Porting DVO stuff

Ported from Xorg intel 2d driver. Changed interfaces definitions, which needed
to be changed later if other device wants to use these DVO stuff.

1 files changed, 493 insertions, 0 deletions

diff --git a/linux-core/intel_dvo.c b/linux-core/intel_dvo.c
new file mode 100644
index 00000000..423b7514
--- /dev/null
+++ b/linux-core/intel_dvo.c
@@ -0,0 +1,493 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+/*
+ * Copyright 2006 Dave Airlie <airlied@linux.ie>
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "dvo.h"
+
+#define SIL164_ADDR	0x38
+#define CH7xxx_ADDR	0x76
+#define TFP410_ADDR	0x38
+
+extern struct intel_dvo_dev_ops sil164_ops;
+extern struct intel_dvo_dev_ops ch7xxx_ops;
+extern struct intel_dvo_dev_ops ivch_ops;
+extern struct intel_dvo_dev_ops tfp410_ops;
+extern struct intel_dvo_dev_ops ch7017_ops;
+
+struct intel_dvo_device intel_dvo_devices[] = {
+	{
+		.type = INTEL_DVO_CHIP_TMDS,
+		.name = "sil164",
+		.dvo_reg = DVOC,
+		.slave_addr = SIL164_ADDR,
+		.dev_ops = &sil164_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_TMDS,
+		.name = "ch7xxx",
+		.dvo_reg = DVOC,
+		.slave_addr = CH7xxx_ADDR,
+		.dev_ops = &ch7xxx_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_LVDS,
+		.name = "ivch",
+		.dvo_reg = DVOA,
+		.slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
+		.dev_ops = &ivch_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_TMDS,
+		.name = "tfp410",
+		.dvo_reg = DVOC,
+		.slave_addr = TFP410_ADDR,
+		.dev_ops = &tfp410_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_LVDS,
+		.name = "ch7017",
+		.dvo_reg = DVOC,
+		.slave_addr = 0x75,
+		.gpio = GPIOE,
+		.dev_ops = &ch7017_ops,
+	}
+};
+
+static void intel_dvo_dpms(struct drm_output *output, int mode)
+{
+	struct drm_i915_private *dev_priv = output->dev->dev_private;
+	struct intel_output *intel_output = output->driver_private;
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	u32 dvo_reg = dvo->dvo_reg;
+	u32 temp = I915_READ(dvo_reg);
+
+	if (mode == DPMSModeOn) {
+		I915_WRITE(dvo_reg, temp | DVO_ENABLE);
+		I915_READ(dvo_reg);
+		dvo->dev_ops->dpms(dvo, mode);
+	} else {
+		dvo->dev_ops->dpms(dvo, mode);
+		I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
+		I915_READ(dvo_reg);
+	}
+}
+
+static void intel_dvo_save(struct drm_output *output)
+{
+	struct drm_i915_private *dev_priv = output->dev->dev_private;
+	struct intel_output *intel_output = output->driver_private;
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	/* Each output should probably just save the registers it touches,
+	 * but for now, use more overkill.
+	 */
+	dev_priv->saveDVOA = I915_READ(DVOA);
+	dev_priv->saveDVOB = I915_READ(DVOB);
+	dev_priv->saveDVOC = I915_READ(DVOC);
+
+	dvo->dev_ops->save(dvo);
+}
+
+static void intel_dvo_restore(struct drm_output *output)
+{
+	struct drm_i915_private *dev_priv = output->dev->dev_private;
+	struct intel_output *intel_output = output->driver_private;
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	dvo->dev_ops->restore(dvo);
+
+	I915_WRITE(DVOA, dev_priv->saveDVOA);
+	I915_WRITE(DVOB, dev_priv->saveDVOB);
+	I915_WRITE(DVOC, dev_priv->saveDVOC);
+}
+
+static int intel_dvo_mode_valid(struct drm_output *output,
+				struct drm_display_mode *mode)
+{
+	struct intel_output *intel_output = output->driver_private;
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	if (mode->flags & V_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* XXX: Validate clock range */
+
+	if (dvo->panel_fixed_mode) {
+		if (mode->hdisplay > dvo->panel_fixed_mode->hdisplay)
+			return MODE_PANEL;
+		if (mode->vdisplay > dvo->panel_fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
+	return dvo->dev_ops->mode_valid(dvo, mode);
+}
+
+static bool intel_dvo_mode_fixup(struct drm_output *output,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	struct intel_output *intel_output = output->driver_private;
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	/* If we have timings from the BIOS for the panel, put them in
+	 * to the adjusted mode.  The CRTC will be set up for this mode,
+	 * with the panel scaling set up to source from the H/VDisplay
+	 * of the original mode.
+	 */
+	if (dvo->panel_fixed_mode != NULL) {
+#define C(x) adjusted_mode->x = dvo->panel_fixed_mode->x
+		C(hdisplay);
+		C(hsync_start);
+		C(hsync_end);
+		C(htotal);
+		C(vdisplay);
+		C(vsync_start);
+		C(vsync_end);
+		C(vtotal);
+		C(clock);
+		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
+#undef C
+	}
+
+	if (dvo->dev_ops->mode_fixup)
+		return dvo->dev_ops->mode_fixup(dvo, mode, adjusted_mode);
+
+	return true;
+}
+
+static void intel_dvo_mode_set(struct drm_output *output,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = output->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = output->crtc->driver_private;
+	struct intel_output *intel_output = output->driver_private;
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	int pipe = intel_crtc->pipe;
+	u32 dvo_val;
+	u32 dvo_reg = dvo->dvo_reg, dvo_srcdim_reg;
+	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+
+	switch (dvo_reg) {
+	case DVOA:
+	default:
+		dvo_srcdim_reg = DVOA_SRCDIM;
+		break;
+	case DVOB:
+		dvo_srcdim_reg = DVOB_SRCDIM;
+		break;
+	case DVOC:
+		dvo_srcdim_reg = DVOC_SRCDIM;
+		break;
+	}
+
+	dvo->dev_ops->mode_set(dvo, mode, adjusted_mode);
+
+	/* Save the data order, since I don't know what it should be set to. */
+	dvo_val = I915_READ(dvo_reg) &
+		  (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG);
+	dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |
+		   DVO_BLANK_ACTIVE_HIGH;
+
+	if (pipe == 1)
+		dvo_val |= DVO_PIPE_B_SELECT;
+	dvo_val |= DVO_PIPE_STALL;
+	if (adjusted_mode->flags & V_PHSYNC)
+		dvo_val |= DVO_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & V_PVSYNC)
+		dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
+
+	I915_WRITE(dpll_reg, I915_READ(dpll_reg) | DPLL_DVO_HIGH_SPEED);
+
+	/*I915_WRITE(DVOB_SRCDIM,
+	  (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
+	  (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/
+	I915_WRITE(dvo_srcdim_reg,
+		   (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
+		   (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));
+	/*I915_WRITE(DVOB, dvo_val);*/
+	I915_WRITE(dvo_reg, dvo_val);
+}
+
+/**
+ * Detect the output connection on our DVO device.
+ *
+ * Unimplemented.
+ */
+static enum drm_output_status intel_dvo_detect(struct drm_output *output)
+{
+	struct intel_output *intel_output = output->driver_private;
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	return dvo->dev_ops->detect(dvo);
+}
+
+static int intel_dvo_get_modes(struct drm_output *output)
+{
+	struct intel_output *intel_output = output->driver_private;
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	/* We should probably have an i2c driver get_modes function for those
+	 * devices which will have a fixed set of modes determined by the chip
+	 * (TV-out, for example), but for now with just TMDS and LVDS,
+	 * that's not the case.
+	 */
+	intel_ddc_get_modes(output);
+	if (!list_empty(&output->probed_modes))
+		return 1;
+
+#if 0
+	if (intel_output->i2c_drv->vid_rec->get_modes)
+	{
+		modes = intel_output->i2c_drv->vid_rec->get_modes (intel_output->i2c_drv->dev_priv);
+		if (modes != NULL)
+			return modes;
+	}
+#endif
+
+	if (dvo->panel_fixed_mode != NULL) {
+		struct drm_display_mode *mode;
+		mode = drm_mode_duplicate(output->dev, dvo->panel_fixed_mode);
+		if (mode) {
+			drm_mode_probed_add(output, mode);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static void intel_dvo_destroy (struct drm_output *output)
+{
+	struct intel_output *intel_output = output->driver_private;
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	if (dvo) {
+		if (dvo->dev_ops->destroy)
+			dvo->dev_ops->destroy(dvo);
+		if (dvo->panel_fixed_mode)
+			kfree(dvo->panel_fixed_mode);
+		/* no need, in i830_dvoices[] now */
+		//kfree(dvo);
+	}
+	if (intel_output) {
+		if (intel_output->i2c_bus)
+			intel_i2c_destroy(intel_output->i2c_bus);
+		if (intel_output->ddc_bus)
+			intel_i2c_destroy(intel_output->ddc_bus);
+		kfree(intel_output);
+		output->driver_private = NULL;
+	}
+}
+
+#ifdef RANDR_GET_CRTC_INTERFACE
+static struct drm_crtc *intel_dvo_get_crtc(struct drm_output *output)
+{
+	struct drm_device *dev = output->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_output *intel_output = output->driver_private;
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	int pipe = !!(I915_READ(dvo->dvo_reg) & SDVO_PIPE_B_SELECT);
+
+	return intel_pipe_to_crtc(pScrn, pipe);
+}
+#endif
+
+
+static const struct drm_output_funcs intel_dvo_output_funcs = {
+	.dpms = intel_dvo_dpms,
+	.save = intel_dvo_save,
+	.restore = intel_dvo_restore,
+	.mode_valid = intel_dvo_mode_valid,
+	.mode_fixup = intel_dvo_mode_fixup,
+	.prepare = intel_output_prepare,
+	.mode_set = intel_dvo_mode_set,
+	.commit = intel_output_commit,
+	.detect = intel_dvo_detect,
+	.get_modes = intel_dvo_get_modes,
+	.cleanup = intel_dvo_destroy
+};
+
+/**
+ * Attempts to get a fixed panel timing for LVDS (currently only the i830).
+ *
+ * Other chips with DVO LVDS will need to extend this to deal with the LVDS
+ * chip being on DVOB/C and having multiple pipes.
+ */
+static struct drm_display_mode *
+intel_dvo_get_current_mode (struct drm_output *output)
+{
+	struct drm_device *dev = output->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_output *intel_output = output->driver_private;
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	uint32_t dvo_reg = dvo->dvo_reg;
+	uint32_t dvo_val = I915_READ(dvo_reg);
+	struct drm_display_mode *mode = NULL;
+
+	/* If the DVO port is active, that'll be the LVDS, so we can pull out
+	 * its timings to get how the BIOS set up the panel.
+	 */
+	if (dvo_val & DVO_ENABLE) {
+		struct drm_crtc *crtc;
+		int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
+
+		crtc = intel_get_crtc_from_pipe(dev, pipe);
+		if (crtc) {
+			mode = intel_crtc_mode_get(dev, crtc);
+
+			if (mode) {
+				mode->type |= DRM_MODE_TYPE_PREFERRED;
+				if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
+					mode->flags |= V_PHSYNC;
+				if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)
+					mode->flags |= V_PVSYNC;
+			}
+		}
+	}
+	return mode;
+}
+
+void intel_dvo_init(struct drm_device *dev)
+{
+	struct intel_output *intel_output;
+	struct intel_dvo_device *dvo;
+	struct intel_i2c_chan *i2cbus = NULL;
+	int ret = 0;
+	int i;
+	int gpio_inited = 0;
+	int connector = ConnectorUnknown;
+
+	intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL);
+	if (!intel_output)
+		return;
+
+	/* Set up the DDC bus */
+	intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "DVODDC_D");
+	if (!intel_output->ddc_bus)
+		goto free_intel;
+
+	/* Now, try to find a controller */
+	for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
+		struct drm_output *output = NULL;
+		int gpio;
+
+		dvo = &intel_dvo_devices[i];
+
+		/* Allow the I2C driver info to specify the GPIO to be used in
+		 * special cases, but otherwise default to what's defined
+		 * in the spec.
+		 */
+		if (dvo->gpio != 0)
+			gpio = dvo->gpio;
+		else if (dvo->type == INTEL_DVO_CHIP_LVDS)
+			gpio = GPIOB;
+		else
+			gpio = GPIOE;
+
+		/* Set up the I2C bus necessary for the chip we're probing.
+		 * It appears that everything is on GPIOE except for panels
+		 * on i830 laptops, which are on GPIOB (DVOA).
+		 */
+		if (gpio_inited != gpio) {
+			if (i2cbus != NULL)
+				intel_i2c_destroy(i2cbus);
+			if (!(i2cbus = intel_i2c_create(dev, gpio,
+				gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
+				continue;
+			}
+			gpio_inited = gpio;
+		}
+
+		if (dvo->dev_ops!= NULL)
+			ret = dvo->dev_ops->init(dvo, i2cbus);
+		else
+			ret = false;
+
+		if (!ret)
+			continue;
+
+		intel_output->type = INTEL_OUTPUT_DVO;
+		switch (dvo->type) {
+		case INTEL_DVO_CHIP_TMDS:
+			connector = ConnectorDVID;
+			output = drm_output_create(dev, &intel_dvo_output_funcs,
+					DRM_MODE_OUTPUT_TMDS);
+			break;
+		case INTEL_DVO_CHIP_LVDS:
+			connector = ConnectorLVDS;
+			output = drm_output_create(dev, &intel_dvo_output_funcs,
+					DRM_MODE_OUTPUT_LVDS);
+			break;
+		}
+		if (output == NULL) {
+			dvo->dev_ops->destroy(dvo);
+			goto free_i2c;
+		}
+
+		output->driver_private = intel_output;
+		output->display_info.subpixel_order = SubPixelHorizontalRGB;
+		output->interlace_allowed = false;
+		output->doublescan_allowed = false;
+
+		intel_output->dev_priv = dvo;
+		intel_output->i2c_bus = i2cbus;
+
+		if (dvo->type == INTEL_DVO_CHIP_LVDS) {
+			/* For our LVDS chipsets, we should hopefully be able
+			 * to dig the fixed panel mode out of the BIOS data.
+			 * However, it's in a different format from the BIOS
+			 * data on chipsets with integrated LVDS (stored in AIM
+			 * headers, likely), so for now, just get the current
+			 * mode being output through DVO.
+			 */
+			dvo->panel_fixed_mode = intel_dvo_get_current_mode(output);
+			dvo->panel_wants_dither = true;
+		}
+
+		drm_output_attach_property(output,
+				dev->mode_config.connector_type_property,
+				connector);
+		return;
+	}
+
+free_i2c:
+	intel_i2c_destroy(intel_output->ddc_bus);
+	/* Didn't find a chip, so tear down. */
+	if (i2cbus != NULL)
+		intel_i2c_destroy(i2cbus);
+free_intel:
+	kfree(intel_output);
+}