1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
|
/*
* arch/arm/mach-at91/pm_slow_clock.S
*
* Copyright (C) 2006 Savin Zlobec
*
* AT91SAM9 support:
* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/linkage.h>
#include <mach/hardware.h>
#include <mach/at91_pmc.h>
#ifdef CONFIG_ARCH_AT91RM9200
#include <mach/at91rm9200_mc.h>
#elif defined(CONFIG_ARCH_AT91CAP9)
#include <mach/at91cap9_ddrsdr.h>
#else
#include <mach/at91sam9_sdramc.h>
#endif
#ifdef CONFIG_ARCH_AT91SAM9263
/*
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
* handle those cases both here and in the Suspend-To-RAM support.
*/
#define AT91_SDRAMC AT91_SDRAMC0
#warning Assuming EB1 SDRAM controller is *NOT* used
#endif
/*
* When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
* clock during suspend by adjusting its prescalar and divisor.
* NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
* are errata regarding adjusting the prescalar and divisor.
*/
#undef SLOWDOWN_MASTER_CLOCK
#define MCKRDY_TIMEOUT 1000
#define MOSCRDY_TIMEOUT 1000
#define PLLALOCK_TIMEOUT 1000
#define PLLBLOCK_TIMEOUT 1000
/*
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
mov r4, #MCKRDY_TIMEOUT
1: sub r4, r4, #1
cmp r4, #0
beq 2f
ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
tst r3, #AT91_PMC_MCKRDY
beq 1b
2:
.endm
/*
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
mov r4, #MOSCRDY_TIMEOUT
1: sub r4, r4, #1
cmp r4, #0
beq 2f
ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
tst r3, #AT91_PMC_MOSCS
beq 1b
2:
.endm
/*
* Wait until PLLA has locked.
*/
.macro wait_pllalock
mov r4, #PLLALOCK_TIMEOUT
1: sub r4, r4, #1
cmp r4, #0
beq 2f
ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
tst r3, #AT91_PMC_LOCKA
beq 1b
2:
.endm
/*
* Wait until PLLB has locked.
*/
.macro wait_pllblock
mov r4, #PLLBLOCK_TIMEOUT
1: sub r4, r4, #1
cmp r4, #0
beq 2f
ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
tst r3, #AT91_PMC_LOCKB
beq 1b
2:
.endm
.text
ENTRY(at91_slow_clock)
/* Save registers on stack */
stmfd sp!, {r0 - r12, lr}
/*
* Register usage:
* R1 = Base address of AT91_PMC
* R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
* R3 = temporary register
* R4 = temporary register
*/
ldr r1, .at91_va_base_pmc
ldr r2, .at91_va_base_sdramc
/* Drain write buffer */
mcr p15, 0, r0, c7, c10, 4
#ifdef CONFIG_ARCH_AT91RM9200
/* Put SDRAM in self-refresh mode */
mov r3, #1
str r3, [r2, #AT91_SDRAMC_SRR]
#elif defined(CONFIG_ARCH_AT91CAP9)
/* Enable SDRAM self-refresh mode */
ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
str r3, .saved_sam9_lpr
mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
#else
/* Enable SDRAM self-refresh mode */
ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
str r3, .saved_sam9_lpr
mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
#endif
/* Save Master clock setting */
ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
str r3, .saved_mckr
/*
* Set the Master clock source to slow clock
*/
bic r3, r3, #AT91_PMC_CSS
str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
wait_mckrdy
#ifdef SLOWDOWN_MASTER_CLOCK
/*
* Set the Master Clock PRES and MDIV fields.
*
* See AT91RM9200 errata #27 and #28 for details.
*/
mov r3, #0
str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
wait_mckrdy
#endif
/* Save PLLA setting and disable it */
ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
str r3, .saved_pllar
mov r3, #AT91_PMC_PLLCOUNT
orr r3, r3, #(1 << 29) /* bit 29 always set */
str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
wait_pllalock
/* Save PLLB setting and disable it */
ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
str r3, .saved_pllbr
mov r3, #AT91_PMC_PLLCOUNT
str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
wait_pllblock
/* Turn off the main oscillator */
ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
bic r3, r3, #AT91_PMC_MOSCEN
str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
/* Wait for interrupt */
mcr p15, 0, r0, c7, c0, 4
/* Turn on the main oscillator */
ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
orr r3, r3, #AT91_PMC_MOSCEN
str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
wait_moscrdy
/* Restore PLLB setting */
ldr r3, .saved_pllbr
str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
wait_pllblock
/* Restore PLLA setting */
ldr r3, .saved_pllar
str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
wait_pllalock
#ifdef SLOWDOWN_MASTER_CLOCK
/*
* First set PRES if it was not 0,
* than set CSS and MDIV fields.
*
* See AT91RM9200 errata #27 and #28 for details.
*/
ldr r3, .saved_mckr
tst r3, #AT91_PMC_PRES
beq 2f
and r3, r3, #AT91_PMC_PRES
str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
wait_mckrdy
#endif
/*
* Restore master clock setting
*/
2: ldr r3, .saved_mckr
str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
wait_mckrdy
#ifdef CONFIG_ARCH_AT91RM9200
/* Do nothing - self-refresh is automatically disabled. */
#elif defined(CONFIG_ARCH_AT91CAP9)
/* Restore LPR on AT91CAP9 */
ldr r3, .saved_sam9_lpr
str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
#else
/* Restore LPR on AT91SAM9 */
ldr r3, .saved_sam9_lpr
str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
#endif
/* Restore registers, and return */
ldmfd sp!, {r0 - r12, pc}
.saved_mckr:
.word 0
.saved_pllar:
.word 0
.saved_pllbr:
.word 0
.saved_sam9_lpr:
.word 0
.at91_va_base_pmc:
.word AT91_VA_BASE_SYS + AT91_PMC
#ifdef CONFIG_ARCH_AT91RM9200
.at91_va_base_sdramc:
.word AT91_VA_BASE_SYS
#elif defined(CONFIG_ARCH_AT91CAP9)
.at91_va_base_sdramc:
.word AT91_VA_BASE_SYS + AT91_DDRSDRC
#else
.at91_va_base_sdramc:
.word AT91_VA_BASE_SYS + AT91_SDRAMC
#endif
ENTRY(at91_slow_clock_sz)
.word .-at91_slow_clock
|
