aboutsummaryrefslogtreecommitdiff
path: root/sound/soc/pxa
AgeCommit message (Collapse)Author
2010-04-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: mixart: range checking proc file ALSA: hda - Fix a wrong array range check in patch_realtek.c ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_stream ALSA: hda - Enable amplifiers on Acer Inspire 6530G ASoC: Only do WM8994 bias off transition from standby ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devices ASoC: Don't do runtime wm_hubs DC servo updates if using offset correction ASoC: Support second DC servo readback method for wm_hubs ASoC: Avoid wraparound in wm_hubs DC servo correction ALSA: echoaudio - Eliminate use after free ALSA: i2c: cleanup: change parameter to pointer ALSA: hda - Add MSI blacklist for Aopen MZ915-M ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with recent ALSA PCM code ALSA: hda - Update document about MSI and interrupts ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981 ALSA: hda - Add missing printk argument in previous patch ASoC: Fix passing platform_data to ac97 bus users and fix a leak ALSA: hda - Fix ADC/MUX assignment of ALC269 codec ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo() ASoC: wm8994: playback => capture
2010-04-05ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_streamDaniel Mack
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. [Note that this is a backported version for 2.6.34. Upstream commit is fd23b7dee] Signed-off-by: Daniel Mack <daniel@caiaq.de> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Michael Hirsch <m.hirsch@raumfeld.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-08Merge branch 'origin' into devel-stableRussell King
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-03-02ASoC: Remove legacy SSP API usage from pxa-ssp.cEric Miao
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP APIEric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-02-02ASoC: fix PXA SSP port resumeDaniel Mack
Unconditionally save the register states when suspending and restore them again at resume time. Register contents were not preserved over suspend, and hence the driver takes false assumptions about them. The clock must be enabled to access the register block. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-15ASoC: support more sample rates on raumfeld devicesDaniel Mack
Add support for sample rates other than 44100Khz on raumfeld audio devices. At startup time, call snd_soc_dai_set_sysclk() with 0 as 'freq' argument so it offers all the sample rates. Later, the function is called again to give proper constraints. Use the external audio clock generator to provide double data rate clocks as the PXA's internal baud generator does anything but what's described in the datasheets. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-30ASoC: pxa/raumfeld: adopt new snd_soc_dai_set_pll() APIDaniel Mack
ALSA's for-2.6.33 branch has a new source argument to snd_soc_dai_set_pll(). Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-27ALSA: ARM: add Raumfeld audio supportDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15ASoC: finally enable support for eXeda and CM-X300Igor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Mark Brown <broonie@opensource.wolfsonmicro.com> CC: alsa-devel@alsa-project.org Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-06Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-10-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (21 commits) ALSA: usb - Use strlcat() correctly ALSA: Fix invalid __exit in sound/mips/*.c ALSA: hda - Fix / improve ALC66x parser ALSA: ctxfi: Swapped SURROUND-SIDE mute sound: Make keywest_driver static ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VP ALSA: hda - Fix digita/analog mic auto-switching with IDT codecs ASoC: fix kconfig order of Blackfin drivers ALSA: hda - Added quirk to enable sound on Toshiba NB200 ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2 ALSA: Don't assume i2c device probing always succeeds ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350P ALSA: echoaudio - Re-enable the line-out control for the Mia card ALSA: hda - Resurrect input-source mixer of ALC268 model=acer ALSA: hda - Analog Devices AD1984A add HP Touchsmart model ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelist ALSA: hda - CD-audio sound for hda-intel conexant benq laptop ASoC: DaVinci: Correct McASP FIFO initialization ASoC: Davinci: Fix race with cpu_dai->dma_data ASoC: DaVinci: Fix divide by zero error during 1st execution ...
2009-10-01Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-10-01ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2Takashi Iwai
wm8940 requires I2C. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-25ASoC: pxa-ssp increase max_channels to 8Graeme Gregory
When running in TDM mode there can be more than 2 channels used. Datasheet has figures for upto 8 channels so increase max_channels on all SSP interfaces to this figure. Signed-off-by: Graeme Gregory <dp@xora.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-21trivial: remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-05ASoC: Add source argument to PLL configurationMark Brown
More and more devices feature PLLs and FLLs with the ability to select between multiple input clocks. In order to better support these devices a new argument, source, has been added to the set_pll() configuration API. Using set_clkdiv() is often difficult due to the need to stop the PLL/FLL before any reconfiguration can be done. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-23ASoC: Pass correct platform data from pxa2xx-ac97Marek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ALSA: Allow passing platform_data for pxa2xx-ac97Marek Vasut
This patch adds support for passing platform data to ac97 bus devices from PXA2xx-AC97 driver.. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-06ASoC: change set_tdm_slot api to allow slot_width override.Daniel Ribeiro
Extend set_tdm_slot to allow the user to arbitrarily set the frame width and active TX/RX slots. Updates magician.c and wm9081.c for the new set_tdm_slot(). wm9081.c still doesn't handle the slot_width override. While being there, correct an incorrect use of SlotsPerFrm(7) use in bitmask on pxa-ssp.c (SSCR0_SlotsPerFrm(x) is (((x) - 1) << 24)) ). (this series is meant for Mark's for-2.6.32 branch) Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-24ASoC: Switch palm27x-asoc to jack detection apiMarek Vasut
This patch removes the old method of jack detection from palm27x-asoc driver and adds jack detection api. It also removes some other (now) useless stuff from the driver and corrects pin configuration for the codec. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-01Merge branch 'for-2.6.31' into for-2.6.32Mark Brown
2009-07-01ASoC: Only disable pxa2xx-i2s clocks if we enabled themMark Brown
The clock API can't cope with unbalanced enables and disables and we only enable in hw_params() but try to disable in shutdown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-25Merge branch 'for-2.6.32' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2009-06-25Merge branch 'for-2.6.31' into for-2.6.32Mark Brown
2009-06-18Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-06-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: ctxfi - Fix deadlock with xfi-timer ALSA: intel8x0 - Fix PCM position craziness ALSA: usb-audio - rework quirk for TerraTec Aureon USB 5.1 MkII ASoC: magician: fix PXA SSP clock polarity ASoC: Instantiate any forgotten DAPM widgets ASoC: Revert duplicated code in SSM2602 driver ALSA: hda - Add quirk for Acer Aspire 6935G ALSA: ctxfi - Replace atc lock to mutex ASoC: Remove odd bit clock ratios for WM8903
2009-06-16[ARM] pxa: register wm8731 explicitly for corgi and poodleMark Brown
The wm8731 driver has been converted to register using the standard I2C device registration mechanism so we can now do the registration in the arch/arm code as normal. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-15ASoC: UDA1380: refactor device registrationPhilipp Zabel
This patch mostly follows commit 5998102b9095fdb7c67755812038612afea315c5 "ASoC: Refactor WM8731 device registration" to make UDA1380 use standard device instantiation. Similarly, the I2C device registration temporarily moves into the magician machine driver before it will find its final resting place in the board file. At the same time, platform specific configuration is moved to platform data and common power/reset GPIO handling moves into the codec driver. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
2009-06-14ASoC: magician: fix PXA SSP clock polarityPhilipp Zabel
Follow-up fix needed since "ASoC: pxa-ssp.c fix clock/frame invert". Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-11ASoC: remove duplicated code on pxa-ssp.cDaniel Ribeiro
* We don't need to write the registers twice, remove the first write. * DAIFMT_INV switch is duplicated inside DAIFMT_FORMAT switch, move it out. (This patch is for Mark's for-2.6.32 branch, I have not checked if the code is duplicated on current 2.6.30) Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-05[ARM] pxa/palm: Add Palm27x aSoC driver to PalmTE2Marek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-28ASoC: correct print specifiers for unsignedsRoel Kluin
Unsigned variables should use `%u' rather than `%d'. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-15ASoC: Optimize switch/case in magician.cTakashi Iwai
Use default to optimize the switch/case in magicial_playback_hw_params(), which also fixes the compile warnings below: sound/soc/pxa/magician.c:89: warning: 'acds' may be used uninitialized in this function sound/soc/pxa/magician.c:89: warning: 'acps' may be used uninitialized in this function Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14ASoC: pxa2xx-i2s: Fix suspend/resumeKarl Beldan
pxa2xx_i2s_resume is : - unconditionnaly setting SACR0_ENB - unsetting SACR0_ENB in saved SACR0 pxa_i2s.sacr0 fix these. In pxa2xx_i2s_{resume,suspend}, save/restore registers even when !dai->active. Signed-off-by: Karl Beldan <karl.beldan@mobile-devices.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-14ASoC: pxa2xx-i2s: Fix inappropriate release of i2s clockKarl Beldan
i2s_clk is 'put' for no reason in pxa2xx_i2s_shutdown. Now we 'get' i2s_clk at probe and 'put' it at driver removal or when probe fails. Signed-off-by: Karl Beldan <karl.beldan@mobile-devices.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-14ASoC: pxa2xx-i2s: Handle SACR1_DRPL and SACR1_DREC separatelyKarl Beldan
- hw_params enables both RPL and REC functions each time : Enable the appropriate function in pxa2xx_i2s_trigger. - pxa2xx_i2s_shutdown disables i2s anytime one of RPL or REC function is off : Turn it off only when both functions are off. Signed-off-by: Karl Beldan <karl.beldan@mobile-devices.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-14ASoC: pxa2xx-i2s: Proper hw initializationKarl Beldan
Make sure we are in a know good state at end of probe : Reset FIFO logic and registers, and make sure REC and RPL functions along with FIFO service are disabled (SACR0_RST enables REC and RPL). Resetting loses current settings so remove reset from stream startup. Now reset occurs only at probe. Signed-off-by: Karl Beldan <karl.beldan@mobile-devices.fr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-12ASoC: Enforce symmetric rates for PXA2xx I2SMark Brown
There is a single I2S_SYNC pin on the chip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-12ASoC: em-x270: make the driver support also eXeda and CM-X300 machinesMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-05Merge commit 'takashi/topic/asoc' into for-2.6.31Mark Brown
2009-05-05ASoC: IMote2 ASoC SupportJonathan Cameron
This patch adds the ASoC side of the board support for the Crossbow IMB400 daughter board. Thanks to Crossbow for considerable assistance. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-04Merge branch 'fix/asoc' into topic/asocTakashi Iwai
2009-04-24Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5460/1: Orion: reduce namespace pollution [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config [ARM] 5457/1: mach-imx gpio buildfix [ARM] 5456/1: add sys_preadv and sys_pwritev [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones [ARM] pxa/palm27x: General fix for Palm27x aSoC driver [ARM] pxa/mioa701: use GPIO95 as AC97 reset line [ARM] pxa: merge AC97 platform data structures [ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h
2009-04-23ASoC: change stereo/mono to 32-bit/16-bit for pxa-sspEric Miao
The original idea came from pHilipp, and this makes the code looks more consistent. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-23ASoC: simplify the SSP DMA parameters settings by run-time generationEric Miao
The SSP DMA parameters can actually be easily generated at run-time since they are almost similar except for the FIFO width and direction. Another benefit is the re-use of information from 'struct ssp_device', like SSDR physical FIFO address and DRCMR register index for both directions. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: pHilipp Zabel <philipp.zabel@gmail.com>
2009-04-21Merge branch 'fix/asoc' into for-linusTakashi Iwai
* fix/asoc: ASoC: Fix warning in wm9705 ASoC: OMAP: Update contact addresses ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and SSCR0_SCR
2009-04-20Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-03 06:36:54 +0000