aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2006-04-11[PATCH] Last DMA_xBIT_MASK cleanupsTobias Klauser
These are the last conversions of pci_set_dma_mask(), pci_set_consistent_dma_mask() and pci_dma_supported() to use DMA_xBIT_MASK constants from linux/dma-mapping.h Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-02Merge master.kernel.org:/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (28 commits) [ALSA] Kconfig SND_SEQUENCER_OSS help text fix [ALSA] Add Aux input switch control for Aureon Universe [ALSA] pcxhr - Fix the crash with REV01 board [ALSA] sound/pci/hda: use create_singlethread_workqueue() [ALSA] hda-intel - Add support of ATI SB600 [ALSA] cs4281 - Fix the check of timeout in probe [ALSA] cs4281 - Fix the check of right channel [ALSA] Test volume resolution of usb audio at initialization [ALSA] maestro3.c: fix BUG, optimization [ALSA] HDA/Realtek: multiple input mux definitions and pin mode additions [ALSA] AdLib FM card driver [ALSA] Fix / clean up PCM-OSS setup hooks [ALSA] Clean up PCM codes (take 2) [ALSA] Tiny clean up of PCM codes [ALSA] ISA drivers bailing on first !enable[i] [ALSA] Remove obsolete kfree_nocheck call [ALSA] Remove obsolete kfree_nocheck call [ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards [ALSA] Add snd-riptide driver for Conexant Riptide chip [ALSA] hda-codec - Fix noisy output wtih AD1986A 3stack model ...
2006-03-31[ALSA] Kconfig SND_SEQUENCER_OSS help text fixFrederik Deweerdt
Fix misleading help text for SND_SEQUENCER_OSS config option. Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Add Aux input switch control for Aureon UniverseMaximilian Rehkopf
This patch adds a mixer control which allows the user to switch the Aux playback between the internal Aux jack, Wavetable, and Rear Line-In on Aureon Universe cards. For switching, a PCA9554 (8-line GPIO with I2C interface) and a 74HC4052 (dual 4-way mux/demux) are used. Output 0 and 1 of the PCA9554 are connected to the select pins of the 74HC4052. The I2C interface of the PCA9554 is connected to the card's internal SPI bus which is also used to control the WM8770 and CS8415. SPI and I2C on the same lines... To communicate with the PCA9554 the WM8770 and CS8415 are disabled and an I2C Stop Condition is generated before the Start Condition (needed for synchronisation because other SPI traffic appear to confuse the PCA9554). Then a normal I2C data transfer takes place. Programming must be done ridiculously slow; in theory, 4.7us is the minimum delay time for normal-speed I2C according to the datasheet, but even with 10us switching was unreliable. The Windows driver from Terratec does the programming very slowly, too (checked with an oscilloscope). PCA9554 datasheet: http://www.semiconductors.philips.com/acrobat/datasheets/PCA9554_9554A_6.pdf 74HC4052 datasheet: http://www.semiconductors.philips.com/acrobat/datasheets/74HC_HCT4052_4.pdf Signed-off-by: Maximilian Rehkopf <otakon@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] pcxhr - Fix the crash with REV01 boardMarkus Bollinger
On a new board revision for pcxhr boards, the PCXHR_CHIPSC_GPI_USERI bit is no more supported. The cards concerned have a REV01 in their PCI ID. As the current driver tests this bit and does not load the first Xilinx binary when it's 1, the card will crash on Xilinx access over PCI. (the PCI will freeze ....) The fix (fix to version 1.0.11rc4) works for both REV00 and REV01 cards. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] sound/pci/hda: use create_singlethread_workqueue()OGAWA Hirofumi
process_unsol_events() seems to assume a singlethread one (IOW, racey). So, this patch uses create_singlethread_workqueue() instead of create_workqueue(). Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] hda-intel - Add support of ATI SB600Felix Kuehling
This patch adds support for high definition audio on ATI SB600. Signed-off-by: Felix Kuehling <fkuehlin@ati.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] cs4281 - Fix the check of timeout in probeTakashi Iwai
Fix the check of timeout in probe routines to work properly reagrdless of HZ (ALSA bug#1976). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] cs4281 - Fix the check of right channelTakashi Iwai
Fix the check of right channel in mixer volume put callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Test volume resolution of usb audio at initializationTakashi Iwai
Test the volume of usb audio whether actually it works and adjusts the resolution value according to it. Some USB audio devices report a lower resolution than it reacts. The only possible check is to write and read a volume value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] maestro3.c: fix BUG, optimizationAndreas Mohr
- fix brown-paper-bag locking bug (lock() / return / unlock()) - improve central function snd_m3_update_ptr() (avoid expensive integer divisions) - add cpu_relax() to busy-wait I/O loop as recommended (does this require special macro support in ALSA for older kernels??) - constify several structs - spelling updates Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] HDA/Realtek: multiple input mux definitions and pin mode additionsJonathan Woithe
The following patch relative to CVS from 20060324 adds the following features to the Realtek HDA codec. 1) Define two new pin modes: ALC_PIN_DIR_IN_NOMICBIAS and ALC_PIN_DIR_INOUT_NOMICBIAS. These can be used with jack mode switch definitions in mixers to prevent the user being offered the mic bias options if the hardware doesn't support it. 2) Add the ability to have different input mux definitions for different ADCs. This is needed because the ALC260 chip uses different mux layouts for the two onboard ADCs. A new field (num_mux_defs) was added to the alc_spec and alc_config_preset structures to support this. 3) Adjust numerous comments to make them consistent with the above changes. 4) Utilise the new multi-mux definition functionality for the ALC260 fujitsu model to allow recording of the mixer output. 5) Utilise the new multi-mux definition functionality for the ALC260 test model to make the mux selections a little less confusing. 6) Allow the headphone jack of the ALC260 acer model to be retasked in the mixer. 6) Utilise the new multi-mux definition functionality for the ALC260 acer model to give access to the mixer output and the retasked headphone jack. At this stage the *_NOMICBIAS modes are not used. We have reports that the "Line" jack of at least some Acer models doesn't pass the bias out, and we also know that NIDs 0x0f and 0x10 don't seem to accept the mic bias requests at all. However, I feel we need to collect more evidence on both counts before committing to the use of *_NOMICBIAS. In the case of the Acers, it's not clear whether this issue (probably caused by the inclusion of DC blocking capacitors) affects all Acer models or just a small number. With the issue with NIDs 0x0f and 0x10 it's unclear whether this is a hardware bug which will be addressed in later chip revisions or if it's an intentional restriction. The datasheet makes no mention of the restriction so at this stage I'm inclined to consider it a hardware bug. Comments in the source reflect this reasoning. On a similar theme, the headphone jack of the Fujitsu S7020 also doesn't appear to pass mic bias voltage. I'm still investigating this however. With the ability to retask the headphone jack, owners of ALC260-based Acer laptops should now be able to record 4 channels of audio if they desire. The multiple mux definitions allow this jack to be presented from both ADCs (since this mux input is one of those which differs between the muxes). This patch has been tested on a Fujitsu S7020 laptop and appears to behave itself both for the "test" and "fujitsu" models. Definitions using only a single mux specification also work. Other ALC chips should be fine but I cannot test these myself. The "auto" modes should also continue to function but again I have not verified this. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] AdLib FM card driverRene Herman
Attached you'll find an ALSA driver for AdLib FM cards. An AdLib card is just an OPL2, which was already supported by sound/drivers/opl3, so only very minimal bus-glue is needed. The patch applies cleanly to both 2.6.16 and 2.6.16-mm1. The driver has been tested with an actual ancient 8-bit ISA AdLib card and works fine. It also works fine for an OPL3 {,emulation} as still found on many ISA soundcards but given that AdLib cards don't have their own mixer, upping the volume from 0 might be a problem without the card driver already loaded and driving the OPL3. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Fix / clean up PCM-OSS setup hooksTakashi Iwai
- Fix possible race of referring the setup hook from the running PCM - Fix memory leak in an error path of proc write - Clean up the setup hook parser Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Clean up PCM codes (take 2)Takashi Iwai
- Clean up initialization and destruction of substream instance Now snd_pcm_open_substream() alone does most initialization jobs. Add pcm_release callback for cleaning up at snd_pcm_release_substream() - Tidy up PCM oss code Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Tiny clean up of PCM codesTakashi Iwai
- Make snd_pcm_prepare() static - Clean up snd_pcm_kernel_*_ioctl() functions, reduce exports Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] ISA drivers bailing on first !enable[i]Rene Herman
Fix the wrong check of enable option in cmi8330 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Remove obsolete kfree_nocheck callTakashi Iwai
Fixed the compilation, removing obsolete kfree_nocheck() call for memory debugging. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Remove obsolete kfree_nocheck callTakashi Iwai
Fixed the compilation, removing obsolete kfree_nocheck() call for memory debugging. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcardsAsh Willis
Added snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards by Ash Willis. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Add snd-riptide driver for Conexant Riptide chipPeter Gruber
Add snd-riptide driver for Conexant Riptide chip by Peter Gruber. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] hda-codec - Fix noisy output wtih AD1986A 3stack modelTakashi Iwai
Fixed the noisy output wtih AD1986A 3stack model using 2 channels. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] hda-codec - Fix unsol event initialization at resume of stac92xxTakashi Iwai
Fix the re-initialization of unsolicited events at resume of stac92xx codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Make CONFIG_SND_CS46XX_NEW_DSP yes as defaultTakashi Iwai
Removed from CONFIG_EXPERIMENTAL from CONFIG_SND_CS46XX_NEW_DSP, and make default to yes. This option works fine for years. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Add snd-miro driverMartin Langer
Added snd-miro driver for miroSOUND PCM by Martin Langer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Cleanup unused argument for snd_power_wait()Takashi Iwai
Removed the unused file argument of snd_power_wait(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] ice1712 - Fix wrong register value for DMX 6FIREAlan Horstmann
I have just discovered I made an error in the register value set in 'Limit dmx6fire to 6 dacs' patch (bug1472). The value set should be '2a' not '0a' as in the original patch, which unintentionally disables the 2nd MPU 401 UART. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] via82xx - Add dxs entry for EPoX EP-8KRAITakashi Iwai
Added the dxs_support entry for EPoX EP-8KRAI (ALSA bug#1423). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] hda-codec - Fix VREF level of Mic inputs on STAC92xx codecsTakashi Iwai
Fixed VREF level of Mic inputs on STAC92xx codecs (ALSA bug#1953). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Add support of LG LW20 laptopTakashi Iwai
Add support of LG LW20 laptop with ALC880 codec (ALSA bug#1572). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[PATCH] pcmcia: convert DEV_OK to pcmcia_dev_presentDominik Brodowski
Instead of the DEV_OK macro, drivers should use pcmcia_dev_present(). Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: use bitfield instead of p_state and stateDominik Brodowski
Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: add return value to _config() functionsDominik Brodowski
Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: remove dev_link_t and client_handle_t indirectionDominik Brodowski
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: embed dev_link_t into struct pcmcia_deviceDominik Brodowski
Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: remove unneeded Vcc pseudo settingDominik Brodowski
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and Vpp2 can only be set to the same value, a lot of code can be streamlined. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: default suspend and resume handlingDominik Brodowski
In all but one case, the suspend and resume functions of PCMCIA drivers contain mostly of calls to pcmcia_release_configuration() and pcmcia_request_configuration(). Therefore, move this code out of the drivers and into the core. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irqDominik Brodowski
Convert the remaining drivers which use pcmcia_release_io or pcmcia_release_irq, and remove the EXPORT of these symbols. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31[PATCH] pcmcia: add pcmcia_disable_deviceDominik Brodowski
pcmcia_disable_device(struct pcmcia_device *p_dev) performs the necessary cleanups upon device or driver removal: it calls the appropriate pcmcia_release_* functions, and can replace (most) of the current drivers' _release() functions. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-29Merge ../linux-2.6Paul Mackerras
2006-03-28[PATCH] sound: Remove unneeded kmalloc() return value castsJesper Juhl
Get rid of unnessesary casts of kmalloc() return value in sound/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] Typo fixesAlexey Dobriyan
Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] vfree does its own NULL check, no need to be explicit in oss/msnd.cJesper Juhl
vfree() does it's own NULL checking, no need for explicit check before calling it. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] no need to check vfree arg for null in oss/sequencerJesper Juhl
There's no need to check pointers for NULL before handing them to vfree(). Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] maestro3 vfree NULL check fixupJesper Juhl
vfree() checks for NULL, no need to do it explicitly. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Zach Brown <zab@zabbo.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] vfree NULL check fixup for sb_cardJesper Juhl
There's no need to check the vfree() argument for NULL. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] Replace 0xff.. with correct DMA_xBIT_MASKMatthias Gehre
Replace all occurences of 0xff.. in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h. Signed-off-by: Matthias Gehre <M.Gehre@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] mark f_ops const in the inodeArjan van de Ven
Mark the f_ops members of inodes as const, as well as fix the ripple-through this causes by places that copy this f_ops and then "do stuff" with it. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] powerpc: Kill _machine and hard-coded platform numbersBenjamin Herrenschmidt
This removes statically assigned platform numbers and reworks the powerpc platform probe code to use a better mechanism. With this, board support files can simply declare a new machine type with a macro, and implement a probe() function that uses the flattened device-tree to detect if they apply for a given machine. We now have a machine_is() macro that replaces the comparisons of _machine with the various PLATFORM_* constants. This commit also changes various drivers to use the new macro instead of looking at _machine. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27[PATCH] PNP: adjust pnp_register_card_driver() signature: wavefrontBjorn Helgaas
Remove the assumption that pnp_register_card_driver() returns the number of devices claimed. And fix some __init/__devinit issues. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Jaroslav Kysela <perex@suse.cz> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>