path: root/drivers/scsi/aacraid/rx.c

/*
 *	Adaptec AAC series RAID controller driver
 *	(c) Copyright 2001 Red Hat Inc.	<alan@redhat.com>
 *
 * based on the old aacraid driver that is..
 * Adaptec aacraid device driver for Linux.
 *
 * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, write to
 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Module Name:
 *  rx.c
 *
 * Abstract: Hardware miniport for Drawbridge specific hardware functions.
 *
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/completion.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <asm/semaphore.h>

#include <scsi/scsi_host.h>

#include "aacraid.h"

static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs)
{
	struct aac_dev *dev = dev_id;

	dprintk((KERN_DEBUG "aac_rx_intr(%d,%p,%p)\n", irq, dev_id, regs));
	if (dev->new_comm_interface) {
		u32 Index = rx_readl(dev, MUnit.OutboundQueue);
		if (Index == 0xFFFFFFFFL)
			Index = rx_readl(dev, MUnit.OutboundQueue);
		if (Index != 0xFFFFFFFFL) {
			do {
				if (aac_intr_normal(dev, Index)) {
					rx_writel(dev, MUnit.OutboundQueue, Index);
					rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
				}
				Index = rx_readl(dev, MUnit.OutboundQueue);
			} while (Index != 0xFFFFFFFFL);
			return IRQ_HANDLED;
		}
	} else {
		unsigned long bellbits;
		u8 intstat;
		intstat = rx_readb(dev, MUnit.OISR);
		/*
		 *	Read mask and invert because drawbridge is reversed.
		 *	This allows us to only service interrupts that have 
		 *	been enabled.
		 *	Check to see if this is our interrupt.  If it isn't just return
		 */
		if (intstat & ~(dev->OIMR)) 
		{
			bellbits = rx_readl(dev, OutboundDoorbellReg);
			if (bellbits & DoorBellPrintfReady) {
				aac_printf(dev, rx_readl (dev, IndexRegs.Mailbox[5]));
				rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
				rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
			}
			else if (bellbits & DoorBellAdapterNormCmdReady) {
				rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
				aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
			}
			else if (bellbits & DoorBellAdapterNormRespReady) {
				rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
				aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
			}
			else if (bellbits & DoorBellAdapterNormCmdNotFull) {
				rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
			}
			else if (bellbits & DoorBellAdapterNormRespNotFull) {
				rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
				rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
			}
			return IRQ_HANDLED;
		}
	}
	return IRQ_NONE;
}

/**
 *	aac_rx_disable_interrupt	-	Disable interrupts
 *	@dev: Adapter
 */

static void aac_rx_disable_interrupt(struct aac_dev *dev)
{
	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
}

/**
 *	rx_sync_cmd	-	send a command and wait
 *	@dev: Adapter
 *	@command: Command to execute
 *	@p1: first parameter
 *	@ret: adapter status
 *
 *	This routine will send a synchronous command to the adapter and wait 
 *	for its	completion.
 */

static int rx_sync_cmd(struct aac_dev *dev, u32 command,
	u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
	u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
{
	unsigned long start;
	int ok;
	/*
	 *	Write the command into Mailbox 0
	 */
	rx_writel(dev, InboundMailbox0, command);
	/*
	 *	Write the parameters into Mailboxes 1 - 6
	 */
	rx_writel(dev, InboundMailbox1, p1);
	rx_writel(dev, InboundMailbox2, p2);
	rx_writel(dev, InboundMailbox3, p3);
	rx_writel(dev, InboundMailbox4, p4);
	/*
	 *	Clear the synch command doorbell to start on a clean slate.
	 */
	rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
	/*
	 *	Disable doorbell interrupts
	 */
	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
	/*
	 *	Force the completion of the mask register write before issuing
	 *	the interrupt.
	 */
	rx_readb (dev, MUnit.OIMR);
	/*
	 *	Signal that there is a new synch command
	 */
	rx_writel(dev, InboundDoorbellReg, INBOUNDDOORBELL_0);

	ok = 0;
	start = jiffies;

	/*
	 *	Wait up to 30 seconds
	 */
	while (time_before(jiffies, start+30*HZ)) 
	{
		udelay(5);	/* Delay 5 microseconds to let Mon960 get info. */
		/*
		 *	Mon960 will set doorbell0 bit when it has completed the command.
		 */
		if (rx_readl(dev, OutboundDoorbellReg) & OUTBOUNDDOORBELL_0) {
			/*
			 *	Clear the doorbell.
			 */
			rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
			ok = 1;
			break;
		}
		/*
		 *	Yield the processor in case we are slow 
		 */
		msleep(1);
	}
	if (ok != 1) {
		/*
		 *	Restore interrupt mask even though we timed out
		 */
		if (dev->new_comm_interface)
			rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
		else
			rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
		return -ETIMEDOUT;
	}
	/*
	 *	Pull the synch status from Mailbox 0.
	 */
	if (status)
		*status = rx_readl(dev, IndexRegs.Mailbox[0]);
	if (r1)
		*r1 = rx_readl(dev, IndexRegs.Mailbox[1]);
	if (r2)
		*r2 = rx_readl(dev, IndexRegs.Mailbox[2]);
	if (r3)
		*r3 = rx_readl(dev, IndexRegs.Mailbox[3]);
	if (r4)
		*r4 = rx_readl(dev, IndexRegs.Mailbox[4]);
	/*
	 *	Clear the synch command doorbell.
	 */
	rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
	/*
	 *	Restore interrupt mask
	 */
	if (dev->new_comm_interface)
		rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
	else
		rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
	return 0;

}

/**
 *	aac_rx_interrupt_adapter	-	interrupt adapter
 *	@dev: Adapter
 *
 *	Send an interrupt to the i960 and breakpoint it.
 */

static void aac_rx_interrupt_adapter(struct aac_dev *dev)
{
	rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
}

/**
 *	aac_rx_notify_adapter		-	send an event to the adapter
 *	@dev: Adapter
 *	@event: Event to send
 *
 *	Notify the i960 that something it probably cares about has
 *	happened.
 */

static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event)
{
	switch (event) {

	case AdapNormCmdQue:
		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_1);
		break;
	case HostNormRespNotFull:
		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_4);
		break;
	case AdapNormRespQue:
		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_2);
		break;
	case HostNormCmdNotFull:
		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
		break;
	case HostShutdown:
//		rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0,
//		  NULL, NULL, NULL, NULL, NULL);
		break;
	case FastIo:
		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
		break;
	case AdapPrintfDone:
		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_5);
		break;
	default:
		BUG();
		break;
	}
}

/**
 *	aac_rx_start_adapter		-	activate adapter
 *	@dev:	Adapter
 *
 *	Start up processing on an i960 based AAC adapter
 */

static void aac_rx_start_adapter(struct aac_dev *dev)
{
	struct aac_init *init;

	init = dev->init;
	init->HostElapsedSeconds = cpu_to_le32(get_seconds());
	// We can only use a 32 bit address here
	rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
	  0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
}

/**
 *	aac_rx_check_health
 *	@dev: device to check if healthy
 *
 *	Will attempt to determine if the specified adapter is alive and
 *	capable of handling requests, returning 0 if alive.
 */
static int aac_rx_check_health(struct aac_dev *dev)
{
	u32 status = rx_readl(dev, MUnit.OMRx[0]);

	/*
	 *	Check to see if the board failed any self tests.
	 */
	if (status & SELF_TEST_FAILED)
		return -1;
	/*
	 *	Check to see if the board panic'd.
	 */
	if (status & KERNEL_PANIC) {
		char * buffer;
		struct POSTSTATUS {
			__le32 Post_Command;
			__le32 Post_Address;
		} * post;
		dma_addr_t paddr, baddr;
		int ret;

		if ((status & 0xFF000000L) == 0xBC000000L)
			return (status >> 16) & 0xFF;
		buffer = pci_alloc_consistent(dev->pdev, 512, &baddr);
		ret = -2;
		if (buffer == NULL)
			return ret;
		post = pci_alloc_consistent(dev->pdev,
		  sizeof(struct POSTSTATUS), &paddr);
		if (post == NULL) {
			pci_free_consistent(dev->pdev, 512, buffer, baddr);
			return ret;
		}
		memset(buffer, 0, 512);
		post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
		post->Post_Address = cpu_to_le32(baddr);
		rx_writel(dev, MUnit.IMRx[0], paddr);
		rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0,
		  NULL, NULL, NULL, NULL, NULL);
		pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
		  post, paddr);
		if ((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X'))) {
			ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10);
			ret <<= 4;
			ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10);
		}
		pci_free_consistent(dev->pdev, 512, buffer, baddr);
		return ret;
	}
	/*
	 *	Wait for the adapter to be up and running.
	 */
	if (!(status & KERNEL_UP_AND_RUNNING))
		return -3;
	/*
	 *	Everything is OK
	 */
	return 0;
}

/**
 *	aac_rx_send
 *	@fib: fib to issue
 *
 *	Will send a fib, returning 0 if successful.
 */
static int aac_rx_send(struct fib * fib)
{
	u64 addr = fib->hw_fib_pa;
	struct aac_dev *dev = fib->dev;
	volatile void __iomem *device = dev->regs.rx;
	u32 Index;

	dprintk((KERN_DEBUG "%p->aac_rx_send(%p->%llx)\n", dev, fib, addr));
	Index = rx_readl(dev, MUnit.InboundQueue);
	if (Index == 0xFFFFFFFFL)
		Index = rx_readl(dev, MUnit.InboundQueue);
	dprintk((KERN_DEBUG "Index = 0x%x\n", Index));
	if (Index == 0xFFFFFFFFL)
		return Index;
	device += Index;
	dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff),
	  (u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size)));
	writel((u32)(addr & 0xffffffff), device);
	device += sizeof(u32);
	writel((u32)(addr >> 32), device);
	device += sizeof(u32);
	writel(le16_to_cpu(fib->hw_fib->header.Size), device);
	rx_writel(dev, MUnit.InboundQueue, Index);
	dprintk((KERN_DEBUG "aac_rx_send - return 0\n"));
	return 0;
}

/**
 *	aac_rx_init	-	initialize an i960 based AAC card
 *	@dev: device to configure
 *
 *	Allocate and set up resources for the i960 based AAC variants. The 
 *	device_interface in the commregion will be allocated and linked 
 *	to the comm region.
 */

int aac_rx_init(struct aac_dev *dev)
{
	unsigned long start;
	unsigned long status;
	int instance;
	const char * name;

	instance = dev->id;
	name     = dev->name;

	/*
	 *	Check to see if the board panic'd while booting.
	 */
	/*
	 *	Check to see if the board failed any self tests.
	 */
	if (rx_readl(dev, MUnit.OMRx[0]) & SELF_TEST_FAILED) {
		printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
		goto error_iounmap;
	}
	/*
	 *	Check to see if the board panic'd while booting.
	 */
	if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) {
		printk(KERN_ERR "%s%d: adapter kernel panic.\n", dev->name, instance);
		goto error_iounmap;
	}
	/*
	 *	Check to see if the monitor panic'd while booting.
	 */
	if (rx_readl(dev, MUnit.OMRx[0]) & MONITOR_PANIC) {
		printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
		goto error_iounmap;
	}
	start = jiffies;
	/*
	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
	 */
	while ((!(rx_readl(dev, IndexRegs.Mailbox[7]) & KERNEL_UP_AND_RUNNING))
		|| (!(rx_readl(dev, MUnit.OMRx[0]) & KERNEL_UP_AND_RUNNING)))
	{
		if(time_after(jiffies, start+180*HZ))
		{
			status = rx_readl(dev, IndexRegs.Mailbox[7]);
			printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", 
					dev->name, instance, status);
			goto error_iounmap;
		}
		schedule_timeout_uninterruptible(1);
	}
	if (request_irq(dev->scsi_host_ptr->irq, aac_rx_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0) 
	{
		printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance);
		goto error_iounmap;
	}
	/*
	 *	Fill in the function dispatch table.
	 */
	dev->a_ops.adapter_interrupt = aac_rx_interrupt_adapter;
	dev->a_ops.adapter_disable_int = aac_rx_disable_interrupt;
	dev->a_ops.adapter_notify = aac_rx_notify_adapter;
	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
	dev->a_ops.adapter_check_health = aac_rx_check_health;
	dev->a_ops.adapter_send = aac_rx_send;

	/*
	 *	First clear out all interrupts.  Then enable the one's that we
	 *	can handle.
	 */
	rx_writeb(dev, MUnit.OIMR, 0xff);
	rx_writel(dev, MUnit.ODR, 0xffffffff);
	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);

	if (aac_init_adapter(dev) == NULL)
		goto error_irq;
	if (dev->new_comm_interface)
		rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);

	/*
	 *	Tell the adapter that all is configured, and it can start
	 *	accepting requests
	 */
	aac_rx_start_adapter(dev);
	return 0;

error_irq:
	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
	free_irq(dev->scsi_host_ptr->irq, (void *)dev);

error_iounmap:

	return -1;
}