| Age | Commit message (Collapse) | Author |
|---|
|
is ok to be shared, it will be passive on BSD.
|
|
|
|
This is Egberts code, ported to Pauls framework by me..
|
|
code duplication, and it also hands you the map pointer so you don't
need to re-find it.
- Remove the permanent maps flag. Instead, for register and framebuffer
maps, we always check whether there's already a map of that type and
offset around. Move the Radeon map initialization into presetup (first
open) so it happens again after every takedown.
- Remove the split cleanup of maps between driver takedown (last close) and
cleanup (module unload). Instead, always tear down maps on takedown,
and drivers can recreate them on first open.
- Make MGA always use addmap, instead of allocating consistent memory in
the PCI case and then faking up a map for it, which accomplished nearly
the same thing, in a different order. Note that the maps are exposed to
the user again: we may want to expose a flag to avoid this, but it's
not a security concern, and saves us a lot of code.
- Remove rmmaps in the MGA driver. Since the function is only called during
takedown anyway, we can let them die a natural death.
- Make removal of maps happen in one function, which is called by both
drm_takedown and drm_rmmap_ioctl.
Reviewed by: idr (previous revision) Tested on: mga (old/new/pci dma),
radeon, savage
|
|
|
|
the code for it, rather than introducing something that isn't going to
work 100% of the time.
|
|
didn't have it.
|
|
|
|
|
|
|
|
|
|
zero does not mean no privs, instead it grants write access
_DRM_READ_ONLY only applies to non-root users. Problem is only in CVS,
initmaps are not in the kernel yet.
|
|
zero does not mean no privs, instead it grants write access
_DRM_READ_ONLY only applies to non-root users. Problem is only in CVS,
initmaps are not in the kernel yet.
|
|
radeonfb.
|
|
|
|
This patch adds serveral new ioctls and a new query to get_param query to
support PCI MGA cards.
Two ioctls were added to implement interrupt based waiting. With this
change, the client-side driver no longer needs to map the primary DMA
region or the MMIO region. Previously, end-of-frame waiting was done by
busy waiting in the client-side driver until one of the MMIO registers
(the current DMA pointer) matched a pointer to the end of primary DMA
space. By using interrupts, the busy waiting and the extra mappings are
removed.
A third ioctl was added to bootstrap DMA. This ioctl, which is used by the
X-server, moves a *LOT* of code from the X-server into the kernel. This
allows the kernel to do whatever needs to be done to setup DMA buffers.
The entire process and the locations of the buffers are hidden from
user-mode.
Additionally, a get_param query was added to differentiate between G4x0
cards and G550 cards. A gap was left in the numbering sequence so that,
if needed, G450 cards could be distinguished from G400 cards. According
to Ville Syrjälä, the G4x0 cards and the G550 cards handle
anisotropic filtering differently. This seems the most compatible way
to let the client-side driver know which card it's own. Doing this very
small change now eliminates the need to bump the DRM minor version
twice.
http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2
A number of ioctl handlers in linux-core were also modified so that they
could be called in-kernel. In these cases, the in-kernel callable
version kept the existing name (e.g., drm_agp_acquire) and the ioctl
handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl).
This patch also replaces the drm_agp_do_release function with
drm_agp_release. drm_agp_release (drm_core_agp_release in the previous
patch) is very similar to drm_agp_do_release, and I saw no reason to
have both.
This commit *breaks the build* on BSD. Eric said that he would make the
required updates to the BSD side soon.
Xorg bug: 3259 Reviewed by: Eric Anholt
|
|
|
|
|
|
There were two problems. First, the 'warp' and 'primary' pointers weren't
cleared, so mga_do_cleanup_dma, which gets called multiple times, would
try to ioremapfree them multiple times. This resulted in the new error
messages to syslog. The second problem was the, since the dev_private
structure isn't reallocated and cleaned out in mga_do_init_dma, when
the server is reloaded idle-waits would wait for impossible values.
I have given this patch some more riggorous testing. This includes:
- Load module, start server, run GL app, stop server, unload module.
- Load module, start server, run GL app, stop server, unload module, reload
module, restart server, run GL app.
- Load module, start server, run GL app, stop server, restart server, run
GL app, stop server, unload module.
In all three cases, everything worked as expected. Please let me know if
there are any further regressions with this patch.
Xorg bug: 3408 Reported by: Chris Rankin
|
|
From: Dave Airlie + Benjamin Herrenschmidt
|
|
|
|
|
|
time. Remove it and an out-dated comment.
|
|
the driver is loaded and is always expected to be around, it should
only be deallocated when the driver is unloaded.
Xorg bug: #3408 Reported by: Chris Rankin
|
|
There's two choices when fb is or isn't loaded as we treat ourselves as a
PCI driver in the latter case.
If we are a PCI driver, then register the suspend/resume functions
directly. If not, then we register as a sysdev and pick up the
suspend/resume actions and pump them down into a generic *power
function.
It'll be nice when this little mess is sorted out with regard to being a
real PCI driver ;-/
|
|
that a device absolutely is, absolutely is not, or may or may not be
AGP. Modify the i915 DRM to use this to force all i9x5 devices to be
"AGP" (even the PCI-e devices).
Reported by: Lukas Hejtmanek
|
|
|
|
64-bit fixes. Bumped driver date and patchlevel.
|
|
two routines (one for G200 and one for G400) were replaced with static
const variables and a single function that returns the correct size.
The code to generate an error if the allocated WARP region is too small
was refactored from mga_warp_install_{g200,g400}_microcode to
mga_wrap_install_microcode.
mga_warp_microcode_size is global to the MGA DRM because it will soon be
used by code in another file.
|
|
|
|
is now allocated (and partially filled in) by the new
mga_driver_preinit function.
This allows the driver to detect the type of card (i.e., G200 class vs.
G400 class) on its own. The chipset value passed to mga_dma_init is now
ignored. This same technique is used by the radeon DRM.
As a result of this, mga_driver_pretakedown was converted to
mga_driver_postcleanup. This routine gets called in some other places
than might be expected, and it sets the dev_private pointer to NULL.
That little gem took over an hour to track down. :(
|
|
From: Christopher Allen Wing <wingc@engin.umich.edu> Signed-off-by: Dave
Airlie <airlied@linux.ie>
|
|
platform-specific drm_device_is_agp function. Added implementation of
this function the the Linux-specific portion of the MGA driver to
detect PCI G450 cards. Added code to the Linux-specific portion of the
generic DRM layer to not initialize AGP infrastructure if the card is
not AGP (this matches what already existed in BSD).
Bumped the driver date and the driver patch-level for MGA.
This mostly fixes bugzilla #3248. The BSD side still needs an
implementation of mga_driver_device_is_agp.
|
|
|
|
is no AGP memory acquired.
|
|
|
|
with IOMMUs and such. There is one usage of the forbidden vtophys()
left in drm_scatter.c which will be fixed up soon. This required a KPI
change for drm_pci_alloc/free() to return/use a drm_dma_handle_t that
keeps track of os-specific bits, rather than just passing around the
vaddr/busaddr/size.
Submitted by: Tonnerre Lombard (partially) Tested on: FreeBSD: Rage128
AGP/PCI Linux: Savage4 AGP/PCI
|
|
sleep-with- mutex held. This probably ought to be an os-independent
sleep function ala DRM_USLEEP.
|
|
|
|
1) Security fix: Stopped possible MMIO access to PCI DMA area for the
unichrome Pro.
2) Fixed an odd cpu usage problem by padding small AGP DMA submissions.
Bumped patchlevel.
|
|
|
|
|
|
New PCI command parser. Moved from via_dma.c to via_verifier.c so functions
with similar functionality are close to eachother.
Moved video related functions to via_video.c, which might be extended in
the future, as new video functionality is added.
New device-specific generic IRQ IOCTL, similar to the general VBLANK IOCTL,
but with support for multiple device IRQ sources and functionality.
Support for Unichrome Pro PM800/CN400 video DMA commands in verifier and
PCI parser.
Support for Unichrome Pro PM800/CN400 HQV IRQs in the new generic IRQ
IOCTL.
Bumped minor. New version 2.6.0.
|
|
|
|
From: Tungsten Graphics Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
Inc.)
|
|
r200
|
|
1. Initialize futex locks to zero on device init.
2. Remove some stray defines from via_drm.h
3. Prepare via_drm.h for drm client inclusion. The goal is to share a
common file with common definitions.
4. Sync shared / shared-core via_drm.h
5. Bump minor, because of the futex lock initialization.
|
|
- don't waste DMA memory when small command buffers are flushed
- minimized padding with noops
- slightly simplified faked DMA flushing
|
|
after ~5min: buffer aging was subtly broken. Part of this may have also
affected vertex DMA buffer aging and client-side texture heap aging,
though with less fatal consequences. Bumped minor version and driver
date.
|
