aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2010-02-04perf tools: Fix session init on non-modular kernelsIngo Molnar
perf top and perf record refuses to initialize on non-modular kernels: refuse to initialize: $ perf top -v map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.33-rc6-tip-00586-g398dde3-dirty/ Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf tools: Clean up O_LARGEFILE et al usageXiao Guangrong
Setting _FILE_OFFSET_BITS and using O_LARGEFILE, lseek64, etc, is redundant. Thanks H. Peter Anvin for pointing it out. So, this patch removes O_LARGEFILE, lseek64, etc. Suggested-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4B6A8972.3070605@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf annotate: Fix perf top module symbol annotationMike Galbraith
Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Kirill Smelkov <kirr@landau.phys.spbu.ru> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1265265106.6364.5.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf top: Teach it to autolocate vmlinuxKirill Smelkov
By relying on logic in dso__load_kernel_sym(), we can automatically load vmlinux. The only thing which needs to be adjusted, is how --sym-annotate option is handled - now we can't rely on vmlinux been loaded until full successful pass of dso__load_vmlinux(), but that's not the case if we'll do sym_filter_entry setup in symbol_filter(). So move this step right after event__process_sample() where we know the whole dso__load_kernel_sym() pass is done. By the way, though conceptually similar `perf top` still can't annotate userspace - see next patches with fixes. Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1265223128-11786-9-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf annotate: Fix it for non-prelinked *.soKirill Smelkov
The problem was we were incorrectly calculating objdump addresses for sym->start and sym->end, look: For simple ET_DYN type DSO (*.so) with one function, objdump -dS output is something like this: 000004ac <my_strlen>: int my_strlen(const char *s) 4ac: 55 push %ebp 4ad: 89 e5 mov %esp,%ebp 4af: 83 ec 10 sub $0x10,%esp { i.e. we have relative-to-dso-mapping IPs (=RIP) there. For ET_EXEC type and probably for prelinked libs as well (sorry can't test - I don't use prelink) objdump outputs absolute IPs, e.g. 08048604 <zz_strlen>: extern "C" int zz_strlen(const char *s) 8048604: 55 push %ebp 8048605: 89 e5 mov %esp,%ebp 8048607: 83 ec 10 sub $0x10,%esp { So, if sym->start is always relative to dso mapping(*), we'll have to unmap it for ET_EXEC like cases, and leave as is for ET_DYN cases. (*) and it is - we've explicitely made it relative. Look for adjust_symbols handling in dso__load_sym() Previously we were always unmapping sym->start and for ET_DYN dsos resulting addresses were wrong, and so objdump output was empty. The end result was that perf annotate output for symbols from non-prelinked *.so had always 0.00% percents only, which is wrong. To fix it, let's introduce a helper for converting rip to objdump address, and also let's document what map_ip() and unmap_ip() do -- I had to study sources for several hours to understand it. Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1265223128-11786-8-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf tools: Adjust some verbosity levelsArnaldo Carvalho de Melo
Not to pollute too much 'perf annotate' debugging sessions. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-7-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf record: Stop intercepting events, use postprocessing to get build-idsArnaldo Carvalho de Melo
We want to stream events as fast as possible to perf.data, and also in the future we want to have splice working, when no interception will be possible. Using build_id__mark_dso_hit_ops to create the list of DSOs that back MMAPs we also optimize disk usage in the build-id cache by only caching DSOs that had hits. Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-6-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf build-id: Move the routine to find DSOs with hits to the libArnaldo Carvalho de Melo
Because 'perf record' will have to find the build-ids in after we stop recording, so as to reduce even more the impact in the workload while we do the measurement. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-5-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf probe: Don't use a perf_session instance just to resolve symbolsArnaldo Carvalho de Melo
With the recent modifications done to untie the session and symbol layers, 'perf probe' now can use just the symbols layer. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf symbols: Ditch vdso global variableArnaldo Carvalho de Melo
We can check using strcmp, most DSOs don't start with '[' so the test is cheap enough and we had to test it there anyway since when reading perf.data files we weren't calling the routine that created this global variable and thus weren't setting it as "loaded", which was causing a bogus: Failed to open [vdso], continuing without symbols Message as the first line of 'perf report'. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-3-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf symbols: Fixup vsyscall mapsArnaldo Carvalho de Melo
While debugging a problem reported by Pekka Enberg by printing the IP and all the maps for a thread when we don't find a map for an IP I noticed that dso__load_sym needs to fixup these extra maps it creates to hold symbols in different ELF sections than the main kernel one. Now we're back showing things like: [root@doppio linux-2.6-tip]# perf report | grep vsyscall 0.02% mutt [kernel.kallsyms].vsyscall_fn [.] vread_hpet 0.01% named [kernel.kallsyms].vsyscall_fn [.] vread_hpet 0.01% NetworkManager [kernel.kallsyms].vsyscall_fn [.] vread_hpet 0.01% gconfd-2 [kernel.kallsyms].vsyscall_0 [.] vgettimeofday 0.01% hald-addon-rfki [kernel.kallsyms].vsyscall_fn [.] vread_hpet 0.00% dbus-daemon [kernel.kallsyms].vsyscall_fn [.] vread_hpet [root@doppio linux-2.6-tip]# Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04perf symbols: Remove perf_session usage in symbols layerArnaldo Carvalho de Melo
I noticed while writing the first test in 'perf regtest' that to just test the symbol handling routines one needs to create a perf session, that is a layer centered on a perf.data file, events, etc, so I untied these layers. This reduces the complexity for the users as the number of parameters to most of the symbols and session APIs now was reduced while not adding more state to all the map instances by only having data that is needed to split the kernel (kallsyms and ELF symtab sections) maps and do vmlinux relocation on the main kernel map. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-03perf tools: Use O_LARGEFILE to open perf data fileXiao Guangrong
Open perf data file with O_LARGEFILE flag since its size is easily larger that 2G. For example: # rm -rf perf.data # ./perf kmem record sleep 300 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 3142.147 MB perf.data (~137282513 samples) ] # ll -h perf.data -rw------- 1 root root 3.1G ..... Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4B68F32A.9040203@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31perf lock: Clean up various detailsIngo Molnar
Fix up a few small stylistic details: - use consistent vertical spacing/alignment - remove line80 artifacts - group some global variables better - remove dead code Plus rename 'prof' to 'report' to make it more in line with other tools, and remove the line/file keying as we really want to use IPs like the other tools do. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31perf lock: Introduce new tool "perf lock", for analyzing lock statisticsHitoshi Mitake
Adding new subcommand "perf lock" to perf. I have a lot of remaining ToDos, but for now perf lock can already provide minimal functionality for analyzing lock statistics. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31perf: Add util/include/linuxhash.h to include hash.h of kernelHitoshi Mitake
linux/hash.h, hash header of kernel, is also useful for perf. util/include/linuxhash.h includes linux/hash.h, so we can use hash facilities (e.g. hash_long()) in perf now. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1264851813-8413-3-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31perf tools: Add __data_loc supportHitoshi Mitake
This patch is required to test the next patch for perf lock. At 064739bc4b3d7f424b2f25547e6611bcf0132415 , support for the modifier "__data_loc" of format is added. But, when I wanted to parse format of lock_acquired (or some event else), raw_field_ptr() did not returned correct pointer. So I modified raw_field_ptr() like this patch. Then raw_field_ptr() works well. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> LKML-Reference: <1264851813-8413-2-git-send-email-mitake@dcl.info.waseda.ac.jp> [ v3: fixed minor stylistic detail ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31Revert "perf record: Intercept all events"Hitoshi Mitake
This reverts commit f5a2c3dce03621b55f84496f58adc2d1a87ca16f. This patch is required for making "perf lock rec" work. The commit f5a2c3dce0 changes write_event() of builtin-record.c . And changed write_event() sometimes doesn't stop with perf lock rec. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> [ that commit also causes perf record to not be Ctrl-C-able, and it's concetually wrong to parse the data at record time (unconditionally - even when not needed), as we eventually want to be able to do zero-copy recording, at least for non-archive recordings. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-29perf: Ignore perf-archive temp fileJohn Kacur
Tell git to ignore perf-archive. Signed-off-by: John Kacur <jkacur@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1264633557-17597-6-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-29tools/perf/perf.c: Clean up trivial style issuesThiago Farina
Checked with: ./../scripts/checkpatch.pl --terse --file perf.c perf.c: 51: ERROR: open brace '{' following function declarations go on the next line perf.c: 73: ERROR: "foo*** bar" should be "foo ***bar" perf.c:112: ERROR: space prohibited before that close parenthesis ')' perf.c:127: ERROR: space prohibited before that close parenthesis ')' perf.c:171: ERROR: "foo** bar" should be "foo **bar" perf.c:213: ERROR: "(foo*)" should be "(foo *)" perf.c:216: ERROR: "(foo*)" should be "(foo *)" perf.c:217: ERROR: space required before that '*' (ctx:OxV) perf.c:452: ERROR: do not initialise statics to 0 or NULL perf.c:453: ERROR: do not initialise statics to 0 or NULL Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <1264633557-17597-7-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-29Merge branch 'perf/urgent' into perf/coreIngo Molnar
Merge reason: We want to queue up a dependent patch. Also update to later -rc's. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-29perf session: Create kernel maps in the constructorArnaldo Carvalho de Melo
Removing one extra step needed in the tools that need this, fixing a bug in 'perf probe' where this was not being done. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264633557-17597-4-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-29perf symbols: Split helpers used when creating kernel dso objectArnaldo Carvalho de Melo
To make it clear and allow for direct usage by, for instance, regression test suites. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264633557-17597-3-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-29perf symbols: Factor out dso__load_vmlinux_path()Arnaldo Carvalho de Melo
So that we can call it directly from regression tests, and also to reduce the size of dso__load_kernel_sym(), making it more clear. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264633557-17597-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-29perf top: Exit if specified --vmlinux can't be usedArnaldo Carvalho de Melo
As we do lazy loading of symtabs we only will know if the specified vmlinux file is invalid when we actually have a hit in kernel space and then try to load it. So if we get kernel hits and there are _no_ symbols in the DSO backing the kernel map, bail out. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264633557-17597-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf trace: Add -i option for choosing input fileHitoshi Mitake
perf trace lacks -i option for choosing input file. This patch adds it to perf trace. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1264167929-6741-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf symbols: Use the right variable to check for kallsyms in the cacheArnaldo Carvalho de Melo
Probably this wasn't noticed when testing this on my parisc machine because I must have copied manually to its cache the vmlinux file used in the x86_64 machine, now that I tried looking on a x86-32 machine with a fresh cache, kernel symbols weren't being resolved even with the right kallsyms copy on its cache, duh. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264178102-4203-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf symbols: Fix inverted logic for showing kallsyms as the source of symbolsArnaldo Carvalho de Melo
Only if we parsed /proc/kallsyms (or a copy found in the buildid cache) we should set the dso long name to "[kernel.kallsyms]". Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264178102-4203-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf top: Handle PERF_RECORD_{FORK,EXIT} eventsArnaldo Carvalho de Melo
As noticed by Mike, symbols in new tasks were not being processed as we weren't processing these events. Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264086284-1431-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf top: Fix sample countingArnaldo Carvalho de Melo
Broken since "5b2bb75 perf top: Support userspace symbols too". Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264086284-1431-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf: Ignore perf.data.oldAmerigo Wang
Tell git to ignore this file. Signed-off-by: WANG Cong <amwang@redhat.com> LKML-Reference: <20100125051052.3999.28082.sendpatchset@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-27perf report: Fix segmentation fault when running with '-g none'Yong Wang
Segmentation fault occurs when running perf report with '-g none'. Reported-by: Austin Zhang <austin.zhang@intel.com> Signed-off-by: Yong Wang <yong.y.wang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100122014750.GA4111@ywang-moblin2.bj.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-21perf buildid-cache: Add new command to manage build-id cacheArnaldo Carvalho de Melo
For now it just has operations to examine a given file, find its build-id and add or remove it to/from the cache. Useful, for instance, when adding binaries sent together with a perf.data file, so that we can add them to the cache and have the tools find it when resolving symbols. It'll also manage the size of the cache like 'ccache' does. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1264008525-29025-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-20perf symbols: Use only --vmlinux if specifiedArnaldo Carvalho de Melo
Found while analysing a perf.data file collected on an ARM machine where an explicitely specified vmlinux was being disregarded. Reported-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263904574-30732-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-20perf symbols: Set dso->kernel when handling the fake vmlinux MMAP eventArnaldo Carvalho de Melo
Because it may be possible that there was no buildid section, where we would set this to 1. Found while analysing a perf.data file collected on an ARM machine where an explicitely specified vmlinux was being disregarded. Reported-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263904574-30732-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-20perf archive: Fix installation steps in the MakefileArnaldo Carvalho de Melo
Fix these warning: acme@parisc:~/git/linux-2.6-tip$ make -C tools/perf/ install make: Entering directory `/home/acme/git/linux-2.6-tip/tools/perf' Makefile:833: warning: overriding commands for target `perf-archive' Makefile:822: warning: ignoring old commands for target `perf-archive' Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263846102-24841-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-20perf archive: Add documentationArnaldo Carvalho de Melo
This also makes it appear on the 'perf --help' output, i.e. util/generate-cmdlist.sh now takes it into account. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263837559-24168-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-20perf kmem: Print usage help for unknown commandsPekka Enberg
This patch fixes "perf kmem" to print usage help instead of doing nothing. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> LKML-Reference: <1263921971-10782-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-20perf kmem: Increase "Hit" column lengthPekka Enberg
It's fairly easy to overflow the "Hit" column with just few seconds of tracing so increase the column length to avoid broken formatting. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> LKML-Reference: <1263921803-10214-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-17perf probe: Fix build error of builtin-probe.cHitoshi Mitake
I got this build error when building tip tree: | cc1: warnings being treated as errors | builtin-probe.c:123: error: 'opt_show_lines' defined but not used This error is caused by: | #ifndef NO_LIBDWARF | OPT_CALLBACK('L', "line", NULL, | "FUNC[:RLN[+NUM|:RLN2]]|SRC:ALN[+NUM|:ALN2]", | "Show source code lines.", opt_show_lines), | #endif My environment defines NO_LIBDWARF, so gcc treated opt_show_lines() as garbage. So I moved opt_show_lines() into #ifndef NO_LIBDWARF ... #endif block. Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1263645076-9993-1-git-send-email-mitake@dcl.info.waseda.ac.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-17perf: Fix implicit declaration of getline in util.cFrederic Weisbecker
getline() is considered as undeclared in util/util.c because it includes string.h, that in turn includes stdio.h, without having defined _GNU_SOURCE. But util.c also includes util.h that handles the _GNU_SOURCE and all the needed inclusions already. Let's include only util.h and sys/mman.h which is the only one header not handled by util.h This fixes the following build error: util/util.c: In function 'slow_copyfile': util/util.c:49: erreur: implicit declaration of function 'getline' util/util.c:49: erreur: nested extern declaration of 'getline' Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263648075-3858-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-17perf timechart: Use tid not pid for COMM changeArjan van de Ven
A process that changes its comm field, does this on a per kernel task struct basis. The timechart tool used, incorrectly, the pid to track this, and should have used the tid instead... Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> CC: <stable@kernel.org> LKML-Reference: <20100116125319.34ac3edd@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-16perf symbols: Accept an alias when looking for "_text"Arnaldo Carvalho de Melo
As it is in PARISC64: parisc:~# uname -a Linux parisc 2.6.33-rc4-tip+ #1 SMP Thu Jan 14 13:33:34 BRST 2010 parisc64 GNU/Linux parisc:~# grep -w _text /proc/kallsyms 0000000040100000 A _text parisc:~# grep 0000000040100000 /proc/kallsyms 0000000040100000 T stext 0000000040100000 T _stext 0000000040100000 A _text parisc:~# Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263586107-1756-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-16perf record: Intercept all eventsArnaldo Carvalho de Melo
The event interception we need to do in 'perf record' to create a list of all DSOs in PERF_RECORD_MMAP events wasn't seeing all events, make sure that happens by checking size agains event_t->header.size. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263586107-1756-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-16perf archive: Add helper script to package files needed to do analysisArnaldo Carvalho de Melo
It uses 'perf buildid-list --with-hits' to create a tarball with what is needed to have in the destination machine ~/.debug hierarchy to properly decode the perf.data file specified. Here is an example where a perf.data file collected on a x86-64 machine running Fedora 12 is used and then the data is packaged, transferred and decoded on a PARISC64 machine running Debian Testing, 32-bit userspace: [root@doppio linux-2.6-tip]# uname -a Linux doppio.ghostprotocols.net 2.6.33-rc4-tip+ #3 SMP Wed Jan 13 11:58:15 BRST 2010 x86_64 x86_64 x86_64 GNU/Linux [root@doppio linux-2.6-tip]# perf archive [root@doppio linux-2.6-tip]# ls -la perf.data* -rw------- 1 root root 737696 2010-01-14 23:36 perf.data -rw-r--r-- 1 root root 8840025 2010-01-15 12:27 perf.data.tar.bz2 [root@doppio linux-2.6-tip]# scp perf.data.* parisc64:. Password: perf.data.tar.bz2 100% 8633KB 1.4MB/s 00:06 [root@doppio linux-2.6-tip]# ssh parisc64 Password: Linux parisc 2.6.19-g2bbf29ac-dirty #1 Sun Dec 3 17:24:04 BRST 2006 parisc64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Thu Jan 14 11:23:24 2010 from d parisc:~# uname -a Linux parisc 2.6.19-g2bbf29ac-dirty #1 Sun Dec 3 17:24:04 BRST 2006 parisc64 GNU/Linux parisc:~# mkdir .debug parisc:~# tar xvf perf.data.tar.bz2 -C ~/.debug tar: Record size = 8 blocks .build-id/74/f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms]/74f9930ee94475b6b3238caf3725a50d59cb994b .build-id/9f/fdcac0a7935922d1f04b6cc9029dfef0f066ef lib/modules/2.6.33-rc4-tip+/kernel/arch/x86/crypto/aes-x86_64.ko/9ffdcac0a7935922d1f04b6cc9029dfef0f066ef .build-id/3a/af89c32ebfc438ff546c93597d41788e3e65f3 lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwl3945.ko/3aaf89c32ebfc438ff546c93597d41788e3e65f3 .build-id/19/f46033f73e1ec612937189bb118c5daba5a0c8 lib/modules/2.6.33-rc4-tip+/kernel/net/mac80211/mac80211.ko/19f46033f73e1ec612937189bb118c5daba5a0c8 .build-id/17/72f014a7a7272859655acb0c64a20ab20b75ee lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko/1772f014a7a7272859655acb0c64a20ab20b75ee .build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 .build-id/5c/68f7afeb33309c78037e374b0deee84dd441f6 lib64/libpthread-2.10.2.so/5c68f7afeb33309c78037e374b0deee84dd441f6 .build-id/e9/c9ad5c138ef882e4507d2605645b597da43873 bin/dbus-daemon/e9c9ad5c138ef882e4507d2605645b597da43873 .build-id/bc/da7d09eb6c9ee380dae0ed3d591d4311decc31 lib64/libdbus-1.so.3.4.0/bcda7d09eb6c9ee380dae0ed3d591d4311decc31 .build-id/7c/c449a77f48b85d6088114000e970ced613bed8 usr/lib64/libcrypto.so.0.9.8k/7cc449a77f48b85d6088114000e970ced613bed8 .build-id/fd/d1ccd1ff7917ab020653147ab3bacf0a85b5b9 lib64/libglib-2.0.so.0.2000.5/fdd1ccd1ff7917ab020653147ab3bacf0a85b5b9 .build-id/e4/417ebb8762e5f2eee93c8011a71115ff5edad8 lib64/libgobject-2.0.so.0.2000.5/e4417ebb8762e5f2eee93c8011a71115ff5edad8 .build-id/93/1e49461f6df99104f0febcc52f6fed5e2efce6 usr/sbin/sshd/931e49461f6df99104f0febcc52f6fed5e2efce6 .build-id/da/b5f724c088f89fbd8304da553ed6cb30bbec96 usr/lib64/libgdk-x11-2.0.so.0.1600.6/dab5f724c088f89fbd8304da553ed6cb30bbec96 .build-id/f2/037a091ef36b591187a858d75e203690ea9409 usr/sbin/openvpn/f2037a091ef36b591187a858d75e203690ea9409 .build-id/a8/e4f743b40fb1fd8b85e2f9b88d93b661472b8f bin/find/a8e4f743b40fb1fd8b85e2f9b88d93b661472b8f .build-id/81/120aada06e68b1e85882925a0fc6d7345ef59a home/acme/bin/perf/81120aada06e68b1e85882925a0fc6d7345ef59a parisc:~# perf report 2> /dev/null | head -25 9.07% find find [.] 0x0000000000fb0e 3.29% perf libc-2.10.2.so [.] __GI_strcmp 3.19% find [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 2.70% find libc-2.10.2.so [.] __GI_memmove 2.62% perf [kernel.kallsyms] [k] vsnprintf 2.03% find libc-2.10.2.so [.] _int_malloc 2.02% perf [kernel.kallsyms] [k] format_decode 1.70% find [kernel.kallsyms] [k] n_tty_write 1.70% find [kernel.kallsyms] [k] half_md4_transform 1.67% find libc-2.10.2.so [.] _IO_vfprintf_internal 1.66% perf [kernel.kallsyms] [k] audit_free_aux 1.62% swapper [kernel.kallsyms] [k] mwait_idle_with_hints 1.58% find [kernel.kallsyms] [k] __kmalloc 1.35% find [kernel.kallsyms] [k] sched_clock_local 1.35% find [kernel.kallsyms] [k] ext4_check_dir_entry 1.35% find [kernel.kallsyms] [k] ext4_htree_store_dirent 1.35% find [kernel.kallsyms] [k] sys_write 1.35% find [e1000e] [k] e1000_clean 1.35% find [kernel.kallsyms] [k] _atomic_dec_and_lock 1.34% find [kernel.kallsyms] [k] __d_lookup parisc:~# Probably the next step is to have 'perf report' notice that there is a perf.data.tar.bz2 file in the same directory and look if it was already added to ~/.debug/. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263568672-30323-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-16perf symbols: The synthesized kernel modules MMAP must use the pathnamesArnaldo Carvalho de Melo
Since we use ->long_name in dsos__find now. Now 'perf buildid_list' is not duplicating those and managing to show the proper build-ids for the DSOs with hits: [root@doppio linux-2.6-tip]# perf buildid-list -H 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 9ffdcac0a7935922d1f04b6cc9029dfef0f066ef /lib/modules/2.6.33-rc4-tip+/kernel/arch/x86/crypto/aes-x86_64.ko 3aaf89c32ebfc438ff546c93597d41788e3e65f3 /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwl3945.ko 19f46033f73e1ec612937189bb118c5daba5a0c8 /lib/modules/2.6.33-rc4-tip+/kernel/net/mac80211/mac80211.ko 1772f014a7a7272859655acb0c64a20ab20b75ee /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 /lib64/libc-2.10.2.so 5c68f7afeb33309c78037e374b0deee84dd441f6 /lib64/libpthread-2.10.2.so e9c9ad5c138ef882e4507d2605645b597da43873 /bin/dbus-daemon bcda7d09eb6c9ee380dae0ed3d591d4311decc31 /lib64/libdbus-1.so.3.4.0 7cc449a77f48b85d6088114000e970ced613bed8 /usr/lib64/libcrypto.so.0.9.8k fdd1ccd1ff7917ab020653147ab3bacf0a85b5b9 /lib64/libglib-2.0.so.0.2000.5 e4417ebb8762e5f2eee93c8011a71115ff5edad8 /lib64/libgobject-2.0.so.0.2000.5 931e49461f6df99104f0febcc52f6fed5e2efce6 /usr/sbin/sshd dab5f724c088f89fbd8304da553ed6cb30bbec96 /usr/lib64/libgdk-x11-2.0.so.0.1600.6 f2037a091ef36b591187a858d75e203690ea9409 /usr/sbin/openvpn a8e4f743b40fb1fd8b85e2f9b88d93b661472b8f /bin/find 81120aada06e68b1e85882925a0fc6d7345ef59a /home/acme/bin/perf [root@doppio linux-2.6-tip]# Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263568672-30323-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-16perf buildid-list: Introduce --with-hits optionArnaldo Carvalho de Melo
Using this option 'perf buildid-list' will process all samples, marking the DSOs that had some hits to list just them. This in turn will be used by a new porcelain, 'perf archive', that will be just a shell script to create a tarball from the 'perf buildid-list --with-hits' output and the files cached by 'perf record' in ~/.debug. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263519930-22803-4-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-16perf symbols: Create thread__find_addr_map from thread__find_addr_locationArnaldo Carvalho de Melo
Because some tools will only want to know with maps had hits, not needing the full symbol resolution done by thread__find_addr_location. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263519930-22803-3-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-16perf record: Encode the domain while synthesizing MMAP eventsArnaldo Carvalho de Melo
In the past 'perf record' had to process only userspace MMAP events, the ones generated in the kernel, but after we reused the MMAP events to encode the module mapings we ended up adding them first to the list of userspace DSOs (dsos__user) and to the kernel one (dsos__kernel). Fix this by encoding the header.misc field and then using it, like other parts to decide the right DSOs list to insert/find. The gotcha here is that since the kernel puts zero in .misc, which isn't PERF_RECORD_MISC_KERNEL (1 << 1), to differentiate, we put 1 in .misc. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263519930-22803-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-16perf symbols: Use dso->long_name in dsos__find()Arnaldo Carvalho de Melo
If not we end up duplicating the module DSOs because first we insert them using the short name found in /proc/modules, then, when processing synthesized MMAP events we add them again. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263519930-22803-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 07:11:05 +0000