aboutsummaryrefslogtreecommitdiff
path: root/sound/pci
AgeCommit message (Collapse)Author
2009-06-08ALSA: ctxfi - Fix / clean up hw20k2 chip codeTakashi Iwai
- Clean up Hungarian coding style - Don't use static variables for I2C information; this unables to use multiple instances. Now they are stored in struct hw20k2 fields. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-08ALSA: ctxfi - Fix possible buffer pointer overrunTakashi Iwai
Fix possible buffer pointer overruns. Back to zero when it's equal or over the buffer size. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-08ALSA: ctxfi - Remove useless initializations and castTakashi Iwai
Remove useless variable initializations and cast at the beginning of functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-08ALSA: ctxfi - Fix DMA mask for emu20k2 chipTakashi Iwai
Allow 64bit DMA mask for emu20k2 chip, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-08ALSA: ctxfi - Make volume controls more intuitiveTakashi Iwai
Change the volume control to dB scale (as the raw data seems so). Also added the TLV dB-scale information. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-08ALSA: ctxfi - Optimize the native timer handling using wc counterTakashi Iwai
Optimize the timer update routine to look up wall clock once instead of checking the position of each stream at each timer update. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05ALSA: ctxfi - Add missing inclusion of linux/math64.hTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05ALSA: ctxfi - Set device 0 for mixer control elementsTakashi Iwai
Mixer control elements are usually assigned to device 0. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05ALSA: ctxfi - Clean up / optimizeTakashi Iwai
- Use static tables instead of assigining each funciton pointer - Add __devinit* to appropriate places; pcm, mixer and timer cannot be marked because they are kept in the function table that lives long - Move create_alsa_devs function out of struct ct_atc to mark it __devinit Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05ALSA: ctxfi - Set periods_min to 2Takashi Iwai
Set 2 to minimal periods of playback pcm setups, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05ALSA: ctxfi - Use native timer interrupt on emu20k1Takashi Iwai
emu20k1 has a native timer interrupt based on the audio clock, which is more accurate than the system timer (from the synchronization POV). This patch adds the code to handle this with multiple streams. The system timer is still used on emu20k2, and can be used also for emu20k1 easily by changing USE_SYSTEM_TIMER to 1 in cttimer.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05ALSA: ctxfi - Fix previous fix for 64bit DMATakashi Iwai
Remove unneeded substitution to 32bit int to make it really working. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05ALSA: ctxfi - Fix endian-dependent codesTakashi Iwai
The UAA-mode check in hwct20k1.c is implemented with the endian-dependent codes. Fix to be more portable (and readable). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05ALSA: ctxfi - Allow 64bit DMATakashi Iwai
emu20kx chips support 64bit address PTE. Allow the DMA bit mask to accept 64bit address, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02Merge branch 'topic/ctxfi-fix' into topic/ctxfiTakashi Iwai
2009-06-02ALSA: ctxfi - Support SG-buffersTakashi Iwai
Use SG-buffers instead of contiguous pages. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: ctxfi - Remove PAGE_SIZE limitationTakashi Iwai
Remove the limitation of PAGE_SIZE to be 4k by defining the own page size and macros for 4k. 8kb page size could be natively supported, but it's disabled right now for simplicity. Also, clean up using upper_32_bits() macro. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: ctxfi - Fix supported PCM formatsTakashi Iwai
The device seems supporting only U8, S16, S24_3LE, S32. Other linear formats result in bad outputs. Also, added the support for 32bit float format, which wasn't listed in the original code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: ctxfi - Fix PCM device namingTakashi Iwai
PCM names for surround streams should be also fixed as well as the mixer element names. Also, a bit clean up for PCM name setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: ctxfi - Fix surround mixer namesTakashi Iwai
We usually pick up "Surround" mixer for the rear output, and "Side" for the extra surround. Fix the channel mapping to follow it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: ALSA: ctxfi - Release PCM resources at each prepare callTakashi Iwai
The prepare callback can be called multiple times, thus it needs to release and acquire the resource again by itself at the second or later call. Simply add pcm_release_resources() at the beginning of each prepare callback in ctatc.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: ctxfi - Fix a typo in MODULE_LICENSETakashi Iwai
A space has to be put between GPL and v2. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02ALSA: ctxfi - Fix Oops at mmappingTakashi Iwai
Replace a spinlock with a mutex protecting the vm block list at mmap / munmap calls, which caused Oops like below: BUG: sleeping function called from invalid context at mm/slub.c:1599 in_atomic(): 0, irqs_disabled(): 1, pid: 32065, name: xine Pid: 32065, comm: xine Tainted: P 2.6.29.4-75.fc10.x86_64 #1 Call Trace: [<ffffffff81040685>] __might_sleep+0x105/0x10a [<ffffffff810c9fae>] kmem_cache_alloc+0x32/0xe2 [<ffffffffa08e3110>] ct_vm_map+0xfa/0x19e [snd_ctxfi] [<ffffffffa08e1a07>] ct_map_audio_buffer+0x4c/0x76 [snd_ctxfi] [<ffffffffa08e2aa5>] atc_pcm_playback_prepare+0x1d7/0x2a8 [snd_ctxfi] [<ffffffff8105ef3f>] ? up_read+0x9/0xb [<ffffffff81186b61>] ? __up_read+0x7c/0x87 [<ffffffffa08e36a6>] ct_pcm_playback_prepare+0x39/0x60 [snd_ctxfi] [<ffffffffa0886bcb>] snd_pcm_do_prepare+0x16/0x28 [snd_pcm] [<ffffffffa08867c7>] snd_pcm_action_single+0x2d/0x5b [snd_pcm] [<ffffffffa08881f3>] snd_pcm_action_nonatomic+0x52/0x6a [snd_pcm] [<ffffffffa088a723>] snd_pcm_common_ioctl1+0x404/0xc79 [snd_pcm] [<ffffffff810c52c8>] ? alloc_pages_current+0xb9/0xc2 [<ffffffff810c9402>] ? new_slab+0x1a5/0x1cb [<ffffffff810ab9ea>] ? vma_prio_tree_insert+0x23/0xc1 [<ffffffffa088b411>] snd_pcm_playback_ioctl1+0x213/0x230 [snd_pcm] [<ffffffff810b6c20>] ? mmap_region+0x397/0x4c9 [<ffffffffa088bd9b>] snd_pcm_playback_ioctl+0x2e/0x36 [snd_pcm] [<ffffffff810ddc64>] vfs_ioctl+0x2a/0x78 [<ffffffff810de130>] do_vfs_ioctl+0x462/0x4a2 [<ffffffff81029cef>] ? default_spin_lock_flags+0x9/0xe [<ffffffff81374647>] ? trace_hardirqs_off_thunk+0x3a/0x6c [<ffffffff810de1c5>] sys_ioctl+0x55/0x77 [<ffffffff8101133a>] system_call_fastpath+0x16/0x1b Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-26ALSA: ctxfi - Add missing module parameter definitionsTakashi Iwai
Added missing module_param*() and MODULE_PARM*(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-20ALSA: ctxfi - Add depends on X86Takashi Iwai
The ctxfi driver requires explicitly the 4k page size, and gives a build error on architectures with non-4k pages. As a workaround, just add the kconfig dependency on X86, which is the only architecture ever tested. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14ALSA: ctxfi - Add prefix to debug printsTakashi Iwai
Added ctxfi: prefix to each debug print. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14ALSA: ctxfi - Avoid unneeded pci_read_config_*() callsTakashi Iwai
Use struct pci subsystem_device and revision fields instead of unneeded calls of pci_read_config_*(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14ALSA: ctxfi - Move PCI ID definitions to linux/pci_ids.hTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14ALSA: ctxfi - Add missing inclusion of linux/delay.hTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14ALSA: SB X-Fi driver mergeWai Yew CHAY
The Sound Blaster X-Fi driver supports Creative solutions based on 20K1 and 20K2 chipsets. Supported hardware : Creative Sound Blaster X-Fi Titanium Fatal1ty® Champion Series Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series Creative Sound Blaster X-Fi Titanium Professional Audio Creative Sound Blaster X-Fi Titanium Creative Sound Blaster X-Fi Elite Pro Creative Sound Blaster X-Fi Platinum Creative Sound Blaster X-Fi Fatal1ty Creative Sound Blaster X-Fi XtremeGamer Creative Sound Blaster X-Fi XtremeMusic Current release features: * ALSA PCM Playback * ALSA Record * ALSA Mixer Note: * External I/O modules detection not included. Signed-off-by: Wai Yew CHAY <wychay@ctl.creative.com> Singed-off-by: Ryan RICHARDS <ryan_richards@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-04Merge branch 'fix/misc' into for-linusTakashi Iwai
* fix/misc: ALSA: indigo-express: add missing 64KHz flags
2009-04-28ALSA: Add missing SNDRV_PCM_INFO_BATCH flag to some driversTakashi Iwai
Added SNDRV_PCM_INFO_BATCH flag to PCM info field of some drivers that really don't give the precise pointer value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-28ALSA: indigo-express: add missing 64KHz flagsGiuliano Pochini
Indigo-express cards also support 64KHz sampling rate: this patch adds missing SNDRV_PCM_RATE_64000 flags. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-27Merge branch 'fix/misc' into for-linusTakashi Iwai
* fix/misc: ALSA: Fix Trivial Warnining in sound/pci/cmipci.c
2009-04-27Merge branch 'fix/hda' into for-linusTakashi Iwai
* fix/hda: ALSA: hda - Fix init verbs of AD1884A mobile model
2009-04-27ALSA: Fix Trivial Warnining in sound/pci/cmipci.cSubrata Modak
Fixed the compile warning below by initializatin iomidi variable properly. sound/pci/cmipci.c: In function ‘snd_cmipci_probe’: sound/pci/cmipci.c:3017: warning: ‘iomidi’ may be used uninitialized in this function Signed-off-by: Subrata Modak <subrata@linux.vnet.ibm.com> Cc: linux-pci <linux-pci@atrey.karlin.mff.cuni.cz> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Sachin P Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-23ALSA: hda - Fix init verbs of AD1884A mobile modelTakashi Iwai
The current ad1884a-mobile model has a problem that the speaker output doesn't work sometimes after boot or power-saving on some HP laptops. It seems that the verbs accessing to the non-functional widgets cause this problem. This patch simplifies the init verbs for mobile model not to touch unnecessary setups so that it avoids the speaker-mute problem. Reference: Novell bnc#495668 https://bugzilla.novell.com/show_bug.cgi?id=495668 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-22Merge commit 'alsa/master' into for-linusTakashi Iwai
* commit 'alsa/master': [ALSA] intel8x0: another attempt to fix ac97_clock measure routine [ALSA] ac97_codec: increase timeout for analog subsections
2009-04-21Merge branch 'fix/hda' into for-linusTakashi Iwai
* fix/hda: ALSA: hda - Add quirk for Packard Bell RS65
2009-04-21ALSA: hda - Add quirk for Packard Bell RS65Takashi Iwai
Added a quirk (model=m51va) for Packard Bell RS65 with ALC663. Reference: Novell bnc#496787 https://bugzilla.novell.com/show_bug.cgi?id=496787 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-21[ALSA] intel8x0: another attempt to fix ac97_clock measure routineJaroslav Kysela
Appearently, a big delay ~300ms is required before hw is settled and ready to transfer samples on some hardware variants. Also, return back "clocking to 48000Hz" message when something fails. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-04-21[ALSA] ac97_codec: increase timeout for analog subsectionsJaroslav Kysela
On some hardware platforms, the AC97 codec requires more time to wake up. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-04-21Merge branch 'fix/misc' into for-linusTakashi Iwai
* fix/misc: ALSA: Atiixp: Add SSID for mute_led quirk (unknown HP model)
2009-04-21Merge branch 'fix/hda' into for-linusTakashi Iwai
* fix/hda: ALSA: hda - Add quirks for Realtek codecs ALSA: hda - Fix alc662_init_verbs
2009-04-21ALSA: hda - Add quirks for Realtek codecsKailang Yang
- Support ASUS F81Se F5Q P80 U20A U80 U50 UX50 for ALC269 - Support ASUS F70SL UX20 X58LE F50Z N80Vc N81Te N505Tp Vx3V N5051A for ALC663 - Support DELL ZM1 for ALC272 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-21ALSA: hda - Fix alc662_init_verbsKailang Yang
Don't unmute unneeded amps for input mixers of ALC662 & co. It caused possible recording noises. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-20ALSA: Atiixp: Add SSID for mute_led quirk (unknown HP model)Daniel T Chen
Reference: Ubuntu #84973 (https://launchpad.net/bugs/84973) Reference: Linux #8001 (http://bugzilla.kernel.org/show_bug.cgi?id=8001) Make the mute LED function properly on this unknown HP model. Signed-off-by: Daniel T Chen <seven.steps@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-19Merge branch 'fix/misc' into for-linusTakashi Iwai
* fix/misc: ALSA: MAINTAINERS - Update SOUND ALSA: emu10k1 - off by 1 in snd_emu10k1_wait()
2009-04-19Merge branch 'fix/intel8x0' into for-linusTakashi Iwai
* fix/intel8x0: ALSA: Intel8x0: Add hp_only quirk for SSID 0x1028016a (Dell Inspiron 8600) ALSA: Intel8x0: Remove conflicting quirk for SSID 0x103c0934
2009-04-17ALSA: hda - Set function_id only on FG nodesTakashi Iwai
(Re)set function_id only from the value on FG nodes. The current code overrides the value with the last widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 14:26:45 +0000