aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2008-10-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: sound/core/memalloc.c
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-10-10ALSA: hda: VREF powerdown for headphonesMatthew Ranostay
Add support for powering down VREF on standard headphone insertion, also powers up the VREF on a headset insertion. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda: STAC_HP_M4Matthew Ranostay
Set the third microphone to a default config of a 'Line In' to be added the Input Source Mux's. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: ASoC: Check for machine type in GTA01 machine driverMark Brown
Since there are now multiple OpenMoko platforms it is more important to check that the machine driver is running on the correct system. This was orgininally generated as part of the initial GTA02 machine port. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: mtpav - Fix race in probeTakashi Iwai
Ingo reported Oops at probing mtpav driver. It's a race between the irq handler and the rawmidi instance registration. This patch fixes the order of registration to avoid the race. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirkPedro Lopez-Cabanillas
The MIDI interfaces have to be detected dynamically for Edirol devices ua-700, ua-25 and ua4-fx. This patch reverses the wrong changes made by my other patch in uaxx-quirk. Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: Add a note on dependency of RTC stuffTakashi Iwai
Added a note on the dependency of old RTC stuff, which is exclusive with the new RTC class drivers. http://bugme.linux-foundation.org/show_bug.cgi?id=11430 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: ASoC: add new param mux to dapm_mux_update_powerRichard Zhao
Function dapm_mux_update_power needs enum index mux and register mask value val as parameters, but it only has a parameter val, and uses it as both val and mux. snd_soc_test_bits(widget->codec, e->reg, mask, val) val is register mask here, e->texts[val] but val should be enum index mux here. This patch adds a new param mux to fix it. Signed-off-by: Richard Zhao <linuxzsc@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driverMark Brown
Mic PGA Switch should be inverted in the WM8510 driver but isn't. Reported-by: ext-jukka.hynninen@vaisala.com Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda: comment typo fixWu Fengguang
fix a typo in comment for is_in_nid_list(). Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda: comment typo fixWu Fengguang
fix a typo in comment for process_unsol_events(). Signed-off-by: Wu Fengguang<wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLITakashi Iwai
The PCI SSID for ASROCK mobo in commit ac56445dd6a38a36c2fa91989f5f6220a9bdf97c is wrong. This patch fixes to the correct one, 1849:3662. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: snd-usb-audio: support for Edirol UA-4FX devicePedro Lopez-Cabanillas
Renamed the old quirk function for ua-700/ua-25 to become more generic, moving the MIDI interfaces to the quirk data header. Added a new quirk for the Edirol UA-4FX. Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: usb - Fix possible Oops at USB-MIDI disconnectionTakashi Iwai
The endpoints should be released immediately at disconnection rather than the delayed release. This could be a reason of Oops at USB-audio device disconnection being used. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda - Fix another ALC889A (rev 0x100101)Clive Messer
ALC889A hardware (id 0x10ec0885 rev 0x100101) to use patch_alc883 Signed-off-by: Clive Messer <clive@vacuumtube.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda: add more board-specific information for Realtek ALC662 rev1Vedran Miletic
I recently got a chance to play with two boards with ALC662 rev1: * BIOSTAR TA780G M2+ * ASROCK K10N78FullHD-hSLI R3.0 Both use 3 stack, 6ch mode with digital out. Since autodetection isn't able to figure that out from BIOS, we need to specify that manually. Signed-off-by: Vedran Miletic <rivanvx@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: Correct Vladimir Barinov's e-mail addressVladimir Barinov
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cardsVedran Miletic
This patch adds PCI IDs for: * TerraTec DMX XFire 1024 * Hercules Gamesurround Fortissimo II * Hercules Gamesurround Fortissimo III 7.1 All those cards were supported as generic CS46xx device, so they will work as before. I'm pretty sure that first two cards work, as they have same hardware design as reference card. Not sure about Fortissimo III, but this won't break it if it worked. Tested on TerraTec DMX XFire 1024. Signed-off-by: Vedran Miletic <rivanvx@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda: SPDIF stream muting supportMatthew Ranostay
Added support for muting S/DPIF outs using the 'Digital Playback Source' muxs on supporting codecs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda: appletv supportPeter Korsgaard
The AppleTV needs the same handling as the 24" iMac. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda - Map ALC662 model for Foxconn 45CMX/45GMX/45CMX-KHerton Ronaldo Krzesinski
Use 3stack-6ch-dig ALC662 model for Foxconn 45CMX/45GMX/45CMX-K motherboard. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda - Map ALC662 model for Gigabyte 945GCM-S2LHerton Ronaldo Krzesinski
Use 3stack-6ch-dig ALC662 model for Gigabyte 945GCM-S2L motherboard. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: sound/soc/at32: Useless NULL testJulien Brunel
The test (ssc != NULL) can only be reached if the call to the function ssc_request, the result of which ssc is assigned, succeeds. Moreover, two statements assign NULL to ssc just before a return, which is useless since it is a local variable. So, we suggest to delete the test and the two assignments. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @bad_null_test@ expression x,E; @@ x = ssc_request(...) ... when != x = E * x != NULL // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda: HP laptop quirkMatthew Ranostay
Added HP laptop SND_PCI_QUIRK for STAC_HP_M4. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda: 92xx S/PDIF In supportMatthew Ranostay
Add support for S/PDIF IN on reference boards quirks. Also disable the IEC958 capture switch on boards with GPIO0 enabled. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: usb-audio: add support for E-Mu Tracker PreEran Tromer
Add support for the E-Mu "Tracker Pre" USB sound card, following the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB. As with the 0202 and 0404 USB, functionality is very limited: just a couple of sample rates, no volume/mute control, etc. Signed-off-by: Eran Tromer <eran@tromer.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: Fix for reading RIRB buffer on NVIDIA aza controller with AMD Phenom cpuWei Ni
When read RIRB buffer immediately after RIRB interrupt received, sometimes the data will be "0x0". If we wait for some time, the data in buffer will be correct. This issue only occurred with AMD Phenom cpu. So we set this "needs_damn_long_delay" flag. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: Support NVIDIA MCP78/7A HDMI audioWei Ni
Add NVIDIA HDMI HD-audio codec support in snd-hda-intel driver, include NVIDIA MCP78/7A HDMI. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda - Fix / clean-up slave digital out codesTakashi Iwai
The recent slave_dig_out addition has some rooms to clean up. Also it doesn't call snd_hda_cleanup_stream() properly for slaves at closing. The patch fixes both issues. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda: slave_dig_outs code block in wrong locationMatthew Ranostay
Removed invalid references to slave_dig_outs inside the S/PDIF IN capture switch control. Beforehand this was basically a mute switch for the S/PDIF outs as well. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: intel8x0 - Add quirk for Fujitsu Lifebook P7010Takashi Iwai
Fujitsu Lifebook P7010 requires ac97_quirk=hp_only. http://bugzilla.kernel.org/show_bug.cgi?id=9100 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: hda: use last DAC defined for hp_pinMatthew Ranostay
Patch allows the last DAC in the dac_nids for the hp_nid if there is an available one this isn't in use by a line_out entry or if hp_nid isn't already defined. This solves the issues with the 'Headphone Playback' mixer controls on the 92hd73xxx branch and possibly others. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-07[ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.cEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] pxa: simplify DMA register definitionsEric Miao
1. DRCMRxx is no longer recommended, use DRCMR(xx) instead, and pass DRCMR index by "struct resource" if possible 2. DCSRxx, DDADRxx, DSADRxx, DTADRxx, DCMDxx is never used, use DCSR(), DDADR(), DSADR(), DTADR(), DCMD() instead Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07Merge branches 'pxa-core' and 'pxa-machines' into pxa-allRussell King
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c
2008-09-25[ARM] pxa: avoid needless pxa_gpio_mode() during resumeRussell King
The pin configurations are restored early on during resume. There's no need for drivers to re-affirm the gpio modes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-24ALSA: oxygen: wait for ACK when resetting UARTClemens Ladisch
After sending a reset command to the UART, wait some time for the ACK to be generated (and to be read and dropped by the interrupt handler) before sending the next command. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-23[ARM] pxa/akita: use pca953x instead of akita-ioexpEric Miao
Use generic pca953x which provides gpiolib interface instead of akita-specific akita-ioexp with non-standard interface to pins. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23[ARM] pxa/spitz: use generic GPIO API for SCOOP1/SCOOP2 GPIOsEric Miao
Original patch from Dmitry Baryshkov's inital scoop gpio conversion work at http://git.infradead.org/users/dbaryshkov/zaurus-2.6.git. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23[ARM] pxa/corgi: use generic GPIO API for SCOOP GPIOsEric Miao
Original patch from Dmitry Baryshkov's inital scoop gpio conversion work at http://git.infradead.org/users/dbaryshkov/zaurus-2.6.git. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23ALSA: ASoC: Convert tlv320aic3x to a new-style i2c driver (v2)Jean Delvare
Convert the tlv320aic3x codec driver to the new (standard) device driver binding model. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Vladimir Barinov <vbarinov@ru.mvista.com> Tested-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: hda - Fix ALC662 DAC mixer mutes also for auto config modelHerton Ronaldo Krzesinski
In previous change "[ALSA] hda-codec - Fix ALC662 DAC mixer mutes", I missed to fix the mixer mute switches also for the auto config model of ALC662. Now mute for mixer items "Front", "Surround", "Center" and "LFE" when available will work too with "auto" model. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: hda - Add PCI subsystem ID for MacBookPro4,1David Woodhouse
This seems to work if I tell it that it's a mbp3. Not sure if there are actually any differences. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: hda: SPDIF mux fixes for STAC927xMatthew Ranostay
Corrected bounds-checking in stac92xx_auto_create_mux_input_ctls() and added a spec->spdif_labels pointer for custom SPDIF mux labels for non-standard codec connections. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23sound: ASoC: Add WM8750 SPI supportMark Brown
Implement SPI support for WM8750, cut'n'pasting from the support for WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format is the same for both codecs. Also fix a cut'n'pasted comment in the I2C side of the driver (which was clearly written in the same way) while we're at it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23sound: ASoC: DAPM support for ADC on WM9713 PCM interfaceMark Brown
The stereo ADC in the WM9713 can be used to produce data for both the standard AC97 interface and the additional voice PCM interface. Support use on both by defining virtual ADCs tied to each accepting the output from the actual ADCs. Reported-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23sound: ASoC: Fix dependency on AC97_BUSMark Brown
When built with AC97 support the ASoC core depends on AC97_BUS so force it to be available Kconfig. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: HDA VIA: Replace buggy Mic BoostHarald Welte
VT1708S' Mic Boost should be hidden in hardware design according to some customers' requirements. However, in case of bugs, it has to be exhibited to normal users, so we need to: * open a software backdoor, which is disabled by default in hardware * re-write .tlv & .info, to indicate the actual necessary info, which we cannot get from amplifier's capabiliies Signed-off-by: Logan Li <LoganLi@viatech.com.cn> Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: HDA VIA: Fix 2nd S/PDIF out functionHarald Welte
As it seems, the recently-sent patch for the 2nd S/PDIF (HDMI) output is not working with alsa-kernel 1.0.18rc3. This patch makes it work by * activating the second S/PDIF output pin in the pin config * consolidating the dig_playback_pcm_prepare() with extra_dig_pcm_prepare() functions * remove the need for an extra hda_pcm_stream structure and rather represents the second digital output as substream within the primary S/PDIF digital out stream. Signed-off-by: Logan Li <LoganLi@viatech.com.cn> Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 22:54:20 +0000