Iwai
When the line-out jack is plugged/unplugged, the driver needs to check the headphone plug, not only the line-out jack itself. Otherwise the headphone or the speaker may be wrongly muted/unmuted. As a result, both STAC_HP_EVENT and STAC_LO_EVENT need to call the same function, stac92xx_hp_detect(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03ALSA: hda - Fix line-out jack detectionTakashi Iwai
The commit fefd67f31ee7f5259344e36a237d59b47e8715cf ALSA: hda - Add line-out jack detection on IDT/STAC codecs enabled wrong pins for jack detections. Fixed to the correct ones. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2009-08-03ALSA: hda: add IbexPeak/Clarkdale HDMI model with static cvt/pin numberWu Fengguang
The new IbexPeak HDMI codec has 3 pin nodes and 2 converter nodes. Here we assume only the first ones will be used. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03ALSA: hda - Read buffer overflowRoel Kluin
Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03ALSA: hda: Correct EAPD for Dell Inspiron 1525Chengu Wang
The commit 24918b61b55c21e09a3e07cd82e1b3a8154782dc statically changes the model from dell-bios to dell-3stack to solve the sound decreasing regression (http://lkml.org/lkml/2008/9/12/203), however it leads to another problem that the 2nd headphone jack doesn't work (https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3987). So I think the commit 249**2dc is just a workaround. I would like to give a true solution here. The datasheet for STAC9228 says, GPIO2 is the same pin as VOL DOWN, and the EAPD pin is GPIO0. This is why the sound decreases if we set EAPD as GPIO2. This patch changes EAPD to GPIO0 to solve the problem. Signed-off-by: Chengu Wang <wangchengu@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03ALSA: hda: warn on spurious responseWu Fengguang
To help disclose hardware bugs. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03ALSA: hda: remember last command for each codecWu Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03ALSA: hda: read CORBWP inside reg_lockWu Fengguang
This converts the last CORBWP access outside of reg_lock. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03ALSA: hda: take reg_lock in azx_init_cmd_io/azx_free_cmd_ioWu Fengguang
Just for safety. azx_init_cmd_io() and azx_free_cmd_io() may be called when switching to single command mode. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03ALSA: hda: take cmd_mutex in probe_codec()Wu Fengguang
Now that each codec will have its own module, it is possible for the user to load one codec while another one is running. So cmd_mutex would be a safe addition to probe_codec(). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03ALSA: hda: track CIRB/CORB command/response states for each codecWu Fengguang
Recently we hit a bug in our dev board, whose HDMI codec#3 may emit redundant/spurious responses, which were then taken as responses to command for another onboard Realtek codec#2, and mess up both codecs. Extend the azx_rb.cmds and azx_rb.res to array and track each codec's commands/responses separately. This helps keep good codec safe from broken ones. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-03ALSA: hda - Fix quirk for Toshiba Satellite A135-S4527Takashi Iwai
Use model=lenovo instead of model=dallas for Toshiba Satellite A135-S4527 with ALC861-VD codec. Reference: Novell bnc#526325 https://bugzilla.novell.com/show_bug.cgi?id=526325 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-31Merge branch 'fix/hda' into for-linusTakashi Iwai
* fix/hda: ALSA: hda - Increase PCM stream name buf in patch_realtek.c ALSA: hda: fix out-of-bound hdmi_eld.sad[] write ALSA: hda - Add quirk for Dell Studio 1555
2009-07-31ALSA: hda - Increase PCM stream name buf in patch_realtek.cTakashi Iwai
The name buf with size 16 is too short for some codec names, e.g. truncated like "ALC861-VD Analo". Now the size is doubled. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-30Merge branch 'topic/hda-cirrus' into topic/hdaTakashi Iwai
2009-07-30Merge branch 'fix/hda' into topic/hdaTakashi Iwai
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 20:58:08 +0000