aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2010-04-05ALSA: ASoC: move dma_data from snd_soc_dai to snd_soc_pcm_streamDaniel Mack
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. [Note that this is a backported version for 2.6.34. Upstream commit is fd23b7dee] Signed-off-by: Daniel Mack <daniel@caiaq.de> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Reported-by: Michael Hirsch <m.hirsch@raumfeld.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-04-05ASoC: Only do WM8994 bias off transition from standbyMark Brown
Otherwise we may try to power down multiple times when the using idle bias off and the driver is removed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-05ASoC: Don't use DCS_DATAPATH_BUSY for WM hubs devicesMark Brown
The DCS_DATAPATH_BUSY bit used to monitor the completion of DC servo operations has been deprecated and with some more recente revisions may perform incorrectly, especially when only analogue bypass paths are in use. Switch to using readback from the DC servo command register instead, which is supported for all devices. Without this unacceptably long timeouts may be observed in some circumstances. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-05ASoC: Don't do runtime wm_hubs DC servo updates if using offset correctionMark Brown
If we need to offset correct the DC servo then don't use runtime recalibration since that is likely to introduce further offsets which will be evident on powerdown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-05ASoC: Support second DC servo readback method for wm_hubsMark Brown
More recent Wolfson hubs devices add the ability to read back the DC servo calibration information from the register used to write offsets, and later still ones remove the old readback registers. Add support for the new scheme, and use it for WM8994 device revisions that support it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-05ASoC: Avoid wraparound in wm_hubs DC servo correctionMark Brown
If the correction wraps around then a substantial offset would be introduced. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-02ASoC: OMAP: Fix capture pointer handling for OMAP1510 to work correctly with ↵Janusz Krzysztofik
recent ALSA PCM code With recent (2.6.34) chnages in PCM handling, capture stopped working on my OMAP1510 based Amstrad Delta videophone. Using 2.6.34-rc2, I was able to correct the problem in 3 different ways: 1. reverting commit 7b3a177b0d4f92b3431b8dca777313a07533a710, 2. enabling additional jiffies check with echo 4 >/proc/asound/card0/pcm0c0/xrun_debug 3. applying the patch below. Since I wasn't able to reproduce the problem on my i686 PC, I guess the problem is probably machine specific. The patch reuses the method for software emulation of missing hardware pointer, already implemented for playback on OMAP1510. It's possible that event if a hardware pointer is available for capture on this machine, its behaviour may be not compatible with what upper layer expects. If you think the problem may be more general and should be solved differently, on a higher level, I can try to work more on it if you give me a hint. If the patch gets accepted, I suggest it goes as a fix in the current release cycle. Created and tested against linux-2.6.34-rc2. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-29ASoC: Fix passing platform_data to ac97 bus users and fix a leakGraham Gower
[The issue is an attempt to write the pdata without the AC97 device allocated when using ac97.c - also added a comment in soc-core.c for the special case for ac97. -- broonie] Signed-off-by: Graham Gower <graham.gower@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-24ASoC: wm8994: playback => captureDan Carpenter
Sparse caught that initialize "playback" two times instead of initializing "capture". Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-22ASoC: Remove BROKEN from i.MX audio after dependencies mergedMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-22Merge commit 'v2.6.34-rc2' into for-2.6.34Mark Brown
2010-03-19ASoC: pxa-pcm-lib: initialize DMA channel to -1Daniel Mack
This fixes a warning ("pxa_free_dma: trying to free channel 0 which is already freed") when a device was opened but the hw_params() call failed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19ASoC: Bail out of wm_hubs DC servo if calibration failsMark Brown
We're keeping track of the number of times we've iterated but never actually using this to bail out if the chip looks stuck. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-19ASoC: tlv320dac33: Internal clocking changesPeter Ujfalusi
During validation of the internal clocking setup it has been found that the following settings were not configured in an optimal way: ASRC_CTRL_A: SRCLKDIV was incorrect, instad of divide ratio 3, ratio of 2 has to be used (as the comment stated) DAC_CTRL_A: Fs = Fsref is the desired configuration instead of Fs = Fsref / 1.5 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19ASoC: tlv320dac33: Fix DSP modesPeter Ujfalusi
To make DSP_A mode working correctly the data delay should be configured to 0. DSP_B mode thus can not be used with DAC33, so remove it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: sequencer: clean up remove bogus check ALSA: hda: Use LPIB and 6stack-dig for eMachines T5212 ALSA: hda - Disable MSI for Nvidia controller ALSA: hda - Add PCI quirks for MSI NetOn AP1900 and Wind Top AE2220 ALSA: hda - Fix secondary ADC of ALC260 basic model ALSA: hda - Add an error message for invalid mapping NID ALSA: hda - New Intel HDA controller
2010-03-18ASoC: SIU driver shall select FW_LOADERGuennadi Liakhovetski
The SIU ASoC driver must load firmware to program the DSP, therefore it has to select FW_LOADER in its Kconfig entry. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-17Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-03-17Merge branch 'fix/misc' into for-linusTakashi Iwai
2010-03-16sound: sequencer: clean up remove bogus checkDan Carpenter
A few lines earlier bend is limited to 2399. So semitones is always less than 24 here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-16Merge branch 'topic/misc' into fix/miscTakashi Iwai
2010-03-16ALSA: hda: Use LPIB and 6stack-dig for eMachines T5212Daniel T Chen
BugLink: https://bugs.launchpad.net/bugs/538895 The OR has verified that both position_fix=1 and model=6stack-dig are necessary to have capture function properly. (The existing 3stack-6ch model quirk seems to be incorrect.) Reported-by: Reuben Bailey <reuben.e.bailey@gmail.com> Tested-by: Reuben Bailey <reuben.e.bailey@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-15ALSA: hda - Disable MSI for Nvidia controllerTakashi Iwai
Judging from the member of enable_msi white-list, Nvidia controller seems to cause troubles with MSI enabled, e.g. boot hang up or other serious issue may come up. It's safer to disable MSI as default for Nvidia controllers again for now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2010-03-15ALSA: hda - Add PCI quirks for MSI NetOn AP1900 and Wind Top AE2220Anisse Astier
This should make the speakers and jack detection work on MSI all-in-one computers NetOn AP1900 and Wind Top AE2220. Signed-off-by: Anisse Astier <anisse@astier.eu> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-15ALSA: hda - Fix secondary ADC of ALC260 basic modelTakashi Iwai
Fix adc_nids[] for ALC260 basic model to match with num_adc_nids. Otherwise you get an invalid NID in the secondary "Input Source" mixer element. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2010-03-15ALSA: hda - Add an error message for invalid mapping NIDTakashi Iwai
Add an error message to snd_hda_add_nid() for invalid mapping NID to make easier to hunt the buggy code. Also added a missing space to the error message in snd_hda_build_controls() Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-15ALSA: hda - New Intel HDA controllerVitaliy Kulikov
Added a PCI controller id on new Dell laptops. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Sound MSI fallout on a Asus mobo NVIDIA MCP55 sound: fix opti92x-ad1848 build ALSA: hda - Fix input source elements of secondary ADCs on Realtek ALSA: hda - Fix wrong model range check for ALC268
2010-03-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
2010-03-10Merge branch 'topic/misc' into for-linusTakashi Iwai
2010-03-10Merge branch 'topic/hda' into for-linusTakashi Iwai
2010-03-09ALSA: hda - Sound MSI fallout on a Asus mobo NVIDIA MCP55Ralf Gerbig
without the following patch audio ssttuutteerrs on ASUS M2N32-SLI PREMIUM ACPI BIOS Revision 1304 the sound device is: 00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2) worked with 2.6.32 Signed-off-by: Ralf Gerbig <rge@quengel.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-08Merge branch 'origin' into devel-stableRussell King
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-03-08sound: fix opti92x-ad1848 buildRandy Dunlap
Fix 'else' placement in ifdef block so that build succeeds: sound/isa/opti9xx/opti92x-ad1848.c:221: error: 'else' without a previous 'if' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-08Merge branch 'for-rmk/samsung6' of git://git.fluff.org/bjdooks/linux into ↵Russell King
devel-stable
2010-03-08Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
2010-03-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (26 commits) ALSA: hdmi - show debug message on changing audio infoframe ALSA: hdmi - merge common code for intelhdmi and nvhdmi ALSA: hda - Add ASRock mobo to MSI blacklist ALSA: hda: uninitialized variable fix ALSA: hda: Use LPIB for a Biostar Microtech board ALSA: usb/audio.h: Fix field order ALSA: fix jazz16 compile (udelay) ALSA: hda: Use LPIB for Dell Latitude 131L ALSA: hda - Build hda_eld into snd-hda-codec module ALSA: hda - Support NVIDIA MCP89 and GT21x hdmi audio ALSA: hda - Support max codecs to 8 for nvidia hda controller ALSA: riptide: clean up while loop ALSA: usbaudio - remove debug "SAMPLE BYTES" printk line ALSA: timer - pass real event in snd_timer_notify1() to instance callback ALSA: oxygen: change || to && ALSA: opti92x: use PnP data to select Master Control port ASoC: fix ak4104 register array access ASoC: soc_pcm_open: Add missing bailout tag ALSA: usbaudio: Fix wrong bitrate for Creative Creative VF0470 Live Cam ALSA: ua101: removing debugging code ...
2010-03-08ALSA: hda - Fix input source elements of secondary ADCs on RealtekTakashi Iwai
Since alc_auto_create_input_ctls() doesn't set the elements for the secondary ADCs, "Input Source" elemtns for these also get empty, resulting in buggy outputs of alsactl like: control.14 { comment.access 'read write' comment.type ENUMERATED comment.count 1 iface MIXER name 'Input Source' index 1 value 0 } This patch fixes alc_mux_enum_*() (and others) to fall back to the first entry if the secondary input mux is empty. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2010-03-08ALSA: hda - Fix wrong model range check for ALC268Takashi Iwai
Fix a wrong value passed to snd_hda_check_board_codec_sid_config() as the upper-limit in parse_alc268(), so that any wrong value can't be passed. So far, no bogus value was set in the quirk entries, so this won't give any behavioral changes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-08Merge branch 'topic/misc' into for-linusTakashi Iwai
2010-03-08Merge branch 'topic/asoc' into for-linusTakashi Iwai
2010-03-08Merge branch 'topic/hda' into for-linusTakashi Iwai
2010-03-08ALSA: hdmi - show debug message on changing audio infoframeWu Fengguang
Also change printk level for the two others. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-08ALSA: hdmi - merge common code for intelhdmi and nvhdmiWu Fengguang
Create patch_hdmi.c to hold common code from intelhdmi and nvhdmi. For now the patch_hdmi.c file is simply included by patch_intelhdmi.c and patch_nvhdmi.c, and does not represent a real codec. There are no behavior changes to intelhdmi. However nvhdmi made several changes when copying code out of intelhdmi, which are all reverted in this patch. Wei Ni confirmed that the reverted code actually works fine. Tested-by: Wei Ni <wni@nvidia.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-07Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (66 commits) mfd: Fix ucb1x00 build failure for collie_defconfig mfd: Fix lpc_sch related depends/selects, fix build error gpio: Fix sch_gpio warning gpio: add Intel SCH GPIO controller driver i2c: convert i2c-isch to platform_device mfd: Use completion interrupt for WM831x AUXADC mfd: Use completion interrupt for WM835x AUXADC mfd: Introduce remove_script function for twl4030 mfd/mmc: SDHI Kconfig update mfd: sh_mobile_sdhi MMC_CAP_MMC_HIGHSPEED support gpiolib: Force wm831x GPIOs into GPIO mode when requested mfd: Add WM831x revision B support gpiolib: Correct debugfs display of WM831x GPIO inversion gpiolib: Actually set output state in wm831x_gpio_direction_output() tmio_mmc: Balance cell enable()/disable() calls tmio_mmc: Remove const from platform data V3 tmio_mmc: Use 100ms mmc_detect_change() delay tmio_mmc: Add MMC_CAP_MMC_HIGHSPEED support V2 tmio_mmc: Keep card-detect interrupts enabled mfd: Add twl6030 base addr for ID0, ID1, ID2 ...
2010-03-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits) sh: Convert sh to use read/update_persistent_clock sh: Move PMB debugfs entry initialization to later stage sh: Fix up flush_cache_vmap() on SMP. sh: fix up MMU reset with variable PMB mapping sizes. sh: establish PMB mappings for NUMA nodes. sh: check for existing mappings for bolted PMB entries. sh: fixed virt/phys mapping helpers for PMB. sh: make pmb iomapping configurable. sh: reworked dynamic PMB mapping. sh: Fix up cpumask_of_pcibus() for the NUMA build. serial: sh-sci: Tidy up build warnings. sh: Fix up ctrl_read/write stragglers in migor setup. serial: sh-sci: Add DMA support. dmaengine: shdma: extend .device_terminate_all() to record partial transfer sh: merge sh7722 and sh7724 DMA register definitions sh: activate runtime PM for dmaengine on sh7722 and sh7724 dmaengine: shdma: add runtime PM support. dmaengine: shdma: separate DMA headers. dmaengine: shdma: convert to platform device resources dmaengine: shdma: fix DMA error handling. ...
2010-03-07mfd: Update WM8350 drivers for changed interrupt numbersMark Brown
The headphone detect and charger are using the IRQ numbers so need to take account of irq_base with the genirq conversion. I obviously picked the wrong system for initial testing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07mfd: Add a data argument to the WM8350 IRQ free functionMark Brown
To better match genirq. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07ALSA: hda - Add ASRock mobo to MSI blacklistMichele Ballabio
This avoids a lockup at boot. Signed-off-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-30 00:44:04 +0000