Age | Commit message (Collapse) | Author | |
---|---|---|---|
2007-06-24 | r300: Initial work on merging the real and generated vertex program functions. | Oliver McFadden | |
2007-06-24 | r300: Should use inst_count not 0 for R300_PVS_CNTL_3_PROGRAM_UNKNOWN_SHIFT. | Oliver McFadden | |
2007-06-24 | r300: The vpi, vpp, and vps counts are already initialized; don't do it twice. | Oliver McFadden | |
2007-06-24 | r300: Clean up the vertex program state code slightly; still needs lots of work. | Oliver McFadden | |
2007-06-24 | r300: Vertex program position end bits are known. | Oliver McFadden | |
Possibly performance may improve by setting it to the last instruction that writes result.position, rather than the last instruction in the vertex program. | |||
2007-06-24 | r300: Removed unused vap_param structure. | Oliver McFadden | |
2007-06-24 | r300: Cleaned up long lines in the vertex functions. | Oliver McFadden | |
2007-06-24 | r300: Setup the default state for polygon offset point/line. | Oliver McFadden | |
I believe there are still bugs with all polygon offset types. The point and line types may need to be handled specially, too. This shouldn't break anything because it just enabled the occlusion control bits for polygon offset. | |||
2007-06-24 | r300: Cleaned up the r300SetupVertexShader function. | Oliver McFadden | |
2007-06-24 | r300: Cleaned up the r300SetupPixelShader function. | Oliver McFadden | |
2007-06-24 | r300: Trivial clean up in radeon_lock.h. | Oliver McFadden | |
2007-06-21 | r300: Corrected a bug in r300LineWidth. | Oliver McFadden | |
Thanks to Panagiotis Papadakos for reporting it. | |||
2007-06-10 | r300: i can't see why we fallback for polygon offset line/fill | Dave Airlie | |
2007-06-07 | r300: Added a comment regarding the R300_VAP_CLIP registers. | Oliver McFadden | |
2007-06-07 | r300: Removed a "don't think this is needed" comment, it actually is needed. | Oliver McFadden | |
According to the comment you do not need to setup INPUT_CNTL when using vertex buffers. However, not doing so results in a lockup. | |||
2007-06-07 | r300: Explain the R300_VAP_OUTPUT_VTX_FMT_1 register. | Oliver McFadden | |
2007-06-07 | r300: Cleaned up long lines in r300Choose8888TexFormat. | Oliver McFadden | |
2007-06-02 | r300: fix non-tcl rs4xx again. | Dave Airlie | |
2007-05-30 | Fix r300SetTexOffset for big endian platforms. | Michel Dänzer | |
This was broken by the unification of the texture format table. | |||
2007-05-30 | r300: Corrected r300PointSize based on dumping the blob. | Oliver McFadden | |
The OpenGL specification also verifies the default point size should be 1.0. | |||
2007-05-30 | r300: Corrected r300LineWidth based on dumping the blob. | Oliver McFadden | |
The OpenGL specification also verifies the default line width should be 1.0. | |||
2007-05-30 | r300: Removed goto statement in r300SetupRSUnit. | Oliver McFadden | |
2007-05-30 | r300: Cleaned up r300SetupRSUnit. | Oliver McFadden | |
2007-05-30 | r300: Cleaned up the state atom checking functions. | Oliver McFadden | |
2007-05-30 | r300: Cleaned up the state atom debugging code. | Oliver McFadden | |
2007-05-30 | r300: Use compile-time endian detection in r300_state.c as well as ↵ | Oliver McFadden | |
r300_texstate.c. Probably best to not mix-and-match compile-time and run-time detection... | |||
2007-05-30 | r300: Document registers 0x2220 to 0x2230. | Oliver McFadden | |
These registers are per-pixel and per-vertex X and Y clipping planes. | |||
2007-05-30 | r300: Only support size 4 ELTs; this is what Mesa provides. | Oliver McFadden | |
2007-05-30 | r300: Use the CP_PACKET3 macro for Type 3 packets. | Oliver McFadden | |
I haven't converted all of the Type 3 packets to the CP_PACKET3 macro yet because some of the Type 3 packet defines are missing from the R300 register definition file. These defines need to be copied from DRM and Mesa into the R300 register definition file then copied into both DRM and Mesa. | |||
2007-05-30 | r300: Removed the (completely broken since new VBO branch) OPTIMIZE_ELTS path. | Oliver McFadden | |
The VTXFMT code was broken by the new VBO branch and the OPTIMIZE_ELTS path relied on the VTXFMT code... I'm not even sure if the OPTIMIZE_ELTS path ever worked; the testing that I did after minimizing the code duplication would have taken the same path as the non-OPTIMIZE_ELTS code. | |||
2007-05-30 | r300: Cleaned up the AOS code in r300_render.c. | Oliver McFadden | |
2007-05-30 | r300: Added a comment in r300VAPInputCntl0. | Oliver McFadden | |
2007-05-30 | r300: Cleaned up r300DestroyTexObj. | Oliver McFadden | |
2007-05-30 | r300: R300_SE_VTE_CNTL applies to both non-TCL and TCL hardware. | Oliver McFadden | |
See r300ResetHwState. | |||
2007-05-27 | Revert "r300: Removed the R300_RS_INTERP_[0-9]_UNKNOWN (magic) defines." | Oliver McFadden | |
This reverts commit bb3558e6517209086cf8426bbe4743da50351158. This commit caused a regression reported by Markus Amsler <markus.amsler@oribi.org>. Apparently these defines are required, although I'm not sure why. | |||
2007-05-26 | r300: Rearranged the DWORD construction in r300VAPInputRoute0 for clarity. | Oliver McFadden | |
Doesn't actually change anything; just makes it easier to read. | |||
2007-05-26 | r300: Removed duplicate AOS format defines; already defined in r300_reg.h. | Oliver McFadden | |
2007-05-26 | r300: Removed unused aos_reg variable. | Oliver McFadden | |
2007-05-26 | r300: Use "rmesa" not "r300" in r300_emit.c; some of the macros require "rmesa". | Oliver McFadden | |
2007-05-26 | r300: Cleaned up the non-TCL RENDERINPUTS, etc. | Oliver McFadden | |
2007-05-26 | r300: Whitespace cleanup in r300_emit.c. | Oliver McFadden | |
2007-05-26 | r300: Added the r300VAPInputCntl0 function. | Oliver McFadden | |
The function just returns the hard-coded value (0x5555) even though we have no idea what this means... | |||
2007-05-26 | r300: Added r300VAPOutputCntl0 and r300VAPOutputCntl1 to r300_emit.c. | Oliver McFadden | |
2007-05-26 | r300: Removed R300_PFS_NODE_LAST_NODE replaced by R300_PFS_NODE_OUTPUT_COLOR. | Oliver McFadden | |
2007-05-26 | r300: Renamed the t_vic function. | Oliver McFadden | |
2007-05-26 | r300: Renamed the t_vir0 and t_vir1 functions. | Oliver McFadden | |
2007-05-25 | r300: Renamed "dt" to "attribptr" in the t_vir0 function. | Oliver McFadden | |
2007-05-25 | r300: Specify the type in the t_vir0 function. | Oliver McFadden | |
2007-05-25 | r300: Cleaned up t_vir0 and t_vir1 slightly. | Oliver McFadden | |
2007-05-25 | r300: Use C style comments in r300_emit.c. | Oliver McFadden | |