aboutsummaryrefslogtreecommitdiff
path: root/sound/soc/soc-dapm.c
AgeCommit message (Collapse)Author
2009-06-06ASoC: Apostrophe patrolMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-18ASoC: Add debug trace for bias level transitionsMark Brown
A standard way of making sure we know when the bias level changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-18ASoC: Integrate bias management with DAPM power managementMark Brown
Rather than managing the bias level of the system based on if there is an active audio stream manage it based on there being an active DAPM widget. This simplifies the code a little, moving the power handling into one place, and improves audio performance for bypass paths when no playbacks or captures are active. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-18ASoC: Make DAPM sysfs entries non-optionalMark Brown
sysfs is so standard these days there's no point. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-18ASoC: Split DAPM power checks from sequencing of power changesMark Brown
DAPM has always applied any changes to the power state of widgets as soon as it has determined that they are required. Instead of doing this store all the changes that are required on lists of widgets to power up and down, then iterate over those lists and apply the changes. This changes the sequence in which changes are implemented, doing all power downs before power ups and always using the up/down sequences (previously they were only used when changes were due to DAC/ADC power events). The error handling is also changed so that we continue attempting to power widgets if some changes fail. The main benefit of this is to allow future changes to do optimisations over the whole power sequence and to reduce the number of walks of the widget graph required to check the power status of widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-22ASoC: Add power supply widget to DAPMMark Brown
Many modern CODECs have shared resources on chip which must be enabled for portions of the chip to work but which can be disabled at other times in order to achieve power savings. Examples of such resources include power supplies and some internal clocks. Since these widgets are dependencies for the audio path but do not carry audio signals they require slightly different handling to most widgets - they do not contribute to the audio path and so should not be counted as either inputs or outputs during path walks. Cases where one supply provides a supply for another will require additional work. There is also room for more optimisation of the graph walking to avoid repeated checks for the same thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-20ASoC: Make the DAPM power check an operation on the widgetMark Brown
Rather than having switch statements at point of use make the DAPM power check a member of the widget structure and set it when we instantiate the widget. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-20ASoC: Factor out DAPM power checks for DACs and ADCsMark Brown
This also switches us to using a switch statement for the widget type in dapm_power_widget(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-20ASoC: Factor out generic widget power checksMark Brown
This will form a basis for further power check refactoring: the overall goal of these changes is to allow us to check power separately to applying it, allowing improvements in the power sequencing algorithms. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-13ASoC: Support DAPM events for DACs and ADCsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-13ASoC: Factor out application of power for generic widgetsMark Brown
This is simple code motion, intended to support future refactoring of the DAPM algorithms and (more immediately) the additon of events for DACs and ADCs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-07ASoC: Display return code when failing to add a DAPM kcontrolMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Fix memory allocation for snd_soc_dapm_switch namesMark Brown
snd_soc_dapm_switch ends up ends up in dapm_new_mixer() (since a switch is a special case of a mixer with only one input) but this wasn't correctly handled in the code. Also fix the coding style for the switch below while we're here. Reported-by: Joonyoung Shim <dofmind@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Factor out DAPM widget power check into separate functionMark Brown
Essentially simple code motion to facilitate refactoring of the power decisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-28ASoC: Add SND_SOC_DAPM_PIN_SWITCH controls for exposing DAPM pinsMark Brown
On some systems it is desirable for control for DAPM pins to be provided to user space. This is the case with things like GSM modems which are controlled primarily from user space, for example. Provide a helper which exposes the state of a DAPM pin to user space for use in cases like this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-27ASoC: Push the codec runtime storage into the card structureMark Brown
This is a further stage on the road to refactoring away the ASoC platform device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-15Merge branch 'topic/asoc' into next/asocTakashi Iwai
2009-01-15ASoC: Fix the power update function for snd_soc_dapm_value_muxPeter Ujfalusi
Modify the check for the mux type to also handle the snd_soc_dapm_value_mux type in a same way as the snd_soc_dapm_mux. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-09Merge branch 'for-2.6.29' into for-2.6.30Mark Brown
2009-01-09ASoC: Constify pin names for DAPM pin status APIsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-08ASoC: Merge the soc_value_enum to soc_enum structPeter Ujfalusi
Merge the recently introduced soc_value_enum structure to the soc_enum. The value based enums are still handled separately from the normal enum types, but with the merge some of the newly introduced functions can be removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-07ASoC: dapm: Allow explictly named mixer controlsIan Molton
This patch allows you to define the mixer paths as having the same name as the paths they represent. This is required to support codecs such as the wm9705 neatly without extra controls in the alsa mixer. Signed-off-by: Ian Molton <ian@mnementh.co.uk>
2009-01-05ASoC: New enum type: value_enumPeter Ujfalusi
This patch introduces a new enum type. In this enum type each enumerated items referred with a value. This new enum type can handle enums encoded in bitfield, or any other weird ways. twl4030 codec has several mux selection register, where the input/output mux is coded in a bitfield. With the normal enum type this type of mux can not be handled in a clean way. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-01ASoC: Clean up kerneldoc warningsMark Brown
Almost all parameters that have been misnamed in the comments. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-18ASoC: Complain if we fail to create DAPM controlsMark Brown
This should never happen and it's helpful to identify the specific control that failed when it does happen. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-11-21ASoC: Rename snd_soc_card to snd_soc_machineMark Brown
One of the issues with the ASoC v1 API which has been addressed in the ASoC v2 work that Liam Girdwood has done is that the ALSA card provided by ASoC is distributed around the ASoC structures. For example, machine wide data such as the struct snd_card are maintained as part of the CODEC data structure, preventing the use of multiple codecs. This has been addressed by refactoring the data structures so that all the data for the ALSA card is contained in a single structure snd_soc_card which replaces the existing snd_soc_machine and snd_soc_device. Begin the process of backporting this by renaming struct snd_soc_machine to struct snd_soc_card, better reflecting its function and bringing it closer to standard ALSA terminology. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-11-04ALSA: SOC: Fix setting codec register with debugfs filesystem merge errorTroy Kisky
Call device_create_file only once in snd_soc_dapm_sys_add function. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-31ALSA: ASoC - restore removed variable declarationStephen Rothwell
sound/soc/soc-dapm.c: In function 'snd_soc_dapm_sys_add': sound/soc/soc-dapm.c:828: error: 'ret' undeclared (first use in this function) Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-30ASoC: Remove DAPM restriction on mixer control name lengthsMark Brown
As well as ensuring that UI-relevant parts of control names don't get truncated in the DAPM code this avoids conflicts in long control names that differ only at the end of a long string. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-10-30ASoC: Allow setting codec register with debugfs filesystemTroy Kisky
i.e. echo 6 59 >/sys/kernel/debug/soc-audio.0/codec_reg will set register 0x06 to a value of 0x59. Also, pop_time debugfs interface setup is moved so that it is setup in the same function as codec_reg Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-10-27Merge branch 'topic/asoc-next' into topic/asocTakashi Iwai
2008-10-17ALSA: Fix debugfs_create_dir's error checking method for sound/soc/Zhaolei
debugfs_create_dir() returns NULL if an error occurs, returns -ENODEV when debugfs is not enabled in the kernel. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-16ALSA: ASoC: Remove snd_soc_dapm_connect_input()Mark Brown
This was marked as deprecated in 2.6.27 and all users except for playpaq_wm8510 fixed in that release. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-13ALSA: ASoC: update email address for Liam GirdwoodLiam Girdwood
Update the contact information for Liam Girdwood in ASoC core and drivers as my old email address is no longer valid. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-13ALSA: ASoC: Allow machine drivers to mark pins as not connectedMark Brown
Add a new API call snd_soc_dapm_nc_pin() which allows machine drivers to mark pins as being permanently disabled. At present this is identical to snd_soc_dapm_disable_pin() except in terms of improving the internal documentation of machine drivers that use it. The intention is that in future it will be extended to provide additional features such as hiding controls that are only relevant to paths using the disconnected pin. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-10ALSA: ASoC: add new param mux to dapm_mux_update_powerRichard Zhao
Function dapm_mux_update_power needs enum index mux and register mask value val as parameters, but it only has a parameter val, and uses it as both val and mux. snd_soc_test_bits(widget->codec, e->reg, mask, val) val is register mask here, e->texts[val] but val should be enum index mux here. This patch adds a new param mux to fix it. Signed-off-by: Richard Zhao <linuxzsc@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-29ALSA: ASoC: Convert DAPM pop time configuration to debugfsMark Brown
Pop time configuration is a debugging feature which shouldn't be used in normal operation so move it to debugfs where it is clearer. This also simplifies the code since debugfs provides standard facilities for exposing simple integer values to user space. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: convert use of uint to unsigned intJon Smirl
ASOC: convert use of uint to unsigned int Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Rename mask to max to reflect usageJon Smirl
Most of the ASoC controls refer to the maximum value that can be set for a control as mask but there is no actual requirement for all bits to be set at the highest possible value making the name mask misleading. Change the code to use max instead. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Convert bitfields in ASoC into full int widthJon Smirl
Convert bitfields in ASoC into full int width. This is a simple mechanical conversion. Two places in the DAPM code were fixed to properly use mask. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Export dapm_reg_event() fullyMark Brown
dapm_reg_event() is used by devices using SND_SOC_DAPM_REG() so needs to be exported to support building them as modules and prototyped to avoid sparse warnings and potential build issues. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-17ALSA: ASoC: Factor PGA DAPM handling into mainMark Brown
This allows pre and post event hooks to be provided for PGA widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-17ALSA: ASoC: Refactor DAPM event handlerMark Brown
The DAPM event callback code has many layers of indentation, taking it over 80 columns. Refactor the code to give less indentation in order to avoid checkpatch issues on further changes and exploding indentation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-07-10ALSA: ASoC: Dump DAPM state for non-stream changesMark Brown
Explicit DAPM syncs are likely to cause DAPM state updates, as are mixer and mux configuration changes, so display the DAPM status after them too. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: ASoC: Switch DAPM to use of standard DEBUG macroMark Brown
DAPM contains debug output controlled by a DAPM_DEBUG macro. Change this to be controlled by the standard DEBUG, dropping the custom dbg() macro as we go. Also fix the error printed when configuring an unknown pin to be an unconditionally displayed error rather than debug output. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: asoc: core - refactored DAPM pin control API.Liam Girdwood
Refactored snd_soc_dapm_set_endpoint() to snd_soc_dapm_enable_pin() and snd_soc_dapm_disable_pin(). Renamed snd_soc_dapm_sync_endpoints() to snd_soc_dapm_sync(). Renamed snd_soc_dapm_get_endpoint_status() to snd_soc_dapm_get_pin_status(). Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: ASoC: Fix warning from strict_strtoul()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-10ALSA: ASoC: Make pop/click debug wait times dynamically configurableMark Brown
DAPM supports adding a compile time configurable delay to the widget power sequences, aiding diagnosis of problems with pops and clicks being generated during them. This patch converts this to be configurable at run time via a sysfs file. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-06-26ALSA: ASoC: Add support for generic DAPM register modifier widgetJarkko Nikula
This generic register modifier widget is for updating multiple codec register bits at once when the widget changes its power state. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19[ALSA] ASoC: Clarify API for bias configurationMark Brown
Currently the ASoC core configures the bias levels in the system using a callback on codecs and machines called 'dapm_event', passing it PCI style power levels as SNDRV_CTL_POWER_ constants. This is more obscure than it needs to be and has caused confusion to driver authors, especially given that DAPM is also performing power management. Address this by renaming the callback function to 'set_bias_level' and using constants explicitly representing the off, standby, pre-on and on states which DAPM transitions through. Also unexport the API for setting bias level: there are currently no in-tree users of this API other than the core itself and it is likely that the core would need to be extended to cater for any users. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>