aboutsummaryrefslogtreecommitdiff
path: root/doc/man/crystfel_geometry.5
diff options
context:
space:
mode:
authorThomas White <taw@physics.org>2012-02-29 17:02:38 +0100
committerThomas White <taw@physics.org>2012-02-29 17:02:38 +0100
commit073f9ca18dcb0ae11aae8358b9fb964ef2ae3f88 (patch)
treeb1c6372202f3a3854fb44f160324a13844111e0f /doc/man/crystfel_geometry.5
parentf09527699de496a1079bd9063f2356677afe0c68 (diff)
Documentation update
Diffstat (limited to 'doc/man/crystfel_geometry.5')
-rw-r--r--doc/man/crystfel_geometry.5169
1 files changed, 169 insertions, 0 deletions
diff --git a/doc/man/crystfel_geometry.5 b/doc/man/crystfel_geometry.5
new file mode 100644
index 00000000..4b3b7aee
--- /dev/null
+++ b/doc/man/crystfel_geometry.5
@@ -0,0 +1,169 @@
+.\"
+.\" Geometry man page
+.\"
+.\" Copyright © 2012 Thomas White <taw@physics.org>
+.\"
+.\" Part of CrystFEL - crystallography with a FEL
+.\"
+
+.TH CRYSTFEL\_GEOMETRY 5
+
+.SH CRYSTFEL DETECTOR GEOMETRY FILES
+
+The detector geometry is taken from a text file rather than hardcoded into the
+program. Programs which care about the geometry (particularly indexamajig,
+pattern_sim and powder_plot) take an argument "--geometry=<file>"
+(or "-g <file>"), where <file> contains the geometry.
+
+A flexible (and pedantic) representation of the detector has been developed to
+avoid all possible sources of ambiguity. CrystFEL's representation of a
+detector is broken down into one or more "panels", each of which has its own
+camera length, geometry, resolution and so on. Each panel fits into the overall
+image taken from the HDF5 file, defined by minimum and maximum coordinates in
+the "fast scan" and "slow scan" directions. "Fast scan" refers to the direction
+whose coordinate changes most quickly as the bytes in the HDF5 file are moved
+through. The coordinates are specified inclusively, meaning that a minimum of 0
+and a maximum of 9 results in a width of ten pixels. Counting begins from zero.
+All pixels in the image must be assigned to a panel - gaps are not permitted.
+
+In the current version, panels are assumed to be perpendicular to the incident
+beam and to have their edges parallel. Within these limitations, any geometry
+can be constructed.
+
+The job of the geometry file is to establish a relationship between the array
+of pixel values in the HDF5 file, defined in terms only of the "fast scan" and
+"slow scan" directions, and the laboratory coordinate system defined as follows:
+
++z is the beam direction, and points along the beam (i.e. away from the source)
+.br
++y points towards the zenith (ceiling).
+.br
++x completes the right-handed coordinate system.
+
+Naively speaking, this means that CrystFEL at the images from the "into the
+beam" perspective, but please avoid thinking of things in this way. It's much
+better to consider the precise way in which the coordinates are mapped.
+
+The syntax for a simple geometry might include several entires of the following
+form:
+
+; Lines which should be ignored start with a semicolon.
+
+; The name before the slash indicates which panel is referred to. You can use
+.br
+; any name as long as it doesn't start with "bad" (see below).
+.br
+; The range of pixels in the HDF5 file which correspond to a panel are given:
+.br
+panel0/min_fs = 0
+.br
+panel0/min_ss = 0
+.br
+panel0/max_fs = 193
+.br
+panel0/max_ss = 184
+
+; The readout direction (x, y or 0). If more than three peaks are found in
+.br
+; the same readout region, they are all discarded. This helps to avoid
+.br
+; problems due to streaks appearing along the readout direction.
+.br
+; If the badrow direction is '-', then the culling described above will not
+.br
+; be performed for this panel.
+.br
+panel0/badrow_direction = -
+
+; The resolution (in pixels per metre) for this panel
+.br
+panel0/res = 9090.91
+
+; The characteristic peak separation in pixels. The peak detection will assume
+.br
+; that genuine peaks are separated by at least this amount.
+.br
+panel0/peak_sep = 6.0
+
+; You need to specify the peak integration radius, which should be a little
+.br
+; larger than the actual radii of the peaks in pixels
+.br
+panel0/integr_radius = 2.0
+
+; The camera length (in metres) for this panel
+.br
+; You can also specify the HDF path to a scalar floating point value containing
+.br
+; the camera length in millimetres.
+.br
+panel0/clen = /LCLS/detectorPosition
+
+; For this panel, the fast and slow scan directions correspond to the given
+.br
+; directions in the lab coordinate system described above, measured in pixels.
+.br
+panel0/fs = +y
+.br
+panel0/ss = -x
+
+; The corner of this panel, defined as the first point in the panel to appear in
+.br
+; the HDF5 file, is now given a position in the lab coordinate system.
+.br
+; Note that "first point in the panel" is a conceptual simplification. We refer
+.br
+; to that corner, and to the very corner of the pixel - NOT, for example, to the
+.br
+; centre of the first pixel to appear.
+.br
+panel0/corner_x = 429.39
+.br
+panel0/corner_y = -17.30
+
+; You can suppress indexing for this panel if required, by setting "no_index" to
+.br
+; "true" or "1".
+.br
+panel0/no_index = 0
+
+; You can also specify bad regions. Peaks with centroid locations within such
+.br
+; a region will not be integrated nor indexed. Bad regions are specified in
+.br
+; pixel units, but in the lab coordinate system (i.e. "y" points at the ceiling,
+.br
+; "z" is the beam direction and "x" completes the right-handed system).
+.br
+badregionA/min_x = -20.0
+.br
+badregionA/max_x = +20.0
+.br
+badregionA/min_y = -100.0
+.br
+badregionA/max_y = +100.0
+
+; If you have a bad pixel mask, you can include it in the HDF5 file as an
+.br
+; unsigned 16-bit integer array of the same size as the data. You need to
+.br
+; give its path within each HDF5 file, and two bitmasks. The pixel is
+.br
+; considered good if all of the bits which are set in "mask_good" are set, AND
+.br
+; if none of the bits which are set in "mask_bad" are set.
+.br
+mask = /processing/hitfinder/masks
+.br
+mask_good = 0x27
+.br
+mask_bad = 0x00
+
+; Any of the per-panel values can be given without a panel prefix, for example:
+.br
+peak_sep = 6.0
+.br
+; in which case the value will be used for all *subsequent* panels.
+
+
+See the "examples" folder for some examples (look at the ones ending in .geom).